Un-doped, Tb3+ as well as Yb3+ doped ZnO nanocrystals with different concentrations of RE3+ (Tb3+, Yb3+) ions were successfully synthesized via sol-gel method to produce rare earth activated zinc oxide nanophosphors. The phosphor powders were produced by drying the precursor gels at 200˚C in ambient air. Based on the X-ray diffraction results, it was found that the pure and RE3+ doped ZnO nanophosphors were highly polycrystalline in nature regardless of the incorporation of Tb3+ or Yb3+ ions. Moreover, the diffraction patterns were all indexed to the ZnO Hexagonal wurtzite structure and belong to P63mc symmetry group. The Raman spectroscopy confirmed the wurtzitic structure of the prepared samples. Elemental mapping conducted on the as prepared samples using Scanning electron microscope (SEM) equipped with energy dispersive X-ray spectrometer (EDX) revealed homogeneous distribution of Zn, O, and RE3+ ions. The high resolution transmission electron microscope (HR-TEM) analyses indicated that the un-doped and RE3+ doped samples were composed of hexagonal homogeneously dispersed particles of high crystallinity with an average size ranging from 4 to 7 nm in diameter, which was in agreement with X-ray diffraction (XRD) analyses. ZnO:Tb3+ PL study showed that among different Tb3+ concentrations, 0.5 mol% Tb3+ doped ZnO nanoparticles showed clear emission from the dopant originating from the 4f-4f intra-ionic transitions of Tb3+ while the broad defects emission was dominating in the 0.15 and 1 mol% Tb3+doped ZnO. Optical band-gap was extrapolated from the Ultraviolet Visible spectroscopy (UV-Vis) absorption spectra using TAUC‟s method and the widening of the optical band-gap for the doped samples as compared to the un-doped sample was observed. The PL study of ZnO:Yb3+ samples was studied using a 325 nm He-Cd laser line. It was observed that the ZnO exciton peak was enhanced as Yb3+ions were incorporated in ZnO matrix. Furthermore, UV-VIS absorption spectroscopic study revealed the widening of the band-gap in Tb3+ doped ZnO and a narrowing in the case of Yb3+ doped ZnO system. X-ray photoelectron spectroscopy demonstrated that the dopant was present in the doped samples and the result was found to be consistent with PL data from which an energy transfer was evidenced. Energy transfer mechanism was evidenced between RE3+ and ZnO nanocrystals and was discussed in detail. / Physics / M.Sc. (Physics)

The synthesis of metal-redox active ligand complexes is described, along with reactivity studies aimed at facilitating novel C-N bond forming reactions. A copper bis(iminosemiquinone) structure is characterized, analyzed and its reduction series are characterized and the reactivity of the Cu(II) bis(amidophenolate) analog is investigated with tosyl azide. The identification of the major reaction product and its characterization is detailed, with reaction sensitivities and heavily distorted x-ray diffraction single crystal structure generating a complex data set. The characterization of the isolated product is ongoing, with EPR studies aimed at identifying the radical nature of the complex. Unusual solvent effects and solubility issues have been noted with these initial EPR studies and more data is necessary before analysis can be properly attempted. An ytterbium bis(amidophenolate) complex was synthesized and its reactivity studied with aryl azides. Initial reactivities generate the first documented lanthanide tetrazenes in-lieu of the targeted ytterbium imido. Reactivities and characterization of these complexes support a stable, heavily ionic tetrazene-metal complex with no observed redox nature, UV light sensitivities, or imido azide-tetrazene equilibrium observed in various tetrazene transition metal complexes. Synthesis of a sterically blocked ytterbium imido was attempted, utilizing DMAP. Initial isolation was achieved with characterization and reactivity studies supporting the imido nature of the complex. The weak coordinating of the DMAP provided instability that proved in opposition to crystallization, however, so the imido could not be confirmed. Initial reactions using alternative steric hinderance from triphenylphosphine oxide and pyridine N-oxide prove promising to increasing the stability of the presumed ytterbium imido. Organic synthesis was performed generating a potential antibacterial agent. The synthesis of cyclopropenes was initiated as antagonists for ETR proteins in fruits and plants. The intermediates proved highly sensitive to harsh chemical conditions, which was overcome utilizing a tin-mediated Barbier allylation. The cyclopropene alcohol synthon was synthesized, though protecting group optimization is necessary.

Lasers which operate at both high average power and energy are in demand for a wide range of applications such as materials processing, directed energy and EUV generation. Presented in this dissertation is a high-power 1 μm ytterbium-based hybrid laser system with temporally tailored pulse shaping capability and up to 62 mJ pulses, with the expectation the system can scale to higher pulse energies. This hybrid system consists of a low power fiber seed and pre-amplifier, and a solid state thin-disk regenerative amplifier. This system has been designed to generate high power temporally tailored pulses on the nanosecond time scale. Temporal tailoring and spectral control are performed in the low power fiber portion of the system with the high pulse energy being generated in the regenerative amplifier. The seed system consists of a 1030 nm fiber-coupled diode, which is transmitted through a Mach-Zehnder-type modulator in order to temporally vary the pulse shape. Typical pulses are 20-30 ns in duration and have energies of ~0.2 nJ from the modulator. These are amplified in a fiber pre-amplifier stage to ~100 nJ before being used to seed the free-space Yb:YAG thin-disk regenerative amplifier. Output pulses have maximum demonstrated pulse energies of 62 mJ with 20 ns pulse after ~250 passes in the cavity. The effects of thermal distortion in laser and passive optical materials are also. Generally the development of high power and high energy lasers is limited by thermal management strategies, as thermally-induced distortions can degrade laser performance and potentially cause catastrophic damage. Novel materials, such as optical ceramics, can be used to mitigate thermal distortions; however, thorough analysis is required to optimize their fabrication and minimize thermal distortions. iv Using a Shack-Hartmann wavefront sensor (SHWFS), it is possible to analyze the distortion induced in passive and doped optical elements by high power lasers. For example, the thin-disk used in the regenerative amplifier is examined in-situ during CW operation (up to 2 kW CW pump power). Additionally, passive oxide-based optical materials and Yb:YAG optical ceramics are also examined by pumping at 2 and 1 μm respectively to induce thermal distortions which are analyzed with the SHWFS. This method has been developed as a diagnostic for the relative assessment of material quality, and to grade differences in ceramic laser materials associated with differences in manufacturing processes and/or the presence of impurities. In summation, this dissertation presents a high energy 1 μm laser system which is novel in its combination of energy level and temporal tailoring, and an analysis of thermal distortions relevant to the development of high power laser systems.

No description available.

Lasers find a wide range of applications in many areas including photo-biology, photo-chemistry, materials processing, imaging and telecommunications. However, the practical use of such sources is often limited by the bulky nature of existing systems. By fabricating channel waveguides in solid-state laser-gain materials more compact laser systems can be designed and fabricated, providing user-friendly sources. Other advantages inherent in the use of waveguide gain media include the maintenance of high intensities over extended interaction lengths, reducing laser thresholds. This thesis presents the development of Yb:tungstate lasers operating around 1μm in waveguide geometries. An Yb:KY(WO₄)₂ planar waveguide laser grown by liquid phase epitaxy is demonstrated with output powers up to 190 mW and 76 % slope efficiency. This is similar to the performance from bulk lasers but in a very compact design. Excellent thresholds of only 40 mW absorbed pump power are realised. The propagation loss is found to be less than 0.1 dBcm⁻¹ and Q-switched operation is also demonstrated. Channel waveguides are fabricated in Yb:KGd(WO₄)₂ and Yb:KY(WO₄)₂ using ultrafast laser inscription. Several of these waveguides lase in compact monolithic cavities. A maximum output power of 18.6 mW is observed, with a propagation loss of ~2 dBcm⁻¹. By using a variety of writing conditions the optimum writing pulse energy is identified. Micro-spectroscopy experiments are performed to enable a fuller understanding of the induced crystal modification. Observations include frequency shifts of Raman lines which are attributed to densification of WO₂W bonds in the crystal. Yb:tungstate lasers can generate ultrashort pulses and some preliminary work is done to investigate the use of quantum dot devices as saturable absorbers. These are shown to have reduced saturation fluence compared to quantum well devices, making them particularly suitable for future integration with Yb:tungstate waveguides for the creation of ultrafast, compact and high repetition rate lasers.

Ce travail de thèse est consacré au développement de sources lasers femtosecondes à haute cadence, de forte puissancemoyenne (>10 W) avec des énergies supérieures à 100 μJ. Ce type de sources est primordial pour le développementd’applications industrielles variées (micro-usinage athermique, chirurgie oculaire, …) ainsi qu’en recherchefondamentale pour l’étude de l’interaction laser matière.Après un chapitre d’introduction sur l’état de l’art des chaînes lasers de forte puissance moyenne à base de matériauxdopés ytterbium, la réalisation d’une chaîne laser de forte puissance moyenne compacte à base de fibre photoniquemicrostructurée à large aire modale sera présentée. Il sera notamment démontré les principales limitations en termed’énergie et de puissance moyenne. D’une part, le fort confinement de l’impulsion lumineuse dans le coeur de la fibrefavorise l’accumulation d’effets non-linéaires lors de l’amplification et détériore la qualité de l’impulsion. D’autrepart, en raison du diamètre de coeur important (> 70 μm) choisit pour lutter contre l’effet précèdent, le guidage dumode fondamental TEM00 de ces fibres est très critique et devient sensible à la charge thermique interne à la fibre.Cette source laser a été utilisée dans le cas de deux applications bien spécifiques : le perçage de plaques d’acierépaisses pour une finalité de déminage (relatif au cadre du financement de cette thèse par la Direction Générale del’Armement) et à la génération d’harmoniques d’ordres élevées à très haute cadence (relatif au domaine d’expertisedu CELIA). Ces deux applications sont traitées au cours du troisième chapitre.A la vue des limitations observées et afin de disposer de chaînes lasers plus énergétiques et offrant des duréesd’impulsions encore plus courtes, une nouvelles architecture d’amplification a été proposée : le pompage fortebrillance de matériaux dopés Ytterbium. Ce concept présenté dans le dernier chapitre utilise le développement desources fibrées monomodes continues émettant à 976 nm. Cette architecture d’amplification a été utilisée afin deréaliser d’une part un oscillateur sub-70 fs et de forte puissance moyenne (>2,3 W) à une cadence de 73 MHz etd’autre part : un amplificateur type « booster » à fort gain. Deux expériences qui ont été réalisées avec des cristauxd’Yb:CaF2. Ce matériaux présente en effet l’avantage d’avoir un très large spectre d’émission (>60 nm) propice à lagénération et amplification d’impulsions femtosecondes mais aussi d’être « compatible » avec les chaînes de trèsforte puissance grâce à sa très bonne conductivité thermique. / This work concerns the development of high repetition rate femtosecond lasers with high average power (>10 W)and energies in excess of 100 μJ. Such lasers are paramount for the development of new industrial applications(athermal micro-drilling, eye surgery, ...) and for fundamental research on high repetition rate laser matter interactionstudies.After a brief introduction and the state of the art summary on high-average power femtosecond laser with ytterbiumdoped materials, a compact high-average power femtosecond laser with a large mode area microstructured rod typeamplifier will be presented. It will browse the main limitations in terms of energy and average power. Limitationsare mainly due to the strong confinement of the electric field propagating in the fibre core leading to non-linear effectsaccumulated during the amplification. On the other hand, for larger core diameter (> 70 μm), the fundamental modeguiding (TEM00) is very weak and thus very sensitive to the internal thermal load of the fibre.This laser source has been used in two specific applications: athermal drilling of thick stainless steel plate for mineclearing(an application of interest for the Direction Générale de l’Armement) and High order Harmonics Generationat high repetition rate (related to CELIA activities). These two applications are presented in the third chapter.In order to stretch the limits and generate more energetic and a shorter pulse, a new amplification scheme has beenproposed, namely high brightness optical pumping of ytterbium doped materials. This concept presented in the lastchapter benefits from the development of high average power single-mode fibre lasers source emitting at 976 nm.This amplification scheme allowed us to realize a high average power Kerr-lens oscillator delivering pulses with apulse duration below than 70 fs and an average power of 2.3W at a repetition rate of 73 MHz. In a second phase, wealso developed a « booster » amplifier with a high single- pass-gain. These two results have been obtained by usingYb-doped CaF2 crystals. This material presents the advantage to have a very broad emission bandwidth (> 60nm)suitable to generate and amplify femtosecond pulses and to be compatible with high average power laser due to hisvery good thermal conductivity.

Um einen besseren Zugang zum Verständnis struktureller Eigenschaften von den ternären Verbindungen des Systems Yb–Pd–Ga zu bekommen, wurden zunächst die Ordnungs- und Unordnungsbeziehungen sowie die chemische Bindung in den Kristallstrukturen binärer Pd–Ga- bzw. Yb–Ga-Verbindungen analysiert. Im Rahmen der phasenanalytischen Untersuchungen des binären Systems Yb–Ga konnte eine neue Verbindung charakterisiert werden (Ytterbiumpentagallid). Für den galliumreichen Teil des ternären Phasendiagramms Yb–Pd–Ga wurde ein isothermer Schnitt bei 600 °C erstellt (> 50 At.-% Ga). Die Homogenitätsbereiche der untersuchten Verbindungen wurden metallographisch bzw. röntgenographisch bestimmt. Die Kristallstrukturen wurden aus Röntgen-Einkristalldaten bestimmt. In den Kristallstrukturen wurden drei unterschiedliche Arten von Unordnung beobachtet (Substitutionsunordnung, Symmetrie-Brechung, Positionsunordnung). Für eine Reihe von Verbindungen des Systems Yb–Pd–Ga wurde der elektronische Zustand von Yb bestimmt. Dies gelang mit Hilfe von Messungen der magnetischen Suszeptibilität bzw. mit der Röntgen-Absorptionsnahkantenspektroskopie.

Um einen besseren Zugang zum Verständnis struktureller Eigenschaften von den ternären Verbindungen des Systems Yb–Pd–Ga zu bekommen, wurden zunächst die Ordnungs- und Unordnungsbeziehungen sowie die chemische Bindung in den Kristallstrukturen binärer Pd–Ga- bzw. Yb–Ga-Verbindungen analysiert. Im Rahmen der phasenanalytischen Untersuchungen des binären Systems Yb–Ga konnte eine neue Verbindung charakterisiert werden (Ytterbiumpentagallid). Für den galliumreichen Teil des ternären Phasendiagramms Yb–Pd–Ga wurde ein isothermer Schnitt bei 600 °C erstellt (> 50 At.-% Ga). Die Homogenitätsbereiche der untersuchten Verbindungen wurden metallographisch bzw. röntgenographisch bestimmt. Die Kristallstrukturen wurden aus Röntgen-Einkristalldaten bestimmt. In den Kristallstrukturen wurden drei unterschiedliche Arten von Unordnung beobachtet (Substitutionsunordnung, Symmetrie-Brechung, Positionsunordnung). Für eine Reihe von Verbindungen des Systems Yb–Pd–Ga wurde der elektronische Zustand von Yb bestimmt. Dies gelang mit Hilfe von Messungen der magnetischen Suszeptibilität bzw. mit der Röntgen-Absorptionsnahkantenspektroskopie.

Aufkonversions-Nanokristalle (UCNC) zeichnen sich als einzigartige Lumineszenzreporter aus, die Nah-infrarotes Anregungslicht in Photonen höherer Energie umwandeln. Für die gezielte Anpassung von Eigenschaften, bedarf es ein tiefes Verständnis der Prozesse der Aufwärtskonversionslumineszenz (UCL) und deren Abhängigkeit von Material und Partikeldesign. Diese Doktorarbeit untersucht die UCL-Prozesse von Yb3+,Er3+ dotierten SrF2-UCNC und zielt darauf ab, die UCL-Eigenschaften der bisher unterschätzten kubischen Wirtsgitter zu verstehen und zu steigern. Hierbei wird die fluorolytische Sol-Gel-Synthese als neuartige Syntheseroute für UCNC vorgestellt. Vorteile wie ausgezeichnete Reproduzierbarkeit, viele Freiheitsgrade bei der Temperaturbehandlung und Partikelgestaltung werden anhand von SrF2 UCNC demonstriert. Die UCNC wurden mittels UCL-Spektren, UCL-Quantenausbeuten, leistungsdichte-abhängiger relativer spektraler Verteilung sowie der Lumineszenzabklingkinetiken unter Einbeziehung kristalliner Eigenschaften wie der Kristallphase, der Kristallitgröße, der Gitterparameter und der Teilchengröße untersucht. Die Abhängigkeit der UCL-Eigenschaften von der Dotierungsmenge wurde mit einer umfassenden Dotierungsreihe beschrieben und der optimale Dotierungsbereich (Yb3+,Er3+) von kleinen, ungeschalten SrF2-UCNC eingegrenzt. Bei der Studie dotierter Kerne mit passivierenden Schalen wurde der Einfluss von Temperaturbehandlung auf die UCL-Mechanismen und die Kern-Schale-Vermischung untersucht. Anhand von unterschiedlich kalzinierten UCNC Pulvern wurde die Empfindlichkeit der UCL gegenüber der Änderung kristalliner Eigenschaften, wie Kristallphase, Kristallinität, und Kristallitgröße betrachtet. Zusammen liefern die Dotierungs-, die Kern-Schale- und die Kalzinierungsstudie wertvolle Einblicke in das gitterspezifische Verhalten der UCL-Eigenschaften als Funktion der Energiemigration und der Kristalleigenschaften. / Upconversion nanocrystals (UCNC) represent a unique type of luminescence reporters that convert near-infrared excitation light into higher energy photons. Tailoring UCNC with specific luminescence properties requires an in-depth understanding of upconversion luminescence (UCL) processes and their dependence on material and particle design. This Ph.D. thesis focuses on the UCL processes of Yb3+,Er3+ doped SrF2-UCNC and aims to understand and enhance the UCL properties of the previously underestimated cubic host lattices. Herein, fluorolytic sol-gel synthesis is introduced as a novel synthetic route for UCNC. Advantages such as excellent reproducibility, high flexibility in temperature treatment and particle design are demonstrated using SrF2 UCNC. The UCNC were characterized by UCL spectra, UCL quantum yields, excitation power density-dependent relative spectral distribution, and luminescence decay kinetics involving crystalline properties such as crystal phase, crystallite size, lattice parameters, and particle size. The dependence of UCL properties on doping amount was described in a comprehensive doping study, and the optimal doping range (Yb3+,Er3+) of small, unshelled SrF2-UCNC was identified. In a core-shell study of doped core UCNC with passivating shells, the influence of temperature treatment on UCL mechanisms and core-shell mixing was investigated. Further, using different calcined UCNC powders, the sensitivity of UCL to the change of crystalline properties, such as crystal phase, crystallinity, and crystallite size, was assessed. Together, the doping, core-shell, and calcination studies provide valuable insight into the lattice-specific behavior of UCL properties as a function of energy migration and crystal properties.

Cette thèse présente les travaux effectués pour développer et optimiser des amplificateurs et lasers 1 µm de forte puissance à base de fibre double gaine dopée Ytterbium. Le premier chapitre traite de la caractérisation passive de la fibre. Nous donnons les caractéristiques spectroscopiques de l'ion Ytterbium dans une matrice de silice. Nous présentons ensuite les moyens et résultats de caractérisation des fibres utilisées. Nous discutons ensuite certaines spécificités associées aux fibres double gaine, comme le mélange de mode. Enfin, nous faisons l'étude comparative des principales techniques d'injection de la pompe. Le second chapitre traite des amplificateurs. Nous présentons le modèle numérique de l'amplificateur dans le cas d'un régime de pompage continu et d'amplification de signaux continus. Puis, nous donnons les résultats expérimentaux permettant de le valider. Nous étudions, ensuite, l'influence des paramètres intrinsèques et extrinsèques à la fibre. Nous mettons l'accent sur les effets limitatifs du Brillouin généré. Enfin, nous présentons les paramètres permettant d'optimiser le fonctionnement des amplificateurs dans une structure simple et double étage. Le troisième chapitre traite des lasers. Nous commençons par étendre le modèle développé au cas du laser à gain homogène. Nous validons, tout d'abord, le modèle avec les résultats issus d'un laser en cavité Fabry-Pérot de 1 W, puis, nous optimisons ses paramètres. Nous présentons, ensuite, le laser multimode à 1083 nm pour le pompage optique de l'hélium. Nous étudions l'effet de divers paramètres sur la largeur d'enveloppe mesurée, et confrontons les résultats au modèle numérique. Nous abordons l'étude des instabilités observées et l'analyse de leurs origines. Nous continuons par présenter les résultats théoriques et expérimentaux d'un laser en anneau. Enfin, nous étudions un laser pour le pompage d'un résonateur Raman.