Spelling suggestions: "subject:"roadmaping"" "subject:"roadmapping""
1 |
Motorcycle Cornering Improvement : An Aerodynamical Approach based on Flow InterferenceSedlak, Vojtech January 2012 (has links)
A new aerodynamic device, based on flow interference effects, is studied in order to significantly improve the cornering performance of racing motorcycles in MotoGP. After a brief overview on why standard downforce devices cannot be used on motorcycles, the new idea is introduced and a simplified mechanic analysis is provided to prove its effectiveness. The concept is based on the use of anhedral wings placed on the front fairing, with the rider acting as an interference device, aiming to reduce the lift generation of one wing. Numerical calculations, based on Reynolds-averaged Navier-Stokes equations, are performed on simplified static 2D and 3D cases, as a proof of concept of the idea and as a preparation for further analysis which may involve experimental wind-tunnel testing. The obtained results show that the flow interference has indeed a significant impact on the lift on a single wing. For some cases the lift can be reduced by 70% to over 90% - which strengthens the possibility of a realistic implementation. / Ett nytt aerodynamisk koncept som nyttjar effekter av flödesinterferenser är utvärderat i syfte att på ett noterbart sätt förbättra en roadracing-motorcykels kurtagningsmöjligheter. Efter en kort genomgång av varför diverse klassiska "downforce" lösningar ej är applicerbara på motorcyklar, presenteras det nya konceptet. Varpå en mekanisk analys genomförs i syfte att se över dess tillämpbarhet. Konceptet bygger på anhedrala vingar som placeras på den främre kåpan, där föraren agerar som ett interferensobjekt, och försöker störa ut lyftkraften som den ena vingen genererar. Numeriska beräkningar baserade på RANS-ekvationer är utförda i förenklade statiska 2D och 3D fall. Som ett vidare steg rekommenderas vindtunneltester. Resultaten visar att flödesinterferenser är ytterst märkbara för vingar och i vissa fall kan lyftkraften reducerats med 70-90%. Detta förstäker möjligheten för en realistisk implementering.
|
2 |
Additive Manufacturing Applications for Suspension Systems : Part selection, concept development, and designWaagaard, Morgan, Persson, Johan January 2020 (has links)
This project was conducted as a case study at Öhlins Racing AB, a manufacturer of suspension systems for automotive applications. Öhlins usually manufacture their components by traditional methods such as forging, casting, and machining. The project aimed to investigate how applicable Additive Manufacturing (AM) is to manufacture products for suspension systems to add value to suspension system components. For this, a proof of concept was designed and manufactured. The thesis was conducted at Öhlins in Upplands Väsby via the consultant firm Combitech. A product catalog was searched, screened, and one part was selected. The selected part was used as a benchmark when a new part was designed for AM, using methods including Topology Optimization (TO) and Design for Additive Manufacturing (DfAM). Product requirements for the chosen part were to reduce weight, add functions, or add value in other ways. Methods used throughout the project were based on traditional product development and DfAM, and consisted of three steps: Product Screening, Concept Development, and Part Design. The re-designed part is ready to be manufactured in titanium by L-PBF at Amexci in Karlskoga. The thesis result shows that at least one of Öhlin's components in their product portfolio is suitable to be chosen, re-designed, and manufactured by AM. It is also shown that value can be added to the product by increased performance, in this case mainly by weight reduction. The finished product is a fork bottom, designed with hollow structures, and is ready to print by L-PBF in a titanium alloy.
|
Page generated in 0.0387 seconds