<p>Ab-initio results of the core-level shift and the distribution about the average for the 3<i>d</i>_5/2 electrons of Ag, Pd and 2<i>p</i>_3/2 of Cu are presented for the face-centered-cubic AgPd and CuPd random alloys. The complete screening model, which includes both initial and final states effects in the same scheme, has been used in the investigations. </p><p>The alloys have been modeled with a supercell containing 256 atoms. Density-functional theory calculations are carried out using the locally self consistent Green's function approach. </p><p>Results from the calculations clearly shows that the core-level shift distributions characteristic is Gaussian, but the components reveals a substantial difference in the FWHM (Full-Width at Half-Maximum). Comparison between the experimental and the calculated broadening shows a remarkable agreement.</p>

Ab-initio results of the core-level shift and the distribution about the average for the 3d5/2 electrons of Ag, Pd and 2p3/2 of Cu are presented for the face-centered-cubic AgPd and CuPd random alloys. The complete screening model, which includes both initial and final states effects in the same scheme, has been used in the investigations. The alloys have been modeled with a supercell containing 256 atoms. Density-functional theory calculations are carried out using the locally self consistent Green's function approach. Results from the calculations clearly shows that the core-level shift distributions characteristic is Gaussian, but the components reveals a substantial difference in the FWHM (Full-Width at Half-Maximum). Comparison between the experimental and the calculated broadening shows a remarkable agreement.

This thesis analyzes charge properties of (undoped) cuprate compounds from a theoretical point of view. The central question considered here is: How does the dimensionality of the CU-O sub-structure influence its charge degrees of freedom? The model used to describe the Cu-O sub-structure is the three- (or multi-) band Hubbard model. Analytical approaches are employed (ground-state formalism for strongly correlated systems, Mori-Zwanzig projection technique) as well as numerical simulations (Projector Quantum Monte Carlo, exact diagonalization). Several results are compared to experimental data. The following materials have been chosen as candidates to represent different Cu-O sub-structures: Bi2CuO4 (isolated CuO4 plaquettes), Li2CuO2 (chains of edge-sharing plaquettes), Sr2CuO3 (chains of corner-sharing plaquettes), and Sr2CuO2Cl2 (planes of plaquettes). Several results presented in this thesis are valid for other cuprates as well. Two different aspects of charge properties are analyzed: 1) Charge properties of the ground state 2) Charge excitations. (gekürzte Fassung)

The main focus of this thesis is ab initio modeling of core level spectra with a high-level quantum chemical description both of the chemical interactions and of local atomic multiplet effects. In particular, the combination of calculations and synchrotron-based core-level spectroscopy aims at understanding the local structure of the electronic valence in transition metal complexes, and the details of the solvation mechanisms of electrolyte solutions, systems relevant for the dye-sensitized solar cell. Configurational sampling in solution is included through molecular dynamics simulations. Transition metal complexes are studied with x-ray absorption (XA) and resonant inelastic scattering (RIXS) spectroscopy, characterizing excited states with atomic site specificity. The theoretical multiconfigurational method, applying an active-space partitioning of the molecular orbitals (RASSCF), is used to assign the transitions observed in spectra of hydrated Ni2+ explicitly, including charge transfer and multiplet effects. Furthermore, the solvent-induced binding energy properties of the I- and I3- anions in aqueous, ethanol, and acetonitrile solutions are analyzed using photoelectron spectroscopy (XPS). The study shows that specific ion–solvent interactions are important for the core-level binding energy shifts in solution. The special case with I3- dissolved in water, where hydrogen bonding causes breaking of the molecular symmetry, is treated and proves that the geometry changes influence the photoelectron spectrum of aqueous I3- directly.

The research presented in this thesis concerns experimental studies of thin manganese silicide and germanide layers, grown by solid phase epitaxy on the Si(111)7×7 and the Ge(111)c(2×8) surfaces, respectively. The atomic and electronic structures, as well as growth modes of the epitaxial Mn-Si and Mn-Ge layers, were investigated by low-energy electron diffraction (LEED), angle-resolved photoelectron spectroscopy (ARPES), core-level spectroscopy (CLS), and scanning tunneling microscopy and spectroscopy (STM and STS). The magnetic properties of the Mn-Ge films were investigated by X-ray magnetic circular dichroism (XMCD). The Mn-Si layers, annealed at 400 °C, showed a √3×√3 LEED pattern, consistent with the formation of the stoichiometric monosilicide MnSi. Up to 4 monolayers (ML) of Mn coverage, island formation was observed. For higher Mn coverages, uniform film growth was found. Our results concerning morphology and the atomic and electronic structure of the Mn/Si(111)-√3×√3 surface, are in good agreement with a recent theoretical model for a layered MnSi structure and the √3×√3 surface structure. Similar to the Mn-Si case, the grown Mn-Ge films, annealed at 330 °C and 450 °C, showed a √3×√3 LEED pattern. This indicated the formation of the ordered Mn5Ge3 germanide. A strong tendency to island formation was observed for the Mn5Ge3 films, and a Mn coverage of about 32 ML was needed to obtain a continuous film. Our STM and CLS results are in good agreement with the established model for the bulk Mn5Ge3 germanide, with a surface termination of Mn atoms arranged in a honeycomb pattern. Mn-Ge films grown at a lower annealing temperature, 260 °C, showed a continuous film at lower coverages, with a film structure that is different compared to the structure of the Mn5Ge3 film. XMCD studies showed that the low-temperature films are ferromagnetic for 16 ML Mn coverage and above, with a Curie temperature of ~250 K.

Among the well-known methods to form or modify the composition and physical properties of thin films, ion implantation has shown to be a very powerful technique. In particular, ion beam syntheses of binary iron silicide have been studied by several groups. Further, the interests in transition metal silicide systems are triggered by their potential use in advanced silicon based opto-electronic devices. In addition, ternary silicides have been by far less studied than their binary counterparts despite the fact that they have interesting magnetic and electronic properties. In this study, we investigate ion beam synthesis of Fe-Si binary structures and Fe-Co-Si ternary structures. This work involves fundamental investigation into development of a scalable synthesis process involving binary and ternary transitional metal silicide thin films and Nano-structures using low energy ion beams. Binary structures were synthesized by implanting Fe- at 50 keV energy. Since ion implantation is a dynamic process, Dynamic simulation techniques were used in these studies to determine saturation fluences for ion implantation. Also, static and dynamic simulation results were compared with experimental results. The outcome of simulations and experimental results indicate, dynamic simulation codes are more suitable than static version of the TRIM to simulate high fluence, low energy and, heavy ion implantation processes. Furthermore, binary Fe-Si phase distribution was determined at different implantation fluences and annealing temperatures. A higher fluence implantation at 2.16×1017 atoms/cm2 and annealing at 500 oC showed three different Fe-Si phase formations (β-FeSi2, FeSi and Fe3Si) in substrate. Further, annealing the samples at 800 oC for 60 minutes converted the Fe3Si phase into FeSi2 and FeSi phases. As an extension, a second set of Fe- ion implantations was carried with the same parameters while the substrate was placed under an external magnetic field. External magnetic fields stimulate the formation of magnetic phase centers in the substrate. X-ray diffraction (XRD) results shows formation of ferromagnetic Fe3Si phase in the Si matrix after annealing at 500 oC for 60 minutes. In addition, X-ray photoelectron spectra (XPS) provide further evidence for ferromagnetic metallic behavior of Fe3Si in the substrate. Ternary Fe-Co-Si structures were synthesized by implanting Fe- & Co- into a Si (100) substrate at an energy of 50 keV at saturation fluences. Both Fe- & Co- co-implantation were performed under external magnetic fields to enhance magnetic phase formation. Fe(1-x)CoxSi B20-type cubic structure can be synthesized on Si(100) substrate with 0.4≤x≤0.55 concentration range using ion implantation under external magnetic field. Moreover, magnetic measurement indicates a possible magnetic phase transformation at ~50 K. Further, XPS results also provide evidence for metallic & ferromagnetic properties in the thin film structure

With the development of new generation synchrotron facilities, the performances of various X-ray spectroscopies have become more advanced. In order to interpret the X-ray spectrum experiments of various novel materials related to transition metal and rare earth elements, new advanced theoretical methods are required. The present thesis incorporates four modus operandi based on the classic multiplet theory to study the core level X-ray spectroscopy of transition metal and rare earth element. The four approaches consist of new methods developed from classic multiplet approach to high level first-principles method assisted multiplet calculation. Some methods are selected from previous researches and some are invented by original researches. These methods are integrated together to form a complete set of multiplet computational methods. This set of multiplet computational methods can perform calculations on various X-ray spectroscopies such as XAS, XPS, XES and RIXS related to the core-level electron. These wide range of spectroscopic methods coupled to different multiplet theory approaches serve as efficient tools to understand the electronic structure of metal sites and their unique contribution to the physical/chemical properties of the materials. The thesis creatively improves the classic multiplet theory on several aspects: (1) the relation between crystal field parameters and local structure factors; (2) the difficulty of processing point group symmetry branching chain in low symmetric structure; (3) the first-principles calculation of semi-empirical parameters. Four modus operandi are presented in this thesis: the first is the classic multiplet theory consisting of the multiplet effect, crystal field effect and charge transfer effect via several semi-empirical parameters as description for these effects. The second level multiplet theoretical approach analyze the crystal field potential matrix in various symmetries according to the point group symmetry branching rules. Then the crystal field effect parameters used in classic multiplet theory are linked analytically to the specific structural factors such as bond length and angles. This approach is a good tool to study the structural distortion from higher to lower order symmetry with analysis of X-ray spectral feature changes in experiment. The third modus operandi adopts large cluster model consisting of point charges at equivalent atoms position to simulate the crystal field effect on the center metal site. This approach handles low order symmetric crystal field with long range effect in multiplet calculation in an easier way than the classic multiplet theory. The fourth modus operandi initially studies the system of interest in first-principles calculation for the electronic wavefunctions. Then the electronic wavefunctions are used to derive the maximally localized Wannier functions at metal/ligand sites. The analysis of these Wannier functions provide a lot of semi-empirical parameters required in the classic multiplet calculation approach in a first-principles way. This modus operandi has substantially resolved the problem of finding the best set of semi-empirical parameters to fit the calculated X-ray spectrum with experimental data. In order to study the core electrons of the light elements (such as C/N/O) around center metal ions, a theoretical calculation method used to study the core electrons' vibrationally-resolved X-ray spectroscopy is also introduced as a complementary research and applied to C1s core ionized XPS calculation as an example. / Med utvecklingen av nya generationens synkrotronanläggningar har prestandan för olika röntgenspektroskopier blivit mer avancerad. För att tolka röntgenspektrumexperiment av olika nya material relaterade till övergångsmetaller och sällsynta jordartsmetaller krävs nya avancerade teoretiska metoder. Denna avhandling inkorporerar fyra metoder baserade på den klassiska multiplettläran för att studera röntgenspektroskopi på kärnenerginivån för övergångsmetaller och sällsynta jordartsmetaller. De fyra metoderna består av nya metoder som utvecklats från den klassiska multiplettläran till multiplettberäkning med hjälp av högnivå-först-principer-metoder. Vissa metoder har valts från tidigare forskning och några har uppfunnits genom originalforskning. Dessa metoder integreras för att bilda en komplett uppsättning av multiplettberäkningsmetoder. Denna uppsättning av multiplettberäkningsmetoder kan utföra beräkningar av olika röntgenspektroskopier som XAS, XPS, XES och RIXS relaterade till elektroner på kärnenerginivån. Denna breda spektrum av spektroskopiska metoder som kopplas till olika multipletteteoretiska tillvägagångssätt fungerar som effektiva verktyg för att förstå den elektroniska strukturen hos metalliska platser och deras unika bidrag till materialets fysikaliska/kemiska egenskaper. Avhandlingen förbättrar på ett kreativt sätt den klassiska multiplettläran på flera områden: (1) förhållandet mellan kristallfältparametrar och lokala strukturfaktorer, (2) svårigheten med att hantera förgreningskedjor i punktgruppsymmetri för strukturer med låg symmetri, (3) först-principer-beräkning av semi-empiriska parametrar. Fyra metoder presenteras i denna avhandling: den första är den klassiska multiplettläran som omfattar multiplett-effekten, kristallfältseffekten och laddningsöverföringseffekten genom flera semi-empiriska parametrar som beskriver dessa effekter. Den andra multiplett-teoretiska tillvägagångssättet analyserar kristallfältspotensialmatrisen i olika symmetrier enligt reglerna för punktgruppsymmetri. Därefter kopplas de kristallfältseffektparametrar som används i den klassiska multiplettläran analytiskt till specifika strukturella faktorer som bindningslängd och vinklar. Detta tillvägagångssätt är ett bra verktyg för att studera strukturell distorsion från högre till lägre ordningssymmetri med analys av förändringar i röntgenspektrala funktionsändringar i experiment. Det tredje tillvägagångssättet använder en stor klustermetod som består av punktladdningar på ekvivalenta atompositioner för att simulera kristallfältsinverkan på metallcentralen. Detta tillvägagångssätt hanterar kristallfält med låg symmetri och lång räckvidd i multiplettberäkningar på ett enklare sätt än den klassiska multiplettläran. Det fjärde tillvägagångssättet studerar initialt det intressanta systemet med först-principer-beräkningar av elektronvågfunktioner. Därefter används dessa elektronvågfunktioner för att härleda maximalt lokaliserade Wannier-funktioner vid metall-/ligandpositioner. Analysen av dessa Wannier-funktioner ger många av de semi-empiriska parametrar som krävs i den klassiska multiplettberäkningsmetoden på ett först-principer-sätt. Detta tillvägagångssätt har i stor utsträckning löst problemet med att hitta den bästa uppsättningen semi-empiriska parametrar för att anpassa de beräknade röntgenspektrumen med experimentella data. För att studera de lättas elektroner (som C/N/O) runt centrala metalljoner introduceras även en teoretisk beräkningsmetod för att studera röntgenspektrum med vibrationell upplösning för kärnelektroner som ett kompletterande forskningsområde och tillämpas på beräkningar av C1s-kärnenerginivåns XPS som ett exempel. / <p>QC 2023-05-23</p>

Afin de pallier les problèmes de sécurité posés par l'emploi d'électrolytes liquides, des batteries incorporant des électrolytes solides ont été envisagées, conduisant à des dispositifs « tout solide » de type microbatterie au lithium. Dans le cas de ces systèmes, des études concernant les phénomènes aux interfaces restent à développer, afin de comprendre les processus limitants qui se déroulent à l'échelle atomique, similairement à la formation de la SEI (« Solid Electrolyte Interface »), bien connue dans le cas de l'utilisation d'électrolytes liquides. Dans ce type de problématiques, l'apport des méthodes de la chimie calculatoire, de part leur aspect prédictif et explicatif, est incontestable. Le présent travail de thèse, en prenant pour objet d'étude l'électrolyte solide LixPOyNz, se place dans ces problématiques, en proposant l'étude fondamentale de modèles d'interfaces électrode/électrolyte. L'électrolyte considéré étant un matériau amorphe, le premier verrou à lever consiste en la recherche d'un modèle de ce système, apte à simuler les propriétés électroniques de l'électrolyte réel, constituées par des données XPS cibles. Les calculs menés, visant à la modélisation des spectres XPS, ont permis tout à la fois de proposer un modèle de l'électrolyte et de mettre en lumière l'existence d'une coordinence des atomes d'azote non considérée jusqu'alors dans l'interprétation expérimentale des données XPS. La possible existence d'atomes d'azote monovalents au sein de l'électrolyte semble confirmée par des calculs vibrationnels, thermodynamiques et cinétiques complémentaires, tandis que ce résultat permet de réviser la vision communément admise de la structuration de l'électrolyte LixPOyNz et de la diffusion des ions Li+ au sein de celui-ci. Enfin, ce modèle structural de l'électrolyte a été employé à la simulation d'une interface électrode/électrolyte (LixPOyNz/Si). Une considération particulière a notamment été apportée à l'étude de l'adsorption du modèle à la surface et de la diffusion des ions lithium au sein de l'interface. / In order to overcome the safety issues induced by the use of liquid electrolytes, Li-ion batteries involving solid electrolytes have been considered, leading to an ‘all-solid’ kind of devices, commonly called microbatteries. For such devices, studies on the limiting processes that take place at electrode/electrolyte interfaces need to be done, to understand the electrochemical phenomenons likely to occur at the atomic scale, similarly to the well-known SEI formation. In this goal, methods of computational chemistry can provide both explanatory and predictive breakthroughs. The present work takes part in those issues by intending a study of electrode/electrolyte interfaces, considering LixPOyNz as the solid electrolyte material. Owing to the amorphous structuration of this system, the first barrier to break consists in the search for a suitable model, able to reproduce its real XPS electronic properties. Modelling of XPS spectra has both lead to propose a model of the electrolyte and highlight the possible existence of a new coordinence for nitrogen atoms, up to now unconsidered experimentally. Complementary calculations of Raman spectra, thermodynamic and kinetic data tend to evidence this coordinence, leading to a refinement of the commonly considered diffusion scheme. Finally, this structural model has been used to simulate an electrode/electrolyte interface (LixPOyNz/Si), with the particular aim of studying its adsorption on the electrode and the Li-ion diffusion through the interface.

<p>Theoretical investigations of spectroscopic and magnetic properties of metallic systems in the bulk, as well as in nanostructured materials, have been performed within the density functional theory. The major part of the present work studies the differences between binding energies of electrons tightly bound to the atoms, the so-called core electrons (in contrast with the valence electrons), that is, core-level binding energy shift (CLS). </p><p>By comparison between corresponding elemental core-levels for atoms situated in different chemical environments we obtain fundamental understanding of bonding properties of materials. The method of choice was the complete screening picture, which includes initial and final state effects on the same footing. The usefulness of CLS stems from that it is sensitive to differences in the chemical environment of an atom, which can be affected on one hand by the global composition of e.g. disordered materials, surfaces and interfaces, and on the other hand by the very local environment around an atom. Here CLSs have been obtained for both components in the fcc random alloys AgPd, CuPd, CuNi, CuPt, CuAu, PdAu, NiPd and NiPt. Moreover the model was extended to the Auger kinetic energy shift for the LMM Auger transition in AgPd alloys. Studies were also applied to the near surface and interface regions of PdMn nano structures on Pd(100), thin CuPd and AgPd films on inert Ru(0001), and at interfaces. The disorder broadening on CLS due to local environment effects was calculated in selected alloys.</p><p>A part of the thesis concern investigations related to the magnetic ordering in Invar alloys, including the influence of local environment effects. A study was made for the dependence of effective exchange parameter on the electron concentration, volume and local chemical composition.</p>

Theoretical investigations of spectroscopic and magnetic properties of metallic systems in the bulk, as well as in nanostructured materials, have been performed within the density functional theory. The major part of the present work studies the differences between binding energies of electrons tightly bound to the atoms, the so-called core electrons (in contrast with the valence electrons), that is, core-level binding energy shift (CLS). By comparison between corresponding elemental core-levels for atoms situated in different chemical environments we obtain fundamental understanding of bonding properties of materials. The method of choice was the complete screening picture, which includes initial and final state effects on the same footing. The usefulness of CLS stems from that it is sensitive to differences in the chemical environment of an atom, which can be affected on one hand by the global composition of e.g. disordered materials, surfaces and interfaces, and on the other hand by the very local environment around an atom. Here CLSs have been obtained for both components in the fcc random alloys AgPd, CuPd, CuNi, CuPt, CuAu, PdAu, NiPd and NiPt. Moreover the model was extended to the Auger kinetic energy shift for the LMM Auger transition in AgPd alloys. Studies were also applied to the near surface and interface regions of PdMn nano structures on Pd(100), thin CuPd and AgPd films on inert Ru(0001), and at interfaces. The disorder broadening on CLS due to local environment effects was calculated in selected alloys. A part of the thesis concern investigations related to the magnetic ordering in Invar alloys, including the influence of local environment effects. A study was made for the dependence of effective exchange parameter on the electron concentration, volume and local chemical composition.