<p>This project investigates a laser radar system. The system is based on the principles of time-correlated single photon counting, and by measuring the times-of-flight of reflected photons it can find range profiles and perform three-dimensional imaging of scenes. Because of the photon counting technique the resolution and precision that the system can achieve is very high compared to analog systems. These properties make the system interesting for many military applications. For example, the system can be used to interrogate non-cooperative targets at a safe distance in order to gather intelligence. However, signal processing is needed in order to extract the information from the data acquired by the system. This project focuses on the analysis of different signal processing methods.</p><p>The Wiener filter and the Richardson-Lucy algorithm are used to deconvolve the data acquired by the photon counting system. In order to find the positions of potential targets different approaches of non-linear least squares methods are tested, as well as a more unconventional method called ESPRIT. The methods are evaluated based on their ability to resolve two targets separated by some known distance and the accuracy with which they calculate the position of a single target, as well as their robustness to noise and their computational burden.</p><p>Results show that fitting a curve made of a linear combination of asymmetric super-Gaussians to the data by a method of non-linear least squares manages to accurately resolve targets separated by 1.75 cm, which is the best result of all the methods tested. The accuracy for finding the position of a single target is similar between the methods but ESPRIT has a much faster computation time.</p>

We have studied fundamental aspects of time-resolved two-photon excited fluorescence depolarisation. The thesis presents experimental as well as theoretical progress. We show that a multi-photon induced instrumental response function obtained from a suspension of gold nanoparticles is appropriate for the analysis of two-photon excited fluorescence decays obtained using time-correlated single photon counting detection. Theoretical expressions have been derived for the fluorescence anisotropy decay obtained upon two-photon excitation of various molecular systems in liquid solutions: a) an anisotropic rigid rotor that undergoes rotational diffusion in the presence of ultrafast unresolved restricted reorientations, e.g. librations. b) a molecular group covalently attached to a stationary macromolecule, and undergoing local reorientation in a uniaxial ordering potential. A new approach to the analysis of two-photon excited fluorescence depolarisation experiments was developed, which combines data obtained by using linearly and circularly polarised excitation light, in a global manner. In the analysis, knowledge about unresolved reorientations was obtained from one-photon excitation studies of the corresponding systems. By means of this procedure it has been possible to obtain quantitative information about the molecular two-photon absorption tensor for perylene and two of its derivatives. Thereby the symmetry of the final excited and intermediate vibronic states could be assigned. The analysis reveals that the two-photon transition studied with the 800 nm laser exhibits mixed character. An important finding from the experiments was that the two-photon absorption tensor appears to be solvent dependent. Furthermore, the thesis presents the first theoretical treatment of two-photon excited donor-donor energy migration in the presence of molecular reorientation and which applies the extended Förster theory. Explicit expressions for molecules that belong to the point groups D2h, D2 and C2v are given. Preliminary experiments are finally also reported on a two-photon excited donor-donor energy migration system consisting of a bisanthryl-bisteroid.

A kinetic model of electronic energy migration within pairs of photophysically non-identical fluorophores has been developed. The model applies to fluorescent groups that exhibit different photophysical and spectral properties when attached to different positions in a macromolecule. The energy migration within such asymmetric pairs is partially reversible, which leads to the case of partial donor-donor energy migration (PDDEM). The model of PDDEM is an extension of the recently developed donor-donor energy migration model (DDEM, F. Bergström et al, PNAS 96 (1999) 12477), and applies to quantitative measurements of energy migration rates and distances within macromolecules. One important distinction from the DDEM model is that the distances can be obtained from fluorescence lifetime measurements. A model of fluorescence depolarisation in the presence of PDDEM is also presented. To experimentally test the PDDEM approach, different model systems were studied. The model was applied to measure distances between rhodamine and fluorescein groups within on-purpose synthesised molecules that were solubilised in lipid bilayers. Moreover, distances were measured between BODIPY groups in mutant forms of the plasminogen activator inhibitor of type 2 (PAI-2). Measurements of both the fluorescence intensity decays and the time-resolved depolarisation were performed. The obtained distances were in good agreement with independent determinations. Finally, the PDDEM within pairs of donors is considered, for which both donors exhibit a nonexponential fluorescence decay. In this case it turns out that the fluorescence relaxation of a coupled system contains distance information even if the photophysics of the donors is identical. It is also demonstrated that the choice of relaxation model has a negligible effect on the obtained distances. The latter conclusion holds also for the case of donor-acceptor energy transfer.

The recent advancement of superconducting nano devices has allowed for making a Superconducting Nanowire Single Photon Detector (SNSPD), whose extraordinary features have strongly motivated the research community to exploit it in many practical applications. In this thesis, an experimental setup for testing the SNSPD has been established. It contains an in-house packaging that meets the requirements of RF/microwave and optoelectronic characterizations. The quantum efficiency and detection efficiency measurements have confirmed that our approach is satisfactory. The dark count performance has reached the anticipated level. The factors affecting rise and fall times of the photoresponses are addressed. Based on the successful setup, the characterizations including dc, small signal ac measurements have been undertaken. The measurements are aimed at quantitatively investigating Cooper pair density in the superconducting nanowire. The experimental method involves a two-step, small signal S-parameter measurement either in the presence or absence of optical powers. The subsequent measurements by varying the temperature and dc bias current have achieved remarkable understanding on the physical properties of SNSPD nanowires. Then, the electrically induced nonlinearity is studied via the large signal RF and Microwave measurements. The experiments are a set of one-tone and two-tone measurements, in which either the RF driving power is varied at a fixed frequency, or vice versa. Two major nonlinear microwave circuit analysis methods, i.e. time-domain transient and hybrid-domain harmonic balance analysis, are employed. The simulation result reveals the optimized conditions of reaching the desired nonlinearity. Finally, we have successfully measured the optoelectronic mixing products in an electrically pumped optoelectronic mixer, which has identical structures as that of the SNSPD. The experiments confirm that this mixer is not only sensitive to the classical light intensities, but also to that of the single photon level. Meanwhile, the quantum conversion matrices is derived to interpret the quantum optoelectronic mixing effects.

This project investigates a laser radar system. The system is based on the principles of time-correlated single photon counting, and by measuring the times-of-flight of reflected photons it can find range profiles and perform three-dimensional imaging of scenes. Because of the photon counting technique the resolution and precision that the system can achieve is very high compared to analog systems. These properties make the system interesting for many military applications. For example, the system can be used to interrogate non-cooperative targets at a safe distance in order to gather intelligence. However, signal processing is needed in order to extract the information from the data acquired by the system. This project focuses on the analysis of different signal processing methods. The Wiener filter and the Richardson-Lucy algorithm are used to deconvolve the data acquired by the photon counting system. In order to find the positions of potential targets different approaches of non-linear least squares methods are tested, as well as a more unconventional method called ESPRIT. The methods are evaluated based on their ability to resolve two targets separated by some known distance and the accuracy with which they calculate the position of a single target, as well as their robustness to noise and their computational burden. Results show that fitting a curve made of a linear combination of asymmetric super-Gaussians to the data by a method of non-linear least squares manages to accurately resolve targets separated by 1.75 cm, which is the best result of all the methods tested. The accuracy for finding the position of a single target is similar between the methods but ESPRIT has a much faster computation time.

The recent advancement of superconducting nano devices has allowed for making a Superconducting Nanowire Single Photon Detector (SNSPD), whose extraordinary features have strongly motivated the research community to exploit it in many practical applications. In this thesis, an experimental setup for testing the SNSPD has been established. It contains an in-house packaging that meets the requirements of RF/microwave and optoelectronic characterizations. The quantum efficiency and detection efficiency measurements have confirmed that our approach is satisfactory. The dark count performance has reached the anticipated level. The factors affecting rise and fall times of the photoresponses are addressed. Based on the successful setup, the characterizations including dc, small signal ac measurements have been undertaken. The measurements are aimed at quantitatively investigating Cooper pair density in the superconducting nanowire. The experimental method involves a two-step, small signal S-parameter measurement either in the presence or absence of optical powers. The subsequent measurements by varying the temperature and dc bias current have achieved remarkable understanding on the physical properties of SNSPD nanowires. Then, the electrically induced nonlinearity is studied via the large signal RF and Microwave measurements. The experiments are a set of one-tone and two-tone measurements, in which either the RF driving power is varied at a fixed frequency, or vice versa. Two major nonlinear microwave circuit analysis methods, i.e. time-domain transient and hybrid-domain harmonic balance analysis, are employed. The simulation result reveals the optimized conditions of reaching the desired nonlinearity. Finally, we have successfully measured the optoelectronic mixing products in an electrically pumped optoelectronic mixer, which has identical structures as that of the SNSPD. The experiments confirm that this mixer is not only sensitive to the classical light intensities, but also to that of the single photon level. Meanwhile, the quantum conversion matrices is derived to interpret the quantum optoelectronic mixing effects.

On demand single-photon and entangled-photon sources are key building-blocks for many proposed photonic quantum technologies. For practical device applications, epitaxially grown quantum dots (QDs) are of increasing importance due to their bright photon emission with sharp line width. Particularly, they are solid-state systems and can be easily embedded within a light-emitting diode (LED) to achieve electrically driven sources. Therefore, one would expect a full-fledged optoelectronic quantum network that is running on macroscopically separated, QD-based single- and entangled-photon devices. An all-electrically operated wavelength-tunable on demand single-photon source (SPS) is demonstrated first. The device consists of a LED in the form of self-assembled InGaAs QDs containing nanomembrane integrated onto a piezoelectric crystal. Triggered single photons are generated via injection of ultra-short electrical pulses into the diode, while their energy can be precisely tuned over a broad range of about 4.8 meV by varying the voltage applied to the piezoelectric crystal. High speed operation of this single-photon emitting diode up to 0.8 GHz is demonstrated. In the second part of this thesis, a fast strain-tunable entangled-light-emitting diode (ELED) is demonstrated. It has been shown that the fine structure splitting of the exciton can be effectively overcome by employing a specific anisotropic strain field. By injecting ultra-fast electrical pulses to the diode, electrically triggered entangled-photon emission with high degree of entanglement is successfully realized. A statistical investigation reveals that more than 30% of the QDs in the strain-tunable quantum LED emit polarization-entangled photon-pairs with entanglement-fidelities up to f+ = 0.83(5). Driven at the highest operation speed ever reported so far (400 MHz), the strain-tunable quantum LED emerges as unique devices for high-data rate entangled-photon applications. In the end of this thesis, on demand and wavelength-tunable LH single-photon emission from strain engineered GaAs QDs is demonstrated. Fourier-transform spectroscopy is performed, from which the coherence time of the LH single-photon emission is studied. It is envisioned that this new type of LH exciton-based SPS can be applied to realize an all-semiconductor based quantum interface in the foreseeable distributed quantum networks.

We develop a robust and realistic mechanism for the generation of indistinguishable single-photon (SP) pulses with identical frequency and polarization. They are produced on demand from a coupled double-Raman atom-cavity system driven by a sequence of laser pump pulses. This scheme features a high efficiency, the ability to produce a sequence of narrow-band SP pulses with a delay determined only by the pump repetition rate, and simplicity of the system free from complications such as repumping process and environmental dephasing. We propose and analyze a simple scheme of parametric frequency conversion for optical quantum information in cold atomic ensembles. Its remarkable properties are minimal losses and distortion of the pulse shape, and the persistence of quantum coherence and entanglement. Efficient conversion of frequency between different spectral regions is shown. A method for the generation of frequency-entangled single photon states is discussed. We suggest a robust and simple mechanism for the coherent excitation of molecules or atoms to a superposition of pre-selected states by a train of femtosecond laser pulses, combined with narrow-band coupling field. The theory of quantum beatings in the generation of ultra-violet radiation via a four wave mixing in pump-probe experiments is developed. The results are in good agreement with experimental data observed in Rb vapor when the laser phase fluctuations are significant.

Le Groupe de Recherche en Appareillage Médical de Sherbrooke (GRAMS) travaille actuellement sur un programme de recherche portant sur des photodiodes à avalanche monophotoniques (PAMP) opérées en mode Geiger en vue d'une application à la tomographie d’émission par positrons (TEP). Pour opérer dans ce mode, la PAMP, ou SPAD selon l’acronyme anglais (Single Photon Avalanche Diode), requiert un circuit d'étouffement (CE) pour, d’une part, arrêter l’avalanche pouvant causer sa destruction et, d’autre part, la réinitialiser en mode d’attente d’un nouveau photon. Le rôle de ce CE comprend également une électronique de communication vers les étages de traitement avancé de signaux. La performance temporelle optimale du CE est réalisée lorsqu’il est juxtaposé à la PAMP. Cependant, cela entraîne une réduction de la surface photosensible ; un élément crucial en imagerie. L’intégration 3D, à base d'interconnexions verticales, offr une solution élégante et performante à cette problématique par l’empilement de circuits intégrés possédant différentes fonctions (PAMP, CE et traitement avancé de signaux). Dans l’approche proposée, des circuits d’étouffement de 50 [mu]m x 50 [mu]m réalisés sur une technologie CMOS 130 nm 3D Tezzaron, contenant chacun 112 transistors, sont matricés afin de correspondre à une matrice de PAMP localisée sur une couche électronique supérieure. Chaque circuit d'étouffement possède une gigue temporelle de 7,47 ps RMS selon des simulations faites avec le logiciel Cadence. Le CE a la flexibilité d'ajuster les temps d'étouffement et de recharge pour la PAMP tout en présentant une faible consommation de puissance ( ~ 0,33 mW à 33 Mcps). La conception du PAMP nécessite de supporter des tensions supérieures aux 3,3 V de la technologie. Pour répondre à ce problème, des transistors à drain étendu (DEMOS) ont été réalisés. En raison de retards de production par les fabricants, les circuits n’ont pu être testés physiquement par des mesures. Les résultats de ce mémoire sont par conséquent basés sur des résultats de simulations avec le logiciel Cadence.

Bone is a remarkable multifunctional tissue with the ability to regenerate and remodel without generating any scar tissue. However, bone loss due to injury or diseases can be a great challenge and affect the patient significantly. Transplanting bone graft from one site in the patient to the site of fracture or bone void, i.e. autologous bone grafting is commonly used throughout the world. The transplanted bone not only fills voids, but is also bone inductive, housing the particular cells that are needed for bone regeneration. Nevertheless, a regenerative complement to autograft is of great interest and importance because the benefits from an off-the-shelf product with as good of healing capacity as autograft will circumvent most of the drawbacks with autograft. With a regenerative-medicine approach, the use of biomaterials loaded with bioactive molecules can avoid donor site morbidity and the problem of limited volume of material. Two such regenerative products that utilize bone morphogenetic protein 7 and 2 have been used for more than a decade in the clinic. However, some severe side effects have been reported, such as severe swelling due to inflammation and ectopic bone formation. Additionally, the products require open surgery, use of supra physiological doses of the BMPs due to poor localization and retention of the growth factors. The purpose of this thesis was to harness the strong inductive capability of the BMP-2 by optimizing the carrier of this bioactive protein, thereby minimizing the side effects that are associated with the clinical products and facilitating safe and localized bone regeneration at the desired site. We focused on an injectable hyaluronan-based carrier. The strategy was to use the body’s own regenerative pathway to stimulate and enhance bone healing in a manner similar to the natural bone-healing process. The hyaluronan-based carrier has a similar composition to the natural extracellular matrix and is degraded by resident hyaluronidase enzymes. Earlier studies have shown a more controlled release and improved mechanical properties when adding a weight of 25 percent of hydroxyapatite, a calcium phosphate that constitutes the inorganic part of the bone matrix. In Paper I, the aim was to improve the carrier by adding other forms of calcium phosphate. The results indicated that the bone formation was enhanced when using nano-sized hydroxyapatite. We wished to further develop the carrier system but were lacking an animal model with high output and easy access. We also wanted to provide paired data and were committed to the 3 Rs of refinement, reduction and replacement. To meet these challenges, we developed and refined an animal model, and this is described in Paper II. In Paper III, we characterized and optimized the handling properties of the carrier. In Paper IV, we discovered the importance of crushing the material, thus enhancing permeability and enlarging the surface area. In Paper V, we sought to further optimize biomaterial properties of the hydrogel through covalently bonding of bisphosphonates to the hyaluronan hydrogel. The results demonstrated exceptional retention of the growth factor BMP-2. In Paper VI, the in vivo response related to the release of the growth factor was examined by combining a SPECT/PET/µCT imaging method to visualize both the retention of the drug, and the in-vivo response in terms of mineralization.