Master´s thesis describes the design and the check of the construction of the art gallery. This hall has the elliptical ground plan, the main dimensions are 25 x 40 m and the height is 12 m. The structure consists of 24 supporting curved ribs, which are supported on elliptical ring of steel at the top of the construction. Between the ribs are inserted purlins, which support the perimeter cladding. The structure is designed alternatively like the system of the timber solid beams from the glued laminated timber and the system of the steel truss girders.

Master´s thesis describes the design and check of the construction of botanical pavillion in Brno. The structure has an elliptical ground plan with dimensions 34 x 20 m, height of 9 m. The supporting structure consists of 16 support curved ribs which are braced at the top of the elliptical steel ring. Between the ribs are inserted purlins which support the perimeter cladding. The supporting structure is designed as an alternative system as girders of glued laminated timber and as system of steel truss girders.

No description available.

No description available.

No description available.

The proposed golf resort is situated near the village of Nevcehle in the sloping terrain. It is a brick building of concrete blocks with contact thermal insulation and with concrete floor structure. The building has two floors. House is based on plain concrete foundations. Roof is made up of metal plate-connected timber truss with metal roofing.

The subject of this thesis is the design and assessment of the supporting structure multifunctional building in the Czech Budejovice . The construction of a sphere with a maximum diameter of 30 m and a height of 19.5 meters the highest point . The supporting structure consists of curved ribs , elevator shaft and ceiling beams . The structure is designed in 4 versions . Two variants are made of steel, the third option is wooden and the latest version solves a combination of wood and steel. In the variant selected is done loading , ultimate limit state, serviceability limit state , fire resistance and compounds selected details.

Within the military there is great need for reliable communication between vehicles. During the planning and construction of a military RIB, Rigid-hulled Inflatable Boat, it is important to design an efficient antenna system that does not deteriorate out of disorder. It must also be ensured that the antennas transmitted power does not stay in the RIB boat. We have been given assignment to model and simulate a proposed antenna system and assess which tool is best suitable for the task. To analyze the antenna system we will look at the radiated electrical field together with the reflectionand EMC properties. The tool that we choose to use is a software called EMPro produced by Keysight Technologies. In this program we will create 3Dstructures for each individual object, the boat, the three antennas and the seawater. It’s also important to include each objects properties concerning material, so that they correctly reflect the reality. We are covering a broad spectrum with our antennas reaching from 1.6-30MHz, 30-88MHz and 100512MHz. The resulting simulation verifies that electromagnetic field would be powerful enough and that the antennas would not affect each other with the proposed placement. We could also confirm that our antennas reflected an inordinate amount of power but with cause that our models were not an exact replica of the antenna. The software EMPro is a suitable tool for this kind of projects concerning modeling and simulating antenna systems.Within the military there is great need for reliable communication between vehicles. During the planning and construction of a military RIB, Rigid-hulled Inflatable Boat, it is important to design an efficient antenna system that does not deteriorate out of disorder. It must also be ensured that the antennas transmitted power does not stay in the RIB boat. We have been given assignment to model and simulate a proposed antenna system and assess which tool is best suitable for the task. To analyze the antenna system we will look at the radiated electrical field together with the reflectionand EMC properties. The tool that we choose to use is a software called EMPro produced by Keysight Technologies. In this program we will create 3Dstructures for each individual object, the boat, the three antennas and the seawater. It’s also important to include each objects properties concerning material, so that they correctly reflect the reality. We are covering a broad spectrum with our antennas reaching from 1.6-30MHz, 30-88MHz and 100512MHz. The resulting simulation verifies that electromagnetic field would be powerful enough and that the antennas would not affect each other with the proposed placement. We could also confirm that our antennas reflected an inordinate amount of power but with cause that our models were not an exact replica of the antenna. The software EMPro is a suitable tool for this kind of projects concerning modeling and simulating antenna systems. / Inom militären finns stort behov av pålitlig kommunikation mellan fordon. Vid konstruktion av ett småfartyg i militärtoch bevakningssyfte är det viktigt att designa ett välfungerande antennsystem som inte försämras utav störningar, det ska även ses till att antennernas utsända effekt inte fastnar i småfartyget. Vi har fått en ritning av hur antennplaceringen är planerad, denna rapport går ut på att verifiera dess funktionalitet samt hitta en mjukvara som kan användas för att verifiera olika antennsystem. För att bedöma antennsystemet kommer denna rapport att undersöka att dess elektriska fält samt reflektionsoch EMC egenskaper, en uppgift som kan lösas med programvaran EMPro (Keysight). I programvaran skapas en 3Dstruktur som innehåller småfartyget, dess 3 stycken antenner samt omfattande havsvatten. Här tas hänsyn till objektens materialegenskaper, antennernas jordning samt de frekvenser antennerna arbetar på, 1.6-30MHz, 30-88MHz samt 100-512MHz. Simulering av systemet gav positiva resultat kring antennsystemets elektromagnetiskafält, antennerna kommer inte heller att störa varandra. Antennerna som vi har modellerat reflekterar orimligt mycket effekt, detta bortser vi från då vi inte haft tillgång till exakt avbildning av antennerna. EMPro är ett verktyg som är lämpligt att använda i detta samt liknande projekt. Dock krävs det att en kraftig dator finns tillgänglig då simuleringar av stora antennsystem baseras på stora uträkningar, som generellt tar lång tid.

Topologieoptimierte Geometrie wird vom Konstrukteur in einem Format benötigt, das im CAD verwendet werden kann. Die Herausforderung ist, dass man als Optimierungsergebnis eine STL-Geometrie bekommt, doch fürs CAD soll die Oberfläche möglichst glatt und vereinfacht sein. Die Software MSC Apex erzeugt aus einer STL-Geometrie eine echte, geglättete Parasolid-Geometrie. Eine spezielle Form der Topologieoptimierung ist die Topometrieoptimierung, welche die Rippenstruktur auf einem Blech vorschlägt. Auch hierfür ist Geometrierückführung möglich. Auch stark verformte Bauteile, z.B. Gummiteile, kann man als Geometrie im verformten Zustand ans CAD zurückgeben, um zu sehen, wie sie dann in die Baugruppe passen. / Topology optimized geometry must be provided to the designer in a format that can be used in CAD. The challenge is that the optimization result is typically an STL geometry, but for CAD the surface should be as smooth and simplified as possible. The MSC Apex software creates a real, smoothed parasolid geometry from an STL geometry. A special form of topology optimization is topometry optimization, which suggests the rib structure on a sheet. Reverse engineering is also possible for this. Even heavily deformed components, e.g. rubber parts, can be returned to CAD as geometry in the deformed state, to see how they fit into the assembly in this state.

Thesis(M.S.)--Auburn University, 2005. / Abstract. Vita. Includes bibliographic references.