In this study, 10 children’s books with water as a theme, for 1-6-year-olds have been reviewed through a content analysis, to get knowledge of how chemistry and physics are anchored and used in the books text. The results of the analysis showed a very weak use of science concepts while more everyday-words linked to water were used frequently. During the analysis, some texts in the books were considered, to be able to implement science concepts without disturbing the text flow. Why it seemed to have been avoided can possibly be linked to the different language usage and the society’s relationship to these.

<p>Processes where a molecule absorbs visible light and then converts the solar energy into chemical energy are important in many biological systems, such as photosynthesis and also in many technical applications e.g. photovoltaics. This thesis describes a part of a multidisciplinary project, aiming at a functional mimic of the natural photosynthesis, with the overall goal of production of a renewable fuel from sun and water. More specific, the thesis is focused on design and photophysical characterization of new photosensitizers, i.e. light absorbers that should be capable of transferring electrons to an acceptor and be suitable building blocks for supramolecular rod-like donor-photosensitizer-acceptor arrays.</p><p>The excited state lifetime, the excited state energy and the geometry are important properties for a photosensitizer. The work presented here describes a new strategy to obtain longer excited state lifetimes of the geometrically favorable Ru(II)-bistridentate type complexes, without a concomitant substantial decrease in excited state energy. The basic idea is that a more octahedral coordination around the Ru will lead to longer excited state lifetimes. In the first generation of new photosensitizers a 50-fold increase of the excited state lifetime was observed, going from 0.25 ns for the model complex to 15 ns for the best photosensitizer. The second generation goes another step forward, to an excited state lifetime of 810 ns. Furthermore, the third generation of new photosensitizers show excited state lifetimes in the 0.45 - 5.5 microsecond region at room temperature, a significant improvement. In addition, the third generation of photosensitizers are suitable for further symmetric attachment of electron donor and acceptor motifs, and it is shown that the favorable properties are maintained upon the attachment of anchoring groups. The reactivity of the excited state towards light-induced reactions is proved and the photostability is sufficient so the new design strategy has proven successful.</p>

<p>A molecular system capable of photoinduced water splitting is an attractive approach to solar energy conversion. This thesis deals with the functional characterization of molecular building blocks for the three principal functions of such a molecular system: Photoinduced accumulative charge separation, catalytic water oxidation, and catalytic proton reduction. </p><p>Systems combining a ruthenium-trisbipyridine photosensitizer with multi-electron donors in form of dinuclear ruthenium or manganese complexes were investigated in view of the rate constants of electron transfer and excited state quenching. The kinetics were studied in the different oxidation states of the donor unit by combination of electrochemistry and time resolved spectroscopy. The rapid excited state quenching by the multi-electron donors points to the importance of redox intermediates for efficient accumulative photooxidation of the terminal donor.</p><p>The redox behavior of manganese complexes as mimics of the water oxidizing catalyst in the natural photosynthetic reaction center was studied by electrochemical and spectroscopic methods. For a dinuclear manganese complex ligand exchange reactions were studied in view of their importance for the accumulative oxidation of the complex and its reactivity towards water. With the binding of substrate water, multiple oxidation in a narrow potential range and concomitant deprotonation of the bound water it was demonstrated that the manganese complex is capable of mimicking multiple aspects of photosynthetic water oxidation.</p><p>A dinuclear iron complex was investigated as biomimetic proton reduction catalyst. The complex structurally mimics the active site of the iron-only hydrogenase enzyme and was designed to hold a proton on the bridging ligand and a hydride on the iron centers. Thermodynamics and kinetics of the protonation reactions and the electrochemical behavior of the different protonation states were studied in view of their potential catalytic performance.</p>

A molecular system capable of photoinduced water splitting is an attractive approach to solar energy conversion. This thesis deals with the functional characterization of molecular building blocks for the three principal functions of such a molecular system: Photoinduced accumulative charge separation, catalytic water oxidation, and catalytic proton reduction. Systems combining a ruthenium-trisbipyridine photosensitizer with multi-electron donors in form of dinuclear ruthenium or manganese complexes were investigated in view of the rate constants of electron transfer and excited state quenching. The kinetics were studied in the different oxidation states of the donor unit by combination of electrochemistry and time resolved spectroscopy. The rapid excited state quenching by the multi-electron donors points to the importance of redox intermediates for efficient accumulative photooxidation of the terminal donor. The redox behavior of manganese complexes as mimics of the water oxidizing catalyst in the natural photosynthetic reaction center was studied by electrochemical and spectroscopic methods. For a dinuclear manganese complex ligand exchange reactions were studied in view of their importance for the accumulative oxidation of the complex and its reactivity towards water. With the binding of substrate water, multiple oxidation in a narrow potential range and concomitant deprotonation of the bound water it was demonstrated that the manganese complex is capable of mimicking multiple aspects of photosynthetic water oxidation. A dinuclear iron complex was investigated as biomimetic proton reduction catalyst. The complex structurally mimics the active site of the iron-only hydrogenase enzyme and was designed to hold a proton on the bridging ligand and a hydride on the iron centers. Thermodynamics and kinetics of the protonation reactions and the electrochemical behavior of the different protonation states were studied in view of their potential catalytic performance.

This thesis deals with the use of electric fields for evaluation and control of chemical systems. An electric field can result in the flow of charge across an interface between a metal and a solution, by means of chemical reactions. This interplay between electricity and chemistry, i.e. electrochemistry, is a field of crucial importance both within research and industry. Applications based on electrochemical principles encompass such diverse areas as batteries and fuel cells, pH electrodes, and the glucose monitor used by people suffering from diabetes.A major part of the present work concerns the use of static electric fields in solutions containing a non-contacted metal surface. In such a setup it is possible to control the extent of electrochemical reactions at different positions on the metal. This allows the formation and evaluation of various types of gradients on electrodes, via indirectly induced electrochemical reactions. This approach is a new and simple way of forming for instance molecular gradients on conducting surfaces. These are very advantageous in biomimetic research, because a gradient contains a huge amount of discrete combinations of for example two molecules. The basis for the technique is the use of bipolar electrochemistry. Briefly, a surface can become a bipolar electrode (an electrode that acts as both anode and cathode) when the electric field in the solution exceeds a certain threshold value, thereby inducing redox reactions at both ends. In our experiments, the driving force for these reactions will vary along the electrode surface. Since the result of an electrochemical reaction can be the deposition or removal of material from an electrode, bipolar electrochemistry can be used to create gradients of that material on a surface. In order to gain a deeper understanding of these processes, the potential and current density distributions at bipolar electrodes were investigated with different methods. Especially the use of imaging techniques was important for the visualization and analysis of the gradients. Using this knowledge, the formation of more complex gradients was facilitated, and the results were further compared to simulations based on simple conductivity models. These simulations also provided us with means to predict the behavior of new and interesting setup geometries for pattering applications.The other major part is more application driven and deals with the use of alternating electric fields for chemical analysis, a technique known as electrochemical impedance spectroscopy (EIS). In this work, EIS has been applied for the analysis of engine oils and industrial cutting fluids. Emphasis was placed on practical aspects of the measurement procedure, and on the evaluation of the results using statistical methods. It was for example shown that it was possible to simultaneously determine the amount of different contaminants in low conducting solutions. Generally, EIS is used to measure the impedance of a solution or a solid, often as a function of the frequency of the alternating electric field. The impedance of a system is closely correlated to its complex dielectric constant, and EIS can therefor be used to examine many chemical and physical processes. It is further well suited for characterizing low conducting media with little or no redox-active species. The evaluation of impedance data is often a quite complex task, which is why we have made use of statistical methods that drastically reduce the effort and quickly reveal significant intrinsic parameters.

Proton-coupled electron transfer (PCET) is one of the elementary reactions occurring in many chemical and biological systems, such as photosystem II where the oxidation of tyrosine (TyrZ) is coupled to deprotonation of the phenolic proton. This reaction is here modelled by the oxidation of a phenol covalently linked to a Ru(bpy)32+-moitey, which is photo-oxidized by a laser flash-quench method. This model system is unusual as mechanism of PCET is studied in a unimolecular system in water solution. Here we address the question how the nature of the proton accepting base and its hydrogen bond to phenol influence the PCET reaction. In the first part we investigate the effect of an internal hydrogen bond PCET from. Two similar phenols are compared. For both these the proton accepting base is a carboxylate group linked to the phenol on the ortho-position directly or via a methylene group. On the basis of kinetic and thermodynamic arguments it is suggested that the PCET from these occurs via a concerted electron proton transfer (CEP). Moreover, numerical modelling of the kinetic data provides an in-depth analysis of this CEP reaction, including promoting  vibrations  along the O–H–O coordinate that are required to explain the data. The second part describes the study on oxidation of phenol where either water or an external base the proton acceptor. The pH-dependence of the kinetics reveals four mechanistic regions for PCET within the same molecule when water is the base. It is shown that the competition between the mechanisms can be tuned by the strength of the oxidant. Moreover, these studies reveal the conditions that may favour a buffer-assisted PCET over that with deprotonation to water solution.

This Thesis presents studies of molecular association in aqueous solution and at the liquid/solid interface. The investigated molecular systems range from self-aggregating surfactants to hydration water in contact with micelles or individual molecules. In most studies, combinations of various NMR methods were applied. These vary from simple chemical shift and intensity measurements to more elaborate self-diffusion and intermolecular cross-relaxation experiments. Non-ideal mixed micelles of fluorinated and hydrogenated surfactants were studied by an experimental procedure that allows an analysis in terms of micellar structure, using a minimal number of initial assumptions. Quantitative conclusions about micro-phase separation within mixed micelles were obtained within the framework of the regular solution theory. Additionally, NMR was introduced and developed as a powerful method for studying adsorption of surfactants at solid interfaces. Adsorption isotherms for pure and mixed surfactant systems and non-ideal mixing behavior of fluorinated and hydrogenated surfactants at solid surfaces were quantified. Fluorosurfactant-protein association was investigated using the methods described. Intermolecular cross-relaxation rates between solute and solvent molecules were recorded at several different magnetic fields. The results reveal strong frequency dependence for both small molecules and micelles. This finding demonstrates that intermolecular cross-relaxation is not solely controlled by fast local motions, but also by long-range translational dynamics. Data analysis in terms of recently developed relaxation models provides information about the hydrophobic hydration and micellar structure. / QC 20100914

This thesis is about using nuclear magnetic resonance (NMR) spectroscopy for studying soft materials. Soft materials may be encountered everyday by most readers of this thesis, for example when taking a shower or watching TV. The usefulness of these materials originates from them being soft yet, at the same time, having some kind of a structure. The characteristic length scale of those structures is often on the order of nanometers (10-9 m) and the structure can respond to various external stimuli such as temperature, electric and magnetic fields, or the presence of interfaces. NMR spectroscopy excels when studying soft materials because it is a non-invasive technique with a large spectral resolution. Moreover, different NMR methods allow us to study local molecular dynamics or longer-range translational diffusion. Understanding those latter aspects is very important for the development of dynamic and responsive materials. Papers I-III present our work on assessing molecular adsorption on interfaces in colloidal dispersions. Here, carbon nanotubes (CNTs) or silica particles were the colloidal substrates to which proteins, polymers or surfactants adsorbed. Papers IV-VI concern ionic mobility in liquid crystals (LCs). The influence of material structure on, for example, the anisotropy of diffusion or on the association/dissociation of ions was studied in several LC phases. / QC 20110225

To enable future environmentally friendly access to space by means of solid rocket propulsion a viable replacement to the hazardous ammonium perchlorate oxidizer is needed. Ammonium dinitramide (ADN) is one of few such compounds currently known. Unfortunately compatibility issues with many polymer binder systems and unexplained solid-state behavior have thus far hampered the development of ADN-based propellants. Chapters one, two and three offer a general introduction to the thesis, and into relevant aspects of quantum chemistry and polymer chemistry. Chapter four of this thesis presents extensive quantum chemical and spectroscopic studies that explain much of ADN’s anomalous reactivity, solid-state behavior and thermal stability. Polarization of surface dinitramide anions has been identified as the main reason for the decreased stability of solid ADN, and theoretical models have been developed to explain and predict the solid-state stability of general dinitramide salts. Experimental decomposition characteristics for ADN, such as activation energy and decomposition products, have been explained for different physical conditions. The reactivity of ADN towards many chemical groups is explained by ammonium-mediated conjugate addition reactions. It is predicted that ADN can be stabilized by changing the surface chemistry with additives, for example by using hydrogen bond donors, and by trapping radical intermediates using suitable amine-functionalities. Chapter five presents several conceptual green energetic materials (GEMs), including different pentazolate derivatives, which have been subjected to thorough theoretical studies. One of these, trinitramide (TNA), has been synthesized and characterized by vibrational and nuclear magnetic resonance spectroscopy. Finally, chapter six covers the synthesis of several polymeric materials based on polyoxetanes, which have been tested for compatibility with ADN. Successful formation of polymer matrices based on the ADN-compatible polyglycidyl azide polymer (GAP) has been demonstrated using a novel type of macromolecular curing agent. In light of these results further work towards ADN-propellants is strongly encouraged. / QC 20101103

Energy from the sun can be converted to low cost electricity using dye-sensitized solar cells (DSCs). Dye molecules adsorbed to the surface of mesoporous TiO2 absorb light and inject electrons into the semiconductor. They are then regenerated by the reduced redox species from an electrolyte, typically consisting of the iodide/tri-iodide redox couple in an organic solvent. In a solid state version of the DSC, the liquid electrolyte is replaced by an organic hole conductor. Solid state DSCs using 2,2'7,7'-tetrakis-(N,N-di-p-methoxyphenyl-amine)-9,9'-spirobifluorene (spiro-MeOTAD) have reached conversion efficiencies of up to 6 %, which is about half of the efficiency of the best iodide/tri-iodide cells.   Measurement techniques, such as spectroelectrochemistry and photo-induced absorption spectroscopy (PIA), were developed and applied to study the working mechanism of organic dyes in solid state DSCs under solar cell operating conditions. The energy alignment of the different solar cell components was studied by spectroelectrochemistry and the results were compared to photoelectron spectroscopy. PIA was used to study the injection and regeneration processes. For the first time, it was shown here that the results of PIA are influenced by an electric field due to the electrons injected into the TiO2. This electric field causes a shift in the absorption spectrum of dye molecules adsorbed to the TiO2 surface due to the Stark effect.   Taking the Stark effect into consideration during the data analysis, mechanistic differences between solid state and conventional DSCs were found. A perylene dye, ID176, was only able to efficiently inject electrons into the TiO2 in presence of lithium ions and in absence of a solvent. As a result, the sensitiser worked surprisingly well in solid state DSCs but not in liquid electrolyte ones. Regeneration of oxidised dye molecules by spiro-MeOTAD was found to be fast and efficient and spiro-MeOTAD could even reduce excited dye molecules.