Ce travail vise à étudier la rupture du gainage avec des essais mécaniques plus représentatifs des conditions RIA, en prenant en compte les blisters d'hydrures ainsi que le niveau élevé de biaxialité du chargement mécanique et des vitesses de déformation. Nous avons formé par thermodiffusion en laboratoire des blisters similaires à ceux observés sur des gaines de Zircaloy-4 irradiées en réacteur. Les caractérisations par métallographie, nanodureté, DRX et ERDA ont montré qu'un blister est constitué d'hydrures delta dont la concentration dans la matrice varie entre 80% et 100%, et que la matrice sous-jacente contient des hydrures radiaux. Nous avons modélisé la cinétique de croissance des blisters avec l'hystérésis de la limite de solubilité de l'hydrogène,puis défini le gradient thermique seuil permettant leur formation. Notre étude sur le comportement dilatométrique du zirconium hydruré montre le rôle important de la texture cristallographique du matériau, ce qui peut expliquer des différences de morphologie des blisters. En parallèle, des essais suivis par caméra infrarouge ont montré que des vitesses de déformation supérieures à 0,1/s induisent des échauffements locaux importants qui favorisent la localisation précoce de la déformation. Enfin, nous avons optimisé l'essai d'Expansion Due to Compression pour atteindre un niveau de biaxialité de déformation plane (essais HB-EDC et VHB-EDC), ce qui réduit fortement la déformation à rupture à 25°C et 350°C, mais seulement en l'absence de blisters. Un critère de rupture est proposé pour rendre compte de la baisse de ductilité des gaines en Zircaloy-4 non irradiées en présence de blisters.

O presente trabalho investiga o fenômeno termodifusivo em dispersões coloidais de nanopartículas magnéticas de óxidos de ferro em água (ferrofluidos), com a formação de dupla camada elétrica em torno das partículas. A estabilidade da partícula em solução é controlada pela concentração de íons. Ao estabelecer uma diferença de temperatura através da amostra líquida, ocorre o efeito de termodifusão (efeito Soret) das partículas e de íons em solução. Este efeito é o movimento das partículas para o lado frio ou quente do gradiente de temperatura. O acúmulo para um dos lados do gradiente de temperatura depende das características da solução. O efeito Soret de ferrofluidos em soluções ácidas e básicas é descrito a partir da determinação experimental das grandezas físicas envolvidas na difusão das partículas. O coeficiente Soret ST e o coeficiente de difusão são determinados em experimentos ópticos de lente de matéria, utilizando o aparato experimental de Varredura-Z, e de espalhamento Rayleigh forçado para termodifusão. Para investigar a resposta dos íons ao gradiente de temperatura, são realizadas medidas do potencial termoelétrico em uma célula termoelétrica, gerado a partir da difusão das cargas dispersas no líquido. O potencial superficial das partículas também é investigado experimentalmente, para descrever a interação das partículas com o campo termoelétrico. Os experimentos são realizados em função da temperatura da amostra e usados para descrever os resultados ST(T) das partículas, a partir de equações dos principais modelos teóricos. Os resultados mostram as diferenças e semelhanças do efeito Soret das nanopartículas em soluções ácidas e básicas, e que em ambos os casos a termodifusão de nanopartículas reflete o comportamento termodifusivo dos íons dispersos em solução. / This work investigates the thermal diffusion phenomena in colloidal dispersions of iron oxide magnetic nanoparticles dispersed in water (ferrofluid). The particles are stable in water due to electrical double layer around the particles, controlled by the ionic concentration. A temperature gradient throughout the ferrofluid sample causes the thermodiffusion (Soret effect) of dispersed particles and ions. This effect is the movement of particles to the cold or hot side of the temperature gradient. The particles migration for a given side depends on the characteristics of the sample. The Soret effect of ferrofluids in acidic and basic solutions is described by the experimental measurements of the physical parameters associated to particles diffusion. The Soret coefficient ST and the mass diffusion coefficient are measured in the matter lens experiment in the Z-scan experimental setup, and by the use of Thermal Diffusion Forced Rayleigh Scattering experiments. Concerning the ionic response to the temperature gradient the thermoelectric field generated by charges diffusion is measured in a thermoelectric cell. The surface potential of the particles is also measured to describe its interactions with the thermoelectric field. These experiments are made as function of the temperature of the sample and the results are applied to describe the ST(T) of particles by the use of equations from the main theoretical models. The results show differences and resemblances of the Soret effect in acidic and basic nanoparticles solutions. In both kind of solutions the thermodiffusion of nanoparticles is mainly ruled by the thermodiffusion of ions dispersed in solution.

Esta dissertação apresenta um estudo experimental sobre o transporte de massa de nanopartículas magnéticas induzido por um gradiente de temperatura, denominado termodifusão. A técnica de Varredura-Z é utilizada para gerar o aumento de temperatura na região irradiada pelo laser Gaussiano e formar o gradiente de temperatura. A sequente migração de nanopartículas é caracterizada pelo gradiente de concentração gerado no estado estacionário do fluxo de partículas, definindo o coeficiente Soret ST. O objetivo deste trabalho é verificar a variação de ST com o tamanho médio d0 das nanopartículas de ferrofluidos eletrostaticamente carregados em solução ácida. A dependência de ST com d0 surge do coeficiente de difusão de massa, explicando a dependência linear encontrada experimentalmente. Nestes materiais, a migração de nanopartículas ocorre para a região quente da amostra. Mostramos que este comportamento ocorre pela diminuição da carga superficial da nanopartícula na parte mais quente da amostra, diminuindo a repulsão eletrostática. A influência dos íons presentes na solução é obtida através da mudança na amplitude de ST com a diminuição do pH na amostra. Uma previsão teórica, baseada na eletrostática da dupla camada elétrica, concorda com estes dados considerando alta blindagem eletrostática das nanopartículas e a diminuição da carga superficial com o aumento da temperatura. / This dissertation presents an experimental study about the mass transport of magnetic nanoparticles induced by a temperature gradient, called thermodiffusion. The Z-scan technique is used to generate the temperature increasing in the region irradiated by the Gaussian laser beam and create the temperature gradient. The following nanoparticles migration is characterized by the concentration gradient of the stationary particles flux, defining the Soret coefficient ST. The aim of this work is to obtain the variation of ST with the average size d0 of electrostatically charged ferrofluid nanoparticles in acidic solution. The ST dependence with d0 comes from the mass diffusion coefficient, in agreement with the linear dependence found experimentally. In these materials the nanoparticles migration occurs to the hot region of the sample. We show that this behavior is owing to the reduction of the nanoparticle´s surface charge in the hottest region of the sample, decreasing electrostatic repulsion. The influence of the ions from solution is obtained through the change in ST amplitude with reduction of the samples pH. A theoretical prediction, based in the electrostatic of the double layer, agrees with this data considering a high screening of the nanoparticles and decreasing of the surface charge with temperature increasing.

A fundamental step in the further developments of comprehensive modelling of the diffusive processes in liquids requires the possibility of obtaining reliable and accurate experimental data of the diffusion and thermodiffusion coefficients of multicomponent liquid systems. In the present work, we perform an experimental investigation of the diffusive properties of binary and ternary liquid systems. Two experimental techniques, the ‘Open Ended Capillary’ technique and the ‘Transient Interferometric Technique’ have been developed. Those techniques have been used for the experimental characterization of several systems composed of 1,2, 3,4-Tetrahydrnaphtalene, Isobutylbenzene and Dodecane at ambient temperature. Those particular species were selected as a simplified multicomponent system modelling the fluids contained in natural crude oils reservoirs. <p>For each of these techniques, experimental set-ups were designed, implemented and calibrated. The procedures for identifying the ternary diffusion coefficients from the measured compositions fields were studied in details. <p>The Open Ended Capillary Technique was applied under gravity condition to study isothermal diffusion binary and ternary systems. Difficulties related to a new procedure for interpreting the data collected at short times of the experiments are highlighted and its implication in the generalization of the technique for the study of multicomponent systems is discussed.<p>The Transient Interferometric Technique was used to perform an experimental study of three binary systems under gravity conditions. It was also applied for the investigation of ternary systems under microgravity condition in the frame of the DSC on SODI experiment, which took place aboard the International Space Station in 2011. The experimental results are reported and the analysis of the accuracy of the technique is presented. The TIT is the first technique ever providing accurate experimental measurements of the complete set of diffusion and thermodiffusion coefficients for ternary liquid systems.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

Les dispersions de nanoparticules magnétiques (NPs) dans les solvants polaires sont utilisées dans de nombreuses applications dans des domaines variés, du biomédical à l'environnement ou à l'énergie. Aussi appelés ferrofluides (FFs), ces systèmes sont des dispersions de ferrites spinelle magnétiques pouvant être stabilisées par des répulsions électrostatiques. Cela nécessite une bonne compréhension de l'interface NPs/solvant porteur, qui contrôle les interactions entre NPs, la nanostructure et de nombreuses autres propriétés. Nous étudions ici en milieu aqueux la réactivité électrochimique de particules c¿ur/couronne de type MFe2O4@ Fe2O3 (M = Fe,Co,Mn,Cu,Zn), espèces électroactives non conventionnelles. La voltammétrie à signaux carrés et la coulométrie à potentiel contrôlé permettent d'étudier la coquille de maghémite ( Fe2O3), dont le rôle est la protection de l'oxyde mixte du c¿ur en milieu acide. D'autre part, un nouveau procédé d'élaboration de dispersions dans les solvants polaires, testé dans l'eau, est appliqué au diméthylsulfoxide (DMSO). A partir du point de charge nulle des NPs, un ajout connu d'acide ou de base permet de contrôler la charge des NPs, la nature des contreions et la quantité d'électrolyte libre. Des dispersions stabilisées par des répulsions électrostatiques sont obtenues dans le DMSO. La diffusion de rayons X aux petits angles et la diffusion dynamique de la lumière sont utilisées pour comprendre la nanostructure et quantifier les interactions entre particules. De forts effets spécifiques liés aux ions sont mis en évidence ainsi que le rôle de l'interface solide liquide, en particulier sur les propriétés de thermodiffusion. / Dispersions of magnetic nanoparticles (NPs) in polar solvents have been inspiring many applications, to cite a few, biomedical, industrial and thermoelectrical ones. Also called ferrofluids (FFs), they are usually colloidal dispersions of magnetic spinel ferrite NPs, which can be stabilized thanks to electrostatic repulsion. A good understanding of the interface between NPs and the carrier solvent is thus a key point, which governs the interparticle interactions, the nanostructure and many other applicative properties. We study here the electrochemical reactivity of core-shell ferrite MFe2O4@ Fe2O3 (M=Fe,Co,Mn,Cu,Zn) NPs in aqueous medium. Square-wave voltammetry and potential controlled coulometry techniques are used on these non-conventional electroactive systems in order to evidence the shell of maghemite ( Fe2O3), the main function of which is to ensure the thermodynamical stability of NPs in acidic medium. We also present a new process for the elaboration of maghemite based FF in polar solvents, tested in water and applied to dimethyl sulfoxide (DMSO). Departing from the point of zero charge, the NPs are charged in a controlled way by adding acid or base, which enables us to better control the charge and the counter-ions nature, as well as the amount of free electrolyte in the dispersion. Stable dispersions are obtained thanks to electrostatic repulsion, also in DMSO. Small Angle X-ray scattering and Dynamic Light Scattering are used to understand the nanostructure and quantify the interparticle interactions. Specific ionic effects are evidenced as well as the strong influence of the solid/liquid interface on the migration of the NPs in a thermal gradient.

Les conséquences liées à la présence de gradients thermiques sur le transfert de matière en milieu poreux sont encore aujourd’hui mal appréhendées, essentiellement en raison de la complexité induite par la présence de phénomènes couplés (thermodiffusion ou effet Soret). Le but de cette thèse est d’étudier et de comprendre l’influence que peut avoir un gradient thermique sur l’écoulement d’un mélange. L’objectif principal est de déterminer les coefficients effectifs modélisant les transferts de chaleur et de matière en milieux poreux, et en particulier le coefficient de thermodiffusion effectif. En utilisant la technique de changement d’échelle par prise de moyenne volumique nous avons développé un modèle macroscopique de dispersion incluant la thermodiffusion. Nous avons étudié en particulier l'influence du nombre de Péclet et de la conductivité thermique sur la thermodiffusion. Les résultats ont montré que pour de faibles nombres de Péclet, le nombre de Soret effectif en milieu poreux est le même que dans un milieu libre, et ne dépend pas du ratio de la conductivité thermique (solide/liquide). À l'inverse, en régime convectif, le nombre de Soret effectif diminue. Dans ce cas, un changement du ratio de conductivité changera le coefficient de thermodiffusion effectif. Les résultats théoriques ont montré également que, lors de la diffusion pure, même si la conductivité thermique effective dépend de la connectivité de la phase solide, le coefficient effectif de thermodiffusion est toujours constant et indépendant de la connectivité de la phase solide. Le modèle macroscopique obtenu par cette méthode est validé par comparaison avec des simulations numériques directes à l'échelle des pores. Un bon accord est observé entre les prédictions théoriques provenant de l'étude à l’échelle macroscopique et des simulations numériques au niveau de l’échelle de pores. Ceci démontre la validité du modèle théorique proposé. Pour vérifier et consolider ces résultats, un dispositif expérimental a été réalisé pour mesurer les coefficients de transfert en milieu libre et en milieu poreux. Dans cette partie, les nouveaux résultats expérimentaux sont obtenus avec un système du type « Two-Bulb apparatus ». La diffusion et la thermodiffusion des systèmes binaire hélium-azote et hélium-dioxide de carbone, à travers des échantillons cylindriques remplis de billes de différents diamètres et propriétés thermiques, sont mesurées à la pression atmosphérique. La porosité de chaque milieu a été déterminée par la construction d'une image 3D de l'échantillon par tomographie. Les concentrations sont déterminées par l'analyse en continu de la composition du mélange de gaz dans les ampoules à l’aide d’un catharomètre. La détermination des coefficients de diffusion et de thermodiffusion est réalisée par confrontation des relevés temporels des concentrations avec une solution analytique modélisant le transfert de matière entre deux ampoules. Les résultats sont en accord avec les résultats théoriques. Cela permet de conforter l’influence de la porosité des milieux poreux sur les mécanismes de diffusion et de thermodiffusion. / A multicomponent system, under nonisothermal condition, shows mass transfer with cross effects described by the thermodynamics of irreversible processes. The flow dynamics and convective patterns in mixtures are more complex than those of one-component fluids due to interplay between advection and mixing, solute diffusion, and thermal diffusion (or Soret effect). This can modify species concentrations of fluids crossing through a porous medium and leads to local accumulations. There are many important processes in nature and industry where thermal diffusion plays a crucial role. Thermal diffusion has various technical applications, such as isotope separation in liquid and gaseous mixtures, identification and separation of crude oil components, coating of metallic parts, etc. In porous media, the direct resolution of the convection-diffusion equations are practically impossible due to the complexity of the geometry; therefore the equations describing average concentrations, temperatures and velocities must be developed. They might be obtained using an up-scaling method, in which the complicated local situation (transport of energy by convection and diffusion at pore scale) is described at the macroscopic scale. At this level, heat and mass transfers can be characterized by effective tensors. The aim of this thesis is to study and understand the influence that can have a temperature gradient on the flow of a mixture. The main objective is to determine the effective coefficients modelling the heat and mass transfer in porous media, in particular the effective coefficient of thermodiffusion. To achieve this objective, we have used the volume averaging method to obtain the modelling equations that describes diffusion and thermodiffusion processes in a homogeneous porous medium. These results allow characterising the modifications induced by the thermodiffusion on mass transfer and the influence of the porous matrix properties on the thermodiffusion process. The obtained results show that the values of these coefficients in porous media are completely different from the one of the fluid mixture, and should be measured in realistic conditions, or evaluated with the theoretical technique developed in this study. Particularly, for low Péclet number (diffusive regime) the ratios of effective diffusion and thermodiffusion to their molecular coefficients are almost constant and equal to the inverse of the tortuosity coefficient of the porous matrix, while the effective thermal conductivity is varying by changing the solid conductivity. In the opposite, for high Péclet numbers (convective regime), the above mentioned ratios increase following a power law trend, and the effective thermodiffusion coefficient decreases. In this case, changing the solid thermal conductivity also changes the value of the effective thermodiffusion and thermal conductivity coefficients. Theoretical results showed also that, for pure diffusion, even if the effective thermal conductivity depends on the particle-particle contact, the effective thermal diffusion coefficient is always constant and independent of the connectivity of the solid phase. In order to validate the theory developed by the up-scaling technique, we have compared the results obtained from the homogenised model with a direct numerical simulation at the microscopic scale. These two problems have been solved using COMSOL Multiphysics, a commercial finite elements code. The results of comparison for different parameters show an excellent agreement between theoretical and numerical models. In all cases, the structure of the porous medium and the dynamics of the fluid have to be taken into account for the characterization of the mass transfer due to thermodiffusion. This is of great importance in the concentration evaluation in the porous medium, like in oil reservoirs, problems of pollution storages and soil pollution transport. Then to consolidate these theoretical results, new experimental results have been obtained with a two-bulb apparatus are presented. The diffusion and thermal diffusion of a helium-nitrogen and helium-carbon dioxide systems through cylindrical samples filled with spheres of different diameters and thermal properties have been measured at the atmospheric pressure. The porosity of each medium has been determined by construction of a 3D image of the sample made with an X-ray tomograph device. Concentrations are determined by a continuous analysing the gas mixture composition in the bulbs with a katharometer device. A transient-state method for coupled evaluation of thermal diffusion and Fick coefficients in two bulbs system has been proposed. The determination of diffusion and thermal diffusion coefficients is done by comparing the temporal experimental results with an analytical solution modelling the mass transfer between two bulbs. The results are in good agreement with theoretical results and emphasize the porosity of the medium influence on both diffusion and thermal diffusion process. The results also showed that the effective thermal diffusion coefficients are independent from thermal conductivity ratio and particle-particle touching.

Des questions fondamentales concernant les propriétés de diffusion des systèmes biologiques dans des conditions isothermes et non-isothermes restent en suspens en raison de l’absence de techniques expérimentales capables de visualiser et de mesurer les phénomènes de diffusion avec une très bonne précision. Il existe en conséquence un besoin de développer de nouvelles techniques expérimentales permettant d’approfondir notre compréhension des phénomènes de diffusion. La convection naturelle en cavité tridimensionnelle inclinée est elle-aussi très peu étudiée. Cette inclinaison de la cavité peut correspondre à un léger défaut expérimental ou être imposée volontairement. Dans cette thèse, nous étudions les phénomènes de transport de chaleur et de masse en cavité parallélépipédique, nous intéressant particulièrement à la thermodiffusion en situation sans convection et à la convection naturelle en fluide pur (sans thermodiffusion). La diffusion de masse est étudiée à l’aide d’une nouvelle technique optique, tandis que la convection naturelle est tout d’abord étudiée en détails avec une méthode numérique sophistiquée, puis visualisée expérimentalement à l’aide du même système optique que pour les mesures de diffusion. Nous présentons l’interféromètre optique de haute précision développé pour les mesures de diffusion. Cet interféromètre comprend un interféromètre polarisé de Mach–Zehnder, un polariseur tournant, une caméra CCD et un algorithme de traitement d’images original. Nous proposons aussi une méthode pour déterminer le coefficient de diffusion isotherme en fonction de la concentration. Cette méthode, basée sur une analyse inverse couplée à un calcul numérique, permet de déterminer les coefficients de diffusion à partir des profils de concentration transitoires obtenus par le système optique. Mentionnons de plus que c’est la première fois que la thermodiffusion est visualisée dans des solutions aqueuses de protéines. La méthode optique proposée présente trois avantages principaux par rapport aux autres méthodes similaires : (i) un volume d’échantillon réduit, (ii) un temps de mesure court, (iii) une stabilité hydrodynamique améliorée. Toutes ces méthodes ont été validées par des mesures sur des systèmes de référence. La technique optique est d’abord utilisée pour étudier la diffusion isotherme dans des solutions de protéines : (a) dans des solutions binaires diluées, (b) dans des solutions binaires sur un large domaine de concentration, (c) dans des solutions ternaires diluées. Les résultats montrent que (a) le coefficient de diffusion isotherme dans les systèmes dilués décroit avec la masse moléculaire, comme prédit grossièrement par l’équation de Stokes-Einstein ; (b) la protéine BSA a un comportement diffusif de type sphère dure et la protéine lysozyme de type sphère molle ; (c) l’effet de diffusion croisée est négligeable dans les systèmes ternaires dilués. La technique optique est aussi utilisée (d) dans des solutions binaires diluées non-isothermes, révélant que les molécules d’aprotinin (6.5 kDa) et de lysozyme (14.3 kDa) sont, respectivement, thermophiliques et thermo-phobiques, quand elles sont en solutions aqueuses à température ambiante. Enfin, la technique optique est utilisée pour l’étude de la convection de Rayleigh-Bénard en cavité cubique horizontale. Puisque la convection peut aussi être étudiée de façon réaliste en utilisant les équations de Navier-Stokes, une analyse numérique de bifurcation est proposée, permettant une étude approfondie de la convection naturelle dans des cavités tridimensionnelles parallélépipédiques. Pour cela, une méthode de continuation a été développée à partir d’un code aux éléments finis spectraux. La méthode numérique proposée est particulièrement bien adaptée aux études de convection correspondant à des diagrammes de bifurcation complexes. [...] / Fundamental questions concerning the mass diffusion properties of biological systems under isothermal and non-isothermal conditions still remain due to the lack of experimental techniques capable of visualizing and measuring mass diffusion phenomena with a high accuracy. As a consequence, there is a need to develop new experimental techniques that can deepen our understanding of mass diffusion. Moreover, steady natural convection in a tilted three-dimensional rectangular enclosure has not yet been studied. This tilt can be a slight defect of the experimental device or can be imposed on purpose. In this dissertation, heat and mass transfer phenomena in parallelepiped enclosures are studied focusing on convectionless thermodiffusion and on natural convection of pure fluids (without thermodiffusion). Mass diffusion is studied with a novel optical technique, while steady natural convection is first studied in detail with an improved numerical analysis and then with the same optical technique initially developed for diffusion measurements. A construction of a precise optical interferometer to visualize and measure mass diffusion is described. The interferometer comprises a polarizing Mach–Zehnder interferometer, a rotating polariser, a CCD camera, and an original image-processing algorithm. A method to determine the isothermal diffusion coefficient as a function of concentration is proposed. This method uses an inverse analysis coupled with a numerical calculation in order to determine the diffusion coefficients from the transient concentration profiles measured with the optical system. Furthermore, thermodiffusion of protein molecules is visualized for the first time. The proposed method has three main advantages in comparison to similar methods: (i) reduced volume sample, (ii) short measurement time, and (iii) increased hydrodynamic stability of the system. These methods are validated by determining the thermophysical properties of benchmark solutions. The optical technique is first applied to study isothermal diffusion of protein solutions in: (a) dilute binary solutions, (b) binary solutions with a wide concentration range, and (c) dilute ternary solutions. The results show that (a) the isothermal diffusion coefficient in dilute systems decreases with molecular mass, as roughly predicted by the Stokes-Einstein equation; (b) BSA protein has a hard-sphere-like diffusion behaviour and lysozyme protein a soft sphere characteristic; and (c) the cross-term effect between the diffusion species in a dilute ternary system is negligible. The optical technique is then applied to (d) non-isothermal dilute binary solutions, revealing that that the aprotinin (6.5 kDa) and lysozyme (14.3 kDa) molecules are thermophilic and thermophobic, respectively, when using water as solvent at room temperature. Finally, the optical technique is applied to study Rayleigh-Bénard convection in a horizontal cubical cavity. Since natural convection can be studied in more depth by solving the Navier-Stokes equations, a bifurcation analysis is proposed to conduct a thorough study of natural convection in three-dimensional parallelepiped cavities. Here, a continuation method is developed from a three-dimensional spectral finite element code. The proposed numerical method is particularly well suited for the studies involving complex bifurcation diagrams of three-dimensional convection in rectangular parallelepiped cavities. This continuation method allows the calculation of solution branches, the stability analysis of the solutions along these branches, the detection and precise direct calculation of the bifurcation points, and the jump to newly detected stable or unstable branches, all this being managed by a simple continuation algorithm. This can be used to calculate the bifurcation diagrams describing the convection in tilted cavities. [...]

Cette thèse porte sur le mouvement de particules colloïdales induit par l’effet thermoélectrique (ou effet Seebeck). Dans un électrolyte soumis à un gradient de température, les ions ont tendance à migrer à des vitesse qui différent d'une espèce à l'autre. On observe alors une accumulation de charge aux bords de l’échantillon. Ce déséquilibre induit un champ électrique qui agit sur les colloïdes chargés présents dans la solution. Cette contribution électrophorétique dans le champ de Seebeck s'additionne à la contribution directe de thermodiffusion. Comme résultat principal,nous obtenons la vitesse phorétique en fonction de la fraction volumique des particules et, dans le cas de polyélectrolytes, du poids moléculaire. Dans la seconde partie, nous étudions l’effet thermoélectrique pour une particule chauffée par absorption d’un faisceau laser. Le gradient de température est alors radial et l’effet Seebeck induit une charge nette dans le voisinage de la particule. Enfin, nous discutons les applications possibles de ce phénomène de thermocharge / In this work we study the motion induced in a colloidal dispersion by thethermoelectric or Seebeck effect. As its basic principle, the ions of the electrolytesolution start moving in a temperature gradient. In general, the velocity of one iondiffers from another. As a result, one observes a charge separation and a macroscopicelectric field. This thermoelectric field, in turn, acts upon the charged colloidalparticle present in the solution. Thus thermophoresis of the particle comprises of anelectrophoretic motion in the thermoelectric or Seebeck field. As an important result,we derive how the corresponding velocity of a colloidal particle depends upon thecolloidal volume fraction or on molecular weight for polymers. In a second part, westudy the thermoelectric effect due to a hot colloidal particle where a radialtemperature gradient is produced by the particle itself. In this temperature gradientthe same Seebeck effect takes place in the electrolyte solution. We find that the hotparticle carries a significant amount of charge around it. Whereas the amount ofsurface charges present at the boundaries of the sample container in the onedimensionalcase is rather insignificant. Possible applications of this thermochargingphenomenon are also discussed.

Made available in DSpace on 2014-07-29T15:07:09Z (GMT). No. of bitstreams: 1 Dissertacao Harley Fernandes Rodrigues.pdf: 5566711 bytes, checksum: 484423a034c8d6a3a3f34650b5036af1 (MD5) Previous issue date: 2011-08-23 / In this work we developed a Dip Coating method that could control the temperature gradient between a substrate and the material that one wants to adsorb at its surface. In particular, the adsorption of biocompatible magnetic nanoparticles at the surface of bare metal Stents, under different experimental conditions, was investigated. The magnetic nanoparticles consisted of magnetite coated with tripoliphosphate (mean diameter 7.68 nm and standard deviation 1.88 nm) dispersed in water at physiological conditions, while the Stent was a CoCr based-one (Cronus stent from Scitech with 16 mm length). Nine series of experiments were performed where it was controlled parameters as: time of adsorption, stent temperature and magnetic fluid temperature. The stents coated with nanoparticles were magnetically characterized using a vibrating sample magnetometer (VSM), which allowed us to determine the number of nanoparticles at the stent surface. The increase of the magnetic moment of the stent with the increase of the adsorption time was theoretically modeled, with an excellent experimental agreement, as a transient diffusion process of nanoparticles at the interface stent-magnetic fluid, which clearly indicates an important diffusive contribution. Strong evidences of thermal diffusion (Soret effect), i.e. nanoparticle diffusion due to temperature gradient between the stent and the magnetic fluid, were shown, suggesting the possibility of nanostructures vectorization through thermal induced mechanisms. The spatial distribution of nanoparticles at the surface of the stent was investigated by Scanning Electron Microscopy (SEM) and X-ray Spectroscopy by Dispersive Energy (EDS). Measurements of the compositional mapping and images of SEM revealed that the nanoparticles are not homogeneously distributed, being concentrated at the edges of the stents for the experimental conditions investigated in this work. As the VSM data, the EDS of the stents revealed an increase of the quantity of adsorbed magnetic nanoparticles at the surface with the increase of the adsorption time. The same theoretical model, know considering the amount of 26Fe in the chemical composition of the coated stent, was able to explain the experimental data. Finally, a comparison was made, using the compositional mapping study of the coated stents, between the Dip Coating and the Spray technique. The later showed a more homogeneous distribution of nanoparticles at the surface of the stent, suggesting that this technique is more adequate on the development of a biomedical nanoproduct for clinical tests. / Neste trabalho foi desenvolvida uma técnica de Dip Coating (deposição por via líquida) que permite controlar o gradiente de temperatura entre o substrato e o material que se quer depositar em sua superfície. Em particular, foi investigado o efeito de adsorção de nanopartículas magnéticas biocompatíveis na superfície de Stents nus em diversas condições experimentais. As nanopartículas magnéticas consistiam de magnetita recobertas com tripolifosfato (diâmetro médio ) dispersas em água em pH fisiológico, enquanto as endopróteses eram Stents de CoCr (Stent Cronus da empresa Scitech com 16mm). Ao todo foram realizadas 9 séries de experimentos onde controlou-se parâmetros como: tempo de adsorção, temperatura do Stent e temperatura do fluido magnético. Os Stents recobertos com nanopartículas foram então caracterizados magneticamente pela técnica de magnetometria de amostra vibrante (VSM Vibrating Sample Magnetometer ), que permitiu determinar o número de nanopartículas magnéticas adsorvidas na superfície da endoprótese. O aumento do momento magnético do Stent com o aumento do tempo de adsorção foi modelado teoricamente, com grande concordância experimental, como um processo de difusão transiente de nanopartículas na interface Stent-fluido magnético, evidenciando a forte contribuição difusiva. Fortes evidências de efeitos termodifusivos (efeito de Soret), ou seja mecanismos de difusão mássica de nanopartículas devido ao gradiente de temperatura entre Stent e FM, foram apresentados, sugerindo a possibilidade de vetorização de nanoestruturas por meio de fenômenos termoinduzidos. A distribuição das nanopartículas na superfície dos Stents foi investigada por medidas de Microscopia Eletrônica de Varredura (MEV) e espectroscopia de raios-X por energia dispersiva (EDS). As medidas de mapeamento composicional e imagens de MEV revelaram que as nanopartículas estão distribuídas de maneira não homogênea, estando concentradas nas bordas dos Stents para as condições experimentais utilizadas neste trabalho. Assim como os dados de MAV, o EDS dos Stents recobertos revelou um aumento da quantidade de nanopartículas magnéticas adsorvidas em sua superfície com o aumento do tempo de adsorção. O mesmo modelo teórico, agora considerando o percentual de 26Fe na composição química do revestimento, foi capaz de explicar os dados experimentais. Finalmente, foi feita uma comparação, por meio do mapeamento composicional de Stents recobertos, entre as técnicas de Dip Coating e Spray. Esta última apresentou uma distribuição de nanopartículas mais homogênea na superfície da endoprótese, sugerindo que possa ser mais adequada para a confecção de um nanoproduto médico voltado a testes clínicos.

Ce travail porte sur l'étude de la thermodiffusion, ou effet Soret, par simulation numérique à l'échelle microscopique. Ce processus de transport croisé couple flux de masse et gradient thermique et est encore largement incompris. Pour cette étude, nous avons appliqué un algorithme de dynamique moléculaire hors équilibre à des mélanges de sphères de Lennard-Jones libres ou confinées. Après avoir testé la validité de nos simulations, nous avons montré que les résultats obtenus permettaient d'estimer la thermodiffusion dans ces fluides modèles à partir de corrélations simples sur les paramètres moléculaires. Cette démarche a été également validée sur des mélanges ternaires. Par ailleurs, les résultats de l'influence du milieu poreux sur la thermodiffusion ont montré la prépondérance des effets d'adsorption sur ceux liés au confinement. Cette influence restant faible dans la majorité des cas, exceptée pour les pores les plus fins et les plus attractifs.