Syftet med mitt arbete är att ta reda på och förklara vad fingerstyle respektive modern fingerstyle är. Jag gjorde det genom att analysera och spela utvald musik från genren modern fingerstyle. Efter analysen komponerade jag en låt med flera speltekniska komponenter som jag anser definierar genren modern fingerstyle. Jag kom under arbetes gång underfund med att fingerstyle är en gitarrteknik som beskriver ett sätt man spelar gitarr på. Modern fingerstyle beskriver en genre där speciella tekniker och ett progressivt sound har en central roll. Jag lärde mig flera moderna tekniker som var helt okända för mig innan arbetets start. Jag lärde mig också att skriva en låt på ett snabbare sätt än jag är van vid, eftersom jag redan innan komponeringsstarten bestämde vissa parametrar som skulle vara med i låten. Mitt arbete kan ge utökad information till den som vill veta vad fingerstyle och modern fingerstyle är.

This master thesis deals with stress-strain analysis of carpometacarpal (CMC) thumb joint. It is a preliminary study, which was not analysed on BUT Mechanical and biomechanical institute yet. There is a comparative stress-strain analysis of CMC with applied total endoprosthesis and physiological condition. The model of geometry was created based on CT images and processed with using software Catia and Solidworks. The problem was solved in numerical FEM (finite element method) in software Ansys 13.0

<p>Due to changes in the economy, the Department of Defense is requiring dramatic changes in its procurement process for major systems. These changes attempt to leverage from the large quantity of commercial software that is currently on the. market. As a result, better estimating techniques are required to properly account for software reuse. For government agencies, these techniques must be understood and applied when validating and tracking contractor performance. An industry survey was performed and subsequently two techniques were evaluated. The evaluation criteria used is consistent with the attributes of the systems engineering process. This project will evaluate the two most widely used; function point analysis and rule of thumb analysis were selected for computing the cost of a specified software intensive project.</p> / Master of Science

Introduction Malignant diseases with infiltration of bony structures in the area of the phalanges or metacarpals require either amputation or complex reconstruction. The decision for reconstruction means to restore length, mobility, sensibility, stability as well as aesthetics. Methods We present a case of complex first ray reconstruction of the left hand using a free osteocutaneous lateral arm flap from the ipsilateral side. The reconstruction was performed after radical resection of an exulcerated squamous cell carcinoma, including the first metacarpal bone, trapezium, partial trapezoid and distal scaphoid as well as partial resection of the extensor pollicis longus, extensor pollicis brevis, abductor pollicis longus and flexor carpi radialis tendons. The osteosynthetic restoration was achieved distally by a double wire cerclage and a proximally by temporary K-wire suspension. Moreover, to reconstruct the extensor pollicis longus tendon the ipsilateral palmaris longus tendon was harvested and used. Postoperatively, a secondary humerus fracture occurred, which was initially attended by plate osteosynthesis. The fracture showed delayed healing, which was treated by re-plating and autologous cancellous bone. Results 12 months postoperatively, the patient showed an excellent outcome with length preservation and good range of motion, sensibility, stability and aesthetic of the thumb. Furthermore, the quarterly tumor aftercare showed no evidence of recurrence. Conclusion This case report showed that the free osteocutaneous lateral arm flap is a reliable solution for the reconstruction of the first ray with a great functional and aesthetic outcome. To prevent a secondary humerus fracture, a preventive plate osteosynthesis simultaneous with the osteocutaneous flap elevation should be considered.

Contribution of daylight to employees in terms of health, productivity, and overall wellness in the office spaces are undeniable. Apart from the psychological and biological benefits of employees, embracing daylight in office spaces increases the energy-efficiency of the building which leads to the sustainable development of a city. However, a considerable number of employees in Sweden lack daylight in their workspaces according to a report by the Swedish Work Environment Authority [Arbetsmiljöverket (Swedish)] (Lowden, 2019). Professionals like Architects, Lighting Designers, and students of architecture and lighting design across Sweden were asked their opinions pertaining to lack of daylight in a considerable number of office spaces in Sweden based on their experience through online questionnaires/ interviews to get to know the overview of this subject. Out of all the possible reasons, window design and economy were the two macro factors according to them that influenced daylight in an office building in Sweden but often, obstruction angle in a building due to urban densification is overlooked when it comes to daylight in an office building. This thesis discusses the influence of obstruction angles with an illustrated office building in Stockholm. Diva for Rhino was the software used for the modelling and daylight simulation.

Designing architecture is related to producing vast amounts of information based on constraints, experience or common sense, and at the same time, those designs are assisted by specialized software, but, are the results of those processes giving you advantage or are they leading you in the wrong way? For example, should you include shading elements or less glazing? Should you change the shape of the building or improve envelope specifications? This research is a start to understand how to approach to design problems related to solar geometry, recognize which variables are worth modifying, reduce potential of error when iterating, and take truly advantage of the output delivered by modeling tools. / Master of Architecture

1. Può un Modello DSGE spiegare una disinflazione costosa? Questo lavoro mostra che un modello DSGE non è in grado di spiegare una disinflazione costosa con indicizzazione parziale e bassa dei prezzi e dei salari. Il modello invece è in grado di replicare una disinflazione recessiva sostituendo il meccanismo di modellizazione delle rigidità nominali di Calvo (1983) con quello di Rotemberg (1982). 2. Disinflazione e Diseguaglianza in un Modello Monetario DSGE: Un’Analisi di Welfare Questo lavoro analizza gli effetti redistributivi di una politica disinflazionistica in un modello DSGE con Partecipazione Limitata ai Mercati degli Assets. Due sono i meccanismi che guidano a distribuzione del consumo e del reddito: il markup delle imprese e il cosiddetto vincolo cash in advance. I risultati suggeriscono che la disinflazione aumenta inequivocabilmente la diseguaglianza con il meccanismo di Rotemberg. Invece con il meccanismo di Calvo questo effetto viene ottenuto soltanto se le imprese non sono costrette ad indebitarsi per finanziare il fattore lavoro. 3. Consolidamento Fiscale e Consumatori Rule of Thumb Questo lavoro simula un esperimento di consolidamento fiscale in un modello DSGE con partecipazione limitata ai mercati degli assets. I risultati mostrano che durante un processo di consolidamento fiscale riduzioni temporanee delle tasse o aumenti temporanei di transfers consentono sia di ridurre il debito che stimolare il consumo. / 1. Can a DSGE Model Explain a Costly Disinflation? This paper shows that a medium scale DSGE model fails to explain a costly disinflation with low and partial indexation of prices and wages. Alternatively to Calvo (1982) price setting, with the Rotemberg (1982) framework the model can replicate a recessionary disinflation for any indexation degree. 2. Disinflation and Inequality in a DSGE Monetary Model: A Welfare Analysis This paper investigates the redistributive effects of a disinflation experiment in a standard DSGE model with Limited Asset Market Participation. There are two key mechanisms driving consumption and income distribution: firms’ markup and the cash in advance channel. Results show that disinflation unambiguously increases inequality under Rotemberg. Under Calvo this effect only obtains if the cash in advance doesn’t bind firms ability to finance their working capital. 3. Fiscal Consolidation and Rule of Thumb Consumers: Gain With or Without Pain? This paper simulates a fiscal consolidation in a medium scale DSGE model augmented with Limited Asset Market Participation. Results show that during the consolidation process temporary tax reductions or temporary transfer increases allow to both reduce public debt and boost consumption. A countercyclical monetary policy is an effective complement to fiscal policy as stabilization tool.

<p>This study, based on daily recordings of infant feeding, comprised 506 infants from Uppsala, Sweden. All mothers had had previous breastfeeding experience of at least 4 months, and were planning to breastfeed the index child for ≥6 months.</p><p>Among exclusively breastfed infants there were wide variations in breastfeeding frequency and suckling duration per 24 hours both between infants and in the individual infant over time in the first 6 months. Most infants had an average of 1.0-2.9 feeds per night. Infants using a pacifier had fewer feeds and a shorter total suckling duration per 24 hours, and stopped breastfeeding earlier than infants not using a pacifier. These associations were not found for thumb sucking.</p><p>Accustoming the infants to solids was a lengthy process, the longer the younger the infant at introduction, and was associated with small changes in pattern and duration of breastfeeding. In contrast, formula was usually given in large amounts from the beginning, and when formula was given regularly the daily breastfeeding frequency and suckling duration declined swiftly. The younger an infant at the start of regular formula feeds, the shorter the breastfeeding duration. Occasional formula feeds did not affect the breastfeeding duration.</p><p>It is important for health personnel and parents to keep in mind that exclusively breastfed infants are not a homogeneous group, but rather members of distinct 'breastfeeding entities'. Moreover, if the aim is to introduce other foods 'under the protection of breast milk' it is important to realise that formula is also 'another food' and needs to be treated as such.</p>

This study, based on daily recordings of infant feeding, comprised 506 infants from Uppsala, Sweden. All mothers had had previous breastfeeding experience of at least 4 months, and were planning to breastfeed the index child for ≥6 months. Among exclusively breastfed infants there were wide variations in breastfeeding frequency and suckling duration per 24 hours both between infants and in the individual infant over time in the first 6 months. Most infants had an average of 1.0-2.9 feeds per night. Infants using a pacifier had fewer feeds and a shorter total suckling duration per 24 hours, and stopped breastfeeding earlier than infants not using a pacifier. These associations were not found for thumb sucking. Accustoming the infants to solids was a lengthy process, the longer the younger the infant at introduction, and was associated with small changes in pattern and duration of breastfeeding. In contrast, formula was usually given in large amounts from the beginning, and when formula was given regularly the daily breastfeeding frequency and suckling duration declined swiftly. The younger an infant at the start of regular formula feeds, the shorter the breastfeeding duration. Occasional formula feeds did not affect the breastfeeding duration. It is important for health personnel and parents to keep in mind that exclusively breastfed infants are not a homogeneous group, but rather members of distinct 'breastfeeding entities'. Moreover, if the aim is to introduce other foods 'under the protection of breast milk' it is important to realise that formula is also 'another food' and needs to be treated as such.

One of the most devastating effects of tetraplegia is the inability to grasp and manipulate everyday objects necessary to living an independent life. Currently surgery is widely accepted as the solution to improve hand functionality. However, surgery becomes difficult when the user has paralysed wrists as is the case with C5 tetraplegia. The aim of this research was to develop a solution which provided controlled wrist flexion and extension which, when combined with surgery, achieves a 'key pinch' grip. This particular grip is critically important for people with C5 tetraplegia as it is used for countless grasping activities, necessary on a day-to-day basis. A systematic design process was used to evolve the solution to provide controlled wrist flexion and extension. Concept brainstorming identified four alternative solutions which were evaluated to find the preferred concept. The chosen solution was called the Self Powered Wrist Extension Orthosis, more commonly referred to as the 'orthosis'. This concept contained a shoulder harness which provided both energy and control to the wrist harness, which in turn changed the wrist position. The orthosis was developed with the use of a mathematical model which theoretically predicted the functional performance by comparing the required force needed to move the wrist harness to the achievable force supplied by the user's shoulders. Using these parameters, the orthosis was optimized using the matlab Nelder-Mead algorithm which adjusted the wrist harness geometries to maximize the functional performance. A prototype was constructed and tested with the help of two participants who when combined, achieved an average of 18.5° of wrist rotation. The theoretical model however predicted an average range of motion of 28.4°. The discrepancy found between the theoretical and experimental result can be contributed to incorrect assumptions in the theoretical model. This included unaccounted friction and inaccurate modeling of the orthosis dynamics. The feedback from potential users of the orthosis was enthusiastic and encouraging especially towards the simplicity, usability and practicality of the design.