Aeronautical telemetry systems have historically been implemented with constant envelope modulations like CPM. Shifts in system constraints including reduced available bandwidth and increased throughput demands have caused many in the field to reevaluate traditional methods and design practices. This work examines the costs and benefits of using APSK for aeronautical telemetry instead of CPM. Variable rate turbo codes are used to improve the power efficiency of 16- and 32-APSK. Spectral regrowth in nonlinear power amplifiers when driven by non-constant envelope modulation is also considered. Simulation results show the improved spectral efficiency of this modulation scheme over those currently defined in telemetry standards. Additionally, the impact of transitioning from continuous transmission to burst-mode is considered. Synchronization loops are ineffective in burst-mode communication. Data-aided feed forward algorithms can be used to estimate offsets in carrier phase, frequency, and symbol timing between the transmitter and the receiver. If a data-aided algorithm is used, a portion of the transmitted signal is devoted to a known sequence of pilot symbols. Optimum pilot sequences for the three synchronization parameters are obtained analytically and numerically for different system constraints. The alternating sequence is shown to be optimal given a peak power constraint. Alternatively, synchronization can be accomplished using blind algorithms that do not rely on a priori knowledge of a pilot sequence. If blind algorithms are used, the observation interval can be longer than for data-aided algorithms. There are combinations of pilot sequence length and packet length where data-aided algorithms perform better than blind algorithms and vice versa. The conclusion is that a sequential arrangement of blind algorithms operating over an entire burst performs better than a CRB-achieving data-aided algorithm operating over a short pilot sequence.

Biological invasions are driving environmental state changes on a global scale. Exotic plant species must be successful at passing several abiotic and biotic filters to establish and disrupt the native plant community assembly. Understanding where exotic plants are on a regional scale and being able to characterize how exotic plants are generally interacting with their environment is crucial information for exotic species management (chapter 1). In the western United States human-related activities are augmenting the spread of exotic plant species by increasing the ignitions of wildfire. Wildfire can lead to nutrient pulses through the removal of intact native communities and returning some mineral content into the soil. Exotic plant species that have traits that efficiently acquire nutrients accompanied by rapid growth rates may outcompete native plants. In chapters 2, 3, and 4 experimental fires demonstrated that the direct effect of fire may not be as critical as the potential indirect effects of fire such as altering the behavior of consumers (chapter 2) and reducing competition (chapters 3 and 4). In the Mojave desert, rodent consumers can have strong top-down effects on plant community assembly through foraging selection preferences. Life history traits such as seedling and seed size can lead to differential herbivory and positively benefit some plant species while inhibiting others (chapter 1) which could indirectly alter plant-plant interactions. Plant competition is a biotic filter than can determine establishment success or failure. Species that with rapid growth rates and plastic growth responses are likely to be able to capitalize on fluctuations in available resources. In the Great Basin, forecasts in climate change models predict that precipitation timing will lead to heavier fall rains and more rain than snow in the winter. Water availability is one of the main limiting factors in semi-arid and arid ecosystems where native plants have adaptive traits to maximize resource use. The interaction of wildfire and changes in climate, specifically timing of precipitation is critical to understand to be able to predict and protect against increasing wildfire frequency and severity. In chapter three, the responses by a key exotic annual grass, Bromus tectorum, and keystone native perennial shrub Artemisia tridentata subsp. wyomingensis, were positive for increased early fall precipitation but much more pronounced for B. tectorum. Exotic annual plants are able to respond to changes in timing of fall precipitation and have extreme growth which leads to superior competitive abilities through interference and priority effects (chapter 4). Native plants can compete with exotics but the magnitude of the effects are diminished compared to the negative interaction from exotics. Together these findings demonstrate that across several regions exotic annual grasses are capable of passing through abiotic filters and disrupting biotic interactions of the native plant community. This is likely to lead to increased spread of exotic annual species and may indicate potential and availability of fine fuel production supporting increases in size and frequency of wildfires in the western United States.

The experiments reported within this thesis use psychophysical techniques to examine the factors which determine perceived multisensory timing in humans. Chapters 1 and 2 describe anatomical and psychophysical features of temporal processing, respectively, whilst Chapter 3 introduces the reader to psychophysical methods. Chapter 4 examines the relationship between two measures of sensory latency, reaction time (RT) and crossmodal temporal order judgment (TOJ). Despite task and attentional manipulations the two measures do not correlate, suggesting that they measure some fundamentally different aspect(s) of temporal perception. Chapter 5 examines the effects of adaptation to asynchronous stimulus pairs on perceived audiovisual (AV), audiotactile (AT) and visuotactile (VT) temporal order. Significant temporal shifts are recorded in all three conditions. Evidence is also presented showing that crossmodal TOJs are intransitive. Chapter 6 shows that concurrent adaptation to two sets of asynchronous AV stimulus pairs causes perceived AV temporal order to recalibrate at two locations simultaneously, and that AV asynchrony adaptation effects are significantly affected by observers¿ attention during adaptation. Finally, Chapter 7 shows that when observers are accustomed to a physical delay between motor actions and sensory events, an event presented at a reduced delay appears to precede the causative motor action. The data are well-described by a simple model based on a strong prior assumption of physical synchrony between motor actions and their sensory consequences.

Methods of determining natural frequencies of the D76D88, B76D88, A86E93, C86G90, C86L90 and C125L89 turbine wheel designs for various environmental conditions were investigated by application of Finite Element Analysis and beam theory. Modelling and simulation methods were developed ; the first method composed of 15 finite element simulations ; the second composed of 15 finite element simulations and a set of experimental frequency survey results; the third composed of 5 simulations , an incorporated mathematical model and a set of experimental frequency survey results. Each of these methods was designed to allow prediction of resonant frequency changes across a range of exhaust gas temperature and shaft rotational speed. For the new modelling and simulation methods, an analysis template and a plotting tool were developed using Microsoft Excel and MATLAB software. A graph showing a frequency-temperature-speed variations and a Campbell Diagram that incorporates material stiffening and softening effects across a range of rotational speeds was designed, and applied to the D76D88, B76D88, A86E93, C86G90, C86L90 and C125L89 turbine wheel designs. New design methodologies for turbine wheels were formulated and validated, showing a good agreement with a range of data points from frequency survey, strain-gauge telemetry and laser tip-timing test results. The results from the new design method were compared with existing single compensation factor methodology, and showed a great improvement in accuracy of prediction of modal vibration. A new nomenclature for the mode shapes of a turbocharger’s blade was proposed, designed and demonstrated to allow direct identification of associated mode shape. It is concluded that Finite Element Analysis combined with the frequency survey is capable of predicting changes in turbine natural frequencies and, when incorporated into the existing turbine design methodology, resulted in a major improvement in the accuracy of the predictions of vibration frequency. / Additional data files have been restricted by request.

Purpose: To determine the timing of first ambulation during hospitalization among patients admitted for acute myocardial infarction (AMI) and to identify the predictors of first ambulation. Methods: This retrospective cohort study included 500 AMI patients admitted during 2004 to one of three hospitals that form the Hamilton Health Sciences Corporation in Hamilton, Ontario, Canada. The patients were randomly selected from a total of 1,014 charts from the Hamilton Health Sciences Computerized Health Records (SOVERA). Using a chart abstraction tool, the following data were collected from each patient's chart: demographic information, past medical history, treatment, complications, and patterns of ambulation while in hospital. The primary outcome was first ambulation, defined as the first time patients walked during their hospital stay. Secondary outcomes included heart rate at discharge and mortality during hospitalization. The relationship between patient and care-related factors and the time of first ambulation after AMI was explored through a time to event analysis using Cox regression; the associations were expressed as hazard ratios. The fit for the proportional hazard model was assessed and a stratified proportional hazard model was performed for age. Results: Of the 500 charts, 60 were excluded. Of the 440 patients who were included in the final analysis, 340 (77.3%) walked during hospitalization. One hundred fifteen (26.1 %) walked during the first 48 hours (early walking), 98 (22.3%) walked between 49-96 hours (intermediate walking), and 127 (28.9%) walked after 96 hours (late walking). A total of 100 patients (22.7%) were categorized as non-walkers. Factors that emerged in the survival analysis that were positively associated with early ambulation after AMI and that proved the proportionality on the assessment of the fit of the model were: having a family history of cardiovascular disease (HR 1.33; 95% Cl 1.00, 1.44; p=0.05), receiving thrombolysis (HR 1.47; 95% Cl 1.11, 1.49; p=0.007), receiving nitroglycerin (HR 1.51; 95% Cl 1.19, 1.93; p<0.001 ), and taking calcium channel blockers (HR 1.58; 95% Cl 1.22, 2.05; p<0.001 ). Factors that were negatively associated with early ambulation after AMI were age >59 years (HR 0.98; 95% Cl 0.97, 0.99; p<0.001 ), having an arrhythmia in-hospital (HR 0.48; 95% Cl 0.22, 0.94; p=0.04), taking inotropic drugs (HR 0.72; 95% Cl 0.53, 0.98; p<0.001 ), and undergoing coronary artery bypass surgery (HR 0.51; 95% Cl 0.33, 0.78; p=0.002). Conclusion: There is variability in the timing of first ambulation among patients hospitalized with an AMI. Furthermore, those who walked early were more likely to have a family history of cardiovascular disease, have received thrombolysis, and be taking nitroglycerin or calcium channel blockers. Those least likely to walk early were older (>59 years), were more likely to have had an arrhythmia inhospital, to be taking inotropic drugs, and to have undergone coronary artery bypass surgery. / Thesis / Doctor of Philosophy (PhD)

Software-defined radio is a continuously developing technology applied in fields of mobile communications and among others. It is a radio communication system where software is used to implement parts of its functionality in an embedded system or computer. Devices which can transmit and receive different radio protocols based on software has major advantages. The ability to be able to reconfigure and change functionality on the fly to adapt to different environments is suited for multiple different applications, one of such is the environment in space. Distortions such as phase, frequency and timing offset all occur in such environment. The effects of these distortions can be reduced using different synchronization techniques in the receiver. A polyphase symbol timing synchronizer with two different timing error detectors, is designed in Simulink consisting of an 8-tap polyphase filter bank, a zero-crossing or Gardner timing error detector, a second order Phase-locked loop and a numerically controlled oscillator. The initial design uses floating-point precision. A fixed-point model is implemented using Xilinx System Generator and is used to generate a custom IP. Simulation is done by implementing a transceiver model with Simulink for the transmitter and parts of the receiver. The polyphase symbol timing synchronizer locks after about 4000 symbols for lower signal-to-noise and the Gardner timing error detector performs better than the zero-crossing error detector at higher signal-to-noise ratios.

No description available.

Quizalofop and florpyrauxifen-benzyl are both new herbicides for rice in the midsouthern U.S. Quizalofop is only effective for control of monocot weed species; therefore, mixtures of florpyrauxifen-benzyl with quizalofop could be beneficial in acetyl CoA carboxylase (ACCase)-resistant rice. Field experiments were conducted at the Delta Research and Extension Center in Stoneville, MS, in 2017 and 2018 to evaluate control of monocot and dicot weed species with sequential applications of quizalofop including auxinic herbicides in the first or second treatment. Other field experiments in 2017 and 2018 evaluated sequential applications of different rates of quizalofop with florpyrauxifen-benzyl included in treatments immediately prior to flooding. A final field experiment in 2017 and 2018 evaluated growth and yield of six ACCase-resistant rice cultivars and advanced lines following POST applications of florpyrauxifen-benzyl.

No description available.

No description available.