Neste trabalho tivemos como objetivo sintetizar e caracterizar os ortossilicatos de elementos alcalino-terrosos com destaque para o Sr2SiO4, uma matriz hospedeira para íons dopantes como o cádmio II e o európio III, resultando em materiais com propriedades luminescentes. Outro objetivo é reduzir a temperatura de síntese pelos métodos aqui empregados em relação aos métodos convencionais descritos na literatura. Tanto a matriz quanto os sistemas dopados foram caracterizados por meio da difratometria de raios x, análise de área superficial e tamanho de poros, microscopia eletrônica de varredura e de transmissão. Os métodos empregados neste trabalho foram basicamente o da metátese e o do sal fundido, sendo que o método da metátese foi conduzido por sol-gel (utilizando-se sílica comercial e TEOS) e por precipitação em atmosfera ambiente e em atmosfera de nitrogênio. Já no método do sal fundido utilizamos duas temperaturas de síntese, 600 e 750ºC. A 750ºC foi utilizada uma mistura equimolar de cloreto de sódio e cloreto de potássio juntamente com nitrato de estrôncio e sílica mesoestruturada na proporção molar de 2:1. A 600ºC foi utilizada somente a mistura de nitrato de estrôncio e sílica mesoestruturada também na proporção molar de 2:1. Nestas duas formas de se conduzir a síntese por sal fundido utilizamos nitrato de sódio (proporção molar de Na/Si = 0,1) a fim de se facilitar a quebra das pontes de oxigênio da sílica e verificar a influência desse reagente sobre o produto final. Já o Ca2SiO4 e o Ba2SiO4 foram sintetizados apenas a 600ºC bem como as dopagens do Sr2SiO4 (1% em mol). Os resultados mostram uma densificação do produto em relação à sílica e a obtenção de nanofibras de silicatos obtidos pelo método do sal fundido. Já no método da metátese obtivemos carbonato de estrôncio e outros tipos de silicatos. / In this work our objective was to synthesize and characterize orthosilicates of alkaline-earth elements with emphasis on Sr2SiO4. This is a silicate host matrix for doping with ions such as cadmium II and europium III, resulting in materials with luminescent properties. Another objective is to reduce the synthesis temperature using the methods employed here when compared to conventional methods described the literature. Both the matrix and the doped systems were well characterized by X-ray diffraction, surface area and pore size distribution, scanning and transmission electron microscopy. The methods employed in this study were basically the metathesis and the molten salt; the metathesis method was conducted by sol-gel (using a commercial silica and tetraethyl orthosilicate TEOS) and precipitation in air and nitrogen atmospheres. In the molten salt method, two synthesis temperatures were used: 600 and 750ºC. At 750°C an equimolar mixture of sodium chloride and potassium chloride with strontium nitrate was used in addition to mesostructured silica in the molar ratio of 2:1. At 600°C only a mixture of strontium nitrate and mesostructured silica was used, also in the molar ratio of 2:1. In these two pathways, sodium nitrate (molar ratio Na/Si = 0.1) was used in order to facilitate the breakup of the silica oxygen bridges and its influence on the final product was also studied. Furthermore, Ca2SiO4 and Ba2SiO4 were synthesized only at 600ºC and the doping of Sr2SiO4 (1 mol %) was also carried out only at 600°C. The results show a densification of the product compared to the silica precursor and the formation of silicate nanofibers by the molten salt method. In the metathesis method we obtained strontium carbonate and other types of silicates.

Die Entwicklung neuartiger transparenter Materialien durch Kombination von organischen Polymeren und anorganischen Füllstoffen wurde untersucht. Für die Synthese der nanoskopischen anorganischen Füllstoffe wurde der Sol-Gel-Prozess für Metallfluoride mit Magnesium angewandt und auf Zirkonium und Titan erweitert. Auch wurden neue Herstellungs- und Trocknungsmethoden für die daraus gewonnenen Xerogele variiert und optimiert. Die Charakterisierung der hergestellten Metallfluorid-Sole und daraus gewonnener Nanopartikel erfolgte mittels NMR- und IR-Spektroskopie sowie SAXS- und TEM-Messungen und Elementaranalysen. Zur homogenen Mischbarkeit von anorganischen Füllstoffen und organischer Polymermatrix sind Modifikationen der Partikeloberfläche notwendig. Diese erfolgten über kovalent gebundene, teilweise perfluorierte, Carbonsäuren. Der Fortschritt der Modifizierung sowie die Eigenschaften der erhaltenen modifizierten Nanopartikel wurden mittels NMR- und IR Spektroskopie, teilweise auch mittels TA, untersucht. Unter Verwendung verschiedener transparenter und industriell relevanter Polymermatrices konnten durch homogene Verteilung der Nanopartikel transparente Kompositmaterialien erhalten werden. Die Veränderung der mechanischen und thermischen Eigenschaften der einzelnen neuen Materialien im Vergleich zu den reinen Polymeren wurde mittels DSC, Zugversuchen und Nanoindentation bestimmt. Zusätzlich zu diesen Anwendungsbereichen wurde der Einsatz der Nanopartikel in Elektrodenmaterialien zur Steigerung der Lebensdauer von Akkumulatoren und daraus resultierender Leistungsverbesserung untersucht. / The development of new transparent materials by combination of organic polymers and inorganic fillers was investigated. The fluorolytic sol-gel process was used to prepare fluorine containing nanoscopic inorganic fillers with magnesium, zirconium and titanium as metal components. The preparation and drying methods for the synthesis of xerogels was varied and optimized. Characterization of the metal fluoride sols and the nanoparticles obtained from the sols was executed by NMR and IR spectroscopy as well as SAXS and TEM measurements and elemental analysis. To achieve homogeneous miscibility for the inorganic fillers with the organic polymer matrix modification of the particles’ surface is crucial. This was achieved by covalent attachment of carbon acids; in case of fluorine polymers perfluorinated carbon acids were used. The progress of surface modification and the properties of the modified nanoparticles were monitored by NMR and IR spectroscopy. Based on thermal analysis, thermal stability of the modified nanoparticles was investigated. The modified metal fluoride nanoparticles were introduced into transparent and for industrial applications relevant polymer matrices. A homogeneous distribution to transparent nano composite materials was observed. The alteration of mechanical and thermal properties of the new materials was investigated by DSC, tension tests and nanoindentation and compared with the unmodified pure polymers. Another field of application of these nanoparticles is their application on electrode materials with the aim to improve electrode lifetime and to achieve a better performance of rechargeable batteries.

Ce travail de thèse présente une méthode de synthèse par le procédé sol-gel pour la préparation de matériaux hybrides organiques-inorganiques (OIH) basés sur le mélange de deux polyéthers différents, le poly (oxyde d´éthylène) (PEO) et le poly (oxyde de propylène) (PPO) liées de façon covalente avec l´agent de réticulation ureasil (U). Dû aux différents sites actifs présents dans la structure du matériau OIH, plusieurs cations métalliques peuvent être introduits dans la matrice hybride par complexation soit avec l´oxygène de type éther, soit avec l´oxygène du type carbonyle. Suite à ce constat, différentes matrices hybrides ont été synthétisées en introduisant des ions Eu3+ ou Li+ afin de conférer aux matériaux des propriétés optiques ou électriques. La compréhension des propriétés structurales et thermiques des différents polymères, l´ajout de différents cations Eu3+/Li+, et l'effet du plastifiant (PPO2000) dans la mélange hybride U-xPEO1900:/U-1-xPPO2000 (ratio de PPO2000 dans la mélange, x = 0.2, 0.5 et 0.8), ont été étudiés par DSC et SAXS. Les résultats de DSC ont révélé une unique température de transition vitreuse (Tg) pour tous les matériaux étudiés. L´ajout des ions Eu3+ dans le matrice n´a pas causé de variations dans les valeurs de Tg tandis que l´insertion de cations Li+ a provoqué une augmentation dans les valeurs de Tg, indiquant l´existence d’interactions entre les cations Li+ et la phase polymérique du matériau OIH. Les courbes de calorimètrie de l´U-PEO1900 ont aussi révélé la présence d´une pic endothermique à 25 °C, associé à la fusion des domaines cristallins du PEO1900. La présence d´un deuxième maximum dans les courbes de diffusion des rayons X à petits angles (SAXS) a confirmé l’existence de la structure semi-cristalline du PEO1900 dans une région de température entre -100 °C < T < Tf. Tous les échantillons, non-dopés et dopés avec les ions Li+ et Eu3+, ont montré un pic de corrélation indiquant que la nano-structure de la matrice hybride n´est pas affecté par le dopage avec les cations métalliques. Les études par Spectroscopie Infrarouge à Transformée de Fourier (FTIR) et par spectroscopie Raman ont confirmé l´interaction des ions Eu3+ avec l´oxygène du type carbonyle présent dans les groupes urées de la matrice hybride, et des ions Li+ avec l´oxygène du type éther. La photodégradation accélérée a révélé une perte des performances de la photo-luminescence (PL) associée à des changements dans la coordination des ions Eu3+ avec la matrice hybride. La photodégradation induit la formation de photo-produits venant de la β-scission du macroradical formé dans la portion organique de la matrice hybride. La β-scission peut-être responsable pour la diminution de la PL du matériau dû la perte de l´efficacité de l´effet antenne du ligand organique pour le centre luminescent. La transition dans la région visible du rouge vers le bleu avec la photodégradation qualifie ces matériaux de bons candidats pour l'application comme capteurs et marqueurs optiques. La conduction ionique des matrices hybrides dopés avec Li+ a été évaluée par Spectroscopie d´Impédance en fonction de la température et les résultats ont révélé des corrélations entre la superstructure lamellaire du PEO1900 et le mécanisme de conduction. L´addition d´un plastifiant, le PPO2000, a permis l´augmentation de la conductivité ionique dans une région de température entre -100 °C < T < 10 °C dû à l´augmentation de la portion amorphe utilisée comme chemin de transport ionique efficace dans le mélange polymère hybride U-xPEO1900/U-1-xPPO2000. / In this PhD thesis a greener synthesis route via sol-gel reactions aiming to prepare multifunctional organic-inorganic hybrid (OIH) materials based on blending of two polyether amine end chains (i.e., Jeffamine® compounds) Poly(ethylene oxide) (PEO) and Poly(propylene oxide) (PPO) covalently bonded with an ureasil cross-linking agent (U) is reported. Due to the different polar oxygen sites present in this OIH material, several metallic cations can to be introduced into the OIH matrix via ether- or carbonyl-type oxygen. So, different OIH matrices containing Eu3+ or Li+ cations were synthetized to evaluate their potential as photoluminescent or ionic conductor material, respectively. The thermal and structural characteristics of the Eu3+ or Li+ – loaded OIH materials, as well as the plasticizer effect of PPO2000 at the U-xPPO2000:/U-1-xPEO1900, (PPO2000 fraction x = 0.2, 0.5 and 0.8) blends, were carried out by DSC and SAXS. DSC results revealed a unique glass transition temperature (Tg) for all the studied OIH materials. The addition of Eu3+ cations do not change the Tg values while the Li+ cations caused an increase in the values of Tg, due to the Li+ interaction with the polymeric phase of the material. The U-PEO1900 calorimetric curves also showed the presence of an endothermic peak at 25 °C associated to the fusion of the crystalline domains of PEO1900. The second maxima observed in the curves of small angle X-ray scattering (SAXS) confirmed the presence of the crystalline structure of PEO1900 in a temperature range of -100 < T < Tf. All the samples, undoped and Li+ or Eu3+ doped ones, showed a correlation peak indicating that the OIH nano-structure is not affected by the metallic cations doping. Analysis carried out by Fourier Transform InfraRed (FTIR) and Raman Spectroscopy confirmed the Eu3+ cations interaction via the oxygen carbonyl-type present in the urea groups of the hybrid matrix, and that of Li+ cations with the oxygen ether-type. The accelerate photo-degradation revealed a loss of the photo-luminescence (PL) efficiency due to the changes in the Eu3+ cations coordination with the hybrid matrix. The photo-degradation induces the formation of photo-products from the macro-radical β-scission formed in the organic fraction of the hybrid matrix. The β-scission can be responsible for the material PL decrease due to the drop in the antenna effect from organic ligand to luminescent center. The visible emission transition from red → blue with the photo-degradation qualify these materials as good candidates to be applied as sensors and optical markers. The ionic conduction of the Li+-loaded hybrid matrices was investigated by Impedance Spectroscopy as a function of the temperature. Results showed a correlation between the lamellar superstructure of the PEO1900 and the conducting process. The plasticizers addition (PPO2000) alloyed to improve the value of the ionic conductivity in the low temperature range, -100 °C < T < 10 °C due to the increase of the amorphous fraction used as effective ionic transport pathway in the U-xPEO1900/U-1-xPPO2000 polymeric hybrid blend.

Orientador: Dayse Iara dos Santos / Resumo: O desenvolvimento de materiais cerâmicos é um campo de pesquisa cujos resultados são extremamente promissores para aplicações tecnológicas. Particularmente, no caso dos materiais nanoestruturados baseados no óxido titânio, observa-se grande potencial de aplicação em dispositivos optoeletrônicos, bem como, para processos de fotocatálise, visto que apresenta um bandgap direto de 3,2 eV. Além disso, o aperfeiçoamento das propriedades ópticas, por meio da interação entre óxidos de diferentes bandas eletrônicas, têm sido estudado por muitos autores. Por esta razão, compósitos nanoestruturados formados de dois ou mais óxidos, cujas propriedades são distintas quando isolados, têm sido sintetizados juntos e caracterizados a fim de avaliar possíveis interações sinérgicas. Neste trabalho, foram preparados e caracterizados os compósitos TiO2/CuO, TiO2/ZnO e TiO2/ZrO2. As sínteses foram realizadas pelo método Sol-gel original e pelo método Poliol modificado, e ambos os processos se mostraram propícios para a obtenção de nanocompósitos e óxidos nanoparticulados. O método Poliol produziu compósitos formados de partículas micrométricas de dióxido de titânio revestidas do segundo óxido, enquanto o processo Sol-gel resultou em material constituído de agregados de nanocristais com alta mesoporosidade. Por meio da difração de raios X dos pós tratados gradualmente até 1000 °C observou-se que a formação e cristalização dos óxidos ocorrem em temperatura mais alta quando o material é resultante do ... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The development of ceramic materials is a field of research whose results are extremely promising for technological applications. Particularly, in the case of nanostructured materials based on titanium oxide, there is a great potential for application in optoelectronic devices, as well as for photocatalysis processes, since it has a direct bandgap of 3.2 eV. In addition, the improvement of the optical properties through the interaction between oxides of different electronic bands has been studied by many authors. For this reason, nanostructured composites formed of two or more oxides, whose properties are distinct when isolated, have been synthesized together and characterized in order to evaluate possible synergistic interactions. In this work the TiO2 / CuO, TiO2 / ZnO and TiO2 / ZrO2 composites were prepared and characterized. The syntheses were carried out using the original Sol-gel method and the modified Polyol method, and both processes proved to be suitable for nanocomposites and nanoparticulate oxides. The polyol method produced composites formed of micrometric titanium dioxide particles coated with the second oxide, while the sol-gel process resulted in material composed of nanocrystalline aggregates with high mesoporosity. By X-ray diffraction of the powders gradually treated to 1000 °C it was observed that the formation and crystallization of the oxides occur at a higher temperature when the material is produced by the Sol-gel process. With the observation of the ... (Complete abstract click electronic access below) / Doutor

Submitted by Marilene Donadel (marilene.donadel@unioeste.br) on 2019-01-25T12:11:45Z No. of bitstreams: 1 Vinicius_Carvalho_2018.pdf: 2139357 bytes, checksum: 24497f5a37afd82fb7a7bb75a202949e (MD5) / Made available in DSpace on 2019-01-25T12:11:45Z (GMT). No. of bitstreams: 1 Vinicius_Carvalho_2018.pdf: 2139357 bytes, checksum: 24497f5a37afd82fb7a7bb75a202949e (MD5) Previous issue date: 2018-07-30 / The heterogeneous photocatalysis process is one of the treatment options for pollutants, which has presented excellent results. In this work, zinco oxide and Cu doped zinc oxide were synthesized by sol-gel method and applied as a catalyst in the degradation of the antibiotic ciprofloxacin hydrochloride (CIP) in aqueous medium, also using UV. The synthesized and comercial zinc oxide were analyzed by XRD. The mean crystallite size of sintethsized zinc oxide was 13-18 nm, estimated by the Scherrer’s equation, lower than the commercial zinc oxide that presented an average size of 35 nm. It was possible to observe that the sol-gel method was able to decrease the average size of the zinc oxide crystallite. The synthesized zinc oxides were able to decrease the concentration of ciprofloxacin around 24 to 31%, higher than the values found for the commercial oxide that was of 18%. However, it was noticed that with the increase of copper doping, the photocatalytic activity decreased.The results obtained by SEM showed that the sol-gel method was not effective in the reduction of the particles, however, it was able to form oxides with a surface area of 19,083 m².g-1 higher than the value of 12,202 m².g-1 found for commercial zinc oxide. TGA and FTIR demonstrate that there may still be amount of PVA in the synthesized oxides. The analyzed photocatalysts follow a first order reaction, for the more efficient photocatalyst a percentage of absorbance reduction (%RedAbs) at 272 nm of 66.49% was reported in 120 min, while commercial zinc oxide, this %RedAbs was 33.44% the same time interval. / O processo de fotocatálise heterogênea é uma das opções de tratamento para poluentes, a qual têm apresentado ótimos resultados. Neste trabalho foram sintetizados óxido de zinco e óxidos de zinco dopados com cobre em diversas proporções e com diferentes temperaturas de calcinação utilizando o método sol-gel e aplicá-los como catalisadores na degradação do antibiótico cloridrato de ciprofloxacino (CIP) em solução aquosa, empregando-se também luz UV. As amostras sintetizadas foram analisadas por DRX e comparadas com uma amostra de óxido de zinco comercial. O tamanho médio dos cristalitos obtidos foi de aproximadamente 13-18 nm, estimado pela equação de Scherrer, sendo inferiores ao óxido de zinco comercial que apresentou um tamanho médio de 35 nm. Foi possível observar que o método sol-gel foi capaz de diminuir o tamanho médio do cristalito de óxido de zinco. Os óxidos de zinco sintetizados foram capazes de diminuir a concentração de ciprofloxacino em torno de 24 a 31%, superior aos valores encontrados para o óxido comercial que foi de 18%, entretanto foi notado que com o aumento da dopagem de cobre ocorreu a diminuição da atividade fotocatalítica. Os resultados obtidos por MEV demonstram que o método sol-gel não foi efetivo na diminuição das partículas, entretanto, foi capaz formar óxidos com área superficial de 19.083 m².g-1 superior ao valor de 12.202 m².g-1 encontrado para o óxido de zinco comercial. Análises de TGA e FTIR demonstram que ainda pode haver quantidade de PVA nos óxidos sintetizados. Os fotocatalisadores avaliados seguem uma reação de primeira ordem, no qual para o melhor fotocatalisador foi verificado um percentual de redução da absorbância (%RedAbs) em 272 nm de 66,49% em 120 min, enquanto que para o óxido de zinco comercial, este %RedAbs foi de 33,44% no mesmo intervalo de tempo.

Este trabalho mostra estudos das propriedades eletroquímicas do eletrodo de diamante dopado com boro (DDB) e descreve a utilização de eletrodos de DDB, modificados direta ou indiretamente pelo método Sol-gel, para a oxidação de metanol e de etanol em meio ácido. Do estudo das propriedades superficiais do diamante concluiu-se que a polarização catódica é bastante apropriada para um bom desempenho do material é que não introduz diferenças estruturais detectáveis no filme de DDB, indicando que a melhora na resposta eletroquímica é devida somente a mudanças superficiais. Entretanto, polarizações catódicas consecutivas e extensivas por longos períodos de tempo produzem uma erosão da superfície do eletrodo. Adicionalmente, estudos realizados usando voltametria cíclica e espectroscopia fotoeletrônica de raios X, mostraram que a superfície de eletrodos de DDB pré-tratados catodicamente tem um comportamento eletroquímico dinâmico, apresentando uma perda da reversibilidade para o sistema Fe(CN)63-/4- em função do tempo de exposição ao ar. Isto é devido, possivelmente, à perda de hidrogênio superficial decorrente da oxidação da superfície do eletrodo pelo oxigênio do ar. Este comportamento dinâmico da superfície do DDB é inversamente dependente ao teor de boro do eletrodo. Foi observado também que a quantidade de sítios ativos disponíveis na superfície do eletrodo é diretamente proporcional à dopagem do mesmo e deve ser conseqüência da quantidade de boro superficial. Desses estudos concluiu-se que todos os eletrodos de DDB com distintas dopagens usados nesta tese (300, 800, 2000 e 8000 ppm de B) apresentam uma superfície eletroquímica heterogênea (sítios ricos em boro que apresentariam uma alta condutividade e sítios de diamante com terminação hidrogênio com menor condutividade), quando polarizados catodicamente e parcialmente bloqueada (diamante com terminações oxigênio) quando polarizados anodicamente, formando arranjos de microeletrodos (provavelmente sítios ricos em boro). As superfícies do diamante foram modificadas diretamente com Pt, Pt-RuO2 e Pt-RuO2-RhO2 pelo método Sol-gel. Estes depósitos de catalisadores apresentavam tamanhos nanométricos e mostraram um bom contato elétrico com a superfície do diamante e elevada pureza, assim como, uma composição atômica bem controlada e uma distribuição homogênea na superfície do DDB. Os estudos da oxidação eletroquímica de metanol e de etanol sugerem fortemente que o envenenamento da superfície do eletrodo é grandemente inibido sobre o catalisador ternário Pt-RuO2-RhO2/DDB quando comparado com os eletrodos Pt-RuO2/DDB e Pt/DDB. Adicionalmente, esse eletrodo mostra uma excelente atividade catalítica para a oxidação de etanol, provavelmente devido à habilidade que o ródio tem para quebrar a ligação C-C somada ao mecanismo bifuncional que acontece no catalisador contendo Pt e Ru. Em seguida, realizaram-se modificações indiretas do DDB pela síntese de compósitos de pó de carbono modificados com metais e óxidos metálicos e posterior fixação usando uma solução de Nafion&#61666;. A oxidação dos álcoois foi estudada por voltametria cíclica e curvas de polarização em estado estacionário (diagramas de Tafel). Os sistemas investigados incluíram misturas metálicas binárias, ternárias e quaternárias contendo Pt, Ru, Ir, Rh, PbOx, TaOx e MoOx num total de 16 sistemas diferentes. Assim, os melhores catalisadores para a oxidação de metanol foram: Pt-Ru-TaOx-PbOx > Pt-Ru-TaOx-MoOx &#8776; Pt-Ru-MoOx-Ir enquanto que, para a oxidação de etanol foram Pt-Ru-TaOx-PbOx e Pt-Ru-PbOx-Rh. Consequentemente, catalisadores do tipo Pt-Ru-TaOx-M são promissores para futuras aplicações práticas. Finalmente, estudos preliminares realizados usando pó de DDB modificado diretamente com Pt-RuOx pelo método Sol-gel mostraram que este compósito apresenta uma excelente atividade catalítica para oxidação de metanol, que foi maior do que a observada sobre um catalisador comercial considerado como o estado da arte (Pt-Ru/C da E-TEK) nas mesmas condições experimentais. Desta forma, foi mostrada a possibilidade do uso de pó de DDB como suporte para eletrocatalisadores para aplicações em células a combustível que funcionem diretamente com álcoois. / The electrochemical properties of boron-doped diamond (BDD) surfaces as well as studies of the oxidation of methanol and ethanol in acid media on BDD surfaces modified with catalysts by the Sol-gel method are presented here. Studies of the surface properties of BDD electrodes revealed that a cathodic polarization (-3,0 V vs. HESS, 30 min) is necessary for a good performance of the system while no important bulk structural differences are introduced in the film indicating that the enhanced electrochemical responses brought on by the cathodic pre-treatment is only due to superficial changes. Meanwhile, repeated and extensive cathodic polarizations led to severe erosion of the electrode surface. On the other hand, studies performed using cyclic voltammetry and X-ray photoelectron spectroscopy have shown that, after a cathodic pre-treatment, the BDD electrode surface presents a dynamic behaviour that results in a loss of the reversibility towards the Fe(CN)6 4&#8722;/3&#8722; redox couple as a function of the time exposed to atmospheric conditions. This dynamic behaviour must be associated to a loss of superficial hydrogen due to oxidation by the air and is inversely proportional to the BDD doping level suggesting that the boron content has a stabilizing effect on the H-terminated surface. It was also observed that the amount of electrochemical active sites of the BDD electrode has a direct dependence with the doping level (maybe due to the amount of superficial boron). From those studies, it was concluded that all BDD electrodes used in this work having different doping levels (300, 800, 2000 and 8000 ppm of boron) posses, after cathodic polarization, electrochemical heterogeneous surfaces (i.e. boron-rich sites with high conductivity and H-terminated diamond sites with lower conductivity) while after anodic polarization the surface is partially blocked by O-terminated diamond sites, resulting in a behaviour that resembles microelectrode arrays (probably formed by the few boron-rich sites). The BDD surface was also modified directly with Pt, Pt-RuO2 and Pt-RuO2-RhO2 using the Sol-gel method. These catalysts deposits have nanometric sizes, good electrical contact with the diamond surface and high purity. They also show a well controlled atomic composition and a homogeneous distribution on the BDD surface. Methanol and ethanol electrochemical oxidation studies on those modified electrodes suggested that poisoning of the surface by undesired intermediates (most xvi probably CO) is highly inhibited on the ternary catalyst Pt-RuO2-RhO2/BDD when compared with the Pt-RuO2/BDD and Pt/BDD responses. Additionally, the observed catalytic activity for ethanol oxidation was excellent, probably due to the rhodium ability to break the C-C bond which was added to the bifunctional mechanism operating in Pt-Ru catalysts. In the sequence, indirect modifications of the BDD surface were carried out by the production of carbon powder composites modified with metals and metallic oxides by the Sol-gel method and their subsequent anchoring to the BDD using a Nafion&#61650;&#61472;solution. The alcohols oxidation on these electrodes was studied by cyclic voltammetry and steady-state polarization curves (Tafel plots). The investigated systems included binary, ternary and quaternary catalysts containing Pt, Ru, Ir, Rh, PbOx, TaOx and MoOx in a total of 16 different systems The higher catalytic activity towards methanol oxidation was observed in the sequence: Pt-Ru-TaOx-PbOx > Pt-Ru-TaOx-MoOx _ Pt-Ru-MoOx-Ir while for ethanol oxidation, the catalysts activity sequence was: Pt-Ru-TaOx-PbOx _ Pt-Ru-PbOx-Rh > Pt- Ru-Rh. Consequently, it was concluded that catalysts of the type Pt-Ru-TaOx-M are very promising systems to be used in future practical applications. Finally, preliminary studies carried out using BDD powder directly modified with Pt-RuOx by the Sol-gel method showed that this material has an excellent catalytic activity towards methanol oxidation reaction, being higher than that observed on a state of the art commercial catalyst (Pt-Ru/C from E-TEK) under the same experimental conditions. Thus, the feasibility of the use of BDD powder as catalysts support in direct-alcohol fuel cell systems was clearly established.

Le but de ce projet de thèse a été d’établir une nouvelle méthodologie permettant d’immobiliser des espèces paramagnétiques sur des silices mésoporeuses afin d’optimiser le processus de polarisation dynamique nucléaire. Pour ce faire, différentes matrices polarisantes, nommées HYPSO pour « HYbrid Polarizing SOlids », ont été préparées par un procédé sol-gel. Ces solides sont hautement poreux et des espèces paramagnétiques y sont liées de manière covalente. Un des avantages notable de cette méthode consiste à s’affranchir « d’agent glaçant » en raison d’une répartition homogène et aléatoire des radicaux à la surface des matériaux. Deux types de matrices polarisantes, HYPSO 2 et HYPSO 3 ont révélé des polarisations distinctes : P(1H)= 50% et P(1H)= 63%. Cette différence a été expliquée par l’influence de la matrice de silice qui offre de meilleures performances lorsque sa porosité est interconnectée dans les 3 dimensions de l’espace. Suite à ces résultats, de nouveaux matériaux (HYPSO 5) ont été préparés. L’influence de la taille des pores ainsi que celle des grains de silice sur la polarisation ont été étudiées. Des performances remarquables : P(1H)= 99% (± 5%) et P(13C)= 51 % ont été enregistrées, témoignant ainsi de l’efficacité de cette nouvelle méthode. De plus, les premières images IRM utilisant les HYPSO 5 en tant que matrices polarisantes ont été obtenues après hyperpolarisation d’une solution d’acétate de sodium de référence. Enfin, nous nous sommes intéressés à une nouvelle formulation basée sur des xérogels de silice. Des résultats préliminaires ont montré de bonnes polarisations avec la capacité d’utiliser un même monolithe pour polariser différents liquides / The goal of this PhD project was to develop a new methodology allowing to immobilize paramagnetic species on mesoporous silica in order to optimize the dynamic nuclear polarization process. For this purpose, different polarizing matrices, denoted as HYPSO for “HYbrid Polarizing SOlids”, were prepared through a sol-gel process. These solids are highly porous and paramagnetic species are covalently attached onto the surface. One of the noticeable benefit of this method lies in the possibility to remove the “glass forming agent” because of a homogeneous and random repartition of the radicals onto the surface of these materials. Two types of polarizing matrices, HYPSO 2 and HYPSO 3 gave distinct polarizations: P(1H)= 50% and P(1H)= 63%. This difference was explained by the influence of the silica matrix which provides better performances when its porosity is interconnected in the 3 dimensions of the space. Following these results, new materials (HYPSO 5) were prepared. The influence of the pore sizes as well as those of the silica grains on the polarization were studied. Remarkable performances: P(1H)= 99% (± 5%) et P(13C)= 51 % were recorded, thereby demonstrating the efficiency of this new method. Moreover, the first MRI pictures using HYPSO 5 as polarizing matrices were obtained after hyperpolarization of a sodium acetate solution. Finally, we were interested to a new formulation based on silica xerogels. Preliminaries results showed good polarizations and the ability to use only one monolith to polarize different liquids

Submitted by Angela Maria de Oliveira (amolivei@uepg.br) on 2019-02-27T21:17:17Z No. of bitstreams: 2 license_rdf: 811 bytes, checksum: e39d27027a6cc9cb039ad269a5db8e34 (MD5) Ariane Caroline.pdf: 6051822 bytes, checksum: c1a56154adb0e6b52f2cba5bb3654d0b (MD5) / Made available in DSpace on 2019-02-27T21:17:17Z (GMT). No. of bitstreams: 2 license_rdf: 811 bytes, checksum: e39d27027a6cc9cb039ad269a5db8e34 (MD5) Ariane Caroline.pdf: 6051822 bytes, checksum: c1a56154adb0e6b52f2cba5bb3654d0b (MD5) Previous issue date: 2018-12-06 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Este trabalho reporta a preparação, caracterização e aplicação de novos materiais híbridos silsesquioxanos, obtidos a partir do método sol-gel de síntese, que consistiu em reações de hidrólise e policondensação dos precursores a base de sílica e por meio da reação SN2 dos precursores com os ligantes orgânicos 4-(aminometil)piridina e imidazol, obtendo assim o Si4ampy+Cl- e o SiImi+Cl-, respectivamente. Os silsesquioxanos nitrogenados foram submetidos a técnicas de caracterização como RMN, DRX, MEV, UV-VIS, FTIR e BET para confirmação das estruturas apresentadas nesta tese, bem como a organofuncionalização dos materiais. No caso do Si4ampy+Cl-, verificou-se dois sítios de reação com ligação do carbono –α do grupo npropil ao nitrogênio do grupamento amino e do nitrogênio do anel piridínio, com proposta de dois arranjos da cadeia carbônica. O Si4ampy+Cl- foi aplicado na construção de eletrodos modificados com a NiTsPc, utilizando a técnica LbL para a fabricação de filmes finos. O eletrodo na configuração (Si4ampy+Cl-/NiTsPc)11 foi aplicado como sensor eletroquímico sensível ao nitrito, com r = 0,999 na faixa de 0,113 mmol L-1 a 0,860 mmol L-1, LD e LQ de 0,026 mmol L-1 e 0,127 mmol L-1, respectivamente e os valores de desvio-padrão foram de aproximadamente 3%, estando de acordo com recomendações da ANVISA e Inmetro. Outro emprego do Si4ampy+Cl- foi na estabilização de nanopartículas de prata para fabricação de filmes finos. A presença das Ag-NPs/Si4ampy+Cl- foi confirmada por UV-VIS, pela banda plasmon em 426 nm, as quais apresentaram distribuição com tamanho aproximado entre 12 e 131 nm, constatado por DLS e corroborado por MEV, apresentando boa estabilidade (= +43,4 mV). As Ag-NPs/Si4ampy+Cl- mostraram-se promissoras na modificação do eletrodo ITO com a NiTsPc, apresentando um crescimento linear do filme LbL e processos redox referentes à oxirredução do centro metálico e à oxidação do anel da ftalocianina vistos por voltametria cíclica, exibindo a capacidade do eletrodo modificado (Ag-NPs/Si4ampy+Cl-/NiTsPc)7 em eletrocatalisar espécies químicas. No geral, os eletrodos modificados (Si4ampy+Cl-/NiTsPc)11 e (Ag-NPs/Si4ampy+Cl-/NiTsPc)7 proporcionaram aprimoramento na resposta de corrente anódica e redução do potencial de oxidação comparado com o eletrodo não-modificado (ITO) em presença de nitrito. O SiImi+Cl- que foi destinado a adsorção dos íons Cu2+, Cd2+ e Ni2+, apresentou capacidade de troca iônica de 2,944 mmol g-1, resultado considerado excelente de acordo com a literatura para a aplicação proposta. Os resultados de adsorção mostraram a viabilidade do uso do SiImi+Cl- como eficiente material adsorvente, exibindo maior afinidade para os íons Cu2+ em pH 4. Ao aplicar os modelos de Langmuir e Freundlich nas isotermas de adsorção, verificou-se que tanto o pH como a natureza do íon são fatores que influenciaram o ajuste das isotermas aos modelos propostos. / This work reports the preparation, characterization and application of new silsesquioxanes hybrid materials obtained from the sol-gel synthesis method, which consisted of hydrolysis and polycondensation reactions of the silica-based precursors and SN2 reaction of the precursors with 4-(aminomethyl)pyridine and imidazole groups, obtaining Si4ampy+Cl- and SiImi+Cl-, respectively. Silsesquioxanes with nitrogen groups were characterized by techniques such as NMR, XRD, MEV, UV-VIS, FTIR and BET to confirm the structures presented in this thesis, as well as the materials functionalization. In the case of Si4ampy+Cl- two reaction sites were observed with carbon-α of the n-propyl group bonding with the amino group and the pyridinium ring, having as proposal two arrangements of the carbonic chain. The Si4ampy+Cl- was applied in the construction of electrodes modified with NiTsPc using the LbL technique for the thin films manufacture. The electrode in the configuration (Si4ampy+Cl-/NiTsPc)11 was applied for nitrite electrochemical sensor, with r = 0.999 in the range of 0.113 mmol L-1 to 0.860 mmol L-1, LD and LQ of 0.026 mmol L-1 and 0.127 mmol L-1, respectively and standard deviation values of approximately 3%, according to recommendations of ANVISA and Inmetro. Another use of Si4ampy+Cl- was the stabilization of silver nanoparticles for the thin films production. The presence of Ag-NPs/Si4ampy+Cl- was confirmed by UV-VIS technique by the plasmon band at 426 nm which presented a distribution with approximate size between 12 and 131 nm, verified by DLS and MEV, presenting good stability (= +43.4 mV). The Ag-NPs/Si4ampy+Cl- showed promising in the modification of the ITO electrode with NiTsPc, showing linear growth of the LbL film and redox processes related to the oxidation of the metal center and to the oxidation of the phthalocyanine ring observed by cyclic voltammetry, exhibiting the performance of the modified electrode (Ag-NPs/Si4ampy+Cl-/NiTsPc)7 to electrocatalyse chemical species. In general, the modified electrodes (Si4ampy+Cl-/NiTsPc)11 and (Ag-NPs/Si4ampy+Cl-/NiTsPc)7 obtained an improvement in the anodic current response and reduction of the oxidation potential compared to the unmodified electrode (ITO) in the presence of nitrite. The SiImi+Cl- was used to adsorb Cu2+, Cd2+ and Ni2+ ions and presented ion exchange capacity of 2.944 mmol g-1, which was considered excellent according to the literature for the proposed application. The adsorption results showed the viability of using SiImi+Cl- as an efficient adsorbent material, exhibiting a higher affinity for the Cu2+ ions at pH 4. Applying the Langmuir and Freundlich models to the adsorption isotherms, it was verified that both the pH as the nature of the ion are factors that influenced the adjustment of the isotherms to the proposed models.

Depuis une décennie, dans le domaine de la nanomédecine, les recherches s’orientent de plus en plus vers l’élaboration de nanomatériaux multifonctionnels avec l’espoir d’améliorer la précision des diagnostics ou encore l’efficacité des traitements à mettre en place. Dans ce contexte, notre travail visait à mettre en œuvre des nanoparticules hybrides Au@SiO2 de type cœur-coquille associant les propriétés photothermiques de la phase métallique à la fonction délivrance de médicaments du réseau inorganique poreux. Avec le greffage d’obturateurs organiques à l’entrée des pores de la silice, ces assemblages deviennent dès lors de véritables nanosystèmes « mécanisés ». La première partie du travail a donc concerné la synthèse du cœur du nanomatériau (nanoparticules d’or creuses appelées « nanoshells ») réalisée par un procédé de remplacement galvanique. L’influence des paramètres de synthèse sur la morphologie et la structure, sur l’état de surface ainsi que sur les propriétés optiques des nanoparticules a été largement discutée ici. Après la coupe transverse des nanoshells ainsi élaborées, les techniques d’analyse de surface (XPS, AES) ont permis de préciser la formation d’un alliage Ag-Au de composition hétérogène. L’élaboration d’une coquille de silice mésoporeuse autour des cœurs métalliques a ensuite été réalisée. Après avoir démontré le potentiel de ces nanoparticules pour le confinement moléculaire, les nano-objets Au@SiO2 ont finalement été fonctionnalisés par des assemblages supramoléculaires constitués d’un diaminoalcoxysilane (greffé à la surface) en interaction avec un macrocycle. Le couplage spécifique des techniques XPS et RMN a permis de caractériser précisément la fonctionnalisation. Une ouverture à ce travail a été initiée vers des systèmes davantage biocompatibles avec l’élaboration cette fois-ci d’une coquille hybride polymère/silice. Une première série de tests in vitro a permis d’explorer l’impact et l’interaction des nanoparticules avec des cellules de type HaCaT et a montré tout le potentiel de la poly-L-lysine dans cette approche. Cette étude originale propose de nouvelles informations dans l’étude des systèmes nanostructurés avec une caractérisation physico-chimique appropriée qui signale l’importance des phénomènes aux interfaces au sein de l’architecture hybride. Les perspectives visent maintenant à une optimisation fonctionnelle de ces nano-objets pour des applications en nanomédecine. / Nowadays, in the field of nanomedecine, the major challenge is to design multifunctional nanomaterials in order to improve diagnosis and treatment efficiency. In this context, our work has concerned the conception of hybrid Au@SiO2 core-shell nanoparticles combining the photothermal properties of the gold core and the drug delivery function associated with the inorganic porous network. The entrance pore functionalization with gatekeepers leads finally to mecanized nanosystems. The first part of the work has concerned the core material synthesis (hollow gold nanoparticles called « nanoshells ») which has been achieved by a galvanic replacement reaction. The influence of synthesis parameters on the structure, the morphology and on the optical properties has been studied. Moreover, the analysis of a nanoparticle cross-section by XPS and AES has evidenced the formation of a heterogeneous Ag-Au alloy. Then, the growth of a mesoporous silica shell on the metal cores has been conducted leading to Au@SiO2 nanomaterials. After demonstrating the potential of these core-shell nanoparticles for hosting molecules, the nano-objects have been functionalized with supramolecular nanovalves based on a diaminoalkoxysilane (grafted on the silica surface) interacting with a macrocycle. The combination of XPS and NMR allowed us to characterize precisely the functionalization. In a last section, we have been interested in the design of biocompatible systems with the elaboration of a hybrid polymer/silica shell. The in vitro effect and interaction of nanoparticles with HaCaT cells have been studied; the first results have demonstrated a real interest for using poly-L-lysine in these systems. This original study offers new details about the physico-chemical characterization of nanostructured systems which highlights the important role of interfaces in hybrid materials. The perspectives will concern the optimization of the synthesized nanosystems for direct nanomedicine applications.

Submitted by (lucia.rodrigues@ufrpe.br) on 2017-02-13T12:58:51Z No. of bitstreams: 1 Aline de Andrade Alves.pdf: 1102339 bytes, checksum: b203a6432ccdaef9ba8b28ee763a99f6 (MD5) / Made available in DSpace on 2017-02-13T12:58:51Z (GMT). No. of bitstreams: 1 Aline de Andrade Alves.pdf: 1102339 bytes, checksum: b203a6432ccdaef9ba8b28ee763a99f6 (MD5) Previous issue date: 2012-02-27 / The organofunctionalized silica was used as the solid support in the study of photophysical properties of lanthanides, in particular the Eu (III) ions, which functions as structural probe has been thoroughly discussed seeking new technological applications. In this study, were synthesized two novel organofunctionalized silica matrices and new lanthanide complexes containing sialic acid as ligand. These compounds were characterized via luminescence spectroscopy, infrared spectroscopy, thermal analysis and elemental analysis. Two routes were used to obtain functionalized silica with thenoyltrifluoracetonate. The elemental analysis and infrared spectroscopy data suggest the minimum structures proposed. The europium complex with sialic acid showed weak luminescence, which was expected due to even have low molar extinction coefficient. The solid phase synthesized consisting of silica coordinated to europium complex with thenoyltrifluoracetonate was sensitive to sialic acid. / A utilização da sílica organofuncionalizada como suporte sólido no estudo das propriedades fotofísicas dos íons lantanídeos em especial o íon Eu (III) que funciona como sonda estrutural, tem sido bastante discutido visando novas aplicações tecnológicas. Neste trabalho, foram sintetizadas duas matrizes inéditas de sílica organofuncionalizadas e novos complexos de lantanídeo contendo como ligante o ácido siálico. Esses compostos foram caracterizados via espectroscopia eletrônica de luminescência, espectroscopia na região do infravermelho, análise térmica e análise elementar. Foram utilizadas duas Rotas para obtenção da sílica funcionalizada com tenoiltrifluoroacetonato. Os dados de análise elementar e espectroscopia na região de infravermelho sugerem as estruturas mínimas propostas. Os complexos de európio com o ácido siálico apresentaram fraca intensidade de luminescência, o que já era esperado devido ao mesmo ter baixo coeficiente de extinção molar. A fase sólida sintetizada, constituída por sílica funcionalizada e coordenada a um complexo de tenoiltrifluoracetonato e európio é sensível ao ácido siálico.