The statistical properties of cross-validation bandwidths can be improved by choosing an appropriate kernel, which is different from the kernels traditionally used for cross- validation purposes. In the light of this idea, we developed two new methods of bandwidth selection termed: Indirect cross-validation and Robust one-sided cross- validation. The kernels used in the Indirect cross-validation method yield an improvement in the relative bandwidth rate to n^1=4, which is substantially better than the n^1=10 rate of the least squares cross-validation method. The robust kernels used in the Robust one-sided cross-validation method eliminate the bandwidth bias for the case of regression functions with discontinuous derivatives.

Multimedia applications over the Internet are getting more and more popular. While non-real-time streaming services, such as YouTube and Megavideo, are attracting millions of visiting per day, real-time conferencing applications, of which some instances are Skype and Yahoo Voice Chat, provide an interesting experience of communication. Together, they make the fancy Internet world become more and more amusing. Undoubtedly, multimedia flows will eventually dominate the computer network in the future. As the population of multimedia flows increases gradually on the Internet, quality of their service (QoS) is more of a concern. At the moment, the Internet does not have any guarantee on the quality of multimedia services. To completely surpass this limitation, modifications to the network structure is a must. However, it will take years and billions of dollars in investment to achieve this goal. Meanwhile, it is essential to find alternative ways to improve the quality of multimedia services over the Internet. In the past few years, many endeavors have been carried on to solve the problem. One interesting approach focuses on the development of end-to-end congestion control strategies for UDP multimedia flows. Traditionally, packet losses and delays have been commonly used to develop many known control schemes. Each of them only characterizes some different aspects of network congestion; hence, they are not ideal as feedback signals alone. In this research, the flow accumulation is the signal used in feedback for flow control. It has the advantage of reflecting both packet losses and delays; therefore, it is a better choice. Using network simulations, the accumulations of real-time audio applications are collected to construct adaptive flow controllers. The reason for choosing these applications is that they introduce more control challenges than non-real-time services. One promising flow control strategy was proposed by Bhattacharya and it was based on Model Predictive Control (MPC). The controller was constructed from an ARX predictor. It was demonstrated that this control scheme delivers a good QoS while reducing bandwidth use in the controlled flows by 31 percent to 44 percent. However, the controller sometime shows erratic response and bandwidth usage jumps frequently between lowest and highest values. This is not desirable. For an ideal controller, the controlled bandwidth should vary near its mean. To eliminate the deficiency in the strategy proposed by Bhattacharya, it is proposed to introduce a feed forward term into the MPC formulation, in addition to the feedback terms. Simulations show that the modified MPC strategy maintains the benefits of the Bhattacharya strategy. Furthermore, it increases the probability of bandwidth savings from 58 percent for the case of Bhattacharya model to about 99 percent for this work.

In this study, the characteristic properties of the ultrafast laser exhibit sufficiently in the application of RFOBIC and two-photon UV fluorescence. This laser can be used to measure photonic components with fast responding speed due to the ultrashort pulse and broad bandwidth which is RF bandwidths of greater than 1.8THz. we have demonstrated the use of a frequency-doubled femtosecond optical parametric oscillator in generating two-photon excitation that is equivalent to ultraviolet(UV) light with wavelength less than 300 nm. This capability allows observation of some amino acids and enables excitation that is only possible with wavelength in UVB range(290 nm-320 nm)

The bandwidth-enhancement characteristics of slot-loaded rectangular microstrip antennas constructed on a thin microwave substrate have been investigated in this dissertation. The primary design process about this topic is demonstrated. Firstly, a new antenna design idea is provided from pre-determined antenna design specifications or obtained antenna performances from the previous antenna design, which lead to a novel antenna configuration. From the results of the simulation software IE3DTM, the characteristics of this new antenna configuration are obtained and compared with the experimental results. The antenna configuration is also modified to achieve a final optimal design from the comparison results. The study of the single-feed dual-frequency rectangular microstrip antenna with a pair of bent slots is first presented. By embedding properly-designed slots on a rectangular microstrip patch, the impedance characteristics of this antenna design have been effectively changed to exhibit dual-resonant behavior, which result in the excitation of two adjacent resonant modes with similar radiation characteristics. Furthermore, the two resonant modes can be excited at frequencies very close to each other to form a wider operating bandwidth by embedding additional perturbation slots. Four successful antenna designs with different embedded-slot shapes for bandwidth enhancement have been implemented and discussed in this dissertation.

Capacitive Micromachined Ultrasonic Transducers (CMUTs) have been introduced as a viable alternative to piezoelectric transducers in medical ultrasound imaging in the last decade. CMUTs are especially suitable for applications requiring small size such as catheter based cardiovascular applications. Despite these advantages and their broad bandwidth, earlier studies indicated that the overall sensitivity of CMUTs need to be improved to match piezoelectric transducers. This dissertation addresses this issue by introducing the dual-electrode CMUT concept. Dual electrode configuration takes advantage of leveraged bending in electrostatic actuators to increase both the pressure output and receive sensitivity of the CMUTs. Static and dynamic finite element based models are developed to model the behavior of dual-electrode CMUTs. The devices are then successfully fabricated and characterized. Experiments illustrate that the pulse echo performance is increased by more than 15dB with dual-electrode CMUTs as compared to single electrode conventional CMUT. Further device optimization is explored via membrane shape adjustment by adding a center mass to the design. Electromechanical coupling coefficient (kc2) is investigated as a figure of merit to evaluate performance improvement with non-uniform/uniform membrane dual-electrode CMUTs. When the center mass is added to the design, the optimized non-uniform membrane increases the electromechanical coupling coefficient from 0.24 to 0.85 while increasing one-way 3dB fractional bandwidth from 80% to 140% and reducing the DC bias requirement from 160V to 132V. The results of this modeling study are successfully verified by experiments. With this membrane shape adjustment, significant performance improvement (nearly 20dB) is achieved with the dual-electrode CMUT structure that enables the CMUT performance to exceed that of piezoelectric transducers for many applications.

<p>In this thesis, design aspects of fully integrated multibandmultistandard front-end receivers are investigated based onthree fundamental aspects: noise, linearity and operatingfrequency. System level studies were carried out to investigatethe effects of different modulation techniques, duplexing andmultiple access methods on the noise, linearity and selectivityperformance of the circuit. Based on these studies and thelow-cost consideration, zero-IF, low-IF and wideband-IFreceiver architectures are promising architectures. These havea common circuit topology in a direct connection between theLNA and the mixer, which has been explored in this work toimprove the overall RF-to-IF linearity. One front-end circuitapproach is used to achieve a low-cost solution, leading to anew multiband multistandard front-end receiver architecture.This architecture needs a circuit whose performance isadaptable due to different requirements specified in differentstandards, works across several RF-bands and uses a minimumamount ofexternal components.</p><p>Five new circuit topologies suitable for a front-endreceiver consisting of an LNA and mixer (low-noise converter orLNC) were developed. A dual-loop wide-band feedback techniquewas applied in all circuits investigated in this thesis. Threeof the circuits were implemented in 0.18 mm RF-CMOS and 25 GHzbipolar technologies. Measurement results of the circuitsconfirmed the correctness of the design approach.</p><p>The circuits were measured in several RF-bands, i.e. in the900 MHz, 1.8 GHz and 2.4 GHz bands, with S11 ranging from–9.2 dB to–17 dB. The circuits have a typicalperformance of 18-20 dB RF-to-IF gain, 3.5-4 dB DSB NF and upto +4.5 dBm IIP3. In addition, the circuit performance can beadjusted by varying the circuit’s first-stage biascurrent. The circuits may work at frequencies higher than 3GHz, as only 1.5 dB of attenuation is found at 3 GHz and nopeaking is noticed. In the CMOS circuit, the extrapolated gainat 5 GHz is about 15 dB which is consistent with the simulationresult. The die-area of each of the circuits is less than 1mm2.</p>

Robot and sensor networks are needed for safety, security, and rescue applicationssuch as port security and reconnaissance during a disaster. These applications rely on realtimetransmission of images, which generally saturate the available wireless networkinfrastructure. Knowledge-based Compression is a strategy for reducing the video frametransmission rate between robots or sensors and remote operators. Because images mayneed to be archived as evidence and/or distributed to multiple applications with differentpost processing needs, lossy compression schemes, such as MPEG, H.26x, etc., are notacceptable. This work proposes a lossless video server system consisting of three classesof filters (redundancy, task, and priority) which use different levels of knowledge (localsensed environment, human factors associated with a local task, and relative globalpriority of a task) at the application layer of the network. It demonstrates the redundancyand task filters for realistic robot search scenarios. The redundancy filter is shown toreduce the overall transmission bandwidth by 24.07% to 33.42%, and when combinedwith the task filter, reduces overall transmission bandwidth by 59.08% to 67.83%. Byitself, the task filter has the capability to reduce transmission bandwidth by 32.95% to33.78%. While Knowledge-based Compression generally does not reach the same levels ofreduction as MPEG, there are instances where the system outperforms MPEG encoding.

Advances in wireless technologies in the last ten years have created considerable opportunities as well as challenges for wireless body medical systems. The foremost challenge is how to build a reliable system connecting heterogeneous body sensors and actuators in an open system environment. In this dissertation, we present our work towards this goal. The system addresses four design issues: the underlying network architecture, the network scheduling disciplines, the location determination and tracking methods, and the embedded application execution architecture. We first present the design of an adaptive wireless protocol (MBStarPlus) to provide the basic wireless platform WBAN (Wireless Body Area Network). MBStarPlus is a real-time, secure, robust and flexible wireless network architecture. It is designed to utilize any low-power wireless radio as its physical layer. The TDMA mechanism is adopted for realtime data delivery. The time-slot length is adjustable for flexibility. Multiple technologies are utilized to provide reliability and security. We next investigate how to coordinate the body sensors/actuators that can optimally select from a range (maximum and minimum) of data rates. Two bandwidth scheduling algorithms are proposed. One is a greedy algorithm that works for sensors with limited computational capability. The other is the UMinMax scheduling algorithm that has better scalability and power-saving performance but is more computationally intensive. The third issue addressed in this proposal is how to achieve location determination and tracking by a mix of high-precision but expensive and lower-precision but cost-effective sensors. This is achieved by a novel collaborative location determination scheme ColLoc that can integrate different types of distance measurements into a location estimation algorithm by weighing them according to their precision levels. Through this, a localization service can be both cost-effective and sufficiently accurate. Fourth, in order to minimize the effects of long network latency when the body network scales up, we propose ControlInGateway, an architectural feature that allows a control application to be executed inside the network gateway without the host's involvement. With ControlInGateway, a wireless system could achieve the same control quality as a wired system. / text

Electromagnetic equations pertaining to electrically small dipole antennas and electrically small monopole antennas with small circular ground planes are reviewed. Two electrically small antenna designs are analyzed numerically and the results are compared. The first is a frequency agile version of the two-dimensional (2D) planar Egyptian axe dipole (EAD) antenna. The second is its three-dimensional (3D) counterpart. The frequency agile performance characteristics of both the 2D and 3D EAD designs are studied and compared. The potential for non-Foster augmentation to achieve large instantaneous fractional impedance bandwidths is detailed for each antenna. In addition, details are given on how to run frequency agile simulations in both ANSYS HFSS and Agilent's ADS. Details are also provided on how to generate an antenna's non-Foster |S₁₁| and radiation efficiency curves using HFSS, and how to generate an antenna's non-Foster |S₁₁| curve using ADS.

Medizinische Volumenvisualisierung ist ein wertvolles Werkzeug zur Betrachtung von Volumen- daten in der medizinischen Praxis und Lehre. Eine interaktive, stereoskopische und kollaborative Darstellung in Echtzeit ist notwendig, um die Daten vollständig und im Detail verstehen zu können. Solche Visualisierung von hochauflösenden Daten ist jedoch wegen hoher Hardware- Anforderungen fast nur an speziellen Visualisierungssystemen möglich. Remote-Visualisierung wird verwendet, um solche Visualisierung peripher nutzen zu können. Dies benötigt jedoch fast immer komplexe Software-Deployments, wodurch eine universelle ad-hoc Nutzbarkeit erschwert wird. Aus diesem Sachverhalt ergibt sich folgende Hypothese: Ein hoch performantes Remote- Visualisierungssystem, welches für Stereoskopie und einfache Benutzbarkeit spezialisiert ist, kann für interaktive, stereoskopische und kollaborative medizinische Volumenvisualisierung genutzt werden. Die neueste Literatur über Remote-Visualisierung beschreibt Anwendungen, welche nur reine Webbrowser benötigen. Allerdings wird bei diesen kein besonderer Schwerpunkt auf die perfor- mante Nutzbarkeit von jedem Teilnehmer gesetzt, noch die notwendige Funktion bereitgestellt, um mehrere stereoskopische Präsentationssysteme zu bedienen. Durch die Bekanntheit von Web- browsern, deren einfach Nutzbarkeit und weite Verbreitung hat sich folgende spezifische Frage ergeben: Können wir ein System entwickeln, welches alle Aspekte unterstützt, aber nur einen reinen Webbrowser ohne zusätzliche Software als Client benötigt? Ein Proof of Concept wurde durchgeführt um die Hypothese zu verifizieren. Dazu gehörte eine Prototyp-Entwicklung, deren praktische Anwendung, deren Performanzmessung und -vergleich. Der resultierende Prototyp (CoWebViz) ist eines der ersten Webbrowser basierten Systeme, welches flüssige und interaktive Remote-Visualisierung in Realzeit und ohne zusätzliche Soft- ware ermöglicht. Tests und Vergleiche zeigen, dass der Ansatz eine bessere Performanz hat als andere ähnliche getestete Systeme. Die simultane Nutzung verschiedener stereoskopischer Präsen- tationssysteme mit so einem einfachen Remote-Visualisierungssystem ist zur Zeit einzigartig. Die Nutzung für die normalerweise sehr ressourcen-intensive stereoskopische und kollaborative Anatomieausbildung, gemeinsam mit interkontinentalen Teilnehmern, zeigt die Machbarkeit und den vereinfachenden Charakter des Ansatzes. Die Machbarkeit des Ansatzes wurde auch durch die erfolgreiche Nutzung für andere Anwendungsfälle gezeigt, wie z.B. im Grid-computing und in der Chirurgie.