Psychometric testing is becoming more influential in the recruitment and development of individuals within the corporate environment globally, with over 80% of Fortune 500 companies in the USA and over 75% of the Times Top 100 companies in the UK using psychometric testing, the same trend is emerging in South Africa. The aim of this study was to investigate the possible relationship between an individual’s preferred behavioural approach on various behavioural dimensions and the manner in which they complete a psychometric measure, more specifically, a learning potential measure within the corporate environment, as an individual’s preferred behavioural approach may act as a biasing factor with regard to the result that they obtain. A causal research design was utilised and two psychometric measures used to respectively determine an individual’s preferred behavioural style and learning potential. The sample consisted of 398 economically active adult candidates in either a development or recruitment assessment centre. Both the Personal Profile Analysis (PPA) and Test for Selection and Training (TST) were administered on these 398 individuals. Statistical analysis was carried out on the test results with the use of SPSS and Microsoft Excel. The reliability and validity of the measuring instruments was also ascertained and found acceptable. Descriptive statistics, contingency tables, significant differences, t-test statistics and p-values were used to analyse the data. These statistical methods were used to indicate if a relationship exists. The results indicate that various behavioural dimensions, (Dominance, Influence and Steadiness) amongst individuals within the South African Corporate environment do have an impact on how they complete a learning potential measure, when consideration is given to the speed and accuracy with which they complete such a measure. Recommendations for the organisation and future research were made. / Psychology / M.A. (Research Psychology)

Baseado em dois momentos distintos da realidade brasileira, os anos de 2002/03 e 2008/09, este estudo busca avaliar se houve mudança no perfil dos consumidore de filmes em salas de cinema, por meio de variáveis observáveis de indivíduos consumidores e não consumidores. Para esta finalidade são empregadas técnicas de mineração de dados de florestas aleatórias sobre os microdados das Pesquisas de Orçamentos Familiares (POFs) de 2002/2003, quando o uso de banda larga no Brasil era praticamente nulo, e de 2008/2009, quando esta já estava estabelecida no país. Esta diferença no tempo e de acesso à banda larga proporcionam uma janela de oportunidade para nosso objetivo, dado o elevado grau de mudanças tecnológicas do período investigado. Apesar de metodologicamente não ser possível isolar completamente o efeito do acesso à Internet sobre o consumo de cinema, espera-se que quanto maior a velocidade de acesso e maior a evolução das tecnologias de compactação de arquivos, a distribuição de conteúdo aumente na rede e permita maior consumo de filmes de maneira alternativa ao em salas de cinema. Neste contexto, além de identificar se houve alguma mudança de perfil dos consumidores de filmes em salas de cinema no Brasil após a popularização da banda larga no país, que oficialmente pode ser considerada no ano de 2006, também avaliamos se estes consumidores diferem significativamente dos não consumidores em suas características observáveis. Adicionalmente, num segundo estudo, usando um modelo de intervenção de Diferenças em Diferenças, investigamos o efeito da banda larga sobre o consumo de cinema. Os resultados apontam divergência clara entre os perfis de consumidores e não consumidores de filmes de cinema. / I investigate whether film at theaters consumers in two distinct time are different in their observable characteristics. My investigation is based on observable variables of consumers and non-consumers data from the Family Budget Survey (POF) of 2002/2003, when the use of broadband in Brazil was almost nil, and from 2008/2009, when it already was established in the country. This change in addition to the high degree of technological changes over the period provides a window of opportunity for our objective. Although methodologically it is not possible to full isolate the effect of Internet access on film consumption, it is expected that the higher the user access speed and the greater the evolution of file compression technologies, the faster and bigger will be the traffic of films files on the web. Accordingly, the greater distribution of content on the network enables the consumption of films in alternative ways to movie theaters. Thus, in addition to identifying possible changes in the profile of movie consumers at the theaters in Brazil since the popularization of broadband in the country, which can officially be considered in the year 2006, the study assess whether these consumers differ significantly from not consumers in their observable characteristics. The results points to several distinctions between cinema consumers and no cinema consumers

O objetivo deste trabalho foi desenvolver e implementar uma metodologia envolvendo a análise de perfis de difração de raios X (X-ray Line Profile Analysis - XLPA) para o estudo e determinação do tamanho médio de cristalitos e microdeformação em materiais. Para isto houve o desenvolvimento de um programa computacional para facilitar o tratamento dos picos presentes em um difratograma e realizar a deconvolução de perfis através do Método de Stokes para se corrigir a contribuição instrumental nos perfis de difração. Os métodos de XLPA de espaço real estudados e aplicados neste trabalho foram os métodos de Scherrer, Williamson-Hall e Single-Line (ou Linha Única) e o método de Warren-Averbach de espaço de Fourier. Além disso, utilizando-se um modelamento matemático foi possível calcular a distribuição de tamanhos de cristalitos para um caso isotrópico, onde considerou-se a distribuição log-normal e cristalitos com forma esférica. Foi possível demonstrar que a teoria proposta pode ser considerada como uma boa aproximação avaliando-se uma razão de dispersão. As metodologias descritas acima foram aplicadas em dois materiais distintos: na liga metálica Zircaloy-4 e em ZnO. / The objective of this work was to develop and implement a methodology of X-ray Line Profile Analysis (XLPA) for the study and determination of the mean crystallite sizes and microstrains in materials. A computer program was developed to speed up the treatment of diffraction peaks and perform the deconvolution utilizing the Stokes method to correct the instrumental contribution in the X-ray diffraction measurements. The XLPA methods used were the Scherrer, Williamson-Hall and Single-Line methods, which can be called real space methods, and the Fourier space method of Warren-Averbach. Furthermore, considering a mathematical modelling it was possible to calculate the crystallite size distribution, considering the log-normal distribution and spherical crystallites. It was possible to demonstrate the proposed theory can provide reliable results evaluating a dispersion parameter. The methodologies described above were applied in two distinct materials: in the alloy Zircaloy-4 and in ZnO.

O objetivo deste trabalho foi desenvolver e implementar uma metodologia envolvendo a análise de perfis de difração de raios X (X-ray Line Profile Analysis - XLPA) para o estudo e determinação do tamanho médio de cristalitos e microdeformação em materiais. Para isto houve o desenvolvimento de um programa computacional para facilitar o tratamento dos picos presentes em um difratograma e realizar a deconvolução de perfis através do Método de Stokes para se corrigir a contribuição instrumental nos perfis de difração. Os métodos de XLPA de espaço real estudados e aplicados neste trabalho foram os métodos de Scherrer, Williamson-Hall e Single-Line (ou Linha Única) e o método de Warren-Averbach de espaço de Fourier. Além disso, utilizando-se um modelamento matemático foi possível calcular a distribuição de tamanhos de cristalitos para um caso isotrópico, onde considerou-se a distribuição log-normal e cristalitos com forma esférica. Foi possível demonstrar que a teoria proposta pode ser considerada como uma boa aproximação avaliando-se uma razão de dispersão. As metodologias descritas acima foram aplicadas em dois materiais distintos: na liga metálica Zircaloy-4 e em ZnO. / The objective of this work was to develop and implement a methodology of X-ray Line Profile Analysis (XLPA) for the study and determination of the mean crystallite sizes and microstrains in materials. A computer program was developed to speed up the treatment of diffraction peaks and perform the deconvolution utilizing the Stokes method to correct the instrumental contribution in the X-ray diffraction measurements. The XLPA methods used were the Scherrer, Williamson-Hall and Single-Line methods, which can be called real space methods, and the Fourier space method of Warren-Averbach. Furthermore, considering a mathematical modelling it was possible to calculate the crystallite size distribution, considering the log-normal distribution and spherical crystallites. It was possible to demonstrate the proposed theory can provide reliable results evaluating a dispersion parameter. The methodologies described above were applied in two distinct materials: in the alloy Zircaloy-4 and in ZnO.

Baseado em dois momentos distintos da realidade brasileira, os anos de 2002/03 e 2008/09, este estudo busca avaliar se houve mudança no perfil dos consumidore de filmes em salas de cinema, por meio de variáveis observáveis de indivíduos consumidores e não consumidores. Para esta finalidade são empregadas técnicas de mineração de dados de florestas aleatórias sobre os microdados das Pesquisas de Orçamentos Familiares (POFs) de 2002/2003, quando o uso de banda larga no Brasil era praticamente nulo, e de 2008/2009, quando esta já estava estabelecida no país. Esta diferença no tempo e de acesso à banda larga proporcionam uma janela de oportunidade para nosso objetivo, dado o elevado grau de mudanças tecnológicas do período investigado. Apesar de metodologicamente não ser possível isolar completamente o efeito do acesso à Internet sobre o consumo de cinema, espera-se que quanto maior a velocidade de acesso e maior a evolução das tecnologias de compactação de arquivos, a distribuição de conteúdo aumente na rede e permita maior consumo de filmes de maneira alternativa ao em salas de cinema. Neste contexto, além de identificar se houve alguma mudança de perfil dos consumidores de filmes em salas de cinema no Brasil após a popularização da banda larga no país, que oficialmente pode ser considerada no ano de 2006, também avaliamos se estes consumidores diferem significativamente dos não consumidores em suas características observáveis. Adicionalmente, num segundo estudo, usando um modelo de intervenção de Diferenças em Diferenças, investigamos o efeito da banda larga sobre o consumo de cinema. Os resultados apontam divergência clara entre os perfis de consumidores e não consumidores de filmes de cinema. / I investigate whether film at theaters consumers in two distinct time are different in their observable characteristics. My investigation is based on observable variables of consumers and non-consumers data from the Family Budget Survey (POF) of 2002/2003, when the use of broadband in Brazil was almost nil, and from 2008/2009, when it already was established in the country. This change in addition to the high degree of technological changes over the period provides a window of opportunity for our objective. Although methodologically it is not possible to full isolate the effect of Internet access on film consumption, it is expected that the higher the user access speed and the greater the evolution of file compression technologies, the faster and bigger will be the traffic of films files on the web. Accordingly, the greater distribution of content on the network enables the consumption of films in alternative ways to movie theaters. Thus, in addition to identifying possible changes in the profile of movie consumers at the theaters in Brazil since the popularization of broadband in the country, which can officially be considered in the year 2006, the study assess whether these consumers differ significantly from not consumers in their observable characteristics. The results points to several distinctions between cinema consumers and no cinema consumers

ABSTRACT This thesis conducts profile analysis on the mobile application security using peer-review articles that were published from 2010 to 2018. From the analysis, we will identify prolific authors, intuitions, and geographic regions as well as the topics addressed by the articles. The profile analysis will reveal most frequently used research methods, research approaches (quantitative, qualitative and mixed), and theories used to study the field. This thesis reveals that none of the researchers have made significant contributions to the field, and researches are not collaborating to solve their research problems. The profile analysis shows that surveys and experiments are the most utilized research methods, and most researchers studied the field at a higher level, i.e., security was the focus of the research but did not go deeper into various aspects of security such as privacy, security vulnerabilities, and mobile application security best practices.

Comme les gens vieillissent, ils sont souvent confrontés à un certain degré de diminution des capacités cognitives ou de la force physique. Isolement de la vie sociale, mauvaise qualité de la vie, et risque accru de blessures en sont les principales conséquences. Ambient Assisted Living (AAL) est une vision de la façon dont les gens vivent leur vie dans leur propre maison, à mesure qu'ils vieillissent : handicaps ou limitations sont compensées par la technologie, là où le personnel de prestation de soins est rare ou des proches ne sont pas en mesure d'aider. Les personnes concernées sont assistés par la technologie. Le terme "ambiante" en AAL exprime, ce que cette technologie doit être, au- delà de l’assistance. Elle doit être intégrée dans l’environnement de manière à ce qu'elle ne soit pas reconnue en tant que tel. L'interaction avec les résidents doit être intuitive et naturelle. L'équipement technique doit être discret ct bien intégré. Les domaines d'application ciblés dans cette thèse sont le suivi de l’activité et la recherche de profils d'activités dans des appartements ou des petites maisons. L'acquisition d’informations concernant l’activité des résidents est vitale pour le succès de toute la technologie d’assistance. Dans de nombreux domaines de la vie quotidienne, ceci est déjà de la routine. L’état de l’art en matière de technologie de détection comprend des caméras, des barrières lumineuses, des capteurs RFID, la radiolocalisation de signal en utilisant des transpondeurs et des planchers sensibles à la pression. En raison de leurs principes de fonctionnement, ils ont malheureusement un impact important sur les environnements domestiques et de vie. Par conséquent, cette thèse est consacrée à la recherche de technologies d’acquisition d’informations de l’activité non-intrusive ayant un impact minimal sur la vie quotidienne. Deux technologies de base, la détection de présence passive sans dispositif et le suivi de charges de manière non-intrusive, sont prises en compte dans cette thèse. / As people grow older, they are often faced with some degree of decreasing cognitive abilities or physical strength. Isolation from social life, poor quality of life, and increased risk or injuries are the consequence. Ambient Assisted Living (AAL) is a vision for the way people live their life in their own home, as they grow older: disabilities or limitations are compensated for by technology, where care-giving personnel is scarce or relatives are unable to help. Affected people are assisted by technology. The term "Ambient" in AAL expresses, what this technology needs to be, beyond assistive. It needs to integrate into the living environment in such a way that it is not recognized as such any more. Interaction with residents needs to be intuitive and natural. Technical equipment should be unobtrusive and well integrated. The areas of application targeted in this thesis are activity monitoring and activity pattern discovery in apartments or small houses. The acquisition of information regarding the residents' activity is vital for the success of any assistive technology. In many areas of daily life, this is routine already. State-of-the-art sensing technology includes cameras, light barriers, RFID sensors, radio signal localization using transponders, and pressure sensitive Floors. Due to their operating principles, they have a big impact on home and living environments. Therefore, this thesis is dedicated to research for non-intrusive activity information acquisition technology, that has minimal impact on daily life. Two base technologies are taken into account in this thesis.

Made available in DSpace on 2014-06-11T19:24:46Z (GMT). No. of bitstreams: 0 Previous issue date: 2010-03-12Bitstream added on 2014-06-13T18:52:40Z : No. of bitstreams: 1 montezuma_r_me_rcla.pdf: 2261471 bytes, checksum: e8de3c70b94bdde4b8cd09e24247eaf2 (MD5) / O objetivo desta pesquisa foi determinar o Perfil de Textura (TPA) em formulações comerciais de “carne bovina em conserva” (corned beef) enlatada processada termicamente e avaliar sua relação com os valores de esterilização (F0), com a Concentração da Proteína do Tecido Conjuntivo Colagenoso (CCTP) e com a Concentração da Proteína do Tecido Muscular (MTP). Foram selecionados 14 lotes de produção de corned beef em latas tronco trapezoidais de 340 g correspondentes ao padrão continental Campden A e destes foram retiradas 24 latas do produto dos sub lotes submetidos ao processamento térmico. Destas latas foram retiradas seis amostras aleatórias para determinação do TPA e para análise da composição visando determinação da Proteína do Tecido Conjuntivo Colagenoso (CCTP), da Proteína do Tecido Muscular (MTP) e do Conteúdo Carne Magra (LMC). As latas de corned beef analisadas foram submetidas a tratamentos térmicos de 75,0 a 76,7 minutos, com a temperatura da autoclave a 121o C e resfriamento a 35o C durante 60 minutos, obtendo-se valores de F0 no centro de massa do produto variando de 14,8 a 20 minutos. Os parâmetros de TPA dureza, fraturabilidade, coesividade, elasticidade, adesividade, mastigabilidade, gomosidade e resiliência foram determinados no bloco integral do produto bloco resfriado a 4ºC em oito pontos na superfície. Os mesmos blocos do produto utilizados para determinação do TPA foram analisados quanto à composição média, apresentando concentração de 0,4 a 2,5% para CCTP, de 21,7 a 25,3% para MTP e de 102,79 a 107,95% para LMC. Os tratamentos de corned beef avaliados apresentaram diferenças significativas pelo teste de Tukey nas médias dos parâmetros dureza, gomosidade, mastigabilidade, adesividade e elasticidade. Os três primeiros parâmetros apresentaram correlações significativas fortemente negativas com o valor... / The objectives of this research were the determination of the texture profile of canned corned beef thermally processed and to evaluate its relationship with the sterilization value (F0) and the composition. Fourteen production batches of Campden A grade 340-g corned beef cans were selected, from which twenty-four cans of the thermal process sub-batches were retrieved. From the sub-batches, six random sample cans were taken and its content submitted to the Texture Profile Analysis (TPA) and to the composition analysis to determine the concentration of the Collagenous Connective Tissue Protein (CCTP), the Muscular Tissue Protein (MTP) concentration and the Lean Meat Content (LMC). The corned beef samples analyzed were submitted to thermal treatments at 121o C (retort steam temperature) for varying heating times, from 75 to 76 minutes and cooled at 35o C (retort water temperature) during 35 minutes, to obtain F0 values at the product center point varying from 14.8 to 20 minutes. The TPA parameters were determined in 8 points of the whole corned beef loaf of each sample, previously chilled and stabilized at 4o C temperature, to obtain hardness, fracturability, cohesiveness, elasticity, adhesiveness, springiness, gumminess, chewiness and resilience. The same sample material were then analyzed in terms of average composition of the product, resulting in concentrations in the range of 0.4 to 2.5% for CCTP, 21.7 to 25.3% for MTP and content from 102.8% to 108.0% for LMC. The treated corned beef samples analyzed showed significant differences in the means for hardness, adhesiveness, chewiness and elasticity. These parameters showed dependence with the sterilization value (F0), revealing negative strong significant correlation for F0 with hardness, gumminess and chewiness. The MTP and LMC values showed a high positive significant correlation with cohesiveness. It was observed a high... (Complete abstract click electronic access below)

Made available in DSpace on 2014-12-17T14:08:51Z (GMT). No. of bitstreams: 1 DeboraCMP_DISSERT_Pre-textuais.pdf: 440461 bytes, checksum: de18053fd5097e8172e698a19f80a5e7 (MD5) Previous issue date: 2012-03-30 / Produced water is characterized as one of the most common wastes generated during exploration and production of oil. This work aims to develop methodologies based on comparative statistical processes of hydrogeochemical analysis of production zones in order to minimize types of high-cost interventions to perform identification test fluids - TIF. For the study, 27 samples were collected from five different production zones were measured a total of 50 chemical species. After the chemical analysis was applied the statistical data, using the R Statistical Software, version 2.11.1. Statistical analysis was performed in three steps. In the first stage, the objective was to investigate the behavior of chemical species under study in each area of production through the descriptive graphical analysis. The second step was to identify a function that classify production zones from each sample, using discriminant analysis. In the training stage, the rate of correct classification function of discriminant analysis was 85.19%. The next stage of processing of the data used for Principal Component Analysis, by reducing the number of variables obtained from the linear combination of chemical species, try to improve the discriminant function obtained in the second stage and increase the discrimination power of the data, but the result was not satisfactory. In Profile Analysis curves were obtained for each production area, based on the characteristics of the chemical species present in each zone. With this study it was possible to develop a method using hydrochemistry and statistical analysis that can be used to distinguish the water produced in mature fields of oil, so that it is possible to identify the zone of production that is contributing to the excessive elevation of the water volume. / A ?gua produzida caracteriza-se como um dos res?duos mais comuns gerados durante as fases de explora??o e produ??o de petr?leo. Este trabalho tem como objetivo desenvolver metodologias baseadas em processos estat?stico-comparativos de an?lises hidrogeoqu?micas de zonas de produ??o com o objetivo de minimizar tipos de interven??es de altos custos para realiza??o de teste de identifica??o de fluidos TIF. Para o estudo, foram coletadas 27 amostras de cinco zonas de produ??o diferentes e foram medidos um total de 50 esp?cies qu?micas. Ap?s as an?lises qu?micas foi aplicado o tratamento estat?stico aos dados, utilizando o Software Estat?stico R, vers?o 2.11.1. O tratamento estat?stico foi realizado em tr?s etapas. Na primeira etapa, o objetivo foi verificar o comportamento das esp?cies qu?micas em estudo em cada zona de produ??o atrav?s da an?lise gr?fica descritiva. A segunda etapa consistiu em identificar uma fun??o que classificasse as zonas de produ??o de cada amostra, utilizando An?lise Discriminante. Na etapa de treinamento, a taxa de acerto de classifica??o da fun??o da an?lise discriminante foi de 85,19%. A etapa seguinte do tratamento estat?stico dos dados utilizou An?lise de Componentes Principais para, atrav?s da redu??o do n?mero de vari?veis obtidas a partir da combina??o linear das esp?cies qu?micas, tentar melhorar a fun??o discriminante obtida na segunda etapa e aumentar o poder de discrimina??o dos dados, por?m o resultado n?o foi satisfat?rio. Na An?lise de Perfis foram obtidas curvas para cada zona de produ??o, baseadas nas caracter?sticas das esp?cies qu?micas presentes em cada zona. Com este trabalho foi poss?vel desenvolver uma metodologia utilizando a hidroqu?mica e a an?lise estat?stica que pode ser utilizada para distinguir a ?gua produzida em campos maduros de petr?leo, de forma que seja poss?vel identificar a zona de produ??o que est? contribuindo para a eleva??o excessiva do volume de ?gua.

Orientador: Roger Darros Barbosa / Banca: Pedro Fernando Romanelli / Banca: Marcos Franke Pinto / Resumo: O objetivo desta pesquisa foi determinar o Perfil de Textura (TPA) em formulações comerciais de "carne bovina em conserva" (corned beef) enlatada processada termicamente e avaliar sua relação com os valores de esterilização (F0), com a Concentração da Proteína do Tecido Conjuntivo Colagenoso (CCTP) e com a Concentração da Proteína do Tecido Muscular (MTP). Foram selecionados 14 lotes de produção de corned beef em latas tronco trapezoidais de 340 g correspondentes ao padrão continental Campden A e destes foram retiradas 24 latas do produto dos sub lotes submetidos ao processamento térmico. Destas latas foram retiradas seis amostras aleatórias para determinação do TPA e para análise da composição visando determinação da Proteína do Tecido Conjuntivo Colagenoso (CCTP), da Proteína do Tecido Muscular (MTP) e do Conteúdo Carne Magra (LMC). As latas de corned beef analisadas foram submetidas a tratamentos térmicos de 75,0 a 76,7 minutos, com a temperatura da autoclave a 121o C e resfriamento a 35o C durante 60 minutos, obtendo-se valores de F0 no centro de massa do produto variando de 14,8 a 20 minutos. Os parâmetros de TPA dureza, fraturabilidade, coesividade, elasticidade, adesividade, mastigabilidade, gomosidade e resiliência foram determinados no bloco integral do produto bloco resfriado a 4ºC em oito pontos na superfície. Os mesmos blocos do produto utilizados para determinação do TPA foram analisados quanto à composição média, apresentando concentração de 0,4 a 2,5% para CCTP, de 21,7 a 25,3% para MTP e de 102,79 a 107,95% para LMC. Os tratamentos de corned beef avaliados apresentaram diferenças significativas pelo teste de Tukey nas médias dos parâmetros dureza, gomosidade, mastigabilidade, adesividade e elasticidade. Os três primeiros parâmetros apresentaram correlações significativas fortemente negativas com o valor... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The objectives of this research were the determination of the texture profile of canned corned beef thermally processed and to evaluate its relationship with the sterilization value (F0) and the composition. Fourteen production batches of Campden A grade 340-g corned beef cans were selected, from which twenty-four cans of the thermal process sub-batches were retrieved. From the sub-batches, six random sample cans were taken and its content submitted to the Texture Profile Analysis (TPA) and to the composition analysis to determine the concentration of the Collagenous Connective Tissue Protein (CCTP), the Muscular Tissue Protein (MTP) concentration and the Lean Meat Content (LMC). The corned beef samples analyzed were submitted to thermal treatments at 121o C (retort steam temperature) for varying heating times, from 75 to 76 minutes and cooled at 35o C (retort water temperature) during 35 minutes, to obtain F0 values at the product center point varying from 14.8 to 20 minutes. The TPA parameters were determined in 8 points of the whole corned beef loaf of each sample, previously chilled and stabilized at 4o C temperature, to obtain hardness, fracturability, cohesiveness, elasticity, adhesiveness, springiness, gumminess, chewiness and resilience. The same sample material were then analyzed in terms of average composition of the product, resulting in concentrations in the range of 0.4 to 2.5% for CCTP, 21.7 to 25.3% for MTP and content from 102.8% to 108.0% for LMC. The treated corned beef samples analyzed showed significant differences in the means for hardness, adhesiveness, chewiness and elasticity. These parameters showed dependence with the sterilization value (F0), revealing negative strong significant correlation for F0 with hardness, gumminess and chewiness. The MTP and LMC values showed a high positive significant correlation with cohesiveness. It was observed a high... (Complete abstract click electronic access below) / Mestre