Global ETD Search

81	Adaptive Quaternion Control for a Miniature Tailsitter UAV Knoebel, Nathan B. 30 August 2007 (has links) (PDF) The miniature tailsitter is a unique aircraft with inherent advantages over typical unmanned aerial vehicles. With the capabilities of both hover and level flight, these small, portable systems can produce efficient maneuvers for enhanced surveillance and autonomy with little threat to surroundings and the system itself. Such vehicles are accompanied with control challenges due to the two different flight regimes. Problems with the conventional attitude representation arise in estimation and control as the system departs from level flight conditions. Furthermore, changing dynamics and limitations in modeling and sensing give rise to significant attitude control design challenges. Restrictions in computation also result from the limited size and weight capacity of the miniature airframe. In this research, the inherent control challenges discussed above are addressed with a computationally efficient adaptive quaternion control algorithm. A backstepping method for model cancellation and consistent tracking of reference model attitude dynamics is derived. This is used in conjunction with two different algorithms designed for the identification of system parameters. For a metric of baseline performance, gain-scheduled quaternion feedback control is developed. With a regularized data-weighting recursive least-squares parameter estimation algorithm, the adaptive quaternion controller is shown to be better than the baseline method in simulation and hardware results. This method is also shown to produce universal performance for all aircraft with the three conventional control surface actuators (aileron, elevator, and rudder) barring saturation and assuming accurate system identification. Testing of attitude control algorithms requires development in quaternion-based navigational control and attitude estimation. A novel technique for hover north/east position control is derived. Also, altitude tracking in hover, given an inconsistent thrust system, is addressed with an original method of on-line throttle system identification. Means for quaternion-based level flight control are produced from adaptations made to existing techniques employed in the Brigham Young University Multi-Agent Coordination and Control Lab. Also generated are simple trajectories for transitions between flight modes. A method for the estimation of quaternion attitude is developed, which uses multiple sensors combined in a filtering technique similar to the fixed-gain Kalman filter. Simulation and hardware results of these methods are presented for concept validation. A discussion of the development and production of these testing means (a simulation environment and hardware flight test system) is provided. In culmination, a fully autonomous miniature tailsitter system is produced with results demonstrating its various capabilities. tailsitter autopilot adaptive quaternion control quaternion estimation quaternion navigation UAV MAV tailsitter simulation tailsitter autopilot design tailsitter adaptive control quaternion backstepping control least-squares parameter estimation tailsitter adaptive altitude control tailsitter path following tailsitter transition maneuvers tailsitter position control Mechanical Engineering
82	Stabilizační a autopilotní systém pro RC model letadla / Stability and autopilot system for airplane RC model Čamaj, Peter January 2014 (has links) The master thesis deals with design and realization of stabilizing and autopilot system, which is used in radio controlled model planes. The thesis contains a proposal of hardware platform, which is able to control the plane model based on data measured from a sensor system. Moreover, this thesis describes a software implementation of individual modules, which is measured the onboard values. The basic principles of stabilization and autonomous flight control are also summarized. In conclusion, the system is subjected to flight tests.
83	Robust Booster Landing Guidance/Control / Robust Booster Landnings Ledning/Styrning Çelik, Ugurcan January 2020 (has links) The space industry and the technological developments regarding space exploration hasn’t been this popular since the first moon landing. The privatization of space exploration and the vertical landing rockets made rocket science mainstream again. While being able to reuse rockets is efficient both in terms of profitability and popularity, these developments are still in their early stages. Vertical landing has challenges that, if neglected, can cause disastrous consequences. The existing studies on the matter usually don’t account for aerodynamics forces and corresponding controls, which results in higher fuel consumption thus lessening the economical benefits of vertical landing. Similar problems have been tackled in studies not regarding booster landings but regarding planetary landings. And while multiple solutions have been proposed for these problems regarding planetary landings, the fact that the reinforcement learning concepts work well and provide robustness made them a valid candidate for applying to booster landings. In this study, we focus on developing a vertical booster descent guidance and control law that’s robust by applying reinforcement learning concept. Since reinforcement learning method that is chosen requires solving Optimal Control Problems (OCP), we also designed and developed an OCP solver software. The robustness of resulting hybrid guidance and control policy will be examined against various different uncertainties including but not limited to wind, delay and aerodynamic uncertainty. / Rymdindustrin och den tekniska utvecklingen av rymdutforskningen har inte varit så populär sedan den första månlandningen. Privatiseringen av utforskningen av rymden och de vertikala landningsraketerna medförde att raketvetenskapen återkom som en viktig huvudfråga igen. Även om det är effektivt att återanvända raketer i form av lönsamhet och popularitet, är denna utveckling fortfarande i sina tidiga stadier. Vertikal landning har utmaningar som, om de försummas, kan orsaka katastrofala konsekvenser. De befintliga studierna i frågan redovisar vanligtvis inte aerodynamikkrafter och motsvarande regulatorer, vilket resulterar i högre bränsleförbrukning som minskar de ekonomiska fördelarna med vertikal landning. Liknande problem har hanterats i studier som inte avsåg boosterlandningar utan om planetariska landningar. Även om flera lösningar har föreslagits för dessa problem beträffande planetariska landningar, det faktum att förstärkningsinlärningskonceptet fungerar bra och ger robusthet gjorde dem till en giltig kandidat för att ansöka om boosterlandningar. I den här studien fokuserar vi på att utveckla en lagstiftning för styrning av vertikala booster-nedstigningar som är robust genom att tillämpa koncepten inom förstärkningsinlärning. Ef- tersom förstärkt inlärningsmetod som väljs kräver lösning av optimala kontrollproblem (OCP), designade och utvecklade vi också en OCP-lösningsmjukvara. Robustheten för resulterande hybridstyrning och kontrollpolicy kommer att undersökas mot olika osäkerheter inklusive, men inte begränsat till vind, fördröjning och aerodynamisk osäkerhet. Booster Rocket Reusable Stage Vertical Landing Auto-Pilot Guidance Control Navigation Reinforcement Learning Robust Optimization Optimal Control Uncertainty Analysis Booster raket återanvändbar scen vertikal landning autopilot ledning kontroll navigering förstärkningsinlärning robust optimering optimal kontroll osäkerhetsanalys Mathematics Matematik
84	Robust nonlinear control : from continuous time to sampled-data with aerospace applications. / Commande non linéaire robuste : du temps-continu jusqu’aux systèmes sous échantillonnage avec applications aérospatiales. Mattei, Giovanni 13 February 2015 (has links) La thèse porte sur le développement des techniques non linéaires robustes de stabilisation et commande des systèmes avec perturbations de model. D’abord, on introduit les concepts de base de stabilité et stabilisabilité robuste dans le contexte des systèmes non linéaires. Ensuite, on présente une méthodologie de stabilisation par retour d’état en présence d’incertitudes qui ne sont pas dans l’image de la commande («unmatched»). L’approche récursive du «backstepping» permet de compenser les perturbations «unmatched» et de construire une fonction de Lyapunov contrôlée robuste, utilisable pour le calcul ultérieur d’un compensateur des incertitudes dans l’image de la commande («matched»). Le contrôleur obtenu est appelé «recursive Lyapunov redesign». Ensuite, on introduit la technique de stabilisation par «Immersion & Invariance» comme outil pour rendre un donné contrôleur non linéaire, robuste par rapport à dynamiques non modelées. La première technique de contrôle non linéaire robuste proposée est appliquée au projet d’un autopilote pour un missile air-air et au développement d’une loi de commande d’attitude pour un satellite avec appendices flexibles. L’efficacité du «recursive Lyapunov redesign» est mis en évidence dans le deux cas d’étude considérés. En parallèle, on propose une méthode systématique de calcul des termes incertains basée sur un modèle déterministe d’incertitude. La partie finale du travail de thèse est relative à la stabilisation des systèmes sous échantillonnage. En particulier, on reformule, dans le contexte digital, la technique d’Immersion et Invariance. En premier lieu, on propose des solutions constructives en temps continu dans le cas d’une classe spéciale des systèmes en forme triangulaire «feedback form», au moyen de «backstepping» et d’arguments de domination non linéaire. L’implantation numérique est basée sur une loi multi-échelles, dont l’existence est garantie pour la classe des systèmes considérée. Le contrôleur digital assure la propriété d’attractivité et des trajectoires bornées. La loi de commande, calculée par approximation finie d’un développement asymptotique, est validée en simulation de deux exemples académiques et deux systèmes physiques, le pendule inversé sur un chariot et le satellite rigide. / The dissertation deals with the problems of stabilization and control of nonlinear systems with deterministic model uncertainties. First, in the context of uncertain systems analysis, we introduce and explain the basic concepts of robust stability and stabilizability. Then, we propose a method of stabilization via state-feedback in presence of unmatched uncertainties in the dynamics. The recursive backstepping approach allows to compensate the uncertain terms acting outside the control span and to construct a robust control Lyapunov function, which is exploited in the subsequent design of a compensator for the matched uncertainties. The obtained controller is called recursive Lyapunov redesign. Next, we introduce the stabilization technique through Immersion \& Invariance (I\&I) as a tool to improve the robustness of a given nonlinear controller with respect to unmodeled dynamics. The recursive Lyapunov redesign is then applied to the attitude stabilization of a spacecraft with flexible appendages and to the autopilot design of an asymmetric air-to-air missile. Contextually, we develop a systematic method to rapidly evaluate the aerodynamic perturbation terms exploiting the deterministic model of the uncertainty. The effectiveness of the proposed controller is highlighted through several simulations in the second case-study considered. In the final part of the work, the technique of I\& I is reformulated in the digital setting in the case of a special class of systems in feedback form, for which constructive continuous-time solutions exist, by means of backstepping and nonlinear domination arguments. The sampled-data implementation is based on a multi-rate control solution, whose existence is guaranteed for the class of systems considered. The digital controller guarantees, under sampling, the properties of manifold attractivity and trajectory boundedness. The control law, computed by finite approximation of a series expansion, is finally validated through numerical simulations in two academic examples and in two case-studies, namely the cart-pendulum system and the rigid spacecraft. Commande non linéaire Commande robuste Fonction de Lyapunov contrôlée robuste Modélisation de l'incertitude Backstepping robuste Commande multi-échelles Projet d'autopilote pour missile Stabilisation d'attitude Satellite flexible Nonlinear control Robust control Robust control Lyapunov function Uncertainty modeling Robust Backstepping Nonlinear sampled data control Multi-rate control Missile autopilot design Attitude stabilization Flexible spacecraft Recursive Lyapunov redesign Lypunov redesign Immersion and invariance
85	Návrh autopilota a letových řídících módů v prostředí Simulink / Development of Autopilot and Flight Director Modes inside a Simulink Environment Novák, Jiří January 2020 (has links) Tato diplomová práce je zaměřena na vývoj simulačního prostředí v Matlab/Simulink zvoleného letadla ve známém letovém režimu. Pozice a orientace letadla pohybujícího se ve vzduchu je popsána pohybovými rovnicemi se šesti stup\v{n}i volnosti. Soustava translačních, rotačních a kinematických rovnic tvoří soustavu devíti nelineárních diferenciálních rovnic prvního řádu. Tyto rovnice lze linearizovat okolo nějakého rovnovážného stavu, který budeme nazývat letovým režimem. Součástí simulačního prostředí je řídící systém letadla založený na PID regulaci. Základem je návrh autopilota, který řídí úhel podélného sklonu a úhel příčného náklonu. Součástí návrhu jsou takzvané „flight director\textquotedblright \phantom{s}m\'dy jako udržení výšky, volba kursu, regulace vertikální rychlosti, změna výšky, zachycení požadované výšky a navigační m\'{o}d založený na nelineárním navigačním zákonu. Optimalizace regulátorů za použití PSO algoritmu a Pareto optimalitě je využita pro nastavení parametrů PID regulátoru. Simulační prostředí je vizualizováno v softwaru FlightGear.
86	New modelling and simulation methods to support clean marine propulsion Grant, Michael 24 August 2021 (has links) The marine industry has increased its adoption of pure-electric, diesel-electric, and other non-traditional propulsion architectures to reduce ship emissions and fuel consumption. While these technologies can improve performance, the design of a propulsion system becomes challenging, given that no single technology is superior across all vessel types. Furthermore, even identical ships with different operating patterns may be better suited to different propulsion technologies. Addressing this problem, previous research has shown that if key elements of a vessel's operational pro file are known, simulation and optimization techniques can be employed to evaluate multiple propulsion architectures and result in a better propulsion system design and energy management strategy for a given vessel. While these studies have demonstrated the performance improvements that can be achieved from optimizing clean marine propulsion systems, they rely on vessel operational profiles obtained through physical measurement from existing ships. From a practical point of view, the optimization of a vessel's propulsion system needs to occur prior to a vessel's construction and thus precludes physical measurement. To this end, this thesis introduces a marine simulation platform for producing vessel operational profiles which enable propulsion system optimization during the ship design process. Core subsystem modules are constructed for simulating ship motions in 3 degrees of freedom and result in operational profile time-series, including propulsion power. Data is acquired from a benchmark vessel to validate the simulation. Results show the proposed approach strikes a balance between speed, accuracy, and complexity compared with other available tools. / Graduate model-based design MBD hybrid marine propulsion optimization simulation ship vessel DOF motion propeller torque thrust diesel-electric all-electric EV FES BES PHES HES ESS energy automation autonomous resistance hull ocean current added mass platform CFD hybrid electric batteries ultra capacitors emissions fuel consumption LNG motor engine energy management strategy control power energy wind waves strain coefficient hydrodynamic derivative MMG Maneuvering Modeling Group manoeuvring ferry design electric diesel azimuth thruster podded fouling roughness autopilot

Page generated in 0.0552 seconds