Global ETD Search

21	Integrated realizations of reconfigurable low pass and band pass filters for wide band multi-mode receivers Csipkes, Gabor-Laszlo 16 February 2006 (has links) (PDF) With the explosive development of wireless communication systems the specifications of the supporting hardware platforms have become more and more demanding. According to the long term goals of the industry, future communications systems should integrate a wide variety of standards. This leads to the idea of software defined radio, implemented on fully reconfigurable hardware.Among other reconfigurable hardware blocks, suitable for the software radio concept, an outstanding importance belongs to the reconfigurable filters that are responsible for the selectivity of the system. The problematic of filtering is strictly connected to the architecture chosen for a multi-mode receiver realization. According to the chosen architecture, the filters can exhibit low pass or band pass frequency responses.The idea of reconfigurable frequency parameters has been introduced since the beginning of modern filtering applications due to the required precision of the frequency response. However, the reconfiguration of the parameters was usually done in a limited range around ideal values. The purpose of the presented research is to transform the classical filter structures with simple self-correction into fully reconfigurable filters over a wide range of frequencies. The ideal variation of the frequency parameters is continuous and consequently difficult to implement in real circuits. Therefore, it is usually sufficient to use a discrete programming template with reasonably small steps.There are several methods to implement variable frequency parameters. The most often used programming templates employ resistor and capacitor arrays, switched according to a given code. The low pass filter implementation proposed in this work uses a special switching template, optimized for a quasi-linear frequency variation over logarithmic axes. The template also includes the possibility to compensate errors caused by component tolerances and temperature. Another important topic concerns the implementation of programmable band pass filters, suitable for IF sampling receivers. The discussion is centered on the feasibility and the flexibility of different band pass filter architectures. Due to the high frequency requirements, the emphasis lays on filters that employ transconductance amplifiers and capacitors. / Die rasch fortschreitende Entwicklung drahtloser Kommunikationssysteme führt zu immer anspruchsvolleren Spezifikationen der diese Systeme unterstützenden Hardwareplattformen. Zukünftige Kommunikationssysteme sollen übereinstimmend mit den längerfristigen Zielen der Industrie verschiedene Standards integrieren. Dies führt zu der Idee von vollständig rekonfigurierbarer Hardware, welche mittels Software gesteuert wird.Inmitten anderer rekonfigurierbarer Hardwareblöcke, die für das Software Radio Konzept geeignet sind, besitzen die steuerbaren Filter, welche wesentlichen Einfluss auf die Selektivität des Systems haben, eine enorme Bedeutung. Die Filterproblematik ist eng mit der gewählten Architektur der standardübergreifenden Empfängerrealisierung verknüpft. Die Filter können entsprechend der ausgesuchten Architektur Tiefpass- oder Bandpasscharakter annehmen.Die Idee rekonfigurierbarer Frequenzparameter wurde bereits mit Beginn moderner Filteranwendungen auf Grund geforderter Frequenzganggenauigkeit umgesetzt. Jedoch wurde die Parameterrekonfiguration üblicherweise nur in einem begrenzten Bereich um die Idealwerte herum vorgenommen. Das Ziel der vorgestellten Forschungsarbeit ist es, diese klassischen Filterstrukturen mit einfacher Selbstkorrektur in über große Frequenzbereiche voll rekonfigurierbare Filter zu transformieren. Idealerweise werden die Frequenzparameter kontinuierlich variiert weswegen sich die Implementierung in reellen Schaltkreisen als schwierig erweist. Deshalb ist es üblicherweise ausreichend, ein diskretes Steuerschema mit kleinen Schrittweiten zu verwenden.Es gibt verschiedene Methoden, variable Frequenzparameter zu implementieren. Die meisten Schemata verwenden Widerstands- und Kondensatorfelder, die entsprechend eines Kodes geschaltet werden. Die in dieser Arbeit vorgestellte Implementierung eines Tiefpassfilters nutzt ein spezielles Umschaltschema, welches für die quasi-lineare Frequenzvariation bei Darstellung über logarithmischen Axen optimiert wurde. Es beinhaltet weiterhin die Möglichkeit, Fehler zu kompensieren, die durch Bauelementtoleranzen und Temperaturschwankungen hervorgerufen werden.Ein weiteres interessantes Thema betrifft die Implementierung steuerbarer Bandpassfilter, die für Empfänger mit Zwischenfrequenzabtastung geeignet sind. Die Betrachtung beschränkt sich hierbei auf die Durchführbarkeit und Flexibilität verschiedener Bandpassfilterarchitekturen. Auf Grund hoher Frequenzanforderungen liegt der Schwerpunkt auf Filtern, die auf Transkonduktanzverstärkern und Kondensatoren basieren. Bandpassfilter Biquad Funkempfänger Grenzfrequenzabweichung Kondensatorfeld Operationsverstärker Schaltvorlage Software Radio Transkonduktanzverstärker Zeitkonstante steuerbare Filter steuerbarer Verstärker band pass filter biquads capacitor arrays corner frequency error opamp programmable filter software radio switching template time constant transconductance amplifier variable gain amplifier wireless communication systems wireless receivers ddc:620 rvk:ZN 6550 Aktives Filter Funkempfänger Mobile Telekommunikation OTA &lt;Elektronik&gt; Software Radio
22	Analogový vstupní díl pro softwarový přijímač / Front end for software receiver Slezák, Jakub January 2012 (has links) This thesis deals with a theoretical analysis of the basic parameters of receivers, input circuit architecture and signal digitization. According to the specified assignment it is outlined block scheme of front end for software receiver with specified components and the total bilance is calculated. Individual parts of the system are designed and realized. This is a set of four input filters for bandwidths: short waves up to 30 MHz, 87,5-108 MHz, 144-148 MHz and 174-230 MHz. The main point of design is a circuit containing a low-noise amplifiers, switches, and two amplifiers with adjustable amplification. Mainly are used integrated circuits from Analog Devices corporation. To control the various switches and adjustable amplifiers was designed a separate panel, which is connected to the main circuit via a cable. In the last phase was the whole system and its components subjected to measurements. Thanks to a number of mounted SMA connectors it is possible to measure different parts of the system and we are able to modify it partially.
23	Studium vlivů frekvenčních nestabilit oscilátorů v družicových komunikačních systémech / Studies of Influences of Oscillators Frequency Instabilities in Satellite Communication Systems Baran, Ondřej January 2011 (has links) The dissertation thesis deals with a study of an influence of a simultaneous incidence of an additive thermal noise and a multiplicative phase noise on the useful signal transmission in narrowband satellite communication systems. While the additive thermal noise affects the useful signal only on the receiver side of the communication system, the multiplicative phase noise is produced in all system oscillators. One investigates how the receiver filter bandwidth reduction takes effect on the influence of individual noise types. The thesis is divided into four units. The first one (chapters 4 and 5) solves the ways of modeling of both noise types. In the second part (chapter 6), on the simple example, the primary analysis of the phase noise influence is made. Basic modulation schemes used in the satellite communication are also discussed (chapter 7). Third part (chapter 8) is devoted to the modeling of a general digital system with a M PSK modulation made directly on the main carrier wave. The last part (chapter 9) describes the modeling of a digital system with a BPSK modulation on the auxiliary subcarrier wave followed by an SSB modulation on the main carrier wave. General conclusions are deduced from obtained simulation results.
24	Syntéza moderních struktur kmitočtových filtrů / Synthesis of Modern Structures of Frequency Filters Friedl, Martin January 2014 (has links) Within modern frequency structures, the filter frequency region of up to 10 MHz constitutes a promising research topic that currently attracts intensive attention of specialists interested in the problem. The main reason of this fact consists in that the rapid development of modern technology allows the production of innovated structures of the analog frequency filters required in the defined band. In this context, however, it is also necessary to refine the methods applied in the synthesis and optimization of these structures; such improvement should be carried out with respect to fundamental properties and usability of today's active elements (operational amplifiers with voltage feedback whose Gain Bandwidth Product ranges within units of GHz, operational amplifiers with current feedback, conveyors, transimpedance operational amplifiers). In this thesis, active blocks of synthesis inductors (SIs) and frequency dependent negative resistors (FDNRs) are examined in detail, and the author provides novel formulas to define the basic parameters of the dual circuits. Due emphasis was placed on optimizing the basic building blocks of the second order and defining the variation of their properties caused by the addition of modern active elements. The blocks were analyzed and modified in view of their possible use in higher-order circuits. For active filters of a higher order, simulations were performed to indicate the actual sensitivity of the cascade and non-cascade ARC structures. The following phase of the research comprised mainly the designing of several filters, and this activity was further completed with the verification of the methodology for the synthesis and optimization of higher-order loss ladder filters with modern active blocks. Special attention was paid also to the methods enabling the optimization of such filters, which are invariably based on RLC prototypes. In order to verify the theoretical conclusions, the author materialized a large number of sample optimized filters and measured their parameters. The closing section of the thesis describes the use of the filters in specific applications.
25	Numerická syntéza filtrujících antén / Numerical synthesis of filtering antennas Kufa, Martin January 2015 (has links) Dizertační práce je zaměřena na kompletní metodiku návrhu tří a čtyř prvkových flíčkových anténních řad, které neobsahují žádné filtrující části a přesto se chovají jako filtrující antény (filtény). Návrhová metodika kombinuje přístup pro návrh filtrů s přístupem pro anténní řady a zahrnuje tvarování frekvenčních odezev činitele odrazu a normovaného realizovaného zisku. Směr hlavního laloku přes pracovní pásmo je kontrolován také. S cílem kontrolovat tvary uvedených charakteristik, nové gi koeficienty jsou představeny pro návrh filtrujících anténních řad. Návrhová metodika byla ověřena na tří a čtyř prvkové filtrující anténní řadě přes frekvenční pásmo od 4,8 GHz do 6,8 GHz, pro šířku pásma celé struktury od 7 % do 14 % a pro požadovanou úroveň činitele odrazu od –10 dB do –20 dB. Celá metodika byla podpořena výrobou a měřením šesti testovacích vzorků filtrujících anténních řad s rozdílnými konfiguracemi. Ve všech případech se simulované a naměřené výsledky dobře shodují.
26	Integrated realizations of reconfigurable low pass and band pass filters for wide band multi-mode receivers Csipkes, Gabor-Laszlo 26 October 2005 (has links) With the explosive development of wireless communication systems the specifications of the supporting hardware platforms have become more and more demanding. According to the long term goals of the industry, future communications systems should integrate a wide variety of standards. This leads to the idea of software defined radio, implemented on fully reconfigurable hardware.Among other reconfigurable hardware blocks, suitable for the software radio concept, an outstanding importance belongs to the reconfigurable filters that are responsible for the selectivity of the system. The problematic of filtering is strictly connected to the architecture chosen for a multi-mode receiver realization. According to the chosen architecture, the filters can exhibit low pass or band pass frequency responses.The idea of reconfigurable frequency parameters has been introduced since the beginning of modern filtering applications due to the required precision of the frequency response. However, the reconfiguration of the parameters was usually done in a limited range around ideal values. The purpose of the presented research is to transform the classical filter structures with simple self-correction into fully reconfigurable filters over a wide range of frequencies. The ideal variation of the frequency parameters is continuous and consequently difficult to implement in real circuits. Therefore, it is usually sufficient to use a discrete programming template with reasonably small steps.There are several methods to implement variable frequency parameters. The most often used programming templates employ resistor and capacitor arrays, switched according to a given code. The low pass filter implementation proposed in this work uses a special switching template, optimized for a quasi-linear frequency variation over logarithmic axes. The template also includes the possibility to compensate errors caused by component tolerances and temperature. Another important topic concerns the implementation of programmable band pass filters, suitable for IF sampling receivers. The discussion is centered on the feasibility and the flexibility of different band pass filter architectures. Due to the high frequency requirements, the emphasis lays on filters that employ transconductance amplifiers and capacitors. / Die rasch fortschreitende Entwicklung drahtloser Kommunikationssysteme führt zu immer anspruchsvolleren Spezifikationen der diese Systeme unterstützenden Hardwareplattformen. Zukünftige Kommunikationssysteme sollen übereinstimmend mit den längerfristigen Zielen der Industrie verschiedene Standards integrieren. Dies führt zu der Idee von vollständig rekonfigurierbarer Hardware, welche mittels Software gesteuert wird.Inmitten anderer rekonfigurierbarer Hardwareblöcke, die für das Software Radio Konzept geeignet sind, besitzen die steuerbaren Filter, welche wesentlichen Einfluss auf die Selektivität des Systems haben, eine enorme Bedeutung. Die Filterproblematik ist eng mit der gewählten Architektur der standardübergreifenden Empfängerrealisierung verknüpft. Die Filter können entsprechend der ausgesuchten Architektur Tiefpass- oder Bandpasscharakter annehmen.Die Idee rekonfigurierbarer Frequenzparameter wurde bereits mit Beginn moderner Filteranwendungen auf Grund geforderter Frequenzganggenauigkeit umgesetzt. Jedoch wurde die Parameterrekonfiguration üblicherweise nur in einem begrenzten Bereich um die Idealwerte herum vorgenommen. Das Ziel der vorgestellten Forschungsarbeit ist es, diese klassischen Filterstrukturen mit einfacher Selbstkorrektur in über große Frequenzbereiche voll rekonfigurierbare Filter zu transformieren. Idealerweise werden die Frequenzparameter kontinuierlich variiert weswegen sich die Implementierung in reellen Schaltkreisen als schwierig erweist. Deshalb ist es üblicherweise ausreichend, ein diskretes Steuerschema mit kleinen Schrittweiten zu verwenden.Es gibt verschiedene Methoden, variable Frequenzparameter zu implementieren. Die meisten Schemata verwenden Widerstands- und Kondensatorfelder, die entsprechend eines Kodes geschaltet werden. Die in dieser Arbeit vorgestellte Implementierung eines Tiefpassfilters nutzt ein spezielles Umschaltschema, welches für die quasi-lineare Frequenzvariation bei Darstellung über logarithmischen Axen optimiert wurde. Es beinhaltet weiterhin die Möglichkeit, Fehler zu kompensieren, die durch Bauelementtoleranzen und Temperaturschwankungen hervorgerufen werden.Ein weiteres interessantes Thema betrifft die Implementierung steuerbarer Bandpassfilter, die für Empfänger mit Zwischenfrequenzabtastung geeignet sind. Die Betrachtung beschränkt sich hierbei auf die Durchführbarkeit und Flexibilität verschiedener Bandpassfilterarchitekturen. Auf Grund hoher Frequenzanforderungen liegt der Schwerpunkt auf Filtern, die auf Transkonduktanzverstärkern und Kondensatoren basieren. info:eu-repo/classification/ddc/620 ddc:620
27	Aktivní kmitočtové filtry pro vyšší frekvence / Active Frequency Filters for Higher Frequencies Fröhlich, Lubomír January 2014 (has links) This thesis deals with the synthesis and optimization of frequency analogue filters with modern active elements usable for higher frequencies. The thesis is divided into three parts, the first part deals with the problematic concerning Leap-Frog combined ARC structure. Due to a difficult design, this method is not described in a detail and used in practice, although it shows e.g. low sensitivity. Firstly, a complete analysis of individual filters was made (for and T endings) and consequently these findings were used during implementation of this method to NAF program. Finally, samples of real filters were realized (for verification of functioning and correct design). Another very interesting topic concerning filters is usage of coupled band-pass for small bandwidth, where it is necessary to solve the problems concerning ratio of building elements values, but also price, quality, size of coils, sensitivity, Q factors, coefficients etc. That is why in practice a coil is very often substituted with other equivalent lossy and lossless blocks which create ARC filters structure. The design and the possibility of usage of lossy grounded elements were described here (such as synthetic inductors, frequency dependent negative resistor). Some parts of the design are individual computer sensitivity analysis, setting of usage and quality comparison of individual lossy grounded blocks. Besides, a program for these elements was created, it is useful for a quick design and depiction of transfer characteristics. The third part deals with the usage of tuning universal filters consisting three or more operational amplifiers, which secures its universality and possibility to create different kinds of transfer characteristic. In practice, Akerberg - Mossberg and Kerwin - Huelsman - Newcomb are the most used types of filters. These were also compared with less common universal filters. In the end, the possibility of digital tuning of universal filter with the help of digital potentiometers for filters of 10th order and frequency around 1 MHz was shown.
28	Railway curve squeal: Statistical analysis of train speed impact on squeal noise Asplund, Ruben January 2024 (has links) No description available. ml operation maintenance railway maintenance railway curve machine learning statistics railway train passenger train x60 squeal noise curve squeal squealing noise squeal wheel squeal squealing programming system development computer engineering data visualization data preprocessing industrial computer systems matlab python vibration vibrations vibration signals signals and systems filtering signal processing computer systems communication system infrastructure technology infrastructure track t-test z-test random forest xgboost feature importance speed detection band-pass filter script yaw angle angle of attack decision tree gbdt filter temperature humidity dew point curve radius cloud accelerometers sensors track rail statistical analysis acoustics sound ai artificial intelligence gradient boosting decision trees curve software development drift underhåll järnvägsunderhåll järnvägskurva maskininlärning statistik järnväg tåg x60 skrikljud snäva kurvor kurvradie kurvskrik hjulskrik programmering systemutveckling datateknik data industriella datorsystem matlab python vibration signaler vibrations signaler signaler och system filtrering signalbehandling datorsystem kommunikationssystem infrastrukturteknik infrastruktur spår t-test z-test random forest Södertälje band-pass filter hastighets detektion attackvinkeln anfallsvinkel IMx SKF temperatur fuktighet daggpunkt accelerometer järnvägskurvskrik tåg hastighetens statistisk analys akustik ljud ai kurva kurvor mjukvaruutveckling artificiell intelligens Infrastructure Engineering Infrastrukturteknik Signal Processing Signalbehandling Communication Systems Kommunikationssystem Computer Systems Datorsystem

Search results