As ligações de hidrogênio (LH), fundamentais na determinação da estrutura da água, proteínas, etc., são muito importantes no reconhecimento molecular e nos mecanismos de reações enzimáticas. A determinação da energia das LHs intramoleculares em proteínas e intermoleculares entre uma proteína e o solvente água, porque fornece informações sobre a estrutura secundária, terciária e quaternária das proteínas. Um método para quantificar e qualificar as LHs foi desenvolvido utilizando critérios de distância, geométricos e energéticos a partir das trajetórias obtidas por simulações de dinâmica molecular. O método foi testado com o monômero de uma fosfolipase A2 homodimérica, sem atividade catalítica, isolada do veneno da Bothrops asper(BaspMT-II). No dímero, a análise das LHs mostrou que elas são também essenciais na manutenção da estrutura quaternária. Essa análise permitiu identificar movimentos do tipo dobradiça acompanhados da formação transitória, na interface dimérica, de LHs controladas pelo triptofano na posição 77. Esses movimentos podem estar associados à ação danosa às membranas, uma vez que podem promover a inserção da região C-terminal na membrana. Estudos prévios mostraram que o peptídeo sintético (3Y codificado pelos aminoácidos 115-129 da BaspMT-II) apresenta atividade bactericida e citolítica. Um outro peptídeo (3W), mutante de 3Y, no qual três resíduos tirosina são substituidos por triptofano, apresenta um aumento do dano às membranas e do efeito miotóxico. Os mecanismos de ação desses peptídeos e as suas estruturas foram estudados por dinâmica molecular, dicroísmo circular (DC), microscopia de fluorescência e monocamadas de Langmuir (Mlang). As adsorções dos peptídeos em monocamadas de ácido dimiristoil fosfatídico (DMPA) e dimiristoilfosfatidilcolina (DMPC) se processam por mecanismos diferentes ocasionados pelas diferentes naturezas físico-químicas dos resíduos tirosina e triptofano. A microscopia de fluorescência acoplada a Mlang de DMPA com 3W adsorvido mostra um aumento da fluidez da monocamada, enquanto que o 3Y modifica os domínios do DMPA para pequenas estruturas circulares. Foram realizadas simulações dos peptídeos 3Y e 3W em meio aquoso e nas regiões interfaciais água/n-hexano e água/bicamadas de DMPC. Os resultados confirmam os obtidos por Mlang, demonstrando que os peptídeos interagem diferentemente com as membranas por adotar conformações alternativas definidas previamente. Essas conformações, diferentes das observadas em meio aquoso, dependem da natureza da interface. As estruturas encontradas no final das simulaçoes corroboram o mecanismo proposto por Mlang, assim como as estruturas sugeridas por DC. Isso sugere que a atividade biológica reduzida do peptídeo 3Y ocorre porque os seus dois resíduos Leu se adsorvem na interface sem penetrá-la. Ao contrário de 3W, os resíduos carregados do peptídeo 3Y não estão localizados corretamente para promover uma interação suficientemente atrativa para permitir a sua inserção na membrana celular. / Hydrogen bonds (HB) are highly important in the determination of the structure of the water and proteins. They also play a important role in molecular recognition and in enzyme reaction mechanisms. The determination of protein/water intermolecular and protein intramolecular HB energies provide information with respect to the formation and stabilization of secondary, tertiary and quaternary protein structure. A method that quantifies and qualifies the properties of HB was developed using distance, geometric and energy criteria as applied to data obtained from the atomic trajectories generated by molecular dynamics simulations. The method was tested with a monomer of a catalytically inactive homodimeric phospholipase A2 from Bothrops asper(BaspMT-II) venom. HBs at dimmer interface are essential for maintaining the quaternary structure, and are highly conserved during hinge-like movements of the dimmer. HB formed by tryptophan residue at position 77 controls this movement. These motions can be associated to the membrane damaging action since they facilitate the insertion of the C-terminus into the cellular membrane. Previous studies have shown that synthetic peptide (3Y, coding the amino acids 115-129 of BaspMT-II ) presents bactericidal and cytolitic activities. A peptide variant ( 3W ), in which tyrosine residues were substituted by tryptophan residues, presents an enhanced membrane damaging activity increased miotoxic effect. The mechanism of action of the peptides and their structures were studied by molecular dynamics simulations, circular dichroism (CD), fluorescence microscopy and Langmuir monolayers (Mlang). The adsorption of the peptides on a monolayer composed of dimiristoyl phosphatidic acid (DMPA) and dimiristoylphosphatidyl choline (DMPC) occurs through different processes due to the differences in the physic-chemical nature of the tyrosine and tryptophan residues. Fluorescence microscopy together with Mlang of DMPA with adsorbed 3W indicates an increase of the membrane fluidity while small circular domains are formed with DMPA. Simulations were conducted with the 3Y and 3W peptides in aqueous media, is a water/n-hexane and water/DMPC bilayers. The results confirm the Mlang results, showing that the peptides interact differently with the membranes by adopting alternative previously defined conformations. These two conformations, both of which are different to those observed in water, are dependent of the nature of the interfaces. The final simulated configurations confirm the mechanism proposed by Mlang and the structures proposed by CD. It is suggest that the reduced biological activity of the 3Y peptide is due to the two Leu residues that only adsorb to the cellular membrane without penetrating the bilayer. In contrast to the 3W peptide, no charged residue is correctly located to promote the interaction and insertion of the 3Y peptide into the membrane.

O ácido politiofeno acético (PTAA) é um derivado do politiofeno bastante versátil. Sua solubilidade em alguns solventes orgânicos e em soluções básicas aquosas lhe confere extensa processabilidade na forma de filmes finos, característica importante para dispositivos e sensores. Neste trabalho, investigou-se a formação de filmes de PTAA com as técnicas de automontagem e Langmuir-Blodgett (LB). Os filmes automontados foram preparados com dois policátions, hidrocloreto de poli-alilamina (PAH) e cloreto de poli-dialildimetilamônio (PDAC). O crescimento dos filmes depende do pH das soluções e do tipo de policátion, sugerindo dependência do mecanismo de crescimento com as interações específicas polímeropolímero. A conformação do PTAA em filme tem correlação com sua conformação em solução, apontando para um efeito de memória. Por outro lado, a energia de superfície destes filmes não sofre influência da arquitetura nem dessas diferenças conformacionais. Ou seja, embora o volume do filme possa ser distinto, as superfícies possuem propriedades semelhantes. A morfologia dos filmes foi caracterizada a partir de imagens de AFM utilizando conceitos de geometria fractal e estatística. A dimensão fractal dos filmes é semelhante, indicando o mesmo processo de crescimento dos filmes, independentemente das condições da deposição. Os filmes obtidos em pH ácido tinham tamanho de grão e comprimentos de correlação maiores, sugerindo a deposição de cadeias mais enoveladas. Foi possível fabricar filmes autossustentados sem degradação aparente do material a partir de filmes automontados de PAH/PTAA, entrecruzando termicamente os grupos ácido carboxílico e amina. Este é o primeiro relato de filmes deste tipo com derivado do politiofeno. Os filmes LB de PTAA foram obtidos sem adjuvantes, mas as condições de deposição precisam ser aprimoradas. Para explorar a elevada afinidade química entre compostos contendo enxofre e metais pesados, filmes foram utilizados para detecção espectroscópica e eletroquímica. Espectros de fotoluminescência e UV-Vis demonstraram que os metais interagem apenas com os estados excitados resultando na supressão da fluorescência; no entanto, sem especificidade e apenas para longos períodos de exposição. Espectros de FTIR mostraram a presença dos sais na matriz dos filmes. Por sua vez, voltametrias cíclicas permitiram detectar Pb+2 e Hg+2, mas a irreversibilidade dos processos eletroquímicos, causando alargamento dos picos de oxirredução, inviabiliza a detecção simultânea. / Polythiophene acetic acid (PTAA) is a versatile polythiophene derivative. Its solubility in some organic solvents and in basic aqueous solutions makes it attractive for processing thin films, an important feature for the fabrication of devices and sensors. In this thesis, we investigate the formation of PTAA films using the layer-by-layer (LbL) and the Langmuir- Blodgett (LB) techniques. The LbL films were prepared with poly(allylamine hydrochloride) (PAH) and poly(diallydimethylammonium chloride) (PDAC), with film growth depending on the pH of the solutions and type of polycation, thus indicating that the growth mechanism depends on polymer-polymer interactions. The conformation of the PTAA molecules in solid state was correlated with that in solution, in a kind of memory effect. The surface energy of the films was not affected by the film architecture or different conformations. The film morphology was characterized with AFM images using concepts of fractal geometry and statistics. The fractal dimension was similar for all films, and therefore the overall growth obeys the same process regardless of the deposition conditions. Nevertheless, films obtained at acidic pH exhibited larger grain size and correlation lengths than those produced at basic pHs, suggesting deposition of more coiled chains. It was also possible to fabricate selfsustained films without apparent PTAA degradation from the PAH/PTAA LbL films, upon thermal crosslinking of carboxylic acid and amine groups. This is the first report of such films with a polythiophene derivative. LB films of PTAA were obtained without co-spreading materials, but the deposition conditions need to be optimized. To explore the high chemical affinity between PTAA and compounds containing sulfur and heavy metals, some films were used for spectroscopic and electrochemical detection. The UV-Vis and photoluminescence spectra indicated that the metals affect only the excited states, leading to fluorescence quenching after long exposure times and without specificity for the metals. The FTIR spectra pointed to salts in the films. Pb+2 and Hg+2 ions could be detected using cyclic voltammetry, but their simultaneous detection was hampered by the irreversibility of the electrochemical processes which caused broadening of the oxi-reduction peaks.

[pt] Recentemente, os nanocristais semicondutores, também conhecidos como pontos quânticos, tornaram-se muito atrativos em abordagens de detecção por fotoluminescência devido as suas propriedades ópticas peculiares, tais como fluorescência intensa e com perfil estreito, comprimento de onda máximo ajustável através do controle do tamanho das partículas e maior fotoestabilidade em comparação com os corantes orgânicos convencionais. As nanopartículas sintetizadas foram avaliadas como sondas fotoluminescentes (na forma de dispersão aquosa) para a determinação de captopril, histamina, canamicina e tiroxina (analitos não fotoluminescentes na temperatura ambiente) evitando o uso de procedimentos complexos de derivatização química e permitindo quantificações de forma simples e com sensibilidade. Nanopartículas de CdTe modificadas com o ácido tioglicólico (TGA) e com o ácido 2-mercaptopropiônico (2MPA) e também nanopartículas de ZnS modificadas com L-cisteína foram sintetizadas pela abordagem em fase aquosa coloidal. Estas foram caracterizadas usando métodos microscópicos e espectroscópicos adequados. A fotoluminescência da nanopartícula 2MPA-CdTe foi consideravelmente mais intensa quando na presença de captropil. Sob condições ótimas, o modelo de calibração (isoterma de ligação de Langmuir) foi linear até 4,8 x 10-4 mol L-1 com constante de equilíbrio de ligação de 3,2 x 104 L mol-1 e limite de detecção (LOD) de 6,2 x 10-6 mol L-1 (1,3 (micro)g mL-1). Aplicações em soro sanguíneo humano fortificado com captropil e em formulações farmacêuticas foram demonstradas. A fotoluminescência das nanopartículas de TGA-CdTe foi reduzida (supressão) após adição de diferentes concentrações de histamina seguindo o modelo de Stern- Volmer. A resposta linear cobriu uma faixa de concentração até 5,7 x 10-4 mol L-1, com LOD de 9,6 x 10-6 mol L-1 (1,1 (micro)g mL-1). A abordagem proposta foi utilizada para determinação de histamina em carne de atum. Já a presença de aminoglicosídeos aumentou a fluorescência das nanopartículas de TGA-CdTe (seguindo o modelo da isoterma da adsorção de Langmuir). A kanamicina foi o aminoglicosídeo escolhido para estudar o efeito do aumento da intensidade da fotoluminescência das nanopartículas de TGA-CdTe disperso em solução aquosa. A faixa linear estendeu-se até 8,2 x 10-7 mol L-1 com LOD de 2,5 x 10-8 mol L-1 (14,2 ng mL-1). As constantes de ligação entre diversos aminoglicosídeos e TGACdTe foram calculadas e indicou que existe uma relação entre o número de grupos amino primários disponíveis e o aumento da luminescência. Essa abordagem foi aplicada com sucesso para a análise de amostras de leite e água de riacho, ambos fortificados com kanamicina, usando procedimento de extração em fase sólida com um polímero impresso molecularmente (MIP). A intensidade da fotoluminescência da nanopartícula cisteína-ZnS em solução contendo brometo de cetiltrimetilamônio (CTAB) foi reduzida (quenched) após adição de tiroxina. A redução total do sinal (quenching) seguiu o modelo de Stern-Volmer com resposta linear até 4,0 x 10-6 mol L-1 de concentração do analito, o LOD foi 6,2 x 10-8 mol L-1 (48,3 ng mL-1). A dispersão aquosa da cisteína-ZnS foi usada como sonda óptica para a determinação de tiroxina em formulações farmacêuticas e em saliva humana fortificada com analito. / [en] Recently, semiconductor nanocrystals, also known as quantum dots, have become very attractive for photoluminescence based sensing approaches due to their unique optical properties like intense photoluminescence with narrow profile, maximum wavelength adjustable by the control of particle size and higher photostability in comparison of conventional organic dyes. Different synthesized nanoparticles were evaluated as photoluminescent probes (as aqueous dispersions) for the determination of captopril, histamine, kanamycin and thyroxine (nonphotoluminescent analytes at room-temperature) avoiding the use of complex chemical derivatization procedures and enabling simple and sensitive quantifications. Thioglycolic acid (TGA) and 2-mercapoprionic acid (2MPA) modified CdTe nanoparticles and L-cysteine modified ZnS nanoparticles were synthesized via the colloid aqueous phase route. Their characterization was made using proper microscopic and spectroscopic methods. The emission intensity of 2MPA-Cdte is greatly enhanced in the presence of captopril. Under optimum conditions, the calibration model (Langmuir binding isotherm) was linear up to 4.8 x 10-4 mol L-1 with equilibrium binding constant of 3.2 x 104 L mol-1 and limit of detection (LOD) of 6.2 x 10-6 mol L-1 (1.3 (micro)g mL-1). Applications in captopril fortified human serum and in pharmaceutical formulations were demonstrated. The photoluminescence of TGA-CdTe nanoparticles was quenched by histamine in a concentration dependent manner (Stern-Volmer model). The linear response covered the concentration range up to 5.7 x 10-4 mol L-1 with LOD of 9.6 x 10-6 mol L-1 (1.1 (micro)g mL-1). The proposed method was used for the analysis of tuna fish. The presence of aminoglycosides enhanced the photoluminescence of the TGA-CdTe nanoparticles (following a Langmuir binding isotherm model). Kanamycin was used as a model aminoglycoside in order to study its effect on the photoluminescence enhancement of TGA-CdTe quantum dots dispersed in aqueous solution. The linear range extended up to 8.2 x 10-7 mol L-1 with LOD of 2.5 x 10-8 mol L-1 (14.2 ng mL-1). Binding constants were calculated for several aminoglycosides indicating that there is a relationship between the number of available primary amino groups and the increasing in photoluminescence. This approach was successfully applied for determination of kanamycin fortified milk and in stream water samples after solid phase extraction using a molecular imprinted polymer produced using a kanamycin template. The photoluminescence intensity of cysteine-ZnS in solution containing cetyltrimethyl ammonium bromide (CTAB) was quenched by thyroxine. The overall quenching followed a Stern-Volmer model with linear response coveing an analyte concentration range up to 4.0 x 10-6 mol L-1. LOD was 6.2 x 10-8 mol L-1 (48.3 ng mL-1). The aqueous dispersion of cysteine-ZnS was used as optical probe for the determination of thyroxine in pharmaceutical formulations and in analyte fortified human saliva.

Research on the characterisation and understanding of pulsed magnetron discharges used for the deposition of thin, especially dielectric, films has been carried out between 2003 and 2008 at Chemnitz University of Technology. This thesis is a collection and summary of the original research during this period. In the main part of the thesis, work published in peer-reviewed scientific papers is summarised and yet unpublished results are given in more detail. Different aspects highlighted in the publications are described in a general context of the characterisation of the pulsed discharges for the principal understanding. The cross-linking of the published results is addressed and where necessary extensions to the publications are given. The main part is organised in three sections. In the first one, basics of pulsed magnetron discharges, their application, and important questions are summarised. The second section describes general results and physics of the discharges that have been obtained during the research work. It also emphasises the successful development or modifications of experimental techniques for the time-resolved characterisation. The third section addresses the possibilities to modify and control the process by external parameters that are typically accessible during the application or required by it. An appendix to the thesis comprises selected published research work which is made available as reprints of the original publications. Other publications which are not included as reprints are referenced to in the main part. / Untersuchungen zur Charakterisierung und zum Verständnis gepulster Magnetronentladungen, die zur Abscheidung von dünnen Schichten, besonders von dielektrischen Schichten, verwendet werden, wurden in den Jahren 2003 bis 2008 an der Technischen Universität Chemnitz durchgeführt. Diese Arbeit ist eine Sammlung und Zusammenfassung von neuen Forschungsergebnissen, die in diesem Zeitraum gewonnen wurden. Im Hauptteil der Habilitationsschrift werden die Arbeiten, die in referierten wissenschaftlichen Zeitschriften erschienen sind, zusammengefasst und noch unveröffentlichte Ergebnisse ausführlicher beschrieben. Verschiedene Aspekte, die in den Veröffentlichungen herausgestrichen wurden, werden in einem allgemeinen Zusammenhang der Charakterisierung gepulster Entladungen für ein prinzipielles Verständnis dargestellt. Querverbindungen zwischen den veröffentlichten Ergebnissen werden herausgearbeitet und wo nötig werden Erweiterungen der Originalveröffentlichungen vorgenommen. Der Hauptteil der Habilitationsschrift ist in drei Abschnitte unterteilt. Im ersten Teil werden Grundzüge gepulster Entladungen, ihre Anwendung und wesentliche Fragestellungen zusammengefasst. Der zweite Abschnitt beschreibt allgemeine Ergebnisse und die Physik der Entladungen, die während der Forschungsarbeit herausgearbeitet wurden. Er stellt auch die erfolgreiche Neuentwicklung oder Modifikation von Messtechniken zur zeitaufgelösten Charakterisierung heraus. Der dritte Abschnitt befasst sich mit den Möglichkeiten, den Beschichtungsprozess durch externe Parameter, die typischerweise während der Prozessanwendung zugänglich oder auch erforderlich sind, zu modifizieren und zu steuern. Der Anhang der Schrift beinhaltet ausgewählte Originalveröffentlichungen, die in Form von Reprints zugänglich gemacht werden. Andere Veröffentlichungen, die nicht im Anhang enthalten sind, werden im Hauptteil zitiert.

Research on the characterisation and understanding of pulsed magnetron discharges used for the deposition of thin, especially dielectric, films has been carried out between 2003 and 2008 at Chemnitz University of Technology. This thesis is a collection and summary of the original research during this period. In the main part of the thesis, work published in peer-reviewed scientific papers is summarised and yet unpublished results are given in more detail. Different aspects highlighted in the publications are described in a general context of the characterisation of the pulsed discharges for the principal understanding. The cross-linking of the published results is addressed and where necessary extensions to the publications are given. The main part is organised in three sections. In the first one, basics of pulsed magnetron discharges, their application, and important questions are summarised. The second section describes general results and physics of the discharges that have been obtained during the research work. It also emphasises the successful development or modifications of experimental techniques for the time-resolved characterisation. The third section addresses the possibilities to modify and control the process by external parameters that are typically accessible during the application or required by it. An appendix to the thesis comprises selected published research work which is made available as reprints of the original publications. Other publications which are not included as reprints are referenced to in the main part. / Untersuchungen zur Charakterisierung und zum Verständnis gepulster Magnetronentladungen, die zur Abscheidung von dünnen Schichten, besonders von dielektrischen Schichten, verwendet werden, wurden in den Jahren 2003 bis 2008 an der Technischen Universität Chemnitz durchgeführt. Diese Arbeit ist eine Sammlung und Zusammenfassung von neuen Forschungsergebnissen, die in diesem Zeitraum gewonnen wurden. Im Hauptteil der Habilitationsschrift werden die Arbeiten, die in referierten wissenschaftlichen Zeitschriften erschienen sind, zusammengefasst und noch unveröffentlichte Ergebnisse ausführlicher beschrieben. Verschiedene Aspekte, die in den Veröffentlichungen herausgestrichen wurden, werden in einem allgemeinen Zusammenhang der Charakterisierung gepulster Entladungen für ein prinzipielles Verständnis dargestellt. Querverbindungen zwischen den veröffentlichten Ergebnissen werden herausgearbeitet und wo nötig werden Erweiterungen der Originalveröffentlichungen vorgenommen. Der Hauptteil der Habilitationsschrift ist in drei Abschnitte unterteilt. Im ersten Teil werden Grundzüge gepulster Entladungen, ihre Anwendung und wesentliche Fragestellungen zusammengefasst. Der zweite Abschnitt beschreibt allgemeine Ergebnisse und die Physik der Entladungen, die während der Forschungsarbeit herausgearbeitet wurden. Er stellt auch die erfolgreiche Neuentwicklung oder Modifikation von Messtechniken zur zeitaufgelösten Charakterisierung heraus. Der dritte Abschnitt befasst sich mit den Möglichkeiten, den Beschichtungsprozess durch externe Parameter, die typischerweise während der Prozessanwendung zugänglich oder auch erforderlich sind, zu modifizieren und zu steuern. Der Anhang der Schrift beinhaltet ausgewählte Originalveröffentlichungen, die in Form von Reprints zugänglich gemacht werden. Andere Veröffentlichungen, die nicht im Anhang enthalten sind, werden im Hauptteil zitiert.

Hur elektrolytlösningar interagerar med laddade ytor är viktigt för många fenomen. I detta arbete undersöktes samspelet mellan flera joner med en negativt laddad yta som exponerade sulfonat funktionella grupper mot lösning. Särskild vikt lades på deprotoneringsbeteendet vid ytan. Samspelet mellan olika joner och sulfonatgruppen hade inte tidigare beaktats ur ett molekylärt perspektiv. Här användes ett Langmuir-monolager bestående av dokosan-1-sulfonsyra deponerat på olika elektrolytlösningar som modellsystem. För att studera molekylära interaktioner mellan ytan och elektrolyterna användes Vibrational Sum Frequency Spectroscopy (VSFS). Denna inneboende ytkänsliga teknik gör det möjligt att observera små förändringar i vibrationsenergier i sulfonagruppen vid kontakt med olika joner, här hydronium, litium, natrium och cesium. Ett av huvudsyftena med detta arbete var att jämföra de experimentellt bestämda parametrarna med teoretiska modeller av det elektriska dubbelskiktet vid laddade gränssnitt, såsom Gouy-Chapman-teorin och andra mer avancerade Poisson-Boltzmann-baserade modeller, för att utforska deras lämplighet och gränser av giltighet. Docosan-1-sulfonsyra packades snyggt i monolager, med packningstätheten ökande med starkare jonstyrka I underfasen. Två toppar i vibrationsspektra sågs för sulfonatgruppen, den symmetriska och asymmetriska sträckningen vid 1048 cm-1 respektive 1150 cm-1. Dessa band sågs blåskiftas vid bindning av litium- och natriummotjoner. Amplituden för den symmetriska sträckningen kunde kopplas direkt till mängden laddade arter. Den teoretiska Gouy-Chapman-modellen var tillräcklig att användas för relativt låga ytpotentialer (<|150mV|). För högre potentialer var motjonens storlek nödvändig att inkludera i modellen för mer exakta förutsägelser. Sulfonsyrans surhetsgrad uppmättes till att vara pKa=-1.8±0.4 och bindningskonstanterna för olika hårda joner till den sulfonatfunktionella gruppen uppskattades vara pKLi=0 och pKNa=-0.7. Däremot binder den mjuka jonen, cesium, inte till sulfonatgruppen. Implikationen är att sulfonatgruppen bör betraktas som en hård jon I enlighet med Collins lag om matchande vattenaffiniteter. / How electrolyte solutions interact with charged surfaces is essential for many phenomena in physics, chemistry and biology. In this work, the interactions of several ions with a negatively charged surface exposing sulfonate functional groups to solution were investigated. Specific emphasis was made on the deprotonation behaviour at the surface. The interplay between different ions and the sulfonate moiety had not been previously considered from a molecular perspective.  Here, a Langmuir monolayer consisting of docosane-1-sulfonic acid deposited on top of different electrolyte solutions was used as model system. To study the molecular interactions between the surface and the electrolytes, Vibrational Sum Frequency Spectroscopy (VSFS) was used. This intrinsically surface sensitive technique allows observing small changes in vibrational energies of the sulfonate functional group when in contact with different ionic species, here hydronium, lithium, sodium and cesium. One of the main objectives of this work was to compare the experimentally determined parameters with theoretical models of the electric double layer at charged interfaces, such as the Gouy-Chapman theory and other more advanced Poisson-Boltzmann based models, to explore their suitability and limits of validity. Docosane-1-sulfonic acid packed nicely into monolayers, with the packing density increasing with stronger ionic strength in the subphase. Two peaks in the vibrational spectra were seen for the sulfonate functional group, the symmetric and asymmetric stretch at 1048 cm-1 and 1150 cm-1, respectively. These bands were seen to blue-shift upon binding of lithium and sodium counterions. The amplitude of the symmetric stretch could be directly linked to the amount of charged species. The Gouy-Chapman theoretical model was adequate to use for relative low surface potentials (<|150mV|). For higher potentials, the size of the counterion was necessary to include in the model for more accurate predictions. The acidity of the sulfonic acid was measured to be pKa=-1.8±0.4 and the binding constants for different hard ions to the sulfonate functional group were estimated to be pKLi=0 and pKNa=-0.7. In contrast, the soft ion, cesium, does not bind to the sulfonate. The implication is that the sulfonate moiety should be considered a hard ion in accordance with Collins law of matching water affinities.

Au cours de ce travail, nous nous sommes intéressés à l'élaboration de cristaux photoniques colloïdaux d'architecture contrôlée afin d'étudier leur effet sur les spectres de photoluminescence de luminophores. Notre stratégie a été d'incorporer les émetteurs au sein des particules de silice composant les cristaux colloïdaux de façon à les répartir de manière homogène dans l'ensemble des matériaux. Nous présentons la synthèse des précurseurs minéraux et l'élaboration de cristaux colloïdaux d'épaisseur contrôlée à la couche près grâce à la technique de Langmuir-Blodgett. Ces structures sont caractérisées par une bande interdite qui affecte la propagation de la lumière. L'insertion d'une couche de particules de diamètre différent dans un cristal colloïdal induit l'apparition d'une bande passante au sein de la bande interdite. Nous avons ainsi étudié l'influence de la structure de cristaux avec et sans défaut(s) sur les spectres d'émission de différents luminophores. Nous avons observé une inhibition et une exaltation locale de la lumière émise dans les zones spectrales correspondant respectivement aux bandes stoppante et passante. Nous avons également observé des modifications réversibles des spectres de photoluminescence des émetteurs, lorsque ceux-ci sont incorporés au sein de cristaux colloïdaux dont les propriétés optiques peuvent être modulées via l'application d'un stimulus extérieur.

<p>In the research presented in this licentiate thesis the surface specific technique Vibrational Sum Frequency Spectroscopy, VSFS, combined with the Langmuir trough has been utilized to investigate Langmuir monolayers and Langmuir-Blodgett (LB) deposited mono- and bilayers of phospholipids. Their molecular structure, stability, and hydration were probed to gain additional understanding of important properties aiming at facilitating the use of such layers as model systems for biological membranes.</p><p>VSFS was applied to <em>in situ</em> studies of the degradation of Langmuir monolayers of 1,2-diacyl-phosphocholines with identical C-18 chains having various degrees of unsaturation. The time-dependent change of the monolayer area at constant surface pressure as well as the sum frequency intensity of the vinyl-CH stretch at the C=C double bonds were measured to monitor the degradation. It was shown that a rapid degradation of the monolayers of unsaturated phospholipids occurred when exposed to the laboratory air compared to the fully saturated lipid, and that the degradation could be inhibited by purging the ambient air with nitrogen. The degradation was attributed to oxidation mediated by reactive species in the air.</p><p>The molecular structure and order of Langmuir monolayers of 1,2-distearoyl-phosphocholine (18:0 PC) and their hydrating water were investigated at different surface pressures using VSFS. The spectroscopic data indicated a well ordered monolayer at all surface pressures with a more intense signal at higher pressures attributed to the subsequent increase of the number density and more ordered lipid molecules due to the tighter packing. Water molecules hydrating the headgroups or being in contact with the hydrophobic parts were observed and distinguished by their vibrational frequencies, and found to have different average orientations.</p><p>Additionally, monolayers of 18:0 PC, its fully deuterated analogue, and 1,2-distearoyl-phosphoserine (18:0 PS) were Langmuir-Blodgett (LB) deposited on CaF₂ substrates and VSFS was used to investigate the structure and order of the films as well as the hydrating water. The CH-region, water region, and lower wavenumber region containing phosphate, ester, carboxylic acid, and amine signals were probed to obtain a complete picture of the molecule. The data indicates that all deposited monolayers formed a well ordered and stable film and the average orientation of the aliphatic chains was determined using the antisymmetric methyl stretch.</p> / <p>I forskningen som presenteras i denna licentiatavhandling har den ytspecifika vibrationssumfrekvensspektroskopin, VSFS, använts tillsammans med Langmuirtråget för att studera Langmuir-monolager och Langmuir-Blod-gett (LB) deponerade monolager och bilager av fosfolipider. För att utvidga förståelsen av egenskaper som är viktiga för att underlätta användandet av dem som modellsystem för biologiska membran undersöktes såväl deras molekylära struktur som stabilitet och hydratisering.</p><p>VSFS användes för att genomföra <em>in situ</em>-studier av nedbrytningen av Langmuir-monolager av 1,2-diacyl-fosfokoliner med identiska 18 kolatomer långa sidokedjor med varierande antal omättade kol-kol-bindningar. För att övervaka nedbrytningen mättes såväl den tidsberoende förändringen av monolagernas area vid konstant yttryck som sumfrekevensintensiteten från dubbelbindningarnas CH-vibration. När monolagerna bestående av omättade fosfolipider utsattes för laboratorieluften bröts de ner hastigt jämfört med det helt mättade monolagret. Denna nedbrytning som sannolikt orsakades av reaktiva ämnen i luften kunde inhiberas fullständigt genom att ersätta den omgivande luften med kvävgas.</p><p>Den molekylära strukturen och ordningen hos Langmuir-monolager av 1,2-distearoyl-fosfokolin (18:0 PC) och deras hydratiseringsvatten undersöktes vid olika yttryck med VSFS. Den spektroskopiska datan visar att monolagerna är välordnade vid alla yttryck samt att sumfrekvenssignalens styrka ökar med ökande yttryck på grund av såväl det större antalet molekyler per ytenhet som den högre ordningen då molekylerna packas tätare. Vattenmolekyler som hydratiserar huvudgrupperna eller är i kontakt med hydrofoba delar och har olika medelorientering observerades och kunde identifieras genom sina vibrationsfrekvenser.</p><p>Vidare deponerades monolager av 18:0 PC, dess fullt deuterade analog och 1,2-distearoyl-fofsfoserin (18:0 PS) på substrat av CaF₂ och VSFS användes för att undersöka filmernas struktur och ordning såväl som hydratiseringsvattnet. CH- och vattenregionerna samt lågvågtalsområdet som innehåller fosfat-, ester-, karboxylsyra- och aminsignaler undersöktes för att få en fullständig bild av den molekylära strukturen. Data visar att alla deponerade monolager bildade en välordnad och stabil film och kolvätekedjornas medelorientering bestämdes med hjälp av signalen från den antisymmetriska metylvibrationen.</p> / QC 20100924

No description available.

No description available.