Aim of this thesis is modular design of control system for Golem device, which is used for drug research. Several modules with specified controlled area were designed. They communicate using CAN bus and are controlled by Raspberry Pi computer. The thesis includes PCB design and control firmware for modules, backend application for Raspberry Pi, which provides application interface, and simple protocol used for communication between modules. Designed system was tested in simulated environment.

This master’s thesis deals with the design and realization of a functional sample power inverter for an electric compressor, which is used in hybrid cars. The electric compressor powered by the inverter is E-compressor by Garrett Advancing Motion. An inverter will be using modern High Electron Mobility Transistors which are based on gallium nitride (GaN). The purpose of this thesis is to find if GaN transistors can be used in E-boosting application.

This work deals with issues of the wetting forces during soldering and evaluates material and procedural effects on the soldering process. The aim is to set the technology operations to get best quality of soldered joints.

This diploma thesis deals with issues of inventory management and logistics controlling. These segments are one of most important instruments used in logistics. Theory of these logistic instrumens are used as a base for practical part of this diploma thesis, where is described and suggested methodology for inventory management of printed circuit board in repair center. This buffer inventory serves for securing performance of customer’s supplies in case of failure on repair line. Thereinafter is realized program in MS Excel interface for supplying leadership with main insistence to prevent order delay.

This thesis deals with the design of the 3,5" floppy drive emulator with ATMEGA microprocessor unit. The emulator has been designed according to the principles of designing electronic devices, there is also object-control application and firmware for a microcontroller, which supports MFM coding. The thesis also lists all the formats of data stored or transmitted along with some flowcharts.

This diploma thesis describe the desing and assembly of switching power supply with an output of 2,5kW. At first is described the funcional principle of SPMS. The next is the proceed design of power part of the converter composed from calculation of transformer, inductors, capacitors and sizing of semiconductors. There is proceed the calculation of power looses. The next step is to make acquaintance with the possibilities of feedback control, creating a model system for simulating and executing the selection of an appropriate regulatorystructure.The following is the calculation of regulators suitable method and simulation at program MatlabSimulink. Is procced the computing and realization of regulators and finding the PWM modulator. At over is constution of contorl logic and desin of printed circuit desing, assembly and their recovery.

The thesis is focused on optimizing of operational management to maximize efficiency of production capacity in Production plant Brno. This is an analysis of the current state which poiting on inprovable weak spots. They are mounting machines and company information systém. Results of this thesis are concepts which should leads in more effective operational management.

La présente thèse étudie les rapports entre les activités diplomatiques et la publication de livres, périodiques et pamphlets au milieu du XVIIe siècle, dans le contexte des premiers développements de la diplomatie de Restauration portugaise en France. Il s’agit d’examiner en détail les objectifs, le champ d’action et les initiatives des représentants du nouveau monarque intervenant dans la circulation de l’information politique et dans le monde des livres et des imprimeries, avec une attention exclusive portée à la conjoncture de la première mission envoyée à Paris en 1641, et à quelques aspects de l’action des ambassades suivantes, jusqu’au retour à Lisbonne de la délégation du marquis de Niza en 1649.Il sera possible d’abord de discerner une série de circonstances et de publications antérieures à l’arrivée des envoyés portugais, et puis d’observer les fréquentations et contacts qu’ils établissent en France, ainsi que toute sorte d’occupations quotidiennes liées à la diffusion d’informations, à l’écriture et à la circulation de pièces manuscrites et imprimées. Cette échelle temporelle plus fine permettra en outre d’enquêter sur des pratiques littéraires, rhétoriques et informationnelles qui composaient le paysage éditorial qu’ont trouvé en France les agents de Jean IV. Toutes ces recherches contribuent à une lecture minutieuse des éléments discursifs et matériels présents dans les publications que l’ambassade portugaise produit, ou qu’elle espérait fomenter, afin de reconstituer au plus proche les intentions de leurs rédacteurs et éditeurs, voire les réflexions et réactions plus immédiates que ces publications pouvaient susciter chez les lecteurs et dans une partie substantielle de la société française. / This thesis studies the relationships between diplomatic activities and the publication of books, journals, and pamphlets in the mid-17th century in the context of the initial development of Portuguese Restauration diplomacy in France. It is about examining in detail the goals, field of action, and initiatives of the new monarch’s representatives who intervene in the circulation of political information and in the world of books and typography workshops, giving exclusive attention to the circumstance of the first mission sent to Paris in 1641 and to some aspects of actions of the following embassies, until the return to Lisbon of the Marquis of Niza’s delegation in 1649.It will be possible, firstly, to distinguish a series of circumstances and publications prior to the arrival of the Portuguese envoys and then observe visits and contacts that they establish in France, as well as all kind of daily occupations linked to the diffusion of information, writing, and the circulation of hand-written and printed pieces. This narrower time scale will allow, in addition, investigations on the literary, rhetorical, and informational practices that were part of the editorial landscape found in France by John IV’s agents. All these studies contribute to a meticulous reading of discursive and material elements present in the publications that the embassy produced, or had hoped to incentivize, with the goal of reconstituting as much as possible the intentions of its writers and editors, or even the most immediate reflections and reactions that these publications could arouse in readers and in a substantial part of French society.

L’électronique souple utilisée dans les technologies RFID et NFC est aujourd’hui en plein essor et la demande croît exponentiellement chaque année. De nombreuses applications sont possibles comme les antennes RFID et les conducteurs transparents. Pour répondre à cette demande, il est nécessaire de proposer une technologie de fabrication à bas coût. Aujourd’hui les antennes sont fabriquées en R2R (Roll to Roll) par des méthodes soustractives à des coûts trop élevé et générant des déchets. Les méthodes d’impressions, qui sont additives, permettent aujourd’hui de réaliser des objets à la demande. L’objectif de cette thèse est de développer une technologie de rupture par rapport à l'existant. Les développements actuels se faisant majoritairement sur des nanoparticules d’argent, la stratégie de la thèse a été de développer un primaire métallisable (encre catalytique) pour la métallisation par voie chimique (electroless Cuivre). Dans cette étude nous avons abordés les différentes étapes qui ont permis de sélectionner le polymère adéquat pour la métallisation par voie chimique, à basse température, d'optimiser son greffage ainsi que son incorporation dans une formulation complète d’encre catalytique. Différentes preuves de concepts ont été obtenues grâce à la technologie développée par voie jet d’encre. La métallisation electroless permet d’obtenir une résistivité de 1.8 µΩ.cm et une excellente adhésion sur des substrats souples peu onéreux de faible point de transition vitreuse comme le PET et le PVC. La température du procédé de métallisation n’excède pas 50 °C. / The flexible electronics used in RFID and RFID and NFC technologies is now a booming market and demand is growing exponentially each year. Many applications are possible, such as RFID antennas and transparent conductors. To meet this demand, it is necessary to offer a low-cost manufacturing technology. Today antennas are manufactured in R2R (Roll to Roll) by subtractive methods and at high cost and generating waste. The methods of printing, which are additive, allow today to realize objects on demand. The aim of this thesis is to develop a breakthrough technology compared to the existing one. The current developments are predominantly done thanks to silver nanoparticles, the strategy of thethesis was to develop a metallizable primer (catalytic ink) for metallization by chemical means (electroless copper). In this study we will see the different steps that allowed us to select the appropriate polymer for chemical metallization, at low temperature and optimize its grafting as well as its incorporation in a complete formulation of catalytic ink. Different proofs of concepts have been obtained thanks to the technology developed by inkjet. The metallization electroless makes it possible to obtain a resistivity of 1.8 μΩ.cm and a very good adhesion on the inexpensive flexible substrates and weak point of glass transition polymer such as PET and PVC. The temperature of the metallization process does not exceed 50 °C.

This study aims to investigate how the choice of media form, i.e. printed format, audiobook or reading and audio combined, affect the ability of ESL students to achieve comprehension, and how different ways of asking questions can affect their comprehension ability. Lastly, the study aims to investigate the relationship between comprehension and students’ proficiency levels in their L2. To answer this question, 155 students were recruited and divided into three groups and assigned one type of media form. The quantitative data was collected through an online comprehension test and analysed. The results showed a significant difference between the media forms and revealed that printed reading was superior. However, a printed and audio combination was the most time efficient way for students to achieve comprehension, which indicates that the inclusion of audio does not impede student learning. Previous research in the same field shows that the results are inconclusive, but shares one common conclusion, that students enjoy the audio format. As a result, the educational system should make every effort to media choices for students to choose their preferred media, and more research in the field needs to be done, as students enjoyment leads to increased learning.