The fifth generation (5G) has developed a lot of interest, and there have been many reported initiatives in both industry and academics. Multiple-input-multiple-output (MIMO) is the most promising wireless access technique for next-generation networks in terms of spectral and energy efficiency (MIMO). In 4G systems, 2-Element MIMO antennas are already used, while 5G mobile terminals for smartphone hand-held devices are projected to use a bigger number of elements. The placement of many antennas in the restricted space of a smartphone PCB is one of the most critical challenges. As a result, for sub-6 GHz 5G applications, a new design technique based on dual-polarised antenna resonators for 6-Element, 8-Element MIMO configuration is proposed. The proposed MIMO design could improve the smartphone antenna system's chan-nel capacity, diversity function, and multiplexing gain, making it appropriate for 5G applica-tions. For distinct prospective bands of the sub-6 GHz spectrum, such as 2.6, 3.6, and 5.8 GHz, different types of novel and compact diversity MIMO antennas using Patch, Slot, and Planar inverted F antenna (PIFA) resonators are examined. Unlike previously reported MIMO antennas, the proposed designs provide full radiation coverage and polarisation diversity, as well as adequate gain and efficiency values to support several mainboard sides. Apart from sub-6 GHz frequencies, 5G devices are projected to support the centimetre/milli-metre wave spectrum's higher bands. To create linear phased arrays, small antennas can be placed at various locations on a smartphone board. For 5G smartphones, we propose novel linear phased arrays with tiny parts like Dipole and Quasi-Yagi resonators. In comparison to previously published designs, the suggested phased arrays have desirable qualities such as compact size, wide beam-steering, broad bandwidth, end-fire radiation, high gain, and efficiency. With a reduced mutual coupling function, the suggested 5G antennas can provide single-band, multi-band, and broad-band characteristics. Both models and measurements are used to an-alyse the fundamental features of 5G antennas, and good agreement is found. Furthermore, in the presence of the user and the smartphone components, good features are seen due to the small size and superior arrangement of elements. Because of these benefits, the sug-gested antennas are well-suited for usage in 5G smartphone applications.

The main objectives of this research are to investigate and design low profile antennas for mobile handsets applications using the balanced concept. These antennas are considered to cover a wide range of wireless standards such as: DCS (1710-1880 MHz), PCS (1850-1990 MHz), UMTS (1920-2170 MHz), WLAN (2400-2500 MHz and 5000-5800 MHz) and UWB frequency bands. Various antennas are implemented based on built-in planar dipole with a folded arm structure. The performance of several designed antennas in terms of input return loss, radiation patterns, radiation efficiency and power gain are presented and several remarkable results are obtained. The measurements confirm the theoretical design concept and show reasonable agreement with computations. The stability performance of the proposed antenna is also evaluated by analysing the current distribution on the mobile phone ground plane. The specific absorption rate (SAR) performance of the antenna is also studied experimentally by measuring antenna near field exposure. The measurement results are correlated with the calculated ones. A new dual-band balanced antenna using coplanar waveguide structure is also proposed, discussed and tested; this is intended to eliminate the balanced feed network. The predicted and measured results show good agreement, confirming good impedance bandwidth characteristics and excellent dual-band performance. In addition, a hybrid method to model the human body interaction with a dual band balanced antenna structure covering the 2.4 GHz and 5.2 GHz bands is presented. Results for several test cases of antenna locations on the body are presented and discussed. The near and far fields were incorporated to provide a full understanding of the impact on human tissue. The cumulative distribution function of the radiation efficiency and absorbed power are also evaluated.

This dissertation develops adaptive hp-Finite Element (FE) technology and a parallel sparse direct solver enabling the accurate modeling of the absorption of Electro-Magnetic (EM) energy in the human head. With a large and growing number of cell phone users, the adverse health effects of EM fields have raised public concerns. Most research that attempts to explain the relationship between exposure to EM fields and its harmful effects on the human body identifies temperature changes due to the EM energy as the dominant source of possible harm. The research presented here focuses on determining the temperature distribution within the human body exposed to EM fields with an emphasis on the human head. Major challenges in accurately determining the temperature changes lie in the dependence of EM material properties on the temperature. This leads to a formulation that couples the BioHeat Transfer (BHT) and Maxwell equations. The mathematical model is formed by the time-harmonic Maxwell equations weakly coupled with the transient BHT equation. This choice of equations reflects the relevant time scales. With a mobile device operating at a single frequency, EM fields arrive at a steady-state in the micro-second range. The heat sources induced by EM fields produce a transient temperature field converging to a steady-state distribution on a time scale ranging from seconds to minutes; this necessitates the transient formulation. Since the EM material properties depend upon the temperature, the equations are fully coupled; however, the coupling is realized weakly due to the different time scales for Maxwell and BHT equations. The BHT equation is discretized in time with a time step reflecting the thermal scales. After multiple time steps, the temperature field is used to determine the EM material properties and the time-harmonic Maxwell equations are solved. The resulting heat sources are recalculated and the process continued. Due to the weak coupling of the problems, the corresponding numerical models are established separately. The BHT equation is discretized with H¹ conforming elements, and Maxwell equations are discretized with H(curl) conforming elements. The complexity of the human head geometry naturally leads to the use of tetrahedral elements, which are commonly employed by unstructured mesh generators. The EM domain, including the head and a radiating source, is terminated by a Perfectly Matched Layer (PML), which is discretized with prismatic elements. The use of high order elements of different shapes and discretization types has motivated the development of a general 3D hp-FE code. In this work, we present new generic data structures and algorithms to perform adaptive local refinements on a hybrid mesh composed of different shaped elements. A variety of isotropic and anisotropic refinements that preserve conformity of discretization are designed. The refinement algorithms support one- irregular meshes with the constrained approximation technique. The algorithms are experimentally proven to be deadlock free. A second contribution of this dissertation lies with a new parallel sparse direct solver that targets linear systems arising from hp-FE methods. The new solver interfaces to the hierarchy of a locally refined mesh to build an elimination ordering for the factorization that reflects the h-refinements. By following mesh refinements, not only the computation of element matrices but also their factorization is restricted to new elements and their ancestors. The solver is parallelized by exploiting two-level task parallelism: tasks are first generated from a parallel post-order tree traversal on the assembly tree; next, those tasks are further refined by using algorithms-by-blocks to gain fine-grained parallelism. The resulting fine-grained tasks are asynchronously executed after their dependencies are analyzed. This approach effectively reduces scheduling overhead and increases flexibility to handle irregular tasks. The solver outperforms the conventional general sparse direct solver for a class of problems formulated by high order FEs. Finally, numerical results for a 3D coupled BHT with Maxwell equations are presented. The solutions of this Maxwell code have been verified using the analytic Mie series solutions. Starting with simple spherical geometry, parametric studies are conducted on realistic head models for a typical frequency band (900 MHz) of mobile phones. / text

Actuellement, les fantassins de l'armée française sont équipés d'un système de radiocommunication quand ils sont en intervention sur le terrain. L'antenne utilisée pour émettre et recevoir les signaux radiofréquences (RF) est du type monopole appelée antenne fouet placée parallèlement au corps du fantassin au niveau de la clavicule gauche. Cependant, l'antenne fouet perturbe le champ de vision des fantassins surtout lorsqu'ils tournent leur tête vers la gauche. De plus, la position de l'antenne fouet gêne les fantassins gauchers lorsqu'ils sont en position de tir. Enfin, l'antenne fouet rajoute un poids supplémentaire. Il est évident alors que l'intégration de l'antenne dans les gilets militaires permet de mieux répondre aux besoins des fantassins notamment en termes d'ergonomie. Cependant une telle intégration doit aussi répondre aux besoins d'efficacité de rayonnement, de couverture spatiale et de protection du corps vis-à-vis du rayonnement de l'antenne. De plus les contraintes liées à la technologie de réalisation doivent être prises en compte. La thèse est focalisée sur la conception et la caractérisation d'antennes intégrées aux gilets militaires. Le travail de recherche s'est fait dans le cadre du projet collaboratif GIANTE, soutenu par le dispositif DGA-RAPID, associant les partenaires complémentaires : SAFRAN Sagem, le laboratoire LCIS et ARDEJE. Le travail inclue tous les développements relevant de la conception électromagnétique avec la prise en compte du corps humain et le suivi de la réalisation par impression numérique assurée par ARDEJE qui possède la technologique jet d'encre. Il concerne également la caractérisation RF (adaptation, bande passante, diagramme de rayonnement) des antennes avec un banc expérimental adapté et l'évaluation des performances globales des antennes en environnements fonctionnels (milieu dégagé, milieu urbain, forêt). / Nowadays, the infantrymen of French army are equipped with a radio communication system when they are in field action. The antenna used to transmit and receive Radiofrequency (RF) signals is a monopole antenna called as whip antenna. It is placed parallel to the infantryman's body at the left clavicle. However, the whip antenna disrupts the field of view of infantrymen particularly when they turn their head to the left. Moreover, the position of the whip antenna bothers the left-handed infantrymen when they are in fire position. Finally, the whip antenna adds an additional weight to the infantrymen. Thus, it is obvious that the integration of the antenna into the military jackets allows to better meet the needs of infantrymen particularly in terms of ergonomy. However such an integration must also meet the needs in terms of radiation efficiency, spatial coverage and protection of the body against the antenna radiation. Moreover, the constraints of realization technology must be taken into account. The thesis is focused on the design and characterization of integrated antennas into military jackets. The research work is performed within the collaborative project GIANTE, supported by the DGA-RAPID frameproject, associating complementary partners: SAFRAN Sagem, laboratory LCIS, and ARDEJE. The work includes all the electromagnetic studies required by the environmental constraints by taking account the human body. It also includes the follow-up of the realizations made by ARDEJE that masters inkjet printing technologies. The RF characterization (impedance matching, bandwidth, radiation pattern) of antennas with a suitable bench test and the evaluation of global performances of antennas in functional environments (environment free from obstructions, urban areas, forest) are also part of the thesis work.

Actuellement, les fantassins de l'armée française sont équipés d'un système de radiocommunication quand ils sont en intervention sur le terrain. L'antenne utilisée pour émettre et recevoir les signaux radiofréquences (RF) est du type monopole appelée antenne fouet placée parallèlement au corps du fantassin au niveau de la clavicule gauche. Cependant, l'antenne fouet perturbe le champ de vision des fantassins surtout lorsqu'ils tournent leur tête vers la gauche. De plus, la position de l'antenne fouet gêne les fantassins gauchers lorsqu'ils sont en position de tir. Enfin, l'antenne fouet rajoute un poids supplémentaire. Il est évident alors que l'intégration de l'antenne dans les gilets militaires permet de mieux répondre aux besoins des fantassins notamment en termes d'ergonomie. Cependant une telle intégration doit aussi répondre aux besoins d'efficacité de rayonnement, de couverture spatiale et de protection du corps vis-à-vis du rayonnement de l'antenne. De plus les contraintes liées à la technologie de réalisation doivent être prises en compte. La thèse est focalisée sur la conception et la caractérisation d'antennes intégrées aux gilets militaires. Le travail de recherche s'est fait dans le cadre du projet collaboratif GIANTE, soutenu par le dispositif DGA-RAPID, associant les partenaires complémentaires : SAFRAN Sagem, le laboratoire LCIS et ARDEJE. Le travail inclue tous les développements relevant de la conception électromagnétique avec la prise en compte du corps humain et le suivi de la réalisation par impression numérique assurée par ARDEJE qui possède la technologique jet d'encre. Il concerne également la caractérisation RF (adaptation, bande passante, diagramme de rayonnement) des antennes avec un banc expérimental adapté et l'évaluation des performances globales des antennes en environnements fonctionnels (milieu dégagé, milieu urbain, forêt). / Nowadays, the infantrymen of French army are equipped with a radio communication system when they are in field action. The antenna used to transmit and receive Radiofrequency (RF) signals is a monopole antenna called as whip antenna. It is placed parallel to the infantryman's body at the left clavicle. However, the whip antenna disrupts the field of view of infantrymen particularly when they turn their head to the left. Moreover, the position of the whip antenna bothers the left-handed infantrymen when they are in fire position. Finally, the whip antenna adds an additional weight to the infantrymen. Thus, it is obvious that the integration of the antenna into the military jackets allows to better meet the needs of infantrymen particularly in terms of ergonomy. However such an integration must also meet the needs in terms of radiation efficiency, spatial coverage and protection of the body against the antenna radiation. Moreover, the constraints of realization technology must be taken into account. The thesis is focused on the design and characterization of integrated antennas into military jackets. The research work is performed within the collaborative project GIANTE, supported by the DGA-RAPID frameproject, associating complementary partners: SAFRAN Sagem, laboratory LCIS, and ARDEJE. The work includes all the electromagnetic studies required by the environmental constraints by taking account the human body. It also includes the follow-up of the realizations made by ARDEJE that masters inkjet printing technologies. The RF characterization (impedance matching, bandwidth, radiation pattern) of antennas with a suitable bench test and the evaluation of global performances of antennas in functional environments (environment free from obstructions, urban areas, forest) are also part of the thesis work.

No description available.

Die vorliegende Arbeit untersucht die grundsätzliche Machbarkeit, Radiofrequenzimpulse (RF) der Ultrahochfeld (UHF) Magnetresonanztomographie (MRT) (B0≥7.0T) für therapeutische Verfahren wie die RF Hyperthermie oder die lokalisierte Freigabe von Wirkstoffträgern und Markern zu nutzen. Im Rahmen der Arbeit wurde ein 8-Kanal Sened/Empfangsapplikator entwickelt, der bei einer Protonenfrequenz von 298MHz operiert. Mit diesem weltweit ersten System konnte in der Arbeit experimentell bewiesen werden, dass die entwickelte Hardware sowohl zielgerichtete lokalisierte RF Erwärmung als auch MR Bildgebung und MR Thermometrie (MRTh) realisiert. Mit den zusätzlichen Freiheitsgraden (Phase, Amplitude) eines mehrkanaligen Sendesystems konnte aufgezeigt werden, dass der Ort der thermischen Dosierung gezielt verändert bzw. festgelegt werden kann. In realitätsnahen Temperatursimulationen mit numerischen Modellen des Menschen, wird in der Arbeit aufgezeigt, dass mittels des entwickelten Hybridaufbaus eine kontrollierte und lokalisierte thermische Dosierung im Zentrum des menschlichen Kopfes erzeugt werden kann. Nach der erfolgreichen Durchführung dieser Machbarkeitsstudie wurden in theoretischen Überlegungen, numerischen Simulationen und in ersten grundlegenden experimentellen Versuchen die elektromagnetischen Gegebenheiten von MRT und lokal induzierter RF Hyperthermie für Frequenzen größer als 298MHz untersucht. In einem Frequenzbereich bis zu 1.44GHz konnte der Energiefokus mit Hilfe spezialisierter RF Antennenkonfigurationen entscheidend weiter verkleinert werden, sodass Temperaturkegeldurchmesser von wenigen Millimetern erreicht wurden. Gleichzeitig konnte gezeigt werden, dass die vorgestellten Konzepte ausreichende Signalstärke der zirkular polarisierten Spinanregungsfelder bei akzeptabler oberflächlicher Energieabsorption erzeugen, um eine potentielle Machbarkeit von in vivo MRT bei B0=33.8T oder in vivo Elektronenspinresonanz (ESR) im L-Band zu demonstrieren. / The presented work details the basic feasibility of using radiofrequency (RF) fields generated by ultrahigh field (UHF) magnetic resonance (MR) (B0≥7.0T) systems for therapeutic applications such as RF hyperthermia and targeted drug delivery. A truly hybrid 8-channel transmit/receive applicator operating at the 7.0T proton MR frequency of 298MHz has been developed. Experimental verification conducted in this work demonstrated that the hybrid applicator supports targeted RF heating, MR imaging and MR thermometry (MRTh). The approach offers extra degrees of freedom (RF phase, RF amplitude) that afford deliberate changes in the location and thermal dose of targeted RF induced heating. High spatial and temporal MR temperature mapping can be achieved due to intrinsic signal-to-noise ratio (SNR) gain of UHF MR together with the enhanced parallel imaging performance inherent to the multi-channel receive architecture used. Temperature simulations in human voxel models revealed that the proposed hybrid setup is capable to deposit a controlled and localized RF induced thermal dose in the center of the human brain. After demonstrating basic feasibility, theoretical considerations and proof-of-principle experiments were conducted for RF frequencies of up to 1.44GHz to explore electrodynamic constraints for MRI and targeted RF heating applications for a frequency range larger than 298MHz. For this frequency regime a significant reduction in the effective area of energy absorption was observed when using dedicated RF antenna arrays proposed and developed in this work. Based upon this initial experience it is safe to conclude that the presented concepts generate sufficient signal strength for the circular polarized spin excitation fields with acceptable specific absorption rate (SAR) on the surface, to render in vivo MRI at B0=33.8T or in vivo electron paramagnetic resonance (EPR) at L-Band feasible.

Cette thèse présente les travaux de développement de formulations injectables capables de se solidifier in situ, formant ainsi un implant piégeant des microparticules magnétiques en vue du traitement de tumeurs par induction magnétique d'une hyperthermie locale modérée. Nous exposons tout d'abord le contexte physique, biologique et clinique de l'hyperthermie comme traitement anticancéreux, particulièrement des modalités électromagnétiques. Les performances in vitro et in vivo des matériaux et formulations sont alors présentées. L'objet du chapitre suivant est la caractérisation des propriétés physicochimiques, magnétiques, et chauffantes, dans un champ magnétique alternatif (115 kHz, 9 - 12 mT), des microparticules de silice renfermant des nanoparticules d'oxyde de fer superparamagnétiques (SPIONs) et de deux de leurs formulations: un hydrogel d'alginate de sodium et un organogel de poly(éthylène-co-alcool vinylique) dans le diméthylsulfoxide. Finalement, nous présentons le potentiel thérapeutique de 20 minutes d'hyperthermie locale induite après injection de l'organogel superparamagnétique dans un modèle murin sous-cutané de tumeurs nécrosantes de colocarcinome humain.