Die Weiterentwicklung klassischer, elektronischer Identifikationstechnologien leistet einen wichtigen Beitrag zum technischen Fortschritt in Industrie, Logistik und Gesundheitswesen. Die vorliegende Dissertationsschrift beschreibt die Entwicklung eines Dual-Feed-Antennendesigns für passive UHF-RFID-Transponder auf kritischen Oberflächen. Die zu Grunde liegende Antennenstruktur besteht aus einem Microstrip-Patch unter Verwendung eines verlustarmen Substratmaterials. Dieser erfährt eine Optimierung hinsichtlich seiner Lesereichweite, insbesondere auf kritischen Oberflächen. Ein Zwei-Port-Konzept mit gekoppeltem Feed-Line-Anpassnetzwerk reduziert die Anzahl benötigter, diskreter Komponenten und ermöglicht eine kostengünstige Herstellung mittels klassischer Ätzverfahren. Verschiedene Ansätze zur Modellierung und zur analytischen Berechnung der Antennenparameter werden dargestellt. Des Weiteren erfolgt eine Verifikation der Antennenstruktur anhand eines Konzepts für einen passiven Energy-Harvesting-RFID-Transponder, der zur Temperaturüberwachung in den genannten Branchen eingesetzt werden kann. Dieses Konzept schließt ein effizientes Energiemanagement mittels eines Ultra-Low-Power-Mikrocontrollers sowie Ansätze zur Energiegewinnung und -speicherung mit ein und stellt die Wahl wichtiger Systemparameter und Bauelemente anhand anwendungsspezifischer Abschätzungen dar.

Ce manuscrit présente une méthode d’imagerie quantitative et sans état de référence, de défauts de corrosion d’une plaque mince, exploitant de manière passive un réseau embarqué de capteurs d’ondes élastiques guidées. Les applications visées sont le contrôle santé intégré (SHM) de structures critiques qui amènent de fortes contraintes à la fois d’intrusivité des capteurs et de fiabilité du diagnostic. Une solution prometteuse, permettant de multiplier la densité de points de mesure sans augmenter l’intrusivité du système, est offerte par les réseaux de Bragg sur fibre optique (FBG). Toutefois, contrairement aux transducteurs piézoélectriques (PZT) classiquement employés en SHM, les FBG ne permettent pas d’émettre d’ondes élastiques. L’idée consiste à utiliser des méthodes dites « passives » permettant de retrouver la fonction de Green entre deux capteurs à partir du bruit ambiant, naturellement présent dans la structure, mesuré simultanément entre ces deux capteurs. Nous étudions dans ce manuscrit deux méthodes passives : la corrélation de bruit et le filtre inverse passif. Nous verrons que ce dernier a plus de potentiel lorsqu’il est couplé à l’imagerie par tomographie. Différents algorithmes de tomographie sont évalués par simulation numérique puis lors d’expériences comparatives actives et passives à l’aide d’un réseau de PZT. Afin de rendre la tomographie passive robuste, nous présentons une méthode clé de détection de temps de vol, basée sur une représentation temps-fréquence. Enfin, nous décrivons une première démonstration expérimentale de mesures passives par FBG qui laisse à penser que la tomographie passive par FBG est prometteuse. / This manuscript presents a baseline-free quantitative method for the imaging of corrosion flaws present in thin plates. This method only requires an embedded guided waves sensors network in a fully passive way. The field ofapplications are Structural Health Monitoring (SHM) of critical structures with heavy constrains on both sensors intrusiveness and diagnostic reliability. A promising solution allowing to increase the number of measurement points without increasing the intrusiveness of the system is provided by the Fiber Bragg Gratings (FBGs). However, unlike piezoelectric transducers generally used in SHM, the FBGs cannot emit elastic waves. The idea consists in using passive methods in order to retrieve the Green function from elastic diffuse fields - naturally present in structures - measured simultaneously between two sensors. In this manuscript, two passive methods are studied: the ambient noise correlation and the passive inverse filter. It is shown that the latter gives better results when coupled with tomography. Several tomography algorithms are assessed with numerical simulations and then applied to active and passive datasets measured by a PZT network. In order to make passive tomography robust, a time of flight identification method is proposed, based on a time-frequency representation. Finally, a novel experimental demonstration of passive measurements with FBGs only is presented, suggesting high potential for FBGs passive tomography.

Ce mémoire presente une synthèse de travaux de recherche consacrés à l'analyse de problèmes mathématiques issus de la mécanique des fluides. En particulier, par le mélange de modélisation, d'analyse théorique et numérique d' équations aux dérivées partielles ainsi que de calcul scientifique, les champs applicatifs de ces travaux ont porté essentiellement sur deux grandes thématiques : la mécanique des films minces et les biosciences. Cette synthèse s'articule autour de trois chapitres : 1) la lubrification hydrodynamique, 2) les lois de conservation scalaires sur un domaine borné et 3) la modélisation mathématique appliquée aux sciences du vivant qui présente, à son tour, deux axes distincts : la modélisation du système respiratoire et, en particulier, des échanges gazeux dans l'arbre bronchique et la simulation de suspensions biomimétiques actives ou passives dans un fluide de Stokes.

A new technology for biotechnological treatment of mine waters with both high concentrations of heavy metals and sulphate was developed. The technology is based on the technical coupling of microbially mediated hydrolysis, fermentation and microbial sulphate reduction in a self-stabilising process. Electron donor for sulphate reduction is supplied by degradation of a solid substrate (silage). Elimination of metals is primarily achieved by sulphide precipitation within the sulphate reduction zone. The organic compounds are either supplied by elution or by hydrolysis of polymeric compounds which was named active elution. The concept was realised as a two-phase process with (active) elution in the first phase (R1) and sulphate reduction and metal elimination in the second phase (R2). With this process setup the supply of sufficient amounts of electron donor in R1, a stable and effective sulphate reduction yield as the basis of metal elimination in R2 and a stable separation of microbial processes in R1 and R2 was achieved at hydraulic retention times of 69 h in R1 and 40 h in R2. Almost complete elimination of heavy metals was achieved from wastewaters with 0.2 mM Ni2+, Cu2+, Zn2+, Fe2+ and Mn2. A structurised mathematical model describing the two-phase process was developed on the basis of literature values and tested with data from continuous experiments. Microbial processes were significantly influenced in the presence of precipitated heavy metal sulfides. The effect was dependent on both the bound metal (Ni2+ or Fe2+) and the relative distance between sediment and biomass. / Es wurde eine neuartige Technologie zur biotechnologischen Reinigung von schwermetallbelasteten, sulfathaltigen Bergbauwässern entwickelt. Die Technologie basiert auf der technischen Kopplung von mikrobiell vermittelter Hydrolyse, Fermentation und mikrobieller Sulfatreduktion in einem selbststabilisierenden Prozess, wobei aus Abbau eines festen Substanzgemisches (Silage) Elektronendonor zur Sulfatreduktion bereitgestellt wird. Die Schwermetallelimination erfolgt vorrangig durch sulfidische Fällung, die technisch einstufig mit der mikrobiellen Sulfatreduktion realisiert wurde. Die organischen Verbindungen wurden durch Elution bereitgestellt bzw. durch hydrolytischen Abbau von polymeren Verbindungen. Hierfür wurde der Begriff der ?Aktiven Elution? geprägt. Die Konzeption wurde technisch zweistufig umgesetzt. In der ersten Stufe (R1) erfolgt die (Aktive) Elution, in der zweiten Stufe (R2) erfolgen Sulfatreduktion und Schwermetallelimination. Mit der verfahrenstechnischen Umsetzung wurde die Bereitstellung einer ausreichenden Menge an Elektronendonor in R1, eine effektive und stabile Sulfatreduktionsausbeute als Bedingung der Schwermetallelimination in R2 und eine weitgehende Trennung der mikrobiellen Prozesse in R1 und R2 bei Verweilzeiten von 69 h in R1 und 40 h in R2 erreicht. Bei Behandlung von wässrigen Lösungen mit 0,2 mM Ni2+, Cu2+, Zn2+, Fe2+ und Mn2+ konnte eine nahezu vollständige Elimination der Schwermetalle aus der Lösung erreicht werden. Es wurde ein strukturiertes mathematisches Modell für den zweistufigen Prozess auf der Basis von Literaturangaben entwickelt und anhand der kontinuierlichen Laborversuche überprüft. Es wurde ein erheblicher Einfluss schwermetallsulfidischer Präzipitate auf die mikrobiellen Prozesse festgestellt. Dabei wurde dieser Einfluss in Abhängigkeit von der Art der gebundenen Metallionen (Ni2+ oder/und Fe2+) und in Abhängigkeit der relativen räumlichen Anordnung von Sediment und Biomasse festgestellt.

Les applications grand public comme la téléphonie mobile ou les cartes bancaires manipulent des données confidentielles. A ce titre, les circuits qui les composent font de plus en plus l'objet d'attaques qui présentent des menaces pour la sécurité des données. Les concepteurs de systèmes sur puce (SoC) doivent donc proposer des solutions sécurisées, tout en limitant le coût et la complexité globale des applications. L’analyse des attaques existantes sur les circuits numériques nous a orienté vers celles se basant sur la tension d'alimentation, dans des nœuds technologiques avancés.Dans un premier temps, nous avons déterminé la signature électrique d’un circuit en phase de conception. Pour cela, un modèle électrique a été proposé, prenant en compte la consommation en courant et la capacité de la grille d'alimentation. L'extraction de ces paramètres ainsi que l'évaluation du modèle sont présentées. L’utilisation de ce modèle a permis de mesurer la vulnérabilité d’un circuit mais aussi d’évaluer quantitativement des contremesures, notamment celle utilisant des capacités de découplage. Ensuite, l’étude se consacre à l’injection de fautes par impulsions de tension d’alimentation. Les mécanismes d’injection de fautes sur des circuits numériques ont été étudiés. Dès lors, des solutions de détection d’attaques ont été proposées et évaluées à la fois en simulation et par des tests électriques sur circuit. Les résultats ont permis de confirmer les analyses théoriques et la méthodologie utilisée.Ce travail a ainsi montré la faisabilité de solutions à bas coût contre les attaques actives et passives en tension, utilisables dans le cadre d’un développement industriel de produits. / General use products as mobile phones or smartcards manipulate confidential data. As such, the circuits composing them are more and more prone to physical attacks, which involve a threat for their security. As a result, SoC designers have to develop efficient countermeasures without increasing overall cost and complexity of the final application. The analysis of existing attacks on digital circuits leads to consider power attacks, in advanced technology nodes.First of all, the power signature of a circuit was determined at design time. To do so, an electrical model was suggested based on the current consumption and the overall power grid capacitance. The methodology to extract these parameters, as well as the evaluation of the model are presented. This model allows designers to anticipate information leakage at design time and to quantify the protection of countermeasures, as the use of integrated decoupling capacitors. Then, the study was dedicated to power glitch attacks. The different fault injection mechanisms were analyzed in details. From then on, a set of detection circuits were suggested and evaluated at design time and on silicon by electrical tests. Both the theoretical analysis and the given methodology were confirmed by the test campaigns.This work demonstrated that the design of low-cost solutions against passive and active power attacks can be achieved, and used in a large scale product development.

Predictive coding theorizes the capacity of neural structures to form predictions about forthcoming sensory events based on previous sensory input. This concept increasingly gains attention within experimental psychology and cognitive neuroscience. In auditory research, predictive coding has become a useful model that elegantly explains different aspects of auditory sensory processing and auditory perception. Many of these aspects are backed up by experimental evidence. However, certain fundamental features of predictive auditory processing have not been addressed so far by experimental investigations, like correlates of neural predictions that show up before the onset of an expected event. Four experiments were designed to investigate the proposed mechanism under more realistic conditions as compared to previous studies by manipulating different aspects of predictive (un)certainty, thereby examining the ecological validity of predictive processing in audition. Moreover, predictive certainty was manipulated gradually across five conditions from unpredictable to fully predictable in linearly increasing steps which drastically decreases the risk of discovering incidental findings. The results obtained from the conducted experiments partly confirm the results from previous studies by demonstrating effects of predictive certainty on ERPs in response to omissions of potentially predictable stimuli. Furthermore, results partly suggest that the auditory system actively engages in stimulus predictions in a literal sense as evidenced by gradual modulations of pre-stimulus ERPs associated with different degrees of predictive certainty. However, the current results remain inconsistent because the observed effects were relatively small and could not consistently be replicated in all follow-up experiments. The observed effects could be regained after accumulating the data across all experiments in order to increase statistical power. However, certain questions remain unanswered regarding a valid interpretation of the results in terms of predictive coding. Based on the current state of results, recommendations for future investigations are provided at the end of the current thesis in order to improve certain methodological aspects of investigating predictive coding in audition, including considerations on the design of experiments, possible suitable measures to investigate predictive coding in audition, recommendations for data acquisition and data analysis as well as recommendations for publication of results.

Predictive coding theorizes the capacity of neural structures to form predictions about forthcoming sensory events based on previous sensory input. This concept increasingly gains attention within experimental psychology and cognitive neuroscience. In auditory research, predictive coding has become a useful model that elegantly explains different aspects of auditory sensory processing and auditory perception. Many of these aspects are backed up by experimental evidence. However, certain fundamental features of predictive auditory processing have not been addressed so far by experimental investigations, like correlates of neural predictions that show up before the onset of an expected event. Four experiments were designed to investigate the proposed mechanism under more realistic conditions as compared to previous studies by manipulating different aspects of predictive (un)certainty, thereby examining the ecological validity of predictive processing in audition. Moreover, predictive certainty was manipulated gradually across five conditions from unpredictable to fully predictable in linearly increasing steps which drastically decreases the risk of discovering incidental findings. The results obtained from the conducted experiments partly confirm the results from previous studies by demonstrating effects of predictive certainty on ERPs in response to omissions of potentially predictable stimuli. Furthermore, results partly suggest that the auditory system actively engages in stimulus predictions in a literal sense as evidenced by gradual modulations of pre-stimulus ERPs associated with different degrees of predictive certainty. However, the current results remain inconsistent because the observed effects were relatively small and could not consistently be replicated in all follow-up experiments. The observed effects could be regained after accumulating the data across all experiments in order to increase statistical power. However, certain questions remain unanswered regarding a valid interpretation of the results in terms of predictive coding. Based on the current state of results, recommendations for future investigations are provided at the end of the current thesis in order to improve certain methodological aspects of investigating predictive coding in audition, including considerations on the design of experiments, possible suitable measures to investigate predictive coding in audition, recommendations for data acquisition and data analysis as well as recommendations for publication of results.:1. Introduction ... 5 1.1 An introduction to predictive coding theory ... 9 1.2 Predictive coding in audition ... 11 1.3 Electrophysiological correlates of predictive auditory processing ... 14 1.4 Limitations of previous research and aims of the thesis ... 21 2. Traditional correlates of auditory prediction ... 24 2.1 Experiment 1: Reliability of auditory predictions ... 25 2.2 Experiment 2: Accuracy of auditory predictions ... 39 3. Pre-stimulus correlates of auditory prediction ...47 3.1 Pre-stimulus effects in Experiment 1 and 2 ... 48 3.2 Experiment 3: Temporal dynamics of auditory prediction ... 56 3.3 Experiment 4: The influence of omissions on stimulus processing ... 64 4 Results across experiments ... 74 4.1 Methods ... 76 4.2 Results ... 80 4.3 Discussion ... 82 5. General Discussion ... 87 5.1 Implications for current research ... 89 5.2 Recommendations for future investigations ... 93 5.3 Future prospects ... 101 5.4 Conclusion ... 104 References ...106 Appendix ... 116

A new technology for biotechnological treatment of mine waters with both high concentrations of heavy metals and sulphate was developed. The technology is based on the technical coupling of microbially mediated hydrolysis, fermentation and microbial sulphate reduction in a self-stabilising process. Electron donor for sulphate reduction is supplied by degradation of a solid substrate (silage). Elimination of metals is primarily achieved by sulphide precipitation within the sulphate reduction zone. The organic compounds are either supplied by elution or by hydrolysis of polymeric compounds which was named active elution. The concept was realised as a two-phase process with (active) elution in the first phase (R1) and sulphate reduction and metal elimination in the second phase (R2). With this process setup the supply of sufficient amounts of electron donor in R1, a stable and effective sulphate reduction yield as the basis of metal elimination in R2 and a stable separation of microbial processes in R1 and R2 was achieved at hydraulic retention times of 69 h in R1 and 40 h in R2. Almost complete elimination of heavy metals was achieved from wastewaters with 0.2 mM Ni2+, Cu2+, Zn2+, Fe2+ and Mn2. A structurised mathematical model describing the two-phase process was developed on the basis of literature values and tested with data from continuous experiments. Microbial processes were significantly influenced in the presence of precipitated heavy metal sulfides. The effect was dependent on both the bound metal (Ni2+ or Fe2+) and the relative distance between sediment and biomass. / Es wurde eine neuartige Technologie zur biotechnologischen Reinigung von schwermetallbelasteten, sulfathaltigen Bergbauwässern entwickelt. Die Technologie basiert auf der technischen Kopplung von mikrobiell vermittelter Hydrolyse, Fermentation und mikrobieller Sulfatreduktion in einem selbststabilisierenden Prozess, wobei aus Abbau eines festen Substanzgemisches (Silage) Elektronendonor zur Sulfatreduktion bereitgestellt wird. Die Schwermetallelimination erfolgt vorrangig durch sulfidische Fällung, die technisch einstufig mit der mikrobiellen Sulfatreduktion realisiert wurde. Die organischen Verbindungen wurden durch Elution bereitgestellt bzw. durch hydrolytischen Abbau von polymeren Verbindungen. Hierfür wurde der Begriff der ?Aktiven Elution? geprägt. Die Konzeption wurde technisch zweistufig umgesetzt. In der ersten Stufe (R1) erfolgt die (Aktive) Elution, in der zweiten Stufe (R2) erfolgen Sulfatreduktion und Schwermetallelimination. Mit der verfahrenstechnischen Umsetzung wurde die Bereitstellung einer ausreichenden Menge an Elektronendonor in R1, eine effektive und stabile Sulfatreduktionsausbeute als Bedingung der Schwermetallelimination in R2 und eine weitgehende Trennung der mikrobiellen Prozesse in R1 und R2 bei Verweilzeiten von 69 h in R1 und 40 h in R2 erreicht. Bei Behandlung von wässrigen Lösungen mit 0,2 mM Ni2+, Cu2+, Zn2+, Fe2+ und Mn2+ konnte eine nahezu vollständige Elimination der Schwermetalle aus der Lösung erreicht werden. Es wurde ein strukturiertes mathematisches Modell für den zweistufigen Prozess auf der Basis von Literaturangaben entwickelt und anhand der kontinuierlichen Laborversuche überprüft. Es wurde ein erheblicher Einfluss schwermetallsulfidischer Präzipitate auf die mikrobiellen Prozesse festgestellt. Dabei wurde dieser Einfluss in Abhängigkeit von der Art der gebundenen Metallionen (Ni2+ oder/und Fe2+) und in Abhängigkeit der relativen räumlichen Anordnung von Sediment und Biomasse festgestellt.

The multi-conductor lossy transmission-line model and finite element simulation tool are used to analyze the high-frequency attenuator and the DM transmission-line EMI filter. The insertion gain, transfer gain, current distribution, and input impedance of the filter under a nominal design are discussed. In order to apply the transmission-line EMI filter to power electronics systems, the performance of the filter under different dimensions, material properties, and source and load impedances must be known. The influences of twelve parameters of the DM transmission-line EMI filter on the cut-off frequency, the roll-off slope, and other characteristics of the insertion gain and transfer gain curves are investigated. The most influential parameters are identified. The current sharing between the copper and nickel conductors under different parameters are investigated. The performance of the transmission-line EMI filter under different source and load impedances is also explored. The measurement setups of the DM transmission-line EMI filter using a network analyzer have been discussed. The network analyzer has a common-ground problem that influences the measured results of the high-frequency attenuator. However, the common-ground problem has a negligible influence on the measured results of the DM transmission-line EMI filter. The connectors and copper strips between the connectors and the filter introduce parasitic inductance to the measurement setup. Both simulated and measured results show that transfer gain curve is very sensitive to the parasitic inductance. However, the insertion gain curve is not sensitive to the parasitic inductance. There are two major methods to reduce the parasitic inductance of the measurement setup: using small connectors and applying a four-terminal measurement setup. The transfer gain curves of three measurement setups are compared: the two-terminal measurement setup with BNC connectors, the two-terminal measurement setup with Sub Miniature version B (SMB) connectors, and the four-terminal measurement setup with SMB connectors. The four-terminal measurement setup with SMB connectors is the most accurate one and is applied for all the transfer gain measurements in this dissertation. This dissertation also focuses on exploring ways to improve the performance of the DM transmission-line EMI filter. Several improved structures of the DM transmission-line EMI filter are investigated. The filter structure without insulation layer can greatly reduce the thickness of the filter without changing its performance. The meander structure can increase the total length of the filter without taking up too much space and results in the cut-off frequency being shifted lower and achieving more attenuation. A prototype of the two-dielectric-layer filter structure is built and measured. The measurement result confirms that a multi-dielectric-layer structure is an effective way to achieve a lower cut-off frequency and more attenuation. This dissertation proposes a broadband DM EMI filter combining the advantages of the discrete reflective LC EMI filter and the transmission-line EMI filter. Two DM absorptive transmission-line EMI filters take the place of the two DM capacitors in the discrete reflective LC EMI filter. The measured insertion gain of the prototype has a large roll-off slope at low frequencies and large attenuation at high frequencies. The dependence of the broadband DM EMI filter on source and load impedances is also investigated. Larger load (source) impedance gives more attenuation no matter it is resistive, inductive or capacitive. The broadband DM EMI filter always has more high-frequency attenuation than the discrete reflective LC EMI filter under different load (source) impedances. / Ph. D.