Lors de la mise au point de biocapteurs, le contrôle de l'état de surface sur laquelle sontimmobilisées les biomolécules est un paramètre crucial pour la fiabilité et la reproductibilité desmesures. Pour ce travail de Thèse, deux objectifs principaux ont été fixés :- obtenir de façon reproductible des films organiques fonctionnels capables de rendre lessurfaces inorganiques biocompatibles afin d'immobiliser des biomolécules sans les dénaturer.- se doter d'outils innovants afin d'analyser la distribution de biomolécules sur la surface etd'évaluer leur activité biologique à l'échelle de la molécule unique.L'immobilisation a été réalisée sur des SAMs terminées par une fonction acide carboxylique.Pour imager les surfaces nous avons choisi la Microscopie Atomique de Force (AFM) qui permetd'obtenir des informations à l'échelle nanométrique et de mesurer des interactions moléculaires del'ordre du piconewton (10-12 N).Des CNTs, générés par dépôt chimique en phase vapeur, sont fixés sur une pointe AFM. Puis Ilssont biofonctionnalisés selon un protocole de trempage original afin d'obtenir une modificationchimique sélective de leur apex. Les interactions entre un récepteur, immobilisé sur la surface, et sonligand, lié de façon covalente au CNT, sont mesurées à l'échelle de la molécule unique. / During the development of biosensors, control of the surface on which the biomolecules areimmobilized is a crucial parameter for the reliability and reproducibility of the measurements. For thisPhD work, two main objectives were set:- obtain in a reproducible way functional organic films able to make inorganic surfacebiocompatible for the immobilization of biomolecules without any denaturation.- develop innovative tools in order to analyze the distribution of biomolecules on the surface etevaluate their biological activity at single molecule scaleThe immobilization step was done on SAMs terminated by a carboxylic acid function.In order to image surfaces, Atomic Force Microscopy (AFM) was chosen. This technique permits toobtain information at nanometric scale and to measure molecular interactions in the range ofpiconewton forces (10-12 N).MWCNTs were linked to a commercial AFM tip by micro-welding under optical microscopy. CNTswere biofunctionalized at the nanotube apex by an original dipping procedure.The interactions between a ligand, immobilized on the surface, and a receptor covalently linked to aCNT have been characterized.

Neste trabalho foram utilizadas técnicas de difração de raios-x para estudar propriedades químicas e estruturais de ilhas de Ge:Si(001). Através de experimentos de difração por incidência rasante foi realizado um mapeamento estrutural da relaxação de strain dentro de pirâmides e domos de Ge. Alterando-se a energia dos raios-x próximo à borda K do Ge – em medidas de difração anômala – foi possível determinar a composição química dos dois tipos de ilhas. A energia elástica, obtida correlacionando-se estes dois resultados, provou ser um dos fatores responsáveis pelas transições morfológicas neste sistema. Uma extensão dos resultados, com o uso de um novo método de análise, permitiu um completo mapeamento tri-dimensional da estrutura e estequiometria dos domos de Ge. Por último, foi observada a existência de uma liga ordenada de SiGe dentro dos domos, indicando o importante papel da cinética de crescimento na incorporação de Si nas ilhas.

<p>This study firstly reports the development, characterisation, and application of thick-film acetylcholinesterase (AChE) biosensors based on a gold electrode modified with a mercaptobenzothiazole (MBT) self-assembled monolayer and either poly(omethoxyaniline) (POMA) or poly(2,5-dimethoxyaniline) (PDMA) in the presence of polystyrene(4-sulphonic acid) (PSSA). The Au/MBT/POMA-PSSA/AChE and Au/MBT/PDMA-PSSA/AChE biosensors were then applied to successfully detect standard organophosphorous and carbamate pesticides in a 0.1 M phosphate buffer, 0.1 M KCl (pH 7.2) solution. Secondly, it reports the construction of the Au/MBT/PANI/AChE/PVAc thick-film biosensor for the determination of certain organophosphate and carbamate pesticide solutions in selected aqueous organic solvent solutions.</p>

Die Oberflächeneigenschaften eines Festkörpers können mit Hilfe dünner, durch Selbstorganisation gebildeter Molekülschichten aus Alkoxysilan-Molekülen gezielt verändert werden. Mikrostrukturierte selbstangeordnete Monolagen (SAM) können für die Anwendung in Bauelementen aus organischen Halbleitern von großem Interesse sein. Mikrokontaktdruck und Photolithographie sind zwei etablierte Verfahren, die jedoch Vorlagen und Masken zur Strukturierung benötigen. Dadurch entstehen bei häufig wechselnden Strukturen nicht zu vernachlässigende Rüstzeiten und Kosten. In der vorliegenden Arbeit wird die Erzeugung lateral strukturierter Schichten von Octadecyltrichlorsilan (OTS) auf Siliziumoxidoberflächen am konkreten Beispiel zweier alternativer, sowohl maskenloser als auch kontaktloser Methoden demonstriert: (i) Tintenstrahlverfahren als rein additive Strukturierung, und (ii) laserinduzierte, photothermische Desorption als subtraktive Strukturierung einer OTS-SAM . Für das Tintenstrahldruckverfahren wird an einem Kontaktwinkelmessgerät eine Methode zur Beobachtung und Auswertung der Tropfenverdampfung implementiert und ein Modell für kleine Tropfen entwickelt. Für die subtraktive Strukturierung werden an einem selbst entwickelten Versuchsaufbau die leistungs- und geschwindigkeitsabhängige Strukturbreite untersucht. Die Ergebnisse der beiden Technologieansätze werden verglichen. / With help of thin layers of alkoxysilane molecules formed by self-assembly, the surface properties of solids can be controlled. Microstructured self-assembled monolayers (SAMs) are interesting for applications in components based on organic semiconductors. Two established technologies for the structuring of molecular monolayers are microcontact printing and photolithography, for which templates and masks need to be structured. In this way, setting times and costs are high if variable patterns have to be structured. In this work, the fabrication of laterally structured monolayers from octadecyltrichlorosilane (OTS) is demonstrated for two examples of alternative, both template-free and maskless technologies: (i) inkjet as a purely additive method, and (ii) photothermal laser desorption as a subtractive structuring of an OTS-SAM. For the inkjet technology, a method for the observation and analysis of the evaporation of a droplet is implemented at a goniometer and a mathematical model for small inkjet droplets is extrapolated, For the subtractive laser structuring, the achievable patterning resolution is investigated as a function of laser intensity and scanning speed. The results of both technological approaches are compared.

We developed new methods for controlling and studying microtubules (MTs) outside the complex workings of the living cell. Several surface treatments for preventing MT fouling on surfaces were analyzed and, for the first time, a self-assembled monolayer (SAM) was developed which prevented MT adsorption in the absence of passivating proteins. The morphology and thickness of the SAM was measured to determine the mechanism of formation and origin of the MT-resistant behavior. The SAM was integrated into electron beam lithography for patterning and manipulating MTs using electrophoresis. Reversible MT adsorption and patterning and alignment of single MTs were achieved. We characterized the mechanism for the MT migration under electric field with a focus on the electrodynamics of the flow cell and the forces acting on the MT, along with the time dependence of the process.

An alkyl-containing self-assembled monolayer is grafted on the silicon surface by a nature process in solutions. The alkyl thin film was used as the lubricant for the silica interface, usually applied to the MEMS or NENS domains. The ability of reducing friction for silica device at room temperature was improved, but little was known as the thin films existed at higher temperature during device was working or operating. In this study, we used Hexyltrichlorosilane (C6), Dodecyltrichlorosilane (C12), and Octadecyltrichlorosilane (C18) molecules to form self-assembled monolayers (SAMs) on silicon, and these monolayers exhibited different molecular packing properties due to different interactions between the molecules. Fourier transform infrared spectroscopy (FTIR) revealed that the short chain-length (C6) molecules exhibited poor packing on the surface at room temperature, and that the molecular packing of C6 was thermally stable up to 500 K. But the C12 and C18 monolayers exhibited abrupt blue shifts in FTIR at temperatures between 300 and 575 K, with stable packing observed over several temperature ranges. Furthermore, water contact angle measurements showed the C6, C12, and C18 molecular films changed from hydrophobic to hydrophilic as the sample temperature was increased. Atomic force microscopy (AFM) images revealed that pits had formed in the C18 monolayer after the temperature was increased to 460 K, which were caused by the molecular reorganization of C18 on the surface. This resulted in an abrupt change in the friction coefficient for the C18 monolayer at 460K as compared to the short C6 and C12 monolayers. However, the friction coefficients for all the SAM films still increased with temperature. Understanding the temperature-dependent behavior of SAM film molecules will assist in the design of better anti-wear monolayers to improve performance and increase lifetimes in modern MEMS and NEMS devices.

Low energy (tens of eV) polyatomic cations were used as probes for characterization of monolayers of spontaneously chemisorbed thiols on gold. Characteristics including chemical composition, surface order and orientation of the self-assembled monolayers (SAMs) can be derived by monitoring the products of projectile ion neutralization, surface-induced dissociation (SID), and ion-surface reactions.To study the influence of the terminal group chemical structures and orientations of the SAMs on ion-surface interactions, a series of semi-fluorinated alkane thiols with difluoromethylenes buried underneath hydrocarbon terminal groups were examined (CH3CF2CH2− and CH3CH2CF2−). Compared to terminally fluorinated SAMs, they showed more projectile ion neutralization and less internal to vibrational energy deposition into precursor ions. Projectile ion-hydrocarbon reactions decreased significantly when difluoromethylenes are one or two bonds away from the terminal group. Furthermore, ion-surface reaction results on surfaces with odd and even chain lengths suggested that they have similar terminal methyl orientations to their hydrocarbon counterparts.Mixed monolayers of CF3CF2(CH2)14SH (F-SAMs) and CH3(CH2)15SH (H-SAMs) with systematically changing electron transfer, energy deposition and ion-surface reaction were prepared using mixed thiols solution and micro-contact printing (μ-CP). The solution mixture system showed linear variations in electron transfer and energy deposition with different F-SAM surface concentrations, while non-linear changes occur for ion-surface reaction suggesting strong lateral interactions between the two components. These interactions are minimized in the μ-CP system containing domains of each thiol. Energy deposition on the patterned surfaces varies non-linearly with changing F-SAM concentration which differs from the homogenously mixed system.To explore SID with a 90 collision angle, eV SID of a series of protonated peptide ions were performed in an in-line sector Time-Of-Flight (TOF) mass spectrometer. The results were compared to keV collision-induced dissociation (CID) data collected with the same instrument. Fragmentation efficiency for SID was higher than CID for those peptides. In addition to the excellent control over laboratory collision energies with SID, different amount of energy deposition can be achieved when varying surface composition, e.g. using mixed F-SAM/H-SAM.Reactive ion scattering spectrometry (RISS) results provided more in-depth knowledge of low energy ion-surface interactions that will promote usage of RISS as a novel surface characterization technique.

Diese Arbeit beinhaltet unsere Studien an selbstorganisierenden Monoschichten (engl. SAM = self- assembled monolayer) einiger aromatischer Thiole auf Gold- und Kupferoberflächen. Die Bildung von Monoschichten von Thiophenol, 4-Mercaptophenol, 4-Nitrothiophenol, 4-Aminothiophenol, 1,4-Dithiobenzol, 4-Mercaptopyridin und 2-Mercaptopyridin auf Au und Cu wurde untersucht und charakterisiert. Das abschirmende Verhalten und die strukturelle Anordnung dieser Monoschichten wurden mit Hilfe elektrochemischer und spektroskopischer Methoden geprüft und bestimmt. Zyklische Voltammetrie und oberflächenverstärkte Raman Spektroskopie wurden intensiv zur Aufklärung von Elektronentransferreaktionen an diesen mit SAMs modifizierten Oberflächen genutzt. Elektrochemische Studien von Monoschichten aus Thiophenol, 4-Mercaptophenol, 4-Nitrothiophenol, 4-Aminothiophenol, 1,4-Dithiobenzol, 4-Mercaptopyridin und 2-Mercaptopyridin in 0,1 M wässriger KClO4-Lösung lassen schlussfolgern, dass diese Moleküle schwefelseitig an die Substratoberfläche gebunden sind. In 0,1 M wässriger KClO4-Lösung aufgenommene zyklische Voltammogramme an Gold- und Kupferoberflächen, welche mit oben genannten, aromatischen Thiolen beschichtet wurden, legen nahe, dass Adsorptionsschichten von Thiophenol und 1,4-Dithiobenzol eine stärkere Tendenz zum Abschirmen besitzen als andere. Durch das Einbringen von Kupferproben, welche mit genannten aromatischen Thiolen behandelt wurden, in 0,1 M Silbernitrat-Lösung können sehr leicht Silber-Nanodendritstrukturen erhalten werden. Abscheidezeit und Konzentration der Silbernitrat-Lösung haben einen großen Einfluss auf das Wachstum der Silber-Nanodendritstrukturen auf den modifizierten Kupferproben. Diese Silber-Nanodendritstrukturen besitzen eine hohe katalytische Aktivität hinsichtlich der Oxidation von Hydroquinon. Untersuchungen zur Korrosion an polykristallinem Kupfer, welches mit obigen aromatischen Thiolen modifiziert wurde, in 0,1 M Silbernitrate-Lösung ließen vermuten, dass dieses Kupfersubstrat mehr anodisches Verhalten zeigte als reines Kupfer bei ähnlichen Bedingungen. Zyklische Voltammetrie an wie oben behandeltem Kupfer in 0,1M wässriger KClO4-Lösung zeigte, dass die Geschwindigkeit der Kupferauflösung bei diesen Messungen erhöht war gegenüber anderen, in welchen reines Kupfer bei identischen Bedingungen eingesetzt wurde. / It deals with our studies on self-assembled monolayers of aromatic thiols on gold and copper surfaces. Monolayer formation of thiophenol, 4-mercaptophenol, 4-nitrothiophenol, 4-aminothiophenol, 1,4-dithiobenzene, 4-mer¬cap¬to¬pyridine and 2-mercaptopyridine on Au and Cu surfaces was studied and characterized. The blocking behaviour and structural arrange¬ments of these monolayers were evaluated and characterized using electrochemical and spec¬troscopic techniques. Cyclic voltammetry and surface enhanced Raman spectroscopy were extensively used for the study of electron transfer reactions on these SAM modified surfaces. Electrochemical and spectroelectrochemical studies of thiophenol, 4-mercaptophenol, 4-nitrothiophenol, 4-aminothiophenol, 1,4-dithiobenzene, 4-mercaptopyridine and 2-mercaptopyridine monolayers in aqueous solution of 0.1 M KClO4 suggest that these molecules adsorbed to substrate. Cyclic voltammetry of gold and copper covered with these aromatic thiolates recorded in aqueous solution of 0.1 M KClO4 suggests that adlayers of thio¬phenol and 1,4-dithiobenzene exhibit more blocking behavior than the other ones. Silver nanodendritic structures are easily produced by placing copper samples modified with these aromatic thiolates into 0.1 M silver nitrate solution. Deposition time and concentration of silver nitrate solution have great influence on growing up silver nanodendritic structures on the surface of modified copper samples. These silver nanodendritic structures exhibit electrocatalytic activity towards the oxidation of hydroquinone. Corrosion investigation of polycrystalline copper modified with these aromatic thiolates in 0.1 M silver nitrate solution suggest that copper substrate might be more anodic compared to bare copper under identical condition. Cyclic voltammetry of copper modified with these aromatic thiolates suggests that the rate of dissolution copper in aqueous solution of 0.1 M KClO4 is higher than bare copper in the same condition.

This thesis is an investigation of surface morphology and electronic structure of self-assembled monolayers (SAMs) and solid water films deposited on these SAMs using metastable impact electron spectroscopy (MIES) and infrared reflection-absorption spectroscopy (IRRAS). MIES uses electronically excited slow helium atoms which interact exclusively with the outermost surface layer. The results suggested that in the SAMs containing an odd number of carbon atoms the molecular orbitals localized on the terminal methyl groups are more exposed at the surface compared to those with an even number of carbon atoms. It was also established that solid water films are more uniform on a SAM substrate containing an odd number of carbon atoms. Thermal transformation of amorphous solid water to polycrystalline ice was also observed. MIES suggested that the molecular orbital of water attributed to the lone pair on the oxygen atom became less accessible at the surface upon the transformation.

<p>This study firstly reports the development, characterisation, and application of thick-film acetylcholinesterase (AChE) biosensors based on a gold electrode modified with a mercaptobenzothiazole (MBT) self-assembled monolayer and either poly(omethoxyaniline) (POMA) or poly(2,5-dimethoxyaniline) (PDMA) in the presence of polystyrene(4-sulphonic acid) (PSSA). The Au/MBT/POMA-PSSA/AChE and Au/MBT/PDMA-PSSA/AChE biosensors were then applied to successfully detect standard organophosphorous and carbamate pesticides in a 0.1 M phosphate buffer, 0.1 M KCl (pH 7.2) solution. Secondly, it reports the construction of the Au/MBT/PANI/AChE/PVAc thick-film biosensor for the determination of certain organophosphate and carbamate pesticide solutions in selected aqueous organic solvent solutions.</p>