<p dir="ltr">Conducting polymers have garnered enormous attention due to their unique properties, including tunable chemical structure, high flexibility, solution processability, and biocompatibility. They hold promising applications in flexible electronics, renewable energies, sensing, and healthcare. Despite notable progress in conducting polymers over the past few decades, most of them still suffer from complicated synthesis routes, limited processability, low electrical conductivity, and poor ambient stability compared to their inorganic counterparts. Additionally, the susceptibility of conducting polymers to high temperatures makes them not applicable in real-life electronics. To address the challenges of developing high-performance and stable conducting polymers, we present two key approaches: dopant innovation for polymer-dopant interaction engineering and the discovery of new conjugated polymer hosts. From the perspective of dopant design, we first utilize cross-linkable chlorosilanes (C-Si) to design thermally and chemically stable conductive polymer composites. C-Si can form robust siloxane networks and simultaneously<i> </i>dope the host conjugated polymers. Besides, we have introduced a new class of dopants, namely aromatic ionic dopants (AIDs). The use of AIDs allows for the separation of doping and charge compensation, two processes involved in molecular doping, and therefore leads to highly efficient doping and thermally stable doped systems. We then provide insights into the design of novel conjugated polymer hosts. Remarkably, we have developed the first thermodynamically stable n-type conducting polymer, n-doped Poly (3,7-dihydrobenzo[1,2-b:4,5-b′]difuran-2,6-dione) (n-PBDF). n-PBDF is synthesized from a simple and scalable route, involving oxidative polymerization and reductive doping in one pot in the air. The n-PBDF ink is solution processable with excellent ink stability and the n-PBDF thin film is highly conductive, transparent, patternable, and robust. In addition, precise control over the doping levels of n-PBDF has been achieved through chemical doping and dedoping. By tuning the n-PBDF thin films between highly doped and dedoped states, the system shows controllable conductivity, optical properties, and energetics, thereby offering potential applications in a variety of organic electronics. Overall, this research advances the fundamental understanding of molecular doping and offers insights for the development of high-conductivity, stable conducting polymers with tunable properties for next-generation electronics.</p>

<p>  </p> <p>Low-dimensional materials (LDMs) are substances that have at least one dimension with thicknesses in the nanometer (nm) scale. They have attracted tremendous research interests in many fields due to their unique properties that are absent in bulk materials. For instance, in quantum optics/photonics, LDMs offer unique advantages for effective light extraction and coupling with photonic/plasmonic structures; in chemistry, the large surface-to-volume ratio of LDMs enables more efficient chemical processes that are useful for numerous applications. In this thesis, several types of LDMs are studied and engineered with the goal to improve their impact in plasmonic and quantum photonic applications. Two-dimensional hexagonal boron nitride (hBN) is receiving increasing attention in quantum optics/photonics as it hosts various types of quantum emitters that are promising for quantum computing, quantum sensing, etc. In the first study, we explore and demonstrate a radiation- and lithography-free route to deterministically create single-photon emitters (SPEs) in hBN by nanoindentation with an atomic force microscopy. The method applies to hBN on flat, chip-compatible silicon-based substrates, and an SPE yield of up to 36% is achieved. This marks an important step toward the deterministic creation and integration of hBN SPEs with photonic and plasmonic devices. In the second study, the recently discovered negatively charged boron vacancy (V_B^-) spin defect in hBN is investigated. V_B^- defects are optically active with spin properties suitable for sensing at extreme scales. To resolve the low brightness issue of V_B^- defects, we couple them with an optimized nano-patch antenna structure and observe emission intensity enhancement that is nearly an order of magnitude higher than previous reports. Our achievements pave the way for the practical integration of V_B^- defects for quantum sensing. Zero-dimensional nanodiamond is another important host material for solid-state SPEs. Specifically, the negatively charged silicon vacancy (SiV) center in nanodiamonds exhibits optical properties that are suitable for quantum information technologies. In the third study, we, for the first time, demonstrate the creation of single SiV centers in nanodiamonds with an average size of ~20 nm using ion implantation. Stable single-photon emission is confirmed at room temperature, with zero-phonon line (ZPL) wavelengths in the range of 730 – 803 nm. This confirms the feasibility of single-photon emitter creation in nanodiamonds with ion implantation, and offers new opportunities to integrate diamond color centers for hybrid quantum photonic systems. Finally, we have also explored using metal-semiconductor hybrid nanoparticles for plasmon-enhanced photocatalysis. A core-shell nanoparticle structure is synthesized, with titanium nitride (TiN) and titanium dioxide (TiO₂) being the core and shell material respectively. It is observed that such core-shell nanoparticles effectively catalyze the generation of single oxygen molecules under 700-nm laser excitation. The main mechanism behind is the hot electron injection from the TiN core to the TiO₂ shell. Considering the chemical inertness and low cost of TiN, TiN@TiO₂ NPs hold great potential as plasmonic photosensitizers for photodynamic therapy and other photocatalytic applications at red-to-near-infrared (NIR) wavelengths.</p>

<p dir="ltr">The primary goal of this work is to gain a fundamental understanding on how growth conditions affect the morphology and crystallography orientation of CeO₂/Au vertically aligned nanocomposite (VAN) thin films. Focus has been placed on how the changes in morphology and crystallography translate to tunable optical properties. The morphological effects have been observed and analyzed via two main approaches: the change in morphology was observed at multiple points along the film thickness, and the morphology at the film/substrate interface has been analyzed with respect to total film thickness. The changes in Au crystallography orientations have been observed by measuring peak shift in XRD patterns and determining the resulting in- and out-of-plane strain. To observe additional effects of this morphology change, optical measurements have been taken for films at the bottom, middle, and top of the thickness range. Strong trends in transmittance, plasmonic absorption peak shifts and hyperbolic permittivity behavior are correlated with the film thickness. This tunability of optical properties likely arises from changes in both Au pillar phase morphology and crystal orientation. These findings demonstrate that changing film thickness may be a desirable method to easily tune the morphology and optical properties of VAN thin films.</p>

<p> In an era of advancing printed electronics, solution-processable organic semiconductors continue to make significant strides in electronic and optoelectronic applications. Electrochromic (EC) technology, which encompass reversible optical modulation under electrochemical biasing, has progressed rapidly over the past half-century and developed into niche commercial-scale devices for auto-tinting glasses as well as low-power, non-emissive displays. To utilize the advantages of organic electrochromic materials in next-generation devices, it is imperative to understand their fundamental material properties, interactions with other device components, and the underlying electrochemistry that governs the overall optical and electrochemical response of the complete electrochromic device. This dissertation presents a discussion on the synergistic role of organic electrochromes, charge-balancing layers and electrolytes in determining two key performance metrics, namely the optical contrast and operational stability, of an electrochromic device (ECD). The absorption features of colored-to-transmissive switching conjugated polymers have been investigated by exploring material design strategies in conjunction with analytical approaches to optimize and enhance the optical contrast. In parallel, transmissive redox-active radical polymer counter electrodes have been developed as compatible charge-balancing layers and integrated into devices by pairing with electrochromic polymers (ECPs) to achieve stable and high-contrast optical modulation. Electrochemical activity of both conjugated and radical polymer electrodes in different ionic and solvent environments have been further examined to understand material-electrolyte interactions governing mixed ionic-electronic conduction. Finally, a small molecular approach to realizing transparent-to-colored electrochromism is discussed, where distinct substituent-induced degradation pathways of conjugated radical cations were revealed. Overall, this research aims to assist future development of robust, ultra-high contrast organic electrochromic platforms.  </p>

<p dir="ltr">Photovoltaics are leading devices in green energy production. Understanding the fundamental physics behind energy transport in candidate materials for future photovoltaic and optoelectronic devices is necessary to both realize material limitations and improve efficiency. Excitons, which are bound electron-hole pairs, are central to determining how energy propagates throughout semiconductors. Exciton transport is greatly influenced by material dimensionality. In highly ordered quantum dot (QD) systems, electronic coupling between individual QDs can lead to coherent exciton transport, whereas in two-dimensional heterostructures, excitons can form at the interface of a heterojunction, creating charge-transfer excitons.</p><p dir="ltr">This dissertation is dedicated to summarizing the studies of exciton transport and behavior in two systems: perovskite QD superlattices and transition metal dichalcogenide (TMDC)/polyacene heterostructures. Chapter 1 provides readers with details on these materials in addition to information on the fundamental concepts (i.e., excitons, phonons, energy transfer) needed to best appreciate further chapters. Chapter 2 summarizes the spectroscopic techniques (photoluminescence and transient absorption spectroscopy and microscopy) used to examine exciton behavior. Next, the effects of disorder and dephasing pathways on the ability of perovskite QDs to coherently couple is investigated through the lens of superradiance in Chapter 3. After this, the temperature-dependent exciton transport within perovskite QD superlattices is imaged with high spatial and temporal resolutions in Chapter 4. The experimental transport data on these superlattices provides evidence for environment-assisted quantum transport, which, until this study, had yet to be realized in solid-state systems. In Chapter 5, attention is switched to verifying the existence and deepening the understanding of the behavior of several spatially separated interlayer excitons in a tungsten disulfide/tetracene heterostructure. Finally, Chapter 6 summarizes the preliminary results obtained through transient absorption spectroscopy on other TMDC/polyacene heterostructures where separation of the triplet pair state is attempted. </p><p dir="ltr">It is this author’s hope that this dissertation will not only summarize their graduate work but will also serve as inspiration for others to continue learning and contribute to the advancement of the energy research field.</p>

<p dir="ltr">Metamaterials are artificially engineered nanoscale systems with a three-dimensional repetitive arrangement of certain components, and present exceptional optical properties for applications in nanophotonics, solar cells, plasmonic devices, and more. Self-assembled oxide-metal vertically aligned nanocomposites (VANs), with metallic phase as nanopillars embedded in the matrix oxide, have been recently proposed as a promising candidate for metamaterial applications. However, precise microstructural control and the structure-property relationships in VANs are still in high demand. Thus, by employing multiple approaches for structural design, this dissertation attempts to investigate the mechanisms of nanostructure evolutions and the corresponding optical responses.</p><p dir="ltr">In this dissertation, the precise control over the nanostructures has been demonstrated through morphology tuning, nanopillar orderings, and strain engineering. Firstly, Au, a well-known plasmonic mediator, has been selected as the metallic phase that forms nanopillars. Based on the previously proposed strain compensation model which describes the basic formation mechanism of VAN morphology, two oxides were then considered: La_0.7Sr_0.3MnO₃(LSMO) and CeO₂. In the first two chapters of this dissertation, LSMO was considered due to its similar lattice (a_LSMO= 3.87 Å, a_Au= 4.08 Å) and its enormous potential in nanoelectronics and spintronics. Deposited on SrTiO₃ (001) substrate through pulsed laser deposition (PLD), LSMO-Au nanocomposites exhibit ideal VAN morphology as well as promising hyperbolic dispersions in response to the incident illuminations. By substrate surface treatment of annealing at 1000°C, and variation of STO substate orientations from (001), to (111) and (110), the improved and tunable in-plan orderings of Au nanopillars have been successfully achieved. In the third chapter, a new oxide-metal VAN system of <a href="" target="_blank">CeO₂</a>-Au (a_CeO2= 5.411 Å, and a_CeO2/= 3.83 Å) has been deposited. The intriguing 45° rotated in-plan epitaxy presents an unexpected update to the strain compensation model, and tuning of Au morphology from nanopillars, nanoantennas, to nanoparticles also shows an effective modulation of the LSPR responses. COMSOL simulations have been exploited to reveal the relationships between Au morphologies and optical responses. In the last chapter, the two VAN systems of LSMO-Au and CeO₂-Au have been combined to form a complex layered VAN thin film. Investigations into the strain states, the nature of complex interfaces, and the according hybrid properties, show dramatic possibilities for further strain engineering. In summary, this dissertation has provided multiple routes for highly tailorable oxide-metal nanocomposite designs. And the two proposed material systems present great potential in optical metamaterial applications including biosensors, photovoltaics, super lenses, and more.</p>

<p dir="ltr">Transitioning to a carbon-neutral future will require a broad portfolio of green energy generation and storage solutions. With the abundant availability of solar radiation across the Earth’s surface, energy generation from photovoltaics (PVs) will be an important part of this green energy portfolio. While silicon-based solar cells currently dominate the PV market, temperatures exceeding 1000 °C are needed for purification of silicon, and batch processing of silicon wafers limits how rapidly Si-based PV can be deployed. Furthermore, silicon’s indirect band gap necessitates absorber layers to exceed 100 µm thick, limiting its applications to rigid substrates.</p><p dir="ltr">Solution processed thin-film solar cells may allow for the realization of continuous, high-throughput manufacturing of PV modules. Thin-film absorber materials have direct band gaps, allowing them to absorb light more efficiently, and thus, they can be as thin as a few hundred nanometers and can be deposited on flexible substrates. Solution deposition of these absorber materials utilizing molecular precursor-based inks could be done in a roll-to-roll format, drastically increasing the throughput of PV manufacturing, and reducing installation costs. In this dissertation, solution processed synthesis and the characterization of two emerging direct band gap absorber materials consisting of earth abundant elements is discussed: the enargite phase of Cu₃AsS₄ and the distorted perovskite phase of BaZrS₃.</p><p dir="ltr">The enargite phase of Cu₃AsS₄ (ENG) is an emerging PV material with a 1.42 eV band gap, making it an ideal single-junction absorber material for photovoltaic applications. Unfortunately, ENG-based PV devices have historically been shown to have low power conversion efficiencies, potentially due to defects in the material. A combined computational and experimental study was completed where DFT-based calculations from collaborators were used inform synthesis strategies to improve the defect properties of ENG utilizing new synthesis techniques, including silver alloying, to reduce the density of harmful defects.</p><p dir="ltr">Chalcogenide perovskites are viewed as a stable alternative to halide perovskites, with BaZrS₃ being the most widely studied. With a band gap of 1.8 eV, BaZrS₃ could be an excellent wide-bandgap partner for a silicon-based tandem solar cell.Historically, sputtering, and solid-state approaches have been used to synthesize chalcogenide perovskites, but these methods require synthesis temperatures exceeding 800 °C, making them incompatible with the glass substrates and rear-contact layers required to create a PV device. In this dissertation, these high synthesis temperatures are bypassed through the development of a solution-processed deposition technique.A unique chemistry was developed to create fully soluble molecular precursor inks consisting of alkaline earth metal dithiocarboxylates and transition metal dithiocarbamates for direct-to-substrate synthesis of BaZrS₃ and BaHfS₃ at temperatures below 600 °C.</p><p dir="ltr">However, many challenges must be overcome before chalcogenide perovskites can be used for the creation of photovoltaic devices including oxide and Ruddlesden-Popper secondary phases, isolated grain growth, and deep level defects. Nevertheless, the development of a moderate temperature solution-based synthesis route makes chalcogenide perovskite research accessible to labs which do not have high temperature furnaces or sputtering equipment, further increasing research interest in this quickly developing absorber material.</p>

<p dir="ltr">Thermal Barrier Coatings (TBC) represent the key technology enabling greater efficiency and performance in jet engines and gas turbines. In modern engines, TBCs allow gas temperatures to exceed 1700°C, well above the point at which the structural alloys lose their strength. By insulating the underlying nickel-alloy components from the extreme heat generated during combustion, TBCs support a larger temperature gradient. </p><p dir="ltr">As operating temperatures are further increased to improve performance, thermal radiation becomes a more substantial carrier of heat. However, conventional TBCs are designed to provide a single barrier against only the phonon-mediated conductive heat flux, leaving the photonic radiative heat transfer largely unmitigated. We propose a Thermal Dual Barrier Coating (TDBC) to simultaneously suppress the phononic and photonic heat transfer by integrating a reflective thermal metamaterial into an independent phonon-optimized TBC.</p><p dir="ltr">The main obstacle to achieving the TDBC is in the selection of adequate reflective materials in the metamaterial. Conventional refractory metals that demonstrate the greatest stability and functionality in thermal metamaterials show instability under harsher environments. In our work, we identified and studied the key ideas, metrics, and challenges in metamaterials based on alternating layers of refractory metals and oxides for TDBC applications.</p><p dir="ltr">Our work emphasizes oxidation as a crucial degradation factor that is unavoidable in our assessment of the metamaterials. In formulating this problem, we bring the concept of oxidation-resistance through passivation to the forefront of material selection. We emphasize the passivative and oxidative properties of the metallic layer as a critical determinant in overall stability. In our work, we assess the enhancements in stability brought via passivation through the Pilling-Bedworth Ratio. We then propose the use of metal silicides in metamaterials as an overlooked class of oxidation-resistant IR reflective materials that operate through a more complex passivation method. We demonstrate strong stability in the structural integrity as well as the infrared responses of the metamaterials at up to 1200°C in atmospheric and oxidative environments.</p><p dir="ltr">After establishing the viability of metal silicides in wide-area thin films, we explore their viability in more complex thermal structures. We fabricate metal silicide metasurfaces for directional thermal emission. We demonstrate a grating structure that exhibits enhanced structural stability and maintains directional modes in the mid-IR after annealing at 1000°C.</p>

<p>This dissertation describes how the surface chemistries of 2D nanomaterials can be modified to alter overall material properties. Specifically, through a focus of the ligand-surface atom bonding in addition to the overall ligand structure we highlight the ability to direct morphological outcomes in lead free halide perovskites, maximize optoelectronic responses in substoichiometric tungsten oxide, and alter physicochemical properties titanium carbide MXenes.   </p>

The development of solution-processable semiconducting polymers has brought mankind’s long-sought dream of plastic electronics to fruition. Their potential in the manufacturing of lightweight, flexible yet robust, and biocompatible electronics has spurred their use in organic transistors, photovoltaics, electrochromic devices, batteries, and sensors for wearable electronics. Yet, despite the successful engineering of semiconducting polymers, we do not fully understand their molecular behavior and how it influences their doping (oxidation/reduction) properties. This is especially true for donor-acceptor (D-A) p-systems which have proven to be very efficient at tuning the electronic properties of organic semiconductors. Historically, chain-length dependent studies have been essential in uncovering the relationship between the molecular structure and polymer properties. Discussed here is the systematic investigation of a complete D-A molecular series composed of monodispersed and well-defined conjugated molecules ranging from oligomer (n=3-21) to polymer scale lengths. Structure-property relationships are established between the molecular structure, chain conformation, and redox-active opto-electronic properties for the molecular series in solution. This research reveals a rod-to-coil transition at the 15 unit chain length, or 4500 Da, in solution. The redox-active optical and electronic properties are investigated as a function of increasing chain-length, giving insight into the nature of charge carriers in a D-A conjugated system. This research aids in understanding the solution behavior of conjugated organic materials. <br>