Ce travail de thèse a été réalisé, dans le cadre de la convention CIFRE 1538/2010, au sein d'adixen Vacuum Products (aVP) à Annecy (France). Il a été en partie financé par le projet S.P.A.M. (Surface Physics for Advanced Manufacturing). Il s'agit d'un projet ITN financé par le programme Pierre et Marie Curie de la Communauté Européenne rassemblant des partenaires universitaires et industriels dont aVP. L'objectif de ce programme était de contribuer à l'étude et au développement de la lithographie et en particulier la lithographie à ultraviolet extrême (EUVL). Ce travail porte sur la problématique de la contamination moléculaire dans l'industrie des semi-conducteurs ainsi que les besoins de maitrise de contamination pour la photolithographie EUVL. Pour ce faire, des modèles mathématiques de sorption ont été recherchés, testés et validés à l'aide d'une microbalance à quartz (QCM). Cette technique, possédant une très haute sensibilité (au niveau du ng), permet d'étudier les phénomènes de sorption relatifs à tout matériau déposable sur un cristal de quartz mis au contact de différents gaz dont la pression partielle est maitrisée. Par conséquent, le protocole détaillé dans cette thèse peut être utilisé pour d'autres types d'expériences dans toute discipline nécessitant une telle précision. Le déroulement de notre plan d'expérience comprend deux types de matériaux naturellement différents : un polymère (PCBA) d'une part et deux substrats métalliques (SS AISI 304 et CuC1) d'autre part pour lesquels le transfert de masse n'intervient pas de la même manière. Les gaz d'étude ont été sélectionnés pour leur intérêt dans l'industrie des semi-conducteurs (vapeur d'eau, HF). Le résultat de l'interaction des gaz d'étude avec les substrats ciblés est suivi en direct par la QCM, ce qui permet non seulement de valider et/ou améliorer les modèles mathématiques déjà disponibles dans la bibliographie mais aussi de les ajuster aux données obtenues expérimentalement. Nous pouvons ainsi non seulement prévoir le comportement des contaminants à l'équilibre (isothermes) et à l'état transitoire mais aussi réaliser des estimations de sorption à des températures autres que celles retenues pour notre plan d'expérience / This thesis was carried out within the framework of the CIFRE 1538/2010 convention at adixen Vacuum Products (aVP) in Annecy (France). It is has been partly funded by the ITN project SPAM (Surface Physics for Advanced Manufacturing). SPAM is an ITN project funded by the Pierre and Marie Curie program of the European Community bringing together academic institutions and industrial partners including aVP. The objective of this program was to contribute to the study and development of lithography and extreme ultraviolet lithography (EUVL). This work deals with the issues caused by the airborne molecular contamination (AMC) in the semiconductor industry and their control needs in EUVL and the current photolithography. In order to tackle the problem, sorption mathematical models have been investigated and validated using a quartz crystal microbalance (QCM). This technique, which confers a high sensitivity (ng level), allows the study of the sorption phenomena related to any deposable material onto a quartz crystal in contact with different gases whose concentrations are accurately controlled. Consequently, the protocol detailed in this thesis may be used for other types of experiments in any discipline requiring such precision. The conduct of our experimental plan includes two types of naturally different materials: a polymer (PCBA) on the one hand and two metallic substrates (stainless steel AISI 304 and CuC1) on the other hand, for which the matter transfer does not occur in the same manner. Studied gases were selected for their interest in the semiconductor industry (water vapor, HF). The resulting interaction between the studied gases and the targeted substrates is continuously followed by the QCM, which allows not only to validate the mathematical models already proposed by the literature but also to fit the experimentally obtained data. This enables us not only to predict the behavior of the AMC at equilibrium (isotherms) and the transient state but also to provide sorption estimations at temperatures other than those specified in our experimental plan

Byl studován kontakt mezi koulí a deskou pod tangenciálním zatížením ve vodě. Jako zdroj střižných kmitů byl použit akustický rezonátor (křemíkové mikrováhy – QCM). Kontakt koule s povrchem resonátoru indukuje změnu resonanční frekvence a šířky pásma. Byla měřena změna frekvence f a změna šířky pásma v závislosti na amplitudě oscilací. S rostoucí amplitudou docházelo k poklesu f a růstem , což je chování typické pro parciální skluz. Díky aplikaci Cattaneo-Mindlinova modelu byl vypočítán kontaktní poloměr a třecí koeficient. Kontaktní poloměr při nízké amplitudě stoupal při zvětšujícím se normálovým zatížením. Tato závislost se dobře shodovala s JKR modelem. Třecí koeficient se nacházel v odpovídajícím rozsahu. Při zvyšování externí normálové síly, docházelo k nepatrnému snižování hodnoty třecího koeficientu. Toto chování je vysvětleno příspěvkem adhezivních sil k totální normálové síle. Výpočtem byly získány dva typy třecích koeficientů, první ze změny frekvence f a druhý ze změny šířky pásma . Tyto dvě hodnoty se spolu shodovaly z ± 20 % pro měření prováděná ve vodě, zatímco pro dvě měření prováděných na hydrofilním povrchu ve vzduchu se lišila. Tento nesoulad poukazuje na nedostatek Cattaneo Mindlinovy teorie a mohl by být vysvětlen přítomností kapilárních sil.

The Gram-negative bacterium Pseudomonas aeruginosa is a life-threatening nosocomial pathogen due to its generally low susceptibility toward antibiotics. Furthermore, many strains have acquired resistance mechanisms requiring new antimicrobials with novel mechanisms to enhance treatment options. Proline-rich antimicrobial peptides, such as the apidaecin analog Api137, are highly efficient against various Enterobacteriaceae infections in mice, but less active against P. aeruginosa in vitro. Here, we extended our recent work by optimizing lead peptides Api755 (gu-OIORPVYOPRPRPPHPRL-OH; gu = N,N,N′,N′-tetramethylguanidino, O = L-ornithine) and Api760 (gu-OWORPVYOPRPRPPHPRL-OH) by incorporation of Ile-Orn- and Trp-Orn-motifs, respectively. Api795 (gu-O(IO)2RPVYOPRPRPPHPRL-OH) and Api794 (gu-O(WO)3RPVYOPRPRPPHPRL-OH) were highly active against P. aeruginosa with minimal inhibitory concentrations of 8–16 and 8–32 μg/mL against Escherichia coli and Klebsiella pneumoniae. Assessed using a quartz crystal microbalance, these peptides inserted into a membrane layer and the surface activity increased gradually from Api137, over Api795, to Api794. This mode of action was confirmed by transmission electron microscopy indicating some membrane damage only at the high peptide concentrations. Api794 and Api795 were highly stable against serum proteases (half-life times >5 h) and non-hemolytic to human erythrocytes at peptide concentrations of 0.6 g/L. At this concentration, Api795 reduced the cell viability of HeLa cells only slightly, whereas the IC50 of Api794 was 0.23 ± 0.09 g/L. Confocal fluorescence microscopy revealed no colocalization of 5(6)-carboxyfluorescein-labeled Api794 or Api795 with the mitochondria, excluding interactions with the mitochondrial membrane. Interestingly, Api795 was localized in endosomes, whereas Api794 was present in endosomes and the cytosol. This was verified using flow cytometry showing a 50% higher uptake of Api794 in HeLa cells compared with Api795. The uptake was reduced for both peptides by 50 and 80%, respectively, after inhibiting endocytotic uptake with dynasore. In summary, Api794 and Api795 were highly active against P. aeruginosa in vitro. Both peptides passed across the bacterial membrane efficiently, most likely then disturbing the ribosome assembly, and resulting in further intracellular damage. Api795 with its IOIO-motif, which was particularly active and only slightly toxic in vitro, appears to represent a promising third generation lead compound for the development of novel antibiotics against P. aeruginosa.

The investigations are related to the influence of nonionic polyethoxylated surfactant on Tin- and Tin-Silver depositions. Cyclovoltammetry, electrochemical depositions in Hull cell, with quartz crystal microbalance, impedance spectroscopy, X-ray diffraction, REM and others were used as methods of characterization. / Die Untersuchungen befasssen sich mit dem Einfluss von nichtionischen polyethoxylierten Tenside auf die Zinn- und Zinn-Silber-Abscheidung, die durch Zyklovoltammetrie, Abscheidungen in der Hullzelle, mit der elektrochemischen Quarzmikrowaage, der Impedanzspektroskopie, Röntgendiffraktometrie, Rasterelektronenmikroskopie und Tensiometrie charakterisiert wurden.

I värme- och kraftvärmeverk förbränns olika typer av bränslen för produktion av el och fjärrvärme. Vid förbränningen bildas rökgaser som innehåller föroreningar, till exempel tungmetaller, från bränslet. Anläggningarna har ofta krav på utsläpp både via rökgaserna och avloppsvatten. Rökgaserna renas därmed genom olika tekniker var av en vanlig teknik är rökgaskondensering. Vid rökgaskondenseringen bildas en vätska, kallad rökgaskondensat, som delvis innehåller tungmetaller från bränslet. Rökgaskondensatet måste renas innan det kan lämna anläggningen och det görs bland annat med tungmetalljonbytare. Jonbytarmassan i tungmetalljonbytarkolonnerna behöver bytas ungefär två gånger per driftsäsong då den inte längre kan binda mer tungmetaller. Detta är en kostnad för värme- och kraftvärmeverken som de vill minimera. I denna studie undersöktes om lokal provtagning och analys på ett kraftvärmeverk av ett antal utvalda tungmetaller i rökgaskondensat är en bra metod för att optimering av reningssteget med tungmetalljonbytare. Samt om detta kan säkerställa att miljökraven för tungmetaller i det renade rökgaskondensatet uppfylls. Med optimering avses att jonbytarmassornas fulla kapacitet utnyttjas, d.v.s. att byten av jonbytarmassor kan reduceras utan att riskera otillåtna halter av tungmetaller i de renade rökgaskondensatet till följd av att jonbytarmassorna använts för länge. Även tiden som behöver avsättas för lokal provtagning och analys dokumenterades. I dagsläget sker analyser hos ackrediterade laboratorium där det tar drygt två veckor att få resultatet och under väntetiden kan mycket på anläggningen förändras. En verifiering av resultaten från studien gjordes mot resultat från ett sådant. I denna studie undersöktes lokal provtagning och analys med mätinstrumentet FREEDD som bygger på tekniken kvartskristall mikrobalans (QCM-teknik). Andra alternativ för lokal analys har inte undersökts här.  Resultatet visade att det i dagsläget är svårt att med lokal provtagning optimera reningssteget med jonbytarmassor samt kontrollera utsläppen av tungmetaller via det renade rökgaskondensatet. Korrigeringar hos mätinstrumentet och provpunkterna behöver göras för att få pålitligt resultat. Tiden som behöver avsättas för provtagning och analys beror på vilken metall som ska analyseras då tiden för preparering av prov varierar. Men om det kan möjliggöra att anläggningarna kan använda jonbytarmassorna längre samt får kontroll på utsläppen via det renade rökgaskondensatet kan det vara lönsamt att avvara den tiden. / In heating and combined heat and power plants, different types of fuels are burned to produce electricity and district heating. During the combustion flue gases containing pollutants, such as heavy metals, are formed from the flue. The plants have requirements for low emissions, both from the flue gases and the wastewater. The flue gases are purified by various techniques and a common technique is flue gas condensation. During the flue gas condensation, a liquid called flue gas condensate, is formed, which partly contains heavy metals from the flue. The flue gas condensate must be cleaned before it can leave the plant. A step in the purification of the flue gas condensate is usually heavy metal ion-exchanger. The ion-exchange mass in the heavy metal ion-exchange columns needs to be changed approximately twice per operating season as it no longer has room to bind more heavy metals. This is an expensive cost for the heating and combined heat and power plants that they want to minimize. This study investigated whether local sampling and analysis at a cogeneration plant of a number selected heavy metals in flue gas condensate is a good method for optimizing the purifications step with heavy metal ion-exchangers. And if this can ensure that the environmental requirements for the heavy metals in the purified flue gas condensate are met. Optimization means that the full capacity of the ion-exchange masses is utilized, i.e. that the exchange of ion-exchange masses can be reduced without risking unauthorized levels of heavy metals in the purified flue gas condensate as a result of the ion exchange masses being used for too long.  The time needed for local sampling and analysis was also documented. At present, analyzes are done at accredited laboratories where it takes over two weeks to get the result and during that time much can be changes at the plant. A verification of the result of the study was also made against the result of an accredited laboratory. In this study, local analysis was made with the measuring instrument FREEDD which is based on quartz crystal microbalance (QCM-technology). Other options for local sampling and analysis have not been investigated. The result showed that, in the present, it is difficult to optimize the purification step with ion-exchange masses and check emissions of heavy metals with the purified flue gas condensate. To obtain reliable result, corrections to the measuring instrument and test points need to be made. The time that needs to be set aside for sampling and analysis depends on the metal, as the time for sample preparation varies.  But if it can enable the plants to use the ion-exchange masses longer and gain control of the emissions of heavy metals with the purified flue gas condensate, it can be profitable to save that time.

Denna avhandling presenterar experimentella studier av polyelektrolytadsorption på motsatt laddade ytor, där substrat av både kiseloxid och blekt barrsulfatmassa har använts. Ett huvudsakligt syfte med denna forskning var att karaktärisera konformationen hos adsorberade skikt av katjonisk polyakrylamid (CPAM) i jämförelse med katjonisk dextran (Cdextran) och relatera denna information till inbindningskapaciteten av kolloidal kiselsyra. Ett andra syfte i denna avhandling var att studera kinetiken för sekventiell adsorption av polyamidamin epiklorhydrin (PAE) och karboxymetyl cellulosa (CMC) på massafibrer och att bestämma adsorptionsisotermer för deponering av polyelektrolyter skikt för skikt på massafibrer. Adsorptionen av CPAM på kiseloxidytor studeras med stagnationspunkts-reflektometri och kvartskristalls-mikrogravimetri för att bestämma adsorptionskinetiken och mättnadsadsorptionens beroende av polyelektrolytens laddningstäthet, pH och NaCl koncentration. Konformationen hos adsorberade skikt av CPAM och Cdextran bestämdes både före och efter sekundär tillsats av kolloidal kiselsyra (CS) och adsorptionen av CS kvantifierades också som funktion av yttäckningen av polyelektrolyt. Resultaten indikerar att laddningstätheten hos CPAM kontrollerar den adsorberade mängden på kiseloxidytor vid låga NaCl koncentrationer. Både adsorptionen av CPAM och Cdextran på kiseloxid visades vara effektiv i NaCl koncentrationer upp till 1 M, vilket indikerar ett signifikant bidrag av icke-jonisk interaktion mellan polyelektrolyterna och kiseloxid. Adsorptionen av CS var högre på föradsorberad CPAM än Cdextran. Konformationen hos de adsorberade skikten efter tillsats av CS sågs expandera signifikant för skikt baserade på CPAM medan skikt av Cdextran vid låga salthalter verkade återta sin konformation efter en temporär expansion. I den andra delen av avhandlingen studerades sekventiell adsorption av PAE och CMC på massafibrer. Adsorptionsisotermer skikt för skikt på avkryllad massa visade att PAE adsorberade i större mängd än CMC, både i hänseende av massa och laddning. Adsorptionen av PAE var signifikant långsammare än CMC och adsorptionstiden till 90% av mättnadsadsorptionen bestämdes till 3 respektive 1 minut. Zetapotentialen för kryll bestämdes för adsorption av de två första polyelektrolytskikten och resultaten tydde på att kryllmaterialet omladdade inom en minut efter tillsatserna av polyelektrolyt. Reflektometriförsök inom sekventiell adsorption av PAE och CMC på kiseloxid antydde att den låga molekylviktsfraktionen av PAE störde uppbyggnaden av polyelektrolyt-multiskikten. / This thesis presents experimental studies of polyelectrolyte adsorption on oppositely charged surfaces, where substrates of both silica and bleached softwood kraft pulp were used. A major aim of this research was to characterise the conformation of adsorbed layers of cationic polyacrylamide (CPAM), in comparison to cationic dextran (Cdextran), and relate this information to the binding capacity of colloidal silica. A second aim in this thesis was to study the kinetics of the sequential adsorption of polyamide epichlorohydrine (PAE) and carboxymethyl cellulose (CMC) on pulp fibres, and to determine the adsorption isotherms for the layer-by-layer deposition of polyelectrolytes on pulp fibres. The adsorption of CPAM on silica surfaces was studied using stagnation point adsorption reflectometry and quartz crystal microgravimetry to determine its adsorption kinetics as well as the dependencies of polyelectrolyte charge densities, pH, and NaCl concentration on saturation adsorption. The conformation of adsorbed layers of CPAM and Cdextran, analysed in terms of amount of water and layer thickness, was determined both before and after the secondary adsorption of colloidal silica (CS), and the adsorption of CS was also quantified as a function of the surface coverage of the polyelectrolyte. Results indicate that the charge density of CPAM controlled the amount of the polyelectrolyte adsorbed on silica surfaces at low NaCl concentrations. The adsorption of both CPAM and Cdextran on silica was shown to be effective at up to 1 M NaCl concentrations, which indicates that non-ionic interactions between the polyelectrolytes and silica contribute significantly. CS adsorption was higher on pre-adsorbed CPAM than on Cdextran. The conformation of the adsorbed layer after CS addition was seen to expand significantly in CPAM-based layers, while the Cdextran layer appeared to restore its conformation after a temporary expansion at low salt concentrations. In the second part of the thesis, the sequential adsorption of PAE and CMC on pulp fibres was determined using the polyelectrolyte titration technique. Layer-by-layer adsorption isotherms derived on fractionated pulp showed that PAE adsorbed in higher amounts than CMC did, both in terms of adsorbed mass and adsorbed charge. The adsorption of PAE was significantly slower compared to CMC, and the adsorption times required to reach 90% of the saturation adsorption were 3 and 1 min, respectively. The zeta potential of pulp fines was determined for the adsorption of the two first polyelectrolyte layers, and data indicated that the fines recharge within one minute after the polyelectrolyte additions. Reflectometry experiments regarding the sequential adsorption of PAE and CMC on silica indicated that the low-molecular-weight fraction of PAE disturbed the formation of polyelectrolyte multilayers. / QC 20101112

No description available.

No description available.

Carbon-based materials are poised to be an important class of 21st century materials, for bio-medical, bio-electronic, and bio-sensing applications. Diamond and polymers are two examples of carbon-based materials of high interest to the bio-materials community. Diamond, in its conductive form, can be used as an electrochemical bio-sensor, whilst its nanoparticle form is considered a non-inflammatory platform to deliver drugs or to grow neuronal cells. Polymers, especially when chemically modified, have been used extensively in biological environments, from anti-microbial use to drug delivery. The large-scale use of either material for biological use is limited by two factors: ease of chemical modification and the paucity of knowledge of their surface chemistry in aqueous media. This thesis addresses aspects of both these issues. The first study reported is an in situ study of the adsorption dynamics of an exemplar globular protein (bovine serum albumin, BSA) on nanodiamond using the relatively novel quartz crystal microbalance with dissipation (QCM-D) technique. For the first time, QCM-D enabled the detailed study of protein dynamics (i.e. kinetics, viscoelastic properties, overlayer structure, etc.) onto nanodiamond thin films having various surface chemistry and roughness. The dynamics of protein adsorption is found to be sensitive to surface chemistry at all stages of adsorption, but it is only sensitive to surface roughness during initial adsorption phases. Our understanding of the nanodiamond-biology interface is enhanced by this study, and it suggests that QCM-D is useful for the study of the surface chemistry of nanoparticle forms of inorganic materials. A second study concerns a novel surface functionalization scheme, based on carbene and azo-coupling chemistry, which has been recently introduced as a practical, facile method for modifying the surfaces of polymers. Using modern surface characterization techniques, it is demonstrated that a chemical linker can be attached to polystyrene surfaces using carbene-based chemistry, and that further chemical functionality can be added to this chemical linker via an azo-coupling reaction. In situ studies of protein dynamics at these interfaces were conducted using QCM-D, thus enabling a link between specific protein behaviour and the polymer surface chemical termination chemistry to be made. A third area of study of investigates the use of diamond electrodes as a bio-sensor for dopamine under physiological conditions. For these conditions, ascorbic acid interferes with the dopamine oxidation signal, in ways that render the two signals irresolvable. Various modifications are used in attempts to reduce this interference, including: small and large cathodic treatments, grafting of electro-active polymers, addition of carbon nanotubes, and hydrogen plasma treatment. Those modifications leading to the hydrogen-termination of diamond are shown to work the best. Notably, hydrogen plasma treatment effects the complete electrochemical separation of dopamine and ascorbic acid at a diamond electrode. This is the first time this has been accomplished without adding non-diamond materials to the diamond electrode surface.

Um polieletrólito catiônico (poliamina), com baixo peso molecular e elevada densidade de carga, normalmente aplicado como agente coagulante do lixo aniônico, foi usado para estudos de retenção e drenagem na fabricação de papel. O uso do carboximentil celulose de sódio para simulação do teor de lixo aniônico e seu efeito na retenção de cargas minerais foi uma característica importante para este trabalho. Pode ser observado que o aumento da dosagem do polímero catiônico tanto melhora a retenção de cargas minerais, avaliada pela turbidez do filtrado, quanto melhora a drenagem do sistema, avaliada pela velocidade de escoamento. Entretanto, elevadas dosagens deste polímero comprometeram os resultados destes parâmetros devido à inversão de carga do sistema. Pode também ser confirmado que forças de cisalhamento excessivas prejudicam a retenção de cargas minerais. Ademais, um polianfótero, com peso molecular e densidade de carga elevados, contendo grupos positivo (N-[3-(N,N-dimetilamino)propil]acrilamida), negativo (ácido metileno butanodióico) e nulo (acrilamida) na mesma cadeia, foi testado como agente de resistência a seco do papel. Todos os estudos em nível molecular sobre o comportamento do polianfótero em solução e o seu comportamento de adsorção sobre superfícies modelos carregadas, em diferentes condições de pH e de força iônica, foram importantes para explicar tanto dos fenômenos de adsorção, envolvendo fibras celulósicas e polianfótero, quanto o seu efeito na resistência mecânica do papel. Foi observado que a solubilidade do polímero aumenta à medida que o pH se distancia do seu ponto isoelétrico, pHPIE 7,3, e reduz para valores de pH próximos ao pHPIE. O tamanho das estruturas do polianfótero depende do pH do meio de dispersão. As características de tamanho do polianfótero tanto sob a forma de cadeias individuais ou quanto sob a forma de agregados, foram medidas através da técnica de espalhamento dinâmico de luz. As propriedades viscoelásticas das camadas adsorvidas e a quantidade de polímero adsorvida foram medidas através da técnica da balança microgravimétrica com dissipação de energia. Estas duas determinações, associadas às imagens no microscópio de força atômica, foram importantes para o entendimento dos resultados práticos do uso do polianfótero como agente de resistência a seco do papel. Maiores resultados de resistência do papel, avaliada através da resistência à tração, foram alcançados para valores de pH próximos ao ponto isoelétrico onde foram encontrados o seguinte: (1) maiores tamanhos para as estruturas do polímero em solução, (2) maior quantidade de massa nas camadas adsorvidas e (3) a formação de camadas mais viscoelásticas. O fenômeno de separação de fases, associado à mudança da solubilidade do polímero em solução devido ao balanço dos grupos positivos e negativos ionizados ao longo da faixa de pH estudada, foi considerado o principal aspecto para a variação em tamanho dos agregados. Embora este polímero tenha apresentado comportamento antipolieletrólito devido à expansão da sua cadeia e ao aumento da densidade de carga com o aumento da força iônica, considerando o efeito da força iônica para pH 4,3, o comportamento de adsorção do polianfótero foi avaliado como o comportamento de um polieletrólito monocarregado de alta densidade de carga. Maiores e menores quantidades de massas adsorvidas foram encontradas para valores intermediários e extremos de força iônica, respectivamente. As interações eletrostáticas foram consideradas as principais responsáveis pela adsorção do polímero sobre superfícies carregadas. Entretanto, a blindagem de cargas foi considerada a explicação para os baixos valores de massa adsorvida para valores mais elevados de força iônica. / A cationic polyelectrolyte (polyamine), with low molecular weight and high charge density, usually applied as anionic trash coagulant, was used for the retention and drainage studies in the papermaking. The use of sodium carboxymethyl cellulose to simulate the anionic trash content and its effect on the filler retention was an important feature of the work. It could be noted that the increasing of the cationic polymer dosage improves both the filler retention, evaluated by the turbidity of the filtrate, and the system drainage, evaluated by the flow speed. However, high dosages of this polymer compromised the results of these parameters due to the reversal of the system charge. It can also be confirmed that excessive shear forces affect the filler retention. Furthermore, a polyampholyte, with high molecular weight and charge density, containing positive (N-[3-(N,N- dimethylamino)propyl]acrylamide), negative (methylene butanedioic acid), and neutral (acrylamide) groups in the same chain, was tested as a dry strength agent. All of the studies at molecular level concerning to the polyampholyte behavior in the solution and its adsorption behavior on charged model surfaces at different conditions of pH and ionic strength, were important to explain both the adsorption phenomena, involving cellulosic fibers and polyampholyte, and its impact on the paper strength. It was observed that the polymer solubility increases as the pH moves away from its isoelectric point, pHIEP 7.3, and decreases when the pH approaches close to pHIEP. The sizes of the structures of the polyampholytes depend on the pH of the dispersion medium. Also the size characteristics of polyampholyte, both in individual and aggregated forms, were measured by dynamic light scattering technique. The viscoelastic properties of adsorbed layers, as well as the amount of the adsorbed polymer, were measured by quartz crystal microbalance technique with energy dissipation. These two measurements, associated with the atomic force microscopy images, were important to understand the practical results of polyampholyte usage as a dry strength agent. Best results of paper strength, evaluated by paper strength index, were achieved at pH close to the isoelectric point on which one were found the following features: (1) larger sizes of the polymer structures in solution, (2) higher amount of mass in the adsorbed layers, and (3) the formation of more viscoelastic layers. The phase separation phenomenon, associated with the change in the solubility of the polymer due to the balance of the positive and negative groups throughout the studied pH range, was considered the main aspect for the variation in size of the aggregates. Although this polymer shows antipolyelectrolyte behavior due to the expansion of the its chain and the increasing in charge density with the ionic strength, considering the effect of ionic strength at pH 4.3, the adsorption behavior of polyampholyte was evaluated as a monocharged polyelectrolyte behavior with high charge density. Major and minor amounts of adsorbed masses were found for intermediates and extremes values of ionic strength, respectively. The electrostatic interactions were considered the main cause of the adsorption on charged surfaces. However, the electrostatic screening was considered the explanation for the low values of adsorbed mass at higher values of ionic strength.