The C2X Communication is of high interest to the automotive industry. Ongoing research on this topic mainly bases on the simulation of Vehicular Ad Hoc Networks. In order to estimate the necessary level of simulation details their impact on the results needs to be examined. This thesis focuses on different channel models as the freespace, shadowing, and Ricean model, along with varying parameters. For these simulations the network simulator ns-2 is extended to provide IEEE 802.11p compliance. However, the WAVE mode is not considered since it is still under development and not finally approved. Besides a more sophisticated packet error model than the existing implementation, as well as a link adaptation algorithm, is added. In this thesis several simulations examine specific details of wireless communication systems such as fairness of multiple access, interferences, throughput, and variability. Furthermore, the simulation points out some unexpected phenomena as starving nodes and saturation effects in multi hop networks. Those led to the conclusion that the IEEE 802.11 draft amendment does not solve known problems of the original IEEE 802.11 standard.

Emerging technologies such as Bluetooth and 802.11b (Wi-Fi) have fuelled the growth of the short-range communication industry. Bluetooth, the leading WPAN (wireless personal area network) technology, was designed primarily for cable replacement applications. The first generation Bluetooth products are focused on providing low-cost radio connections among personal electronic devices. In the WLAN (wireless local area network) arena, Wi-Fi appears to be the superior product. Wi-Fi is designed for high speed internet access, with higher radio power and longer distances. Both technologies use the same 2.4GHz ISM band. The differences between Bluetooth and Wi-Fi standard features lead to a natural partitioning of applications. Nowadays, many electronics devices such as laptops and PDAs, support both Bluetooth and Wi-Fi standards to cover a wider range of applications. The cost of supporting both standards, however, is a major concern. Therefore, a dual-mode transceiver is essential to keep the size and cost of such system transceivers at a minimum. A fully integrated low-IF Bluetooth receiver is designed and implemented in a low cost, main stream 0.35um CMOS technology. The system includes the RF front end, frequency synthesizer and baseband blocks. It has -82dBm sensitivity and draws 65mA current. This project involved 6 Ph.D. students and I was in charge of the design of the channel selection complex filter is designed. In the Bluetooth transmitter, a frequency modulator with fine frequency steps is needed to generate the GFSK signal that has +/-160kHz frequency deviation. A low power ROM-less direct digital frequency synthesizer (DDFS) is designed to implement the frequency modulation. The DDFS can be used for any frequency or phase modulation communication systems that require fast frequency switching with fine frequency steps. Another contribution is the implementation of a dual-mode 802.11b/Bluetooth receiver in IBM 0.25um BiCMOS process. Direct-conversion architecture was used for both standards to achieve maximum level of integration and block sharing. I was honored to lead the efforts of 7 Ph.D. students in this project. I was responsible for system level design as well as the design of the variable gain amplifier. The receiver chip consumes 45.6/41.3mA and the sensitivity is -86/-91dBm.

Indoor Positioning Systems (IPS) using the existing WLAN have won growing interest in the last years, it can be a perfect supplement to provide location information of users in indoor environments where other positioning techniques such as GPS, are not much effective. The thesis manuscript proposes a new approach to define a WLAN-based indoor positioning system (WLAN-IPS) as a combinatorial optimization problem to guarantee the requested communication quality while optimizing the positioning error. This approach is characterised by several difficult issues we tackled in three steps.At first, we designed a WLAN-IPS and implemented it as a test framework. Using this framework, we looked at the system performance under various experimental constraints. Through these experiments, we went as far as possible in analysing the relationships between the positioning error and the external environmental factors. These relationships were considered as evaluation indicators of the positioning error. Secondly, we proposed a model that defines all major parameters met in the WLAN-IPS from the literature. As the original purpose of the WLAN infrastructures is to provide radio communication access, we introduced an additional purpose which is to minimize the location error within IPS context. Two main indicators were defined in order to evaluate the network Quality of Service (QoS) and the positioning error for Location-Based Service (LBS). Thirdly, after defining the mathematical formulation of the optimisation problem and the key performance indicators, we proposed a mono-objective algorithm and a multi-objective algorithm which are based on Tabu Search metaheuristic to provide good solutions within a reasonable amount of time. The simulations demonstrate that these two algorithms are highly efficient for the indoor positioning optimization problem.

Increasing number of ageing population and people who need continuous health monitoring and rising the costs of health care have triggered the concept of the novel wireless technology-driven human body monitoring. Human body monitoring can be performed using a network of small and intelligent wireless medical sensors which may be attached to the body surface or implanted into the tissues. It enables carers to predict, diagnose, and react to adverse events earlier than ever. The concept of Wireless Body Area Network (WBAN) was introduced to fully exploit the benefits of wireless technologies in telemedicine and m-health. The main focus of this research is the design and performance evaluation of strategies and architectures that would allow seamless and efficient interconnection of patient’s body area network and the stationary (e.g., hospital room or ward) wireless networks. I first introduce the architecture of a healthcare system which bridges WBANs and Wireless Local Area Networks (WLANs). I adopt IEEE 802.15.6 standard for the patient’s body network because it is specifically designed for WBANs. Since IEEE 802.15.6 has strict Quality of Service (QoS) and priorities to transfer the medical data to the medical server a QoS-enabled WLAN for the next hop is needed to preserve the end-to-end QoS. IEEE 802.11e standard is selected for the WLAN in the hospital room or ward because it provides prioritization for the stations in the network. I investigate in detail the requirements posed by different healthcare parameters and to analyze the performance of various alternative interconnection strategies, using the rigorous mathematical apparatus of Queuing Theory and Probabilistic Analysis; these results are independently validated through discrete event simulation models. This thesis has three main parts; performance evaluation and MAC parameters settings of IEEE 802.11e Enhanced Distributed Channel Access (EDCA), performance evaluation and tuning the MAC parameters of IEEE 802.15.6, and designing a seamless and efficient interconnection strategy which bridges IEEE 802.11e EDCA and IEEE 802.15.6 standards for a healthcare system.

Innomhuspositioneringssystem kan med fördel användas i många olika tillämpningar, allt från sjukhus till shoppingcenter. Denna rapport behandlar olika tekniker och lösningar för att designa ett positioneringssystem. Rapporten tar även upp i detalj hur ett system kan konstrueras av ZigBee kombinerat med dödräkning.

Increasing number of ageing population and people who need continuous health monitoring and rising the costs of health care have triggered the concept of the novel wireless technology-driven human body monitoring. Human body monitoring can be performed using a network of small and intelligent wireless medical sensors which may be attached to the body surface or implanted into the tissues. It enables carers to predict, diagnose, and react to adverse events earlier than ever. The concept of Wireless Body Area Network (WBAN) was introduced to fully exploit the benefits of wireless technologies in telemedicine and m-health. The main focus of this research is the design and performance evaluation of strategies and architectures that would allow seamless and efficient interconnection of patient’s body area network and the stationary (e.g., hospital room or ward) wireless networks. I first introduce the architecture of a healthcare system which bridges WBANs and Wireless Local Area Networks (WLANs). I adopt IEEE 802.15.6 standard for the patient’s body network because it is specifically designed for WBANs. Since IEEE 802.15.6 has strict Quality of Service (QoS) and priorities to transfer the medical data to the medical server a QoS-enabled WLAN for the next hop is needed to preserve the end-to-end QoS. IEEE 802.11e standard is selected for the WLAN in the hospital room or ward because it provides prioritization for the stations in the network. I investigate in detail the requirements posed by different healthcare parameters and to analyze the performance of various alternative interconnection strategies, using the rigorous mathematical apparatus of Queuing Theory and Probabilistic Analysis; these results are independently validated through discrete event simulation models. This thesis has three main parts; performance evaluation and MAC parameters settings of IEEE 802.11e Enhanced Distributed Channel Access (EDCA), performance evaluation and tuning the MAC parameters of IEEE 802.15.6, and designing a seamless and efficient interconnection strategy which bridges IEEE 802.11e EDCA and IEEE 802.15.6 standards for a healthcare system.

Ubiquitous location-aware systems and services are becoming a reality as made evident by the widely known Global Position System (GPS). However, indoor location-aware sensing systems are not yet commercially viable since: (i) for a GPS-based system, the signals attenuate and can multipath indoors causing weak signal and poor location (ii) for a Radiolocation-based system, the propagation of radio signals are complex and difficult to model. In this paper, we present RadLoco, a location-sensing system that uses IEEE 802.11 Wireless LAN survey techniques to create a radio Received Signal Strength (RSS) map of the propagation environment. To provide accurate location estimation, we make use of a kernel-window estimation algorithm that is used to approximate the probability density function of RSS measurement and location. Unlike parametric estimators, this non-parametric kernel approach requires less knowledge of the distributions of location and measurements, and also makes use of the prior knowledge of mobile terminal location to reduce the estimation error. The novelty of the system is an innovative radio/ultrasonic sensory network which allows for rapid data collection whereas the standard technique of defining a grid of survey points with measuring rulers, chalk, and tape would require a great amount of manpower. Using this sensory network, a 2000m sq. office building is surveyed in four hours by a single technician. Our experimental results indicate the mobile terminal is located on the correct oor with over 98% accuracy and with a mean error of less than 2.5m from the true location.

Ortsbasierte Dienste erfreuen sich in den letzten Jahren starker Beliebtheit. Für deren Umsetzung sind sog. Lokalisierungsdienste notwendig, welche eine Ortung von Mobilgeräten erlauben. Das GPS stellt den wohl populärsten Lokalisierungsdienst dar, ist jedoch innerhalb von Gebäuden nur sehr beschränkt einsetzbar. In der Vergangenheit wurden deshalb Methoden vorgeschlagen, die zur Positionsbestimmung auf die Messung der Empfangsfeldstärke von WLAN-Aussendungen zurückgreifen. Im Rahmen der Diplomarbeit soll untersucht werden, ob sich ebenfalls eine Postionsbestimmung anhand von Laufzeiten der WLAN-Signale umsetzen lässt. Bedingung hierbei ist, dass der Lokalisierungsdienst - eine reine Softwarelösung darstellt und keine Modifikationen an Hard- oder Firmware voraussetzt und - die Lokalisierung ohne für diese Zwecke ausgelegte Spezialhardware umsetzbar ist. Diese Anforderungen sollen sicherstellen, dass der zu entwickelnde Lokalisierungsdienst mit bereits installierter, handelsübliche Hardware umsetzbar ist. Es sind in Frage kommende Verfahren zur Bestimmung der Signallaufzeit zu erörtern. Für die Laufzeitmessung in Frage kommenden Zeitquellen sollen zugänglich gemacht und auf ihre Tauglichkeit untersucht werden. Durch Messreihen ist zu untersuchen, ob mit den vorgeschlagenen Messverfahren eine Lokalisierung möglich ist und in welchem Rahmen sich die zu erwartende Genauigkeit bewegt. Die in dieser Arbeit beschriebenen Konzepte sollen im Rahmen einer Proof of Concept Anwendung implementiert werden. Die Software soll unter dem Gesichtspunkt der Wiederverwendbarkeit entwickelt werden, um eine spätere Nutzung im Rahmen anderer Projekte zu ermöglichen.

Transmission of medical images, that mandate lossless transmission of content over WLANs, presents a great challenge. The large size of these images coupled with the low acceptance of traditional image compression techniques within the medical community compounds the problem even more. These factors are of enormous significance in a hospital setting in the context of real-time image collaboration. However, recent advances in medical image compression techniques such as diagnostically lossless compression methodology, has made the solution to this difficult problem feasible. The growing popularity of high speed wireless LAN in enterprise applications and the introduction of the new 802.11n draft standard have made this problem pertinent. The thesis makes recommendations on the degree of compression to be performed for specific instances of image communication applications based on the image size and the underlying network devices and their topology. During our analysis, it was found that for most cases, only a portion of the image; typically the region of interest of the image will be able to meet the time deadline requirement. This dictates a need for adaptive method for maximizing the percentage of the image delivered to the receiver within the deadline. The problem of maximizing delivery of regions of interest of image data within the deadline has been effectively modeled as a multi-commodity flow problem in this work. Though this model provides an optimal solution to the problem, it is NP hard in computational complexity and hence cannot be implemented in dynamic networks. An approximation algorithm that uses greedy approach to flow allocation is proposed to cater to the connection requests in real time. While implementing integer programming model is not feasible due to time constraints, the heuristic can be used to provide a near-optimal solution for the problem of maximizing the reliable delivery of regions of interest of medical images within delay deadlines. This scenario may typically be expected when new connection requests are placed after the initial flow allocations have been made.

<p>Rapporten är en jämförande studie av täckningsgrad och bandbredd i trådlösa nätverk av typ hot-spot med IEEE 802.11A/G respektive IEEE 802.11N Draft 2.0. Studien är gjord i tre olika scenarion på Kvarnholmen i Kalmar under april och maj månad 2008.</p>