O carbeto de silício (SiC) é um semicondutor com propriedades adequadas para substituir o silício em dispositivos eletrônicos em aplicações que exijam alta potência, alta frequência e/ou alta temperatura. Além disso, é possível crescer termicamente um filme de dióxido de silício (SiO2) sobre o SiC de maneira análoga ao silício. Porém, esses filmes apresentam maior densidade de defeitos eletricamente ativos na região interfacial SiO2/SiC que no caso do SiO2/Si, o que limita a qualidade dos dispositivos formados. Assim, compreender a origem da degradação elétrica e desenvolver métodos para passivar os defeitos na região interfacial SiO2/SiC são importantes passos para o desenvolvimento da tecnologia do SiC. Buscando uma melhor compreensão da natureza dos defeitos presentes na região interfacial SiO2/SiC, a interação de estruturas SiO2/SiC com vapor d’água enriquecido isotopicamente (D2 18O) e a interação com monóxido de carbono (CO), um dos subprodutos da oxidação térmica do SiC, foram investigadas. Observou-se que a interação com CO gera cargas positivas na estrutura e que a incorporação de deutério proveniente da água é fortemente dependente da rota de formação do filme de SiO2. Sabendo que a incorporação de nitrogênio e de fósforo na região interfacial SiO2/SiC são eficientes métodos para reduzir o número de defeitos eletricamente ativos nessa região, investigou-se a incorporação de nitrogênio em estruturas de SiC através de tratamentos térmicos em amônia enriquecida isotopicamente (15NH3) e desenvolveu-se um novo método de incorporação de fósforo, fazendo sua deposição por pulverização catódica (sputtering) Os métodos de incorporação propostos resultaram em maiores quantidades de nitrogênio e de fósforo na região interfacial SiO2/SiC do que os encontrados na literatura, tornando-os promissores candidatos na passivação elétrica do SiC. Além da caracterização físico-química utilizando diferentes técnicas, também foi feita a caracterização elétrica de capacitores Metal-Óxido-Semicondutor (MOS) testando filmes de SiO2 obtidos por sputtering ou por crescimento térmico. Adicionalmente, desenvolveu-se uma rota de síntese de padrões de 18O mais estáveis ao longo do tempo para serem utilizados em análises por reação nuclear. Também foi proposta uma metodologia de quantificação de fósforo via análise por reação nuclear. Dos resultados obtidos neste doutorado, uma melhor compreensão da natureza e da origem dos defeitos presentes na região interfacial SiO2/SiC foi alcançada. Também obteve-se uma melhor compreensão de como os elementos passivadores nitrogênio e fósforo interagem nessa região. / Silicon carbide (SiC) is a semiconductor with adequate properties to substitute silicon in electronic devices in applications that require high power, high frequency, and/or high temperature. Besides, a silicon dioxide (SiO2) film can be thermally grown on SiC in a similar way to that on Si. However, these films present higher density of electrical defects in the SiO2/SiC interfacial region when compared to the SiO2/Si interface, which limits the quality of the fabricated devices. Thus, it is important to understand the origin of the electrical degradation and to develop methods to passivate the defects in the SiO2/SiC interfacial region in order to develop the SiC technology. Aiming at a better understanding of the nature of defects at the SiO2/SiC interfacial region, the interaction of SiO2/SiC structures with water vapor isotopically enriched (D2 18O) and the interaction with carbon monoxide (CO), one of the SiC thermal oxidation by-products, were investigated. It was observed that the interaction with CO generates positive charges in the structure and that the deuterium incorporation from the water vapor is strongly dependent on the formation route of the SiO2 film. Knowing that nitrogen and phosphorous incorporation in the SiO2/SiC interfacial region are efficient methods to reduce the number of electrical defects in this region, the nitrogen incorporation in SiC structures by isotopically enriched ammonia (15NH3) annealings was investigated and a new method to incorporate phosphorous, by sputtering deposition was developed The proposed incorporation methods resulted in higher amounts of nitrogen and phosphorous then those found in literature, making them promising candidates to the electrical passivation of SiC. Besides the physico-chemical characterization using different techniques, the electrical characterization of Metal-Oxide-Semiconductor (MOS) capacitors was also performed, testing SiO2 films obtained by sputtering deposition or thermally grown. Additionally, a route to synthesize 18O standards for nuclear reaction analyses that are more stable over time was developed. Besides, a methodology to quantify phosphorous by nuclear reaction analysis was proposed. From the results obtained in this PhD thesis, a better understanding of the nature and the origin of defects present in the SiO2/SiC interfacial region was obtained, as well as a better understanding on how the passivating elements nitrogen and phosphorous interact in this region.

O carbeto de silício (SiC) é um semicondutor com propriedades adequadas para substituir o silício em dispositivos eletrônicos em aplicações que exijam alta potência, alta freqüência e/ou temperatura. Além disso, um filme de dióxido de silício (SiO2) pode ser crescido termicamente sobre o SiC de maneira análoga a sobre silício, permitindo que a tecnologia já existente para a fabricação de dispositivos utilizando Si possa ser adaptada para o caso do SiC. No entanto, filmes crescidos termicamente sobre SiC apresentam maior densidade de defeitos eletricamente ativos na região interfacial SiO2/SiC que no SiO2/Si. Assim, compreender a origem e os parâmetros que afetam essa degradação elétrica é um importante passo para a tecnologia do SiC. A primeira parte deste trabalho teve como objetivo compreender o efeito de parâmetros de oxidação (pressão de oxigênio e tempo de oxidação) no crescimento térmico de filmes de dióxido de silício sobre substratos de carbeto de silício. As oxidações foram realizadas em ambiente rico em 18O2 e a influência na taxa de crescimento térmico dos filmes de Si18O2 e nas espessuras das regiões interfaciais formadas entre o filme dielétrico e o substrato foram investigadas utilizando análises por reação nuclear. Para correlacionar as modificações nas propriedades investigadas com as propriedades elétricas das amostras, estruturas metal-óxidosemicondutor foram fabricadas e levantamento de curvas corrente-voltagem e capacitânciavoltagem foi realizado. Com isso, pretendeu-se melhor compreender a origem da degradação elétrica gerada pela oxidação térmica no SiC. Observou-se que a taxa de crescimento térmico dos filmes de SiO2 depende de um parâmetro dado pelo produto do tempo de oxidação e da pressão de oxigênio, para as condições testadas. O deslocamento da tensão de banda plana com relação ao valor ideal mostrou-se igualmente dependente desse parâmetro, indicando que uma maior degradação elétrica na região interfacial SiO2/SiC ocorrerá conforme o filme fica mais espesso devido ao aumento dos parâmetros investigados. Não observaram-se modificações nas espessuras da região interfacial SiO2/SiC e na tensão de ruptura dielétrica dos filmes de SiO2 atribuídas aos parâmetros de oxidação testados. Na segunda parte deste trabalho, visando minimizar a degradação elétrica da região interfacial SiO2/SiC gerada pela oxidação térmica do SiC, propôs-se crescer termicamente, em uma condição mínima de oxidação, um filme muito fino e estequiométrico de SiO2, monitorado por espectroscopia de fotoelétrons induzidos por raios X. Para formar filmes mais espessos de SiO2 e poder fabricar estruturas MOS, depositaram-se filmes de SiO2 por sputtering. As espessuras e estequiometria dos filmes depositados foram determinadas por espectrometria de retroespalhamento Rutherford com ou sem canalização. As estruturas MOS em que o filme fino de SiO2 foi crescido termicamente antes da deposição apresentaram menor deslocamento da tensão de banda plana com relação ao valor ideal e maior tensão de ruptura dielétrica do que as amostras em que o filme foi apenas crescido termicamente ou apenas depositado, confirmando a minimização da degradação elétrica da região interfacial SiO2/SiC pela rota proposta. O efeito de um tratamento térmico em ambiente inerte de Ar nas estruturas também foi investigado. Observou-se uma degradação elétrica na região interfacial SiO2/SiC devido a esse tratamento. Análises por reação nuclear indicaram que o filme fino crescido termicamente não permaneceu estável durante o tratamento térmico, perdendo oxigênio para o ambiente gasoso e misturando os isótopos de oxigênio do filme crescido termicamente com o do filme depositado. / Silicon carbide (SiC) is a semiconductor with adequate properties to substitute silicon in electronic devices in applications that requires high power, high frequency, and/or high temperature. Besides, a silicon dioxide (SiO2) film can be thermally grown on SiC in a similar way to that on Si, allowing that technology already used to fabricate devices based on Si to be adapted to the SiC case. However, the oxide films thermally grown on SiC present higher density of electrical defects at the SiO2/SiC interfacial region when compared to the SiO2/Si. Thus, the understanding of the origin and what parameters affect the electrical degradation is an important step to the SiC technology. The first part of this work aimed to understand the effect of oxidation parameters (oxygen pressure and oxidation time) in the thermal growth of silicon dioxide films on silicon carbide substrates. The oxidations were performed in an 18O2 rich ambient and the influence on the growth rate of the Si18O2 films and on the interfacial region thickness formed between the dielectric film and the substrate were investigated using nuclear reaction analyses. To correlate the modifications observed in these properties with modifications in the electrical properties, metal-oxide-semiconductors structures were fabricated and current-voltage and capacitancevoltage curves were obtained. The aim was to understand the origin of the electrical degradation due to the thermal oxidation of silicon carbide. It was observed that the growth rate of the Si18O2 films depends on the parameter given by the product of the oxygen pressure and the oxidation time, under the conditions tested. The flatband voltage shift with respect to the ideal value was also influenced by the same parameter, indicating that a larger electrical degradation in the SiO2/SiC interfacial region will occur as the film becomes thicker due to the increase of the values of the investigated parameters. No modifications were observed in the SiO2/SiC interfacial region thickness and in the dielectric breakdown voltage of the SiO2 films that could be attributed to the oxidation parameters tested. In the second part of this work, in order to minimize electrical degradation due to thermal oxidation of silicon carbide, a stoichiometric SiO2 film with minimal thickness was thermally grown, monitored by X-ray photoelectron spectroscopy. To obtain thicker films and to fabricate MOS structures, a SiO2 film was deposited by sputtering. The thicknesses and stoichiometries of the deposited films were determined by Rutherford backscattering spectrometry using or not the channeling geometry. The MOS structures in which a thin film was thermally grown before the deposition presented smaller flatband voltage shift and higher breakdown voltage when compared to SiO2 films only thermally grown or only deposited directly on SiC, confirming that the electrical degradation in the SiO2/SiC interfacial region was minimized using the proposed route. The effect of one thermal treatment in argon in the structures was also investigated. An electrical degradation in the SiO2/4H-SiC interface was observed. Nuclear reaction analyses indicated that the thin film thermally grown was not stable during the annealing, loosing O to the gaseous ambient and mixing O isotopes of the thermally grown film with those of the deposited film.

L'objectif de cette thèse est l'étude des conséquences de la thermo-oxydation sur la structure chimique et le comportement mécanique d'un Ethylène Propylène Diène Monomère (EPDM). Afin de déterminer les modifications à différentes échelles structurales, quatre formulations modèles sont étudiées : la gomme pure, les matrices vulcanisées stabilisée et non stabilisée et l'élastomère industriel. L'ensemble des échantillons est vieilli entre 70 et 170°C dans l'air ou sous vide puis caractérisé par divers outils analytiques. La thermogravimétrie donne accès aux variations de masse résultant de l'incorporation d'oxygène et l'émission de composés volatils. L'analyse infrarouge permet de suivre les évolutions des espèces chimiques. Les essais de gonflement, de chromatographie et de spectrométrie mécanique permettent de calculer les nombres de coupures de chaînes et d'actes de réticulation à chaque instant. Sur la base de ces résultats, un modèle cinétique général de thermo-oxydation de la matrice EPDM est proposé et en partie validé. Les conséquences du vieillissement thermique sur le comportement mécanique de l'élastomère industriel sont mises en évidence par des essais de traction uniaxiale et de multi-relaxation à température ambiante et vitesse de déformation initiale de 10-3 s-1. L'impact du vieillissement thermique sur les propriétés ultimes et les réponses à l'équilibre et hors équilibre est examiné. Un critère prédictif de rupture basé sur la mécanique de la rupture est proposé. Enfin, le couplage vieillissement thermique - contrainte mécanique est étudié par des essais relaxation de contraintes continues entre 130 et 170°C dans l'air. Les modifications de la microstructure pendant le vieillissement thermique sont intégrées dans les équations constitutives du modèle mécanique macroscopique afin de proposer un outil de prédiction du comportement à long terme de l'élastomère industriel. La simulation numérique montre une bonne adéquation avec les résultats expérimentaux. / The aim of this work is to study the consequences of the thermal oxidation on the chemical structure and mechanical behavior of an Ethylene-Propylene-Diene Monomer (EPDM). In order to determine the structural changes at different scales, four model formulations have been considered: free additive gum, stabilized and unstabilized vulcanized matrix and industrial rubber. All samples were aged between 70 and 170°C in air or vacuum and characterized by several analytical tools. Thermogravimetry gives access to weight variations due to oxygen grafting and volatile compounds release. Infrared analysis is used to follow chemical species evolutions. Swelling tests, chromatographic and mechanical spectrometry tests allow calculating the number of chain scission and cross-linking events at any time. Based on these results, a general kinetic model is proposed and partially validated for EPDM matrix thermal oxidation. The consequences of thermal ageing on the mechanical behavior of the industrial rubber are pointed out by monotonic tensile and stress relaxation tests at room temperature and a 10-3 s-1- initial strain rate. The impact of thermal ageing on ultimate properties and equilibrium and non-equilibrium response are examined. Finally, the coupling between thermal ageing and mechanical stress is studied by continuous stress relaxation tests between 130 et 170°C in air. The microstructural modifications during thermal ageing are introduced into the constitutive equations of the macroscopic mechanical model in order to propose a predictif tool of the long time behavior of the industrial rubber. The numerical simulation is in good agreement with experimental results.

Binary oxides constitute an outstanding class of functional materials with potential applications in many fields such as catalysis, gas sensing, field emission, solar cells, photodetection, etc. Due to the difference in their physical/chemical properties, different oxides have been explored for different applications. For examples, SnO2, Cr2O3 and ZnO are being explored for gas sensing due to their high adsorption capacity for volatile gases, ZnO, Cu2O etc. are being explored in solar cells because of high adsorption coefficient in UV/visible region and so on. Various techniques are available for synthesis of binary oxides and tuning their properties. Most of the physical or chemical synthesis techniques are expensive, need high cost instruments and produces hazardous chemical waste. We need a simple, cost effective and ecofriendly techniques for the synthesis of binary oxides. In present work, a simple and facile thermal oxidation strategy has been employed for the synthesis of various binary oxides (Cu2O, GeO2 and ZnO). For example, CuO nanorods are obtained when Cu is heated around ~ 500 oC, which then heated in Ar atmosphere to obtain a film of porous Cu2O. Similarly, GeO2 with different morphologies and green-luminescent ZnO are obtained by controlling the reaction parameters. These oxides have then been explored for various applications including white light phosphors, catalysis for the degradation of dyes and non-contact thermometry. Overall, we present a thermal oxidation strategy for the synthesis of various binary oxides and explore potential applications in various fields.

Thermal oxidation of silicon belongs to the most decisive steps in microelectronic fabrication because it allows creating electrically insulating areas which enclose electrically conductive devices and device areas, respectively. Deal and Grove developed the first model (DG-model) for the thermal oxidation of silicon describing the oxide thickness versus oxidation time relationship with very good agreement for oxide thicknesses of more than 23 nm. Their approach named as general relationship is the basis of many similar investigations. However, measurement results show that the DG-model does not apply to very thin oxides in the range of a few nm. Additionally, it is inherently not self-consistent. The aim of this paper is to develop a self-consistent model that is based on the continuity equation instead of Fick’s law as the DG-model is. As literature data show, the relationship between silicon oxide thickness and oxidation time is governed—down to oxide thicknesses of just a few nm—by a power-of-time law. Given by the time-independent surface concentration of oxidants at the oxide surface, Fickian diffusion seems to be neglectable for oxidant migration. The oxidant flux has been revealed to be carried by non-Fickian flux processes depending on sites being able to lodge dopants (oxidants), the so-called DOCC-sites, as well as on the dopant jump rate.

This diploma thesis is focused on the design of technological modifications of the existing industrial unit „waste-to-energy“, used for thermal treatment of process waste gases containing VOC and CO while flue gas is produced. The main objective of the existing unit modification is to improve its operating parameters considering economy, ecology and energy utilization. In the first part, the current industrial plant was presented with all necessary process data. Furthermore, all the key equipment used for the waste gases treatment or for the utilization of waste heat was identified. In the main part of the thesis there are performed modifications of the existing unit including the technology of existing heat exchangers intensification, the design of new and more efficient heat exchangers and finally the catalytic oxidation technology implementation for the decomposition of pollutants contained in the waste gas. The result of the thesis is a technical, economic and ecological comparison of the proposed technological modifications with the existing operation.

Fatigue and fracture assisted by the environment are responsible for the majority of failures in implants. Due to low tribological properties of titanium alloys, the thermal oxidation technique has been evaluated to improve the surface hardness and consequently, to improves the tribological properties of Ti6Al4V alloy. However, despite improved tribological properties of the Ti6Al4V alloy, there is a tendency to reduction of the fatigue limit of the oxide layer. The combined action of body fluid and cyclic loads also need to be investigated. This study evaluated the effect of thermal oxidation in the fatigue limit of the Ti6Al4V in environment containing 0.9% NaCl. It was observed a reduction in the fatigue limit for thermally oxidized Ti6Al4V alloy and it is suggested that the reduction in fatigue properties of alloy is associated with the brittleness of oxide layer. / Os processos de fadiga e fraturas assistidas pelo ambiente são responsáveis pela maioria das falhas em implantes. Devido às baixas propriedades tribológicas do titânio e suas ligas, a técnica de oxidação térmica tem ganhado destaque por conferir um aumento da dureza superficial e consequentemente melhorar as propriedades tribológicas da liga Ti6Al4V. Entretanto apesar da melhoria das propriedades tribológicas existe uma tendência na redução do limite de fadiga quando há presença de uma camada de óxido na superfície da liga Ti6Al4V. Ainda a ação combinada de fluidos corpóreos e de carregamento precisa ser investigada. Neste estudo foi avaliado o efeito da oxidação térmica combinado a aplicação de carregamento cíclico ao ar e em meio contendo 0,9 % NaCl. Foi observada uma redução no limite de resistência à fadiga para a liga Ti6Al4V oxidada termicamente. O meio contendo 0,9 % de NaCl não influenciou significativamente a resistência em fadiga de corpos de prova oxidados termicamente e sugere-se que a redução nas propriedades de fadiga da liga está associada à fragilidade da camada de óxido.

The following is the accepted manuscript of the original article: Marcel Melzer, Thomas Waechtler, Steve Müller, Holger Fiedler, Sascha Hermann, Raul D. Rodriguez, Alexander Villabona, Andrea Sendzik, Robert Mothes, Stefan E. Schulz, Dietrich R.T. Zahn, Michael Hietschold, Heinrich Lang and Thomas Gessner “Copper oxide atomic layer deposition on thermally pretreated multi-walled carbon nanotubes for interconnect applications”, Microelectron. Eng. 107, 223-228 (2013). Digital Object Identifier: 10.1016/j.mee.2012.10.026 Available via http://www.sciencedirect.com or http://dx.doi.org/10.1016/j.mee.2012.10.026 © 2013 Elsevier B.V. Carbon nanotubes (CNTs) are a highly promising material for future interconnects. It is expected that a decoration of the CNTs with Cu particles or also the filling of the interspaces between the CNTs with Cu can enhance the performance of CNT-based interconnects. The current work is therefore considered with thermal atomic layer deposition (ALD) of CuxO from the liquid Cu(I) β-diketonate precursor [(nBu3P)2Cu(acac)] and wet oxygen at 135°C. This paper focuses on different thermal in-situ pre-treatments of the CNTs with O2, H2O and wet O2 at temperatures up to 300°C prior to the ALD process. Analyses by transmission electron microscopy show that in most cases the CuxO forms particles on the multi-walled CNTs (MWCNTs). This behavior can be explained by the low affinity of Cu to form carbides. Nevertheless, also the formation of areas with rather layer-like growth was observed in case of an oxidation with wet O2 at 300°C. This growth mode indicates the partial destruction of the MWCNT surface. However, the damages introduced into the MWCNTs during the pre treatment are too low to be detected by Raman spectroscopy.

No description available.