Fuktbevarare är de produkter som oftast skrivs och rekommenderas av dermatologer, och den vanligaste typen av fuktgivare är lotioner och krämer. Dessa produkter är emulsioner, vilka ofta innehåller medicinsk vit olja (MWO) på grund av deras skyddande egenskaper samt enastående hudkompabilitet. Traditionellt så har de MWO som används varit parafinska. Då naftenoljor ofta har visat sig ha bättre emulsions stabilitet, har detta examensarbete ämnat attjämföra emulsions stabiliteten för Nynas ABs nya MWO, N-MWO, med en parafinsk motsvarighet, P-MWO. Jämförelsen av de två oljorna genomfördes genom att variera följande faktorer: olje- och emulgator typ, koncentration av emulgator samt både med och utan parfym. De två emulgator system som användes bestod av Promulgen D (en kommersiell produkt från Lubrizol) samt kombinationen av Tween 80 och Span 20. Bättre emulsionsstabilitet och mindre droppstorlek och fördelning utficks då högre koncentration Promulgen D användes. En högre koncentration av Tween 80 och Span 20 gav dock inte samma gynnsamma effekt. Resultaten från samtliga tester påvisade att emulsions stabiliteten inte påverkades utav parfym. Det som istället gav störst påverkan var typ av emulgator. De prover som innehöll P-MWO samt Tween 80 och Span 20 fasseparerade. Detta berodde dock troligen mer på att P-MWO inte var kompatibel med dessa emulgatorer eftersom oljetypen inte påverkade emulsionsstabiliteten när Promulgen D användes som emulgator. / Moisturizers are the most prescribed products in dermatology, and the most common type of moisturizer delivery systems are lotions and creams. These are emulsions and often contain medical white oil (MWO) due to their protective properties and excellent skin compatibility. The MWO used in cosmetics have traditionally been paraffinic. However, as naphthenic oils often have been proven to create better emulsion stability, this thesis aimed to compare Nynas AB's new MWO, N-MWO, with a paraffinic oil, P-MWO, with similar properties regarding their emulsion stability. The two oils were compared by analyzing their emulsion stability using a rheometer and a Mastersizer 3000 while varying the following factors: type of oil, type of emulsifier, emulsifier concentration, and with and without perfume. The two emulsifying systems used were the commercial product Promulgen D from Lubrizol and the combination of Tween 80 and Span 20. Better emulsion stability and smaller droplet size distribution were obtained when a higher content of Promulgen D was added. However, a higher concentration of Tween 80 and Span 20 did not have the same favorable effect. The results showed that the addition of perfume had no effect, while the type of emulsifier influenced the emulsion stability the most. The samples made from Supela 240 and Tween 80 and Span 20 phase separated. This was more likely due to P-MWOs incompatibility with these emulsifiers as oil type did not influence the emulsion stability when Promulgen D was used as an emulsifier.

Bakterier som är resistenta mot antibiotika har de senaste åren blivit ett stort hot mot mänskligheten. Att utveckla nya antibiotikaläkemedel är väldigt tidskrävande samt kommer med en dyr prislapp. Det är några av anledningarna att forskare har inriktat sig på antimikrobiella peptider (AMPs) som ett alternativ till traditionella antibiotika. Dessa peptider finns i alla levande organismer och uppvisar en snabb och ospecifik mekanism. Vidare så är de mindre benägna att utveckla resistens hos bakterierna. Däremot så har dessa AMPar visat sig ha låg stabilitet och en del toxiska biverkningar. Olika typer av nanobärare kan användas för att överkomma dessa kommakortanden. Syftet med denna studie var att utveckla en optimerad nanobärare för AMPen AP114. Peptiden har blivit inkluderad i nanostrukturerade lipidbärare (NLC) samt liposomer. Dessa har producerats med smält emulsifieringsmetod och lösningsinjektion metoden. De fysikalkemiska karaktäristik hos olika blanka samt AP115 laddade nanoformuleringar har analyserats samt jämförts. Resultaten indikerade att liposomformuleringarna hade den lägsta partikelstorleken och storleksfördelning men en kontrollerad in vitro frisättning av peptiden över 48 timmar. Generellt, så indikerar de preliminära resultaten en potential nanoformulering för peptiden AP114. / In the past few years, bacterial resistance to antibiotics has posed a major threat to humankind. Development of substitutes for traditional antibiotics is a highly time consuming and expensive venture. For this reason, researchers are focusing on using antimicrobial peptides (AMP) as an alternate. These peptides are found in all living organisms and exhibit a fast and non-targeted mechanism of action. Besides, they are less susceptible to microbial resistance. However, these therapeutic peptides are not stable and have toxic side effects. To overcome these limitations, drug delivery systems have been explored. In this study, the aim was to develop an optimized drug delivery system for AP114. The peptide has been encapsulated in nanostructured lipid carriers (NLC) and liposomes, produced by melt emulsification method and solvent injection method, respectively. The physicochemical characterization of different blank and AP114 loaded nanoformulations were analyzed and compared. The results indicated the liposome samples to have the lowest particle size distribution and polydispersity, with a controlled in vitro release of the peptide over 48 hours. Overall, these preliminary findings suggest a promising potential for the formulation of a nanocarrier for AP114 peptide.

No description available.

Twin screw wet granulation has been proved as a feasible alternative for traditional batch granulation process due to its continuous processing feature; considered as a significant processing method especially in the pharmaceutical industry. This thesis will explore the processibility of twin screw wet granulation with various formulations. The first section of the thesis focused on examining the processibility of wet granulation in a twin screw while using various grades of hydroxypropyl methylcellulose (HPMC) as an extended-release excipient. The method to find the processibility was by modifying the liquid-to-solid ratio for each formulation. The process window was defined by examining the amount of granules that fall in a pre-determined acceptable size range. This part focused on three substitution types of HPMC (Type 2910, Type 2208, and Type 2906) that varied in molecular weights. It was found that only Type 2910 HPMC showed a shift in the process window (also known as granulation range) in relation to the molecular weight of the formulations. A higher demand for binder liquid was found for higher molecular weight Type 2910 HPMC in order to form granules with acceptable sizes. The second part of this thesis was focused on understanding the process variables that might influence the processibility of the HPMC formulations. This part examined the impact of feed rate on the granulation range of Type 2910 HPMC specifically was examined. Multiple feed rates were tested, and it was found that the granulation range for lower molecular weight Type 2910 HPMC was easier to shrink when higher feed rates were applied. A transition in the granule formation method from liquid-bridging to compaction with respect to the feed rate was found for low molecular weight HPMC, whereas the high molecular weight HPMC always formed granules through compaction at all feed rates due to strong water retainability. / Thesis / Master of Applied Science (MASc)

In the constant pursuit of better-performing cemented carbides, recent studies suggest that a combination of better hardness and toughness can be obtained by changing its WC grain size distribution. As the area is still rather unexplored, this  thesis  aims  to  broaden  the  knowledge  and  answer  whether mechanical properties can be changed by changing the WC grain size distribution, in the context of mining drill bit inserts. This was performed by producing four dual grained material as well as four single grained reference materials, for which the carbon content and presence of alloying element were varied. The materials were characterised and compared with regard to magnetic saturation, magnetic coercivity,  hardness,  fracture  toughness,  wear resistance,  energy  needed  to cause  fracture,  as  well  as  detailed microstructural  analysis  obtained  through imaging and electron backscatter diffraction analysis The results showed that mining drill bit inserts with alternative WC grain size distribution  could  successfully  be  produced,  but  that  a  traditional  bimodal distribution  with  two  peaks  could  not  be  obtained.  The  distribution instead became significantly wider as well as skewed towards larger grains for the dual grained materials compared with their references. It was further also confirmed that the alternative dual grain size distribution could be used to improve the mechanical properties of fracture toughness and wear resistance, but only for material that was not alloyed, and the magnitude of the improvement may be considered  to  be  small.  For  the  alloyed  materials,  it  turned  out  to  be more difficult to influence the mechanical properties, as the improving effect of analloying element outweighed the effect of grain size distribution. / I en ständig jakt på hårdmetall med bättre prestanda, så föreslår ny forskning att en bättre kombination av hårdhet och seghet kan erhållas genom att ändra den mikrostrukturiella  WC-kornstorleksfördelning.  Då  det  ännu  är  ett relativt outforskat område, så har denna studie för avsikt att öka kunskapen genom att besvara frågan om de mekaniska egenskaperna kan förändras genom att ändra på materialets kornstorleksfördelning inom applikationsområdet hårdmetall för bergborrning. Detta gjordes genom att producera fyra material med WC pulver av två olika storlekar, samt fyra referensmaterial med en kornstorlek. För dessa varierades parametrarna kolhalt och närvaro av legeringselement. Materialen karakteriserades och jämfördes med avseende på magnetisk mättnad, magnetisk koercivitet, hårdhet,  brottseghet,  slitstyrka,  energi  som  behövs  för  att  orsaka brott, samt  en  detaljerad  mikrostrukturanalys  som  erhölls  genom  avbildning samt elektrondiffraktionsanalys. Resultaten visade att material med alternativ WC-kornstorleksfördelning kunde produceras, men att en fullt bimodal fördelning inte gick att skapa i denna studie. Fördelningen blev istället betydligt bredare samt förskjuten mot större korn för materialen som innhöll WC av två olika storlekar. Det bekräftades också att den alternativa     kornstorleksfördelningen     kunde     förbättra     de     mekaniska egenskaperna för brottseghet och slitstyrka, men endast för de material som inte var legerade och storleken på förbättringen får dessutom anses vara relativt liten. För de legerade materialen visade det sig vara svårare att påverka de mekaniska egenskaperna,  eftersom  den  förbättring  av egenskaper  som  legeringselement tillförde överträffade effekten av kornstorleksfördelning.

The development of tool steels for making and shaping other materials requires a better understanding of the material's properties during manufacture. These high-quality steels include many alloying elements, which give increased hardness during tempering. For producing hardened microstructures, austenite generation is essential. The martensite formed by rapid quenching of austenite followed by tempering helps develop high strength steels. Studying carbide precipitation is a challenge as they are very small in size, present only in small volume fractions and high number densities. The carbide reactions are complicated due to so-called metastable carbides, which are only present as part of the precipitation process. This work focuses on model alloys with two main elements in addition to iron and carbon, molybdenum, and vanadium, to clarify and simplify the carbide characterization. This is done to determine the effect of molybdenum and vanadium carbides on the overall hardness. In this work, two model alloys, A and B, are tempered at 550°C and 600°C with the same vanadium content but different molybdenum contents. The hardness of the materials is evaluated and compared at these temperatures. A more detailed characterization work is done for material A with Scanning Transmission Electron Microscopy-Energy Dispersive Spectroscopy (STEM-EDS) to understand the microstructure and analyze the precipitates. Simulations are performed with Thermo-Calc Prisma (TC-Prisma) to support the experimental work, which includes the simulation of the secondary carbide precipitation, mainly molybdenum carbides in material A tempered for 24h at 600°C, and predicts the carbide precipitation behavior in this steel. The results from STEM-EDS and TC-Prisma for material A, show that the small secondary carbides in the martensite contribute to the increased strength of material A. Due to the overaging of the carbides at 600°C, the hardness at 550°C is higher than at 600°C for material A. The given thesis work is an attempt to interpret the development of secondary carbides of Mo and V in the martensitic matrix and their role in the overall hardness. / Den ständiga utvecklingen av högpresterande stål för transport, konstruktion och energisektorn kräver bättre förståelse för materialets egenskaper vid tillverkning. Dessa martensitiska stål inkluderar många legeringselement vilket ger ökad hårdhet vid härdning och anlöpning. Att studera utskiljning av karbider är en utmaning eftersom de är närvarande endast i liten volymsfraktion. Karbidreaktionerna är komplexa till följd av så kallade metastabila karbider vilka endast är närvarande vid en del av utskiljningsförloppet. För att tydliggöra och förenkla karbidkarakteriseringen fokuserar detta arbete på modellegeringar med två huvudelement utöver järn och kol, molybden och vanadin. Detta görs för att fastställa effekten av molybden och vanadinkarbider på den totala hårdheten. I detta arbete studeras två modellegeringar, A och B, härdade och anlöpta vid 550 °C och 600 °C med samma vanadininnehåll men olika molybdeninnehåll. Materialens hårdhet utvärderas och jämförs vid dessa temperaturer. Ett mer detaljerat karaktäriseringsarbete görs för material A med hjälp av STEM-EDS för att förstå mikrostrukturen och analysera utskiljningarna. Simuleringar görs med TC-PRISMA för att stödja det experimentella arbetet, vilket inkluderar simulering av den sekundära karbidutskiljningen och predikterar karbidstrukturen i dessa stål. Resultaten visar att de små sekundärkarbiderna i martensiten bidrar till den ökade styrkan hos material A. Hårdheten vid 550 °C är högre än vid 600 °C för material A eftersom både utskiljningen av karbider är sker långsammare och även dislokationsåterhämtning.

Concrete is the most widely used man-made material in the world. Its versatility, strength, and relative ease of construction allow it to be used in the majority of civil infrastructure. However, concrete production plays a significant role in greenhouse gas emissions, accounting for around 8% of CO2 emissions worldwide. This thesis aims to reduce the demand for cement in concrete construction, thus reducing the carbon footprint of the concrete, by focusing on classifying and determining the effectiveness of seven different quarry by-products as partial replacements of cement. Several methods were utilized in this study to characterize the quarry by-products: particle size distribution, helium pycnometry, X-Ray diffraction, X-Ray fluorescence, scanning electron microscopy, and a modified ASTM C1897 Method A that utilizes isothermal calorimetry and thermogravimetric analysis. These various methods allowed for the determination of the physical properties (e.g., gradation, specific gravity, and morphology) and the chemical properties (e.g., mineralogy and reactivity in a cementitious system). The quarry by-products were classified as four granites, two limestones, and one greenstone. These quarry by-products were found to be non-pozzolanic and non-hydraulic. However, there are indications that there may be reactions with the various clays and feldspars in the quarry by-products with calcium hydroxide, which suggests a degree of reactivity that is not necessarily pozzolanic or hydraulic. / Master of Science / Concrete is the most widely used man-made material in the world. Its versatility, strength, and relative ease of construction allow it to be used in the majority of civil infrastructure. However, concrete production plays a significant role in greenhouse gas emissions, accounting for around 8% of CO2 emissions worldwide. This thesis aims to reduce the demand for cement in concrete construction, thus reducing the carbon footprint of the concrete, by focusing on classifying and determining the effectiveness of seven different quarry by-products as partial replacements of cement. Several methods were utilized in this study to determine the physical properties (e.g., gradation, specific gravity, and morphology) and the chemical properties (e.g., mineralogy and reactivity in a cementitious solution) of the materials. The quarry by-products were classified as four granites, two limestones, and one greenstone. In general, these quarry by-products were not found to be reactive as a supplementary cementitious material, although the data may suggest some degree of reactivity between calcium hydroxide and the clays and/or feldspars in the quarry by-products.

Les trois essais dans cette thèse étudient les implications des frictions financières, telles que les contraintes de collatérale ou de crédit, pour les décisions économiques des agents et leur impact sur les variables macro-économiques agrégées. Dans le premier chapitre "Financial Contracts and the Political Economy of Investor Protection" nous proposons une théorie du niveau de protection des investisseurs. Une faible protection des investisseurs implique un coût de financement externe plus élevé à cause des problèmes d'agence plus aigus entre les investisseurs et les entrepreneurs. À l'équilibre, ceci exclut les agents plus dépendants sur le financement externe de l'entrepreneuriat, ce qui augmente les profits des entrepreneurs qui restent actifs. Quand le niveau de la protection des investisseurs est choisi par un vote majoritaire, la théorie génère (i) une protection des investisseurs plus faible dans les économies avec plus grande inégalité dans les besoins de financement externe parmi les entrepreneurs, (ii) une dynamique non-monotone de l'output, (iii) améliorations (détériorations) de la protection des investisseurs suite à des ralentissements (accélérations) de l'output agrégé. L'évidence empirique donne un support à ces prédictions de la théorie. Dans le deuxième chapitre "Financial Frictions, Internal Capital Markets, and the Organization of Production", nous examinons comment la présence des frictions financières peut mener à la formation des conglomérats et des "business groups" diversifiées. Particulièrement, nous construisons un modèle d'équilibre général d'entrepreneuriat dans lequel les conglomérats émergent de façon endogène et substituent partiellement le marché du crédit imparfait. Nous montrons que ce modèle est capable d'expliquer quantitativement plusieurs faits stylisés concernant l'organisation de la production, les différences de productivité entre les firmes et les différences en présence des conglomérats entre les pays. Le troisième chapitre "Size and Productivity of Single-segment and Diversified Firms: Evidence from Canadian Manufacturing" étudie empiriquement la relation entre la taille, la productivité, et la structure organisationnelle d'une firme. Utilisant les micro-données sur les établissements manufacturiers canadiens, nous documentons plusieurs faits stylisés concernant la taille et la productivité totale des facteurs des établissements dans les conglomérats et dans les firmes non-diversifiées. Nous trouvons que les établissements dans les conglomérats sont en moyenne plus larges que leurs contreparties dans les firmes non-diversifiées, les petits établissements dans les conglomérats sont moins productifs que les établissements de taille similaire dans les firmes non-diversifiées, mais les larges établissements dans les conglomérats sont plus productifs que ceux de taille similaire dans les firmes non-diversifiées. Cette évidence est consistante avec réallocation interne efficiente des ressources au sein des conglomérats. / The three essays in this thesis study the implications of financial frictions, such as collateral and credit constraints, for economic decisions of agents and their impact on aggregate macroeconomic variables. In the first chapter "Financial Contracts and the Political Economy of Investor Protection", we propose a theory of the level of investor protection. Lower investor protection implies higher cost of external financing due to more severe agency problems between outside investors and entrepreneurs. In equilibrium, this excludes more financially dependent agents from entrepreneurship, increasing the profits of the remaining entrepreneurs. When the level of investor protection is chosen by majority voting, the theory generates (i) lower investor protection in economies with higher inequality in financial dependence across entrepreneurs, (ii) non-monotone output dynamics, (iii) improvements (worsening) of investor protection following output slowdowns (accelerations). The empirical evidence provides some support to these predictions. In the second chapter "Financial Frictions, Internal Capital Markets, and the Organization of Production", we investigate how the presence of financial frictions may lead to formation of diversified conglomerates or business groups. Specifically, we build a general equilibrium model of entrepreneurship in which business groups arise endogenously and partially substitute for imperfect credit market. We show that the model is able to quantitatively explain several key stylized facts on the way production is organized, on cross-firm productivity differences, and on cross-country differences in the degree of conglomeration. The third chapter "Size and Productivity of Single-segment and Diversified Firms: Evidence from Canadian Manufacturing" studies empirically the relation between size, productivity, and the organizational structure of a firm. Using micro-data on Canadian manufacturing plants, we document several stylized facts about size and total factor productivity of establishments in conglomerates and single-segment firms. We find that establishments in conglomerates are on average larger than their counterparts in single-segment firms, small plants in conglomerates are less productive than plants of similar size in single-segment firms, but large plants in conglomerates are more productive than those of similar size in single-segment firms. This evidence is consistent with efficient internal reallocation of resources in conglomerates.

Cette thèse a pour objet la comparaison des procèdes de polymérisation en émulsion et en miniémulsion. L'influence de la combinaison de stabilisants moléculaires et macromoléculaires sur la cinétique réactionnelle et la distribution de tailles de particules sont les critères pertinents dans notre étude. Un stabilisant polymère, le poly (alcool vinylique-co-acétate de vinyle) (PVA), a été synthétisé avec différents taux d'hydrolyse par saponification directe du polyacétate de vinyle. Le taux d'hydrolyse de ce copolymère a été caractérisé par la Résonance Magnétique Nucléaire du proton (RMN 1H). Puis, nous avons étudié l'influence de la composition d'un mélange stabilisant [copolymères poly (alcool vinylique-co-acétate de vinyle) (PVA)/laurylsulfate de sodium (SDS)] et en particulier le taux d'hydrolyse du PVA. La présence de complexe (PVA/SDS) influence légèrement la cinétique de polymérisation. Par contre la capacité des complexes à stabiliser les particules de latex final dépend du taux d'hydrolyse du PVA, plus ce dernier est faible, plus l'agrégation est importante. Enfin, nous avons suivi en ligne par spectroscopie Raman des polymérisations en émulsion et en miniémulsion du styrène. Une exploitation du spectre a été réalisée et a permis d'attribuer les différents pics aux vibrations de certaines liaisons. La consommation du monomère et l'apparition du polymère a pu être suivi tout au long de la polymérisation / The aim of this work is to compare processes of emulsion and miniemulsion polymerization. The influence of the combination of molecular and macromolecular stabilizers on the reaction kinetics and particle size distribution are relevant factors in our study. A stabilizer polymer, poly (vinyl alcohol-co-vinyl acetate) (PVA), was synthesized with different degrees of hydrolysis by a direct saponification of polyvinyl acetate. The degree of hydrolysis of this copolymer was characterized by Nuclear Magnetic Resonance (1H NMR). Then, we studied the influence of the composition of a mixture stabilizer [poly (vinyl alcohol-co-vinyl acetate) (PVA)/sodium lauryl sulfate (SDS)], and particulary the degree of hydrolysis of PVA. The presence of complex (PVA/SDS) influences slightly the kinetic of polymerization. The ability of the complexes to stabilize the particles of latex depends on the degree of hydrolysis of PVA, the lower it is, the more the aggregation is important. Finally, we followed in situ emulsion and miniemulsion polymerizations of styrene by Raman spectroscopy. The exploitation of the spectrum allowed us to assign the different peaks to vibrations of certain bands. The consumption of the monomer and the appearance of the polymer could be followed throughout the polymerization

Foram abordadas questões relacionadas com a temática da poluição atmosférica provocada pelo material particulado em suspensão. Dois ambientes foram selecionados para estudo: um ambiente de mineração e um ambiente urbano. Com o objetivo de obter uma avaliação preliminar da qualidade do ar nesses ambientes, foi realizado um programa de amostragem para cada área. Dois pontos básicos foram abordados nessa avaliação: a determinação da concentração de partículas totais em suspensão e a caracterização química e física do material particulado. A determinação das concentrações de partículas totais em suspensão foi obtida através do uso de amostradores de grande volume (Hi-vols). O método de referência utilizado foi o método do amostrador de grande volume proposto pela ABNT através da norma NBR 9547: 97. A caracterização física envolveu a determinação da distribuição granulométrica do material particulado em suspensão enquanto que a caracterização química compreendeu a determinação da sua composição. As técnicas analíticas utilizadas na caracterização do material particulado, foram a espectrometria de Fluorescência de Raios-X (XRF) para a caracterização química, e o Espalhamento de Luz Laser de Baixo Angulo (LALLS) para a caracterização física. Com relação às concentrações de partículas totais em suspensão, os resultados indicaram que as áreas de mineração apresentaram valores superiores aos encontrados na área urbana, inclusive com ultrapassagens dos padrões legais, fato este que não ocorreu na área urbana estudada. Para a distribuição granulométrica do material particulado, os resultados demonstraram que as frações mais finas do particulado apresentaram-se em maiores quantidades nas áreas de mineração, enquanto que as frações mais grosseiras apresentaram-se em maior quantidade na área urbana. Quanto à composição química do material particulado em suspensão, podemos concluir que para as áreas de mineração, esta foi muito semelhante à da rocha lavrada. / Atmospheric pollution aspects were analyzed. Two types of ambients were selected for study: a mining ambient and an urban ambient. To obtain a preliminary evaluation of the quality of the air in these ambients a sampling program was accomplished for each area. Two basic points were studied: the concentration of the total suspended particulates and the chemical and physical characterization of the particulate matter. The concentrations of total suspended particulates were obtained through the use of high volume samplers (Hi-vols). The reference method used was the high volume sampler method, proposed by ABNT through the norm NBR 9547: 97. The physical characterization involved the determination of the size distribution of the suspended particulate matter while the chemical characterization involved the determination of its composition. The analytic techniques used for the characterization of the particulate matter were the X-Ray Fluorescence (XRF) for the chemical characterization, and the Low Angle Laser Light Scattering (LALLS) for the physical characterization. Concentration levels for total suspended particulates showed that the mining areas presented higher values than those for urban area. Legal standards were exceeded in the mining area, fact that did not occur in the urban area. Size distributions of the particulate matter demonstrated that the finest fractions were found in larger amounts in the mining areas, while the coarses fractions were present in larger amounts in the urban area. The chemical compositions of the suspended particulate matter in the mining areas were very similar to the compositions of the rocks been mined.