The dissertation thesis focuses on the analysis and modelling of power line communication. In first part of the thesis, a basic information of power line communication are described, primarily principle, advantage and disadvantage. The physical layer of the transmission and the fundament of modelling are described later. In the following section the objectives of the dissertation thesis are specified. Experimental verification of the created models and creating of indoor and outdoor models are one of the major goals of this work. These models approximate the real parameters of the power lines communication with sufficient precision. A detailed analysis of existing and current research in power line communication modeling, especially for the power line models, then follows. Based on this analysis a mathematical description of the models is specified and reference model for different scenarios is designed. The communication channel model, power line model and noise model are designed in own solution part. In this part the main goals, experimental verification of created models and designed of models for indoor and outdoor line were also realized. By merging of individual models, PLC communication system model with all parameters analyzed in detail arise. The analyzed parameters which were previously published, do not contain these parameters coherently. The last part of the thesis gives a summary of the results of these analyzes and discussion of simulation results.

Many industries have entered a new global phase which takes the environment in mind. The gas turbine industry is no exception, where the utilization of green fuels is the future to spare the environment from carbon dioxide and NOx emissions. Hydrogen has been identified as a fuel which can fulfil the global requirements set by governments worldwide. Combustion instabilities are not inevitable during gas turbine operations, especially when using a highly reactive and diffusive fuel as hydrogen. These thermoacoustics instabilities can damage mechanical components and have economic consequences in terms of maintenance and reparation. Understanding these thermoacoustic instabilities in gas turbine burners is of great interest. COMSOL Multiphysics offers a robust acoustic module compared to other available acoustic simulation programs. In this thesis, an Acoustic finite element model was built representing an atmospheric combustion rig (ACR), used to test the burners performance and NOx emissions. Complementary computational fluid dynamics (CFD) simulations were performed for 100 % hydrogen as fuel by using the Reynolds average Navier-Stokes (RANS) lag EB k - epsilon turbulence model. Necessary data was successfully imported to the Acoustic finite element model. Different techniques of building the mesh were used in COMSOL Multiphysics and NX. Similar results were obtained, proving that both mesh tools work well in acoustic simulations. Two different ways of solving the eigenvalue problem in acoustics were implemented, the classic Helmholtz equation and Linearized Navier-Stokes equations, both in the frequency domain. The Helmholtz equation proved to be efficient and detected multiple modes in the frequency range of interest. Critical modes which lived in the burner and the combustion chamber were identified. Defining a hard and soft wall boundary condition at the inlets and outlet of the atmospheric combustion rig gave similar eigenfrequencies when comparing the two boundary conditions. The soft wall boundary condition was defined with a characteristic impedance, giving a high uncertainty whether the results were trustworthy or not. A boundary condition study revealed that the boundary condition at the outlet was valid for modes living in the burner and combustion chamber. Solving the eigenvalue problem with the Linearized Navier-Stokes equations proved to be computationally demanding compared to the Helmholtz equation. Similar modes shapes were found at higher frequencies, but pressure perturbations were observed in the region where the turbulence was dominant. A prestudy for a stability analysis was established, where the ACR and the flame was represented as a generic model. Implementing a Flame Transfer Function (FTF), more specifically a linear n - tau model, showed that the time delay tau is most sensible for a parametric change and hence needs to be chosen cautiously

Large scale linear time invariant (LTI) systems arise in many physical and technical fields. An approximation, e.g. with model order reduction techniques, of this large systems is crucial for a cost efficient simulation. In this thesis we focus on a model order reduction method based on modal approximation, where the LTI system is projected onto the left and right eigenspaces corresponding to the dominant poles of the system. These dominant poles are related to the most dominant parts of the residue expansion of the transfer function and usually form a small subset of the eigenvalues of the system matrices. The computation of this dominant poles can be a formidable task, since they can lie anywhere inside the spectrum and the corresponding left eigenvectors have to be approximated as well. We investigate the subspace accelerated dominant pole algorithm and the two-sided and alternating Jacobi-Davidson method for this modal truncation approach. These methods can be seen as subspace accelerated versions of certain Rayleigh quotient iterations. Several strategies that admit an efficient computation of several dominant poles of single-input single-output LTI systems are examined. Since dominant poles can lie in the interior of the spectrum, we discuss also harmonic subspace extraction approaches which might improve the convergence of the methods. Extentions of the modal approximation approach and the applied eigenvalue solvers to multi-input multi-output are also examined. The discussed eigenvalue algorithms and the model order reduction approach will be tested for several practically relevant LTI systems.

Eine totale Mittelohr-Prothese (TORP) mit einem mit Silikon ummantelten Kugelgelenk ist in der Lage Druckveränderungen zu kompensieren und somit eine bessere Schallübertragung, im Vergleich zu starren Prothesen, zu erzielen. Die Ergebnisse können als vorläufig betrachtet werden, da diese experimentelle Studie sich auf eine von vielen verschiedenen möglichen Situationen der Tympanoplastik und eine damit verbundene kleine Stichprobengröße beschränkte. Dennoch sind die Ergebnisse mit der flexiblen TORP vielversprechend für die weitere Entwicklung. / A total ossicular replacement prosthesis (TORP) with a silicone coated ball and socket joint (BSJ) is able to compensate pressure changes and therefore provide better sound transmission compared with rigid prostheses. The findings may be considered preliminary as this experimental study was limited to just one of the many different possible situations of tympanoplasty and it involved a small sample size. Nevertheless, the results with the flexible TORP were promising and could encourage further investigations on such prostheses.

Spatialization of audio in the vertical plane has historically been limited. Instead, sound designers have used basic DSP to create pseudo height effects to explain the positions of corresponding objects. In recent years, binaural synthesis has become more widespread following an increase in the use of software rendering methods. With these advancements, uncertainty seems to be present around best practices when combining sound design with binaural synthesis for vertical placement of audio cues in games. This thesis compares the vertical localization performance between head related transfer functions (HRTFs) and stereo interaural level difference (ILD), when sounds have been designed with basic DSP to have auditory spatial schema (ASC). A sort of embedment of positional information. It was found that there was no significant time difference between the conditions, while hitcount, the number of correct directions selected, displayed a significant difference in some of the comparisons.

Dans le but de montrer l’influence de la morphologie fractale d’un agrégat sur son comportement thermophorétique, un nouveau dispositif expérimental a été développé ; le SpectroMètreThermophorétique Circulaire (SMTC). Cet instrument permet de mesurer la vitesse moyenne de thermophorèse des particules dans une zone de sélection comprise entre une plaque chaude et une plaque froide. Pour cela, nous avons développé une fonction de transfert spécifique au principe de l’instrument sur la base des travaux existant sur les analyseurs différentiels de mobilité électrique.Une qualification expérimentale du SMTC a été réalisée avec des billes de latex monodispersées de tailles comprises entre 64 nm et 500 nm. Le bon accord entre les vitesses de thermophorèse obtenues et la théorie de Beresnev et Chernyak (1995) nous a permis de valider le fonctionnement de l’instrument.Par la suite, nous avons comparé les vitesses de thermophorèse expérimentales obtenues avec le SpectroMètre Thermophorétique Circulaire pour des particules sphériques et des agrégats produits par un générateur d’aérosol à combustion. Contrairement aux résultats obtenus avec les billes de latex, nous observons une augmentation de la vitesse de thermophorèse des agrégats avec leur diamètre de mobilité électrique.Grâce à une étude morphologique des agrégats, nous avons remarqué que la vitesse de thermophorèse est dépendante du nombre de particules primaires de l’agrégat. Ces résultats expérimentaux confirment pour la première fois les données théoriques de Mackowski (2006)obtenues par des simulations Monte-Carlo. De plus, une comparaison avec les travaux de Messerer et al. (2003) montre que la vitesse de thermophorèse des agrégats semble indépendante de la taille des particules primaires. / In order to show the influence of the morphology of a fractal aggregate on its thermophoretic behavior, a new experimental device has been developed; the SpectroMètre ThermophorétiqueCirculaire (SMTC). This instrument is used to measure the mean thermophoretic velocity of particles selected between a hot plate and a cold plate thanks to a transfer function based on the geometry of the radial flow differential mobility analyser RF-DMA or SMEC (Spectromètre de Mobilité Electrique Circulaire). For the experimental validation, effective thermophoretic velocities of monodispersed spherical latex particles for diameters ranging from 64 nm to 500 nm and a temperature gradient equal to 50 750 K/m are measured and compared with theoretical values. The good agreement between the experimentals results and theoretical values of Beresnev and Chernyak (1995) helps us to validate the operation of the instrument.Then we compare experimental thermophoretic velocity obtained with the SMTC for spherical particles and aggregates produced by a combustion aerosol generator. Contrary to the results obtained with the PSL particles, we observe that the thermophoretic velocity of aggregates increases with the electrical mobility diameter. Thanks to a morphological study of the aggregates, we showed that the thermophoretic velocity depends on the number of primary particles of the aggregate. These experimental results confirm,for the first time, the theoretical data of Mackowski (2006) obtained by a Monte Carlo simulation. Moreover, a comparison with the experimental results of Messerer et al. (2003) shows that thethermophoretic velocity of aggregates seems independent of the primary particle size.

Ces travaux sur la stabilisation de la Ligne de Visée d’un dispositif optronique s’inscrivent dans le contexte actuel de durcissement des exigences de stabilisation et de réduction du temps accordé à la synthèse des lois de commande.Ils incluent dans un premier temps l’amélioration de la performance intrinsèque de stabilisation du système. La solution proposée ici est l’ajout d’un étage de stabilisation supplémentaire à une structure de stabilisation existante. L’architecture de ce nouvel étage est définie. Les composants sont choisis parmi les technologies existantes puis caractérisés expérimentalement. Un modèle complet du système à deux étages de stabilisation est ensuite proposé.L’objectif de ces travaux comprend également la simplification des procédures d’élaboration des lois de commande par l’utilisation d’une fonction de coût F incluant notamment la Fonction de Transfert de Modulation (qui quantifie le flou introduit par l’erreur de stabilisation dans l’image) en lieu et place ducritère dérivé usuel qui nécessite des vérifications supplémentaires et qui peut s’avérer conservatif.L’évaluation de F étant coûteuse en temps de calcul, un algorithme d’optimisation bayésienne, adapté à l’optimisation des fonctions coûteuses, permet la synthèse des lois de commande du système dans un temps compatible avec les contraintes industrielles, à partir de la modélisation du système précédemment proposée. / The presented work on the Line of Sight stabilization of an optronic device meets the heightened demands regarding stabilization performances that come with the reduction of the time allowed to controller tuning.It includes the intrinsinc improvement of the system stabilization. The proposed solution features a double stabilization stage built from a single stabilization stage existing system. The new architecture is specified and the new components are chosen among the existing technology and experimentally characterized. A complete double stabilization stage model is then proposed.The simplification of the controller tuning process is another goal. The designed cost function F includes a high-level optronic criterion, the Modulation Transfer Function (that quantifies the level of blur broughtinto the image by the residual motion of the platform) instead of the usual low-level and potentially conservative criterion.The function F is costly to evaluate. In order to tune the controller parameters within industrial time constraints, a Bayesian algorithm, adapted to optimization with a reduced budget of evaluations, is implemented.Controllers of both stabilization stages are simultaneously tuned thanks to the previously developped system model.

Lake St. Croix is a natural impoundment located at the southern end of the St. Croix River. Land use changes since European settlement (c. 1850) have resulted in nutrient runoff, eutrophication, and periodic oxygen depletion in the hypolimnion of Lake St. Croix. Establishing sound lake management practices requires knowledge of historical conditions obtained through paleoecological studies. Remains of non-biting midges (Insecta: Diptera Chironomidae) in lake sediments have been shown to be reliable indicators of past hypolimnetic oxygen conditions. Cores from two sub-basins in the lake were collected in 2006. Midge analysis indicated that shifts in species assemblages correspond to the times of land use change. Chironomus and Procladius, which are tolerant of low oxygen levels, increased in relative abundance as land use changes adversely impacted the St. Croix River’s watershed. Volume-weighted hypolimnetic oxygen concentrations were estimated using a transfer function developed for southern Ontario. Mean post-settlement chironomid reconstructed average volume-weighted hypolimnetic oxygen values were 0.73 mg/L lower than mean pre-settlement values for sub-basin 1, near Prescott, WI and 0.45 mg/L lower for sub-basin 3, near Lakeland, MN. These results indicate that oxygen depletion has occurred in the lake since the time of European settlement, and are supported by increases in the relative abundance of eutrophic midge bioindicators and the decrease in relative abundance of bioindicators of less productive conditions since the 1850s. This study, in conjunction with other historical and paleoecological studies of Lake St. Croix, provides historical data for setting management goals and strategies for Lake St. Croix.

No description available.

This thesis was conducted on behalf of Butong AB, who wanted to test and develop an environmental friendly, so called green sound barrier, which combines both art and science.Different configurations of the product were proposed by the company with various filling materials, as it was predicted that the filling materials would be the main sound absorbent among all parts of the structure.The thesis work started by selecting the best of the proposed fillings which could be of interest - that is those which were expected to have high sound absorption coefficients. The selection process was based on experience, reading and advice. The main idea behind the selection process was saving cost for the company as well as effort.Impedance tube method was used for performing the measurements on samples of the green sound barriers, in order to calculate the acoustical properties of each material and every construction, as it was considerably reliable, cheap and fast to use.The measurements were done according to a combination between standards described in ISO 10534-2:1998 and ASTM E2611-09, for performing test measurements using the impedance tube.This master thesis gives an explanation of the predicted absorption characteristics of the green sound barriers including the usage of different fillings, as well as the advantages and disadvantages of using it in real life applications.