Among various nanomaterials, metal nanoparticles are the widely studied ones because of their pronounced distinct properties arising in the nanometer size regime, which can be tailored easily by tuning predominantly their size and shape. During the past few decades, scientists are engaged in developing new synthetic methodologies for the synthesis of metal nanoparticles which can be divided into two broad categories: i) top-down approach, utilizing physical methods and ii) bottom-up approach, employing chemical methods. As the chemical methods offer better control over particle size, numerous chemical methods have been developed to obtain metal nanoparticles with narrow size distribution. However, these two approaches have their own merits and demerits; they are not complementary to each other and also not sustainable for real time applications. Recent focus on the synthesis of metal nanoparticles is towards the development of green and sustainable synthetic methodologies. A solid state route is an exciting prospect in this direction because it eliminates usage of organic solvents thus, makes the overall process green and at the same time leads to the realization of large quantity of the materials, which is required for many applications. However, the major obstacle associated with the development of a solid state synthetic route is the lack of fundamental understanding regarding the formation mechanism of the nanoparticles in the solid state. Additionally, due to the heterogeneity present in the solid mixture, it is very difficult to ensure the proximity between the capping agent and nuclei which plays the most decisive role in the growth process. Recently, employment of amine–borane compounds as reducing agents emerged as a better prospect towards the development of sustainable synthetic routes for metal nanoparticles because they offer a variety of advantages over the traditional borohydrides. Being soluble in organic medium, amine– borane allows the reaction to be carried out in a single phase and due to its mild reducing ability a much better control over the nucleation and growth processes is realized. However, the most exciting feature of these compounds is that their reducing ability is not only limited to the solution state, they can also bring out the reduction of metal ions in the solid state. With the availability of a variety of amine–boranes of varying reducing ability, it opens up a possibility to modulate the nanostructure in both solid and solution states by a judicious choice of reducing agent. Although our current understanding regarding the growth behavior of nanoparticles has advanced remarkably, however, most often it is some classical model which is invoked to understand these processes. With the recent developments in in situ transmission electron microscopy techniques, it is now possible to unravel more complex growth trajectories of nanoparticles. These studies not only expand the scope of the present knowledge but also opens up possibilities for many future developments. Objectives • To develop an atom economy solid state synthetic methodology for the synthesis of metal nanoparticles employing amine–boranes as reducing agents. • To gain a mechanistic insight into the formation mechanisms of nanoparticles in the solid state by using amine–boranes with differing reducing ability. • Synthesis of bimetallic nanoparticles as well as supported metal nanoparticles in the solid state using ammonia borane as the reducing agent. • To develop a new in situ seeding growth methodology for the synthesis of core@shell nanoparticles composed of noble metals by employing a very weak reducing agent, trimethylamine borane and their transformation to their thermodynamically stable alloy counterparts. • Synthesis of highly monodisperse ultra-small colloidal calcium nanoparticles with different capping agents such as hexadecylamine, octadecylamine, poly(vinylpyrrolidone) and a combination of hexadecylamine/poly(vinylpyrrolidone) using the solvated metal atom dispersion (SMAD) method. To study the coalescence behavior of a pair of calcium nanoparticles under an electron beam by employing in situ TEM technique. Significant results An atom economy solid state synthetic route has been developed for the synthesis of metal nanoparticles from simple metal salts using amine–boranes as reducing agents. Amine–borane plays a dual role here: acts as a reducing agent thus brings out the reduction of metal ions and decomposes simultaneously to generate B-N based compounds which acts as a capping agent to stabilize the particles in the nanosize regime. This essentially minimizes the number of reagents used and hence simplifying and eliminating the purification procedures and thus, brings out an atom economy to the overall process. Additionally, as the reactions were carried out in the solid state, it eliminates use of organic solvents which have many adverse effects on the environment, thus makes the synthetic route, green. The particle size and the size distribution were tuned by employing amine–boranes with differing reducing abilities. Three different amine–boranes have been employed: ammonia borane (AB), dimethylamine borane (DMAB), and trimethylamine borane (TMAB) whose reducing ability varies as AB > DMAB >> TMAB. It was found that in case of AB, it is the polyborazylene or BNHx polymer whereas, in case of DMAB and TMAB, the complexing amines act as the stabilizing agents. Several controlled studies also showed that the rate of addition of metal salt to AB is the crucial step and has a profound effect on the particle size as well as the size distribution. It was also found that an optimum ratio of amine–borane to metal salt is important to realize the smallest possible size with narrowest size distribution. Whereas, use of AB and TMAB resulted in the smallest sized particles with best size distribution, usage of DMAB provided larger particles that are also polydisperse in nature. Based on several experiments along with available data, the formation mechanism of metal nanoparticles in the solid state has been proposed. Highly monodisperse Cu, Ag, Au, Pd, and Ir nanoparticles were realized using the solid state route described herein. The solid state route was extended to the synthesis of bimetallic nanoparticles as well as supported metal nanoparticles. Employment of metal nitrate as the metal precursor and ammonia borane as the reducing agent resulted in highly exothermic reaction. The heat evolved in this reaction was exploited successfully towards mixing of the constituent elements thus allowing the alloy formation to occur at much lower temperature (60 oC) compared to the traditional solid state metallurgical methods (temperature used in these cases are > 1000 oC). Synthesis of highly monodisperse 2-3 nm Cu/Au and 5-8 nm Cu/Ag nanoparticles were demonstrated herein. Alumina and silica supported Pt and Pd nanoparticles have also been prepared. Use of ammonia borane as the reducing agent in the solid state brought out the reduction of metal ions to metal nanoparticles and the simultaneous generation of BNHx polymer which encapsulates the metal (Pt and Pd) nanoparticles supported on support materials. Treatment of these materials with methanol resulted in the solvolysis of BNHx polymer and its complete removal to finally provide metal nanoparticles on the support materials. An in situ seeding growth methodology for the synthesis of bimetallic nanoparticles with core@shell architecture composed of noble metals has been developed using trimethylamine borane (TMAB) as the reducing agent. The key idea of this synthetic procedure is that, TMAB being a weak reducing agent is able to differentiate the smallest possible window of reduction potential and hence reduces the metal ions sequentially. A dramatic solvent effect was noted in the preparation of Ag nanoparticles: Ag nanoparticles were obtained at room temperature when dry THF was used as the solvent whereas, reflux condition was required to realize the same using wet THF as the solvent. However, no such behavior was noted in the preparation of Au and Pd nanoparticles wherein Au and Pd nanoparticles were obtained at room temperature and reflux conditions, respectively. This difference in reduction behavior was successfully exploited to synthesize Au@Ag, Ag@Au, and Ag@Pd nanoparticles. All these core@shell nanoparticles were further transformed to their alloy counterparts under very mild conditions reported to date. Highly monodisperse, ultrasmall, colloidal Ca nanoparticles with a size regime of 2-4 nm were synthesized using solvated metal atom dispersion (SMAD) method and digestive ripening technique. Hexadecylamine (HDA) was used as the stabilizing agent in this case. Employment of capping agent with a longer chain length, octadecylamine afforded even smaller sized particles. However, when poly(vinylpyrrolidone) (PVP), a branched chain polymer was used as the capping agent, agglomerated particles were realized together with small particles of 3-6 nm. Use of a combination of PVP and HDA resulted in spherical particles of 2-3 nm size with narrow size distribution. Growth of Ca nanoparticles via colaesence mechanism was observed under an electron beam. Employing in situ transmission electron microscopy technique, real time coalescence between a pair of Ca nanoparticles were detected and details of coalescence steps were analyzed.

Open–framework inorganic materials are an important class of compounds because of their many applications in the areas of ion–exchange, separation and catalysis. Ever since the discovery of microporous aluminophosphates by Flanigen and co–workers in the early 80’s, the field of open–framework compounds has witnessed explosive growth. It is now established that the open–framework compounds comprise of almost all the elements of the periodic table. In addition, it has been shown that the inorganic anions in the open–framework compounds can be partially substituted by rigid organic linkers such as the oxalate. The resulting inorganic–organic hybrid structures are interesting due to the variable nature of the binding properties of the organic and inorganic moieties. The present thesis consists of systematic studies on the formation of amine–templated inorganic open–framework structures and inorganic–organic hybrid compounds based on the main group, transition metal and actinide elements. In Chapter 1 of the thesis an overview of inorganic open-framework materials is presented, with an emphasis on the elements that have been employed in the present study. Chapter 2 has two parts (Parts A and B) describing the synthesis and structure of open-framework tin(II) containing compounds. In Part A, the syntheses and structures of amine–templated tin(II) phosphates are presented, and in Part B, the syntheses and structures of a family of tin(II) oxalate compounds are discussed. Weak intermolecular forces such as hydrogen-bond interactions, π•••π interactions, and lone-pair–π interactions have been observed in these compounds, and appear to lend structural stability. As part of this study, efforts have been made to evaluate the energies associated with the π•••π interactions and the lone-pair–π interactions using suitable theoretical models. In Chapter 3, a new family of organically templated hybrid materials based on indium, synthesized by partially substituting the inorganic anion (phosphite/phosphate/suphate) by the oxalate group, is presented. These compounds exhibit a wide range of structures in which the oxalates play a variety of roles. The observation of the first zero-dimensional molecular hybrid structure and the isolation of concomitant polymorphic compounds is noteworthy. The molecular hybrid structure is reactive and undergoes transformation reactions under both acidic and basic conditions. In Chapter 4, the synthesis and structural studies of five new open–framework phosphate and phosphite compounds of gallium are presented. All the compounds have three-dimensional structures, and the formation of a gallium phosphate based on only one type of building unit (spiro–5) is noteworthy. While a large number of organically templated transition metal phosphates have been synthesized, studies on transition metal phosphites are not many. In Chapter 5, the synthesis, structure and magnetic properties of a family of transition metal (cobalt, vanadium, manganese) phosphite structures templated by the organic amines are presented. A previously known vanadyl phosphite has also been isolated and investigated by temperature dependent ESR and magnetic susceptibility studies. All the transition metal compounds exhibit antiferromagnetic behavior. In Chapter 6, the synthesis, structure, and transformation reactions in amine-templated actinide phosphonoacetates are presented. The compounds, which are based on uranium and thorium, are built up from the connectivity between the metal polyhedra and the phosphonoacetate/oxalate units, forming two– and three–dimensional structures. It has been shown that the two–dimensional uranyl phosphonoacetate–oxalate compound can be prepared by two different synthetic approaches: (i) solvent–free solid state reaction at 150˚C and (ii) room temperature mechanochemical (grinding) route. The formation of oxalate hybrids using the phosphonocarboxylate ligand is a new approach in the synthesis of multi-component hybrid compounds.

Hydrocracking and hydrotreating are bitumen upgrading technologies designed to enhance fuel quality by decreasing its density, viscosity, boiling point and heteroatom content via hydrogen addition. The aim of this thesis is to model and simulate an upgrading and integrated gasification combined cycle then to evaluate the feasibility of integrating slurry hydrocracking, trickle-bed hydrotreating and residue gasification using the Aspen HYSYS® simulation software. The close-coupling of the bitumen upgrading facilities with gasification should lead to a hydrogen, steam and power self-sufficient upgrading facility with CO2 capture. Hydrocracker residue is first withdrawn from a 100,000 BPD Athabasca bitumen upgrading facility, characterized via ultimate analysis and then fed to a gasification unit where it produces hydrogen that is partially recycled to the hydrocracker and hydrotreaters and partially burned for power production in a high hydrogen combined cycle unit. The integrated design is simulated for a base case of 90% carbon capture utilizing a monoethanolamine (MEA) solvent, and compared to 65% and no carbon capture scenarios. The hydrogen production of the gasification process is evaluated in terms of hydrocracker residue and auxiliary petroleum coke feeds. The power production is determined for various carbon capture cases and for an optimal hydrocracking operation. Hence, the feasibility of the integration of the upgrading process and the IGCC resides in meeting the hydrogen demand of the upgrading facility while producing enough steam and electricity for a power and energy self-sufficient operation, regardless of the extent of carbon capture.

The discovery of M (II)-α-diimine (M = Ni, Pd) catalysts has been promoting a revolution in industrial production of polyolefins, once these can produce polymers with different topologies only varying the reaction conditions, using only ethylene as monomer. This ability has been explored by many researchers in recent decades, experimental and theoretical levels. In this study, we developed theoretical calculations on the behavior of different catalytic systems in ethylene polymerization and dimerization reactions. In the first study, we employ the Hartree-Fock (HF) Method to evaluate energies and structures involved in steps representing the ethylene dimerization by Ni (II)-bis [(pyrazolyl) ethyl] amine cationic bulky complex, discussing the behavior of complex through the dimerization steps, π-complex formation, isomerization and low probability for trimerization during dimerization process. In the last two papers we describe a theoretical investigation of ethylene polymerization reaction catalyzed by cationic complexes bulky Ni (II)-α-diimine. We employ a combination of Density Functional Theory (DFT) and molecular mechanics (MM) contained in the ONIOM approach to evaluate structures and energies of representing steps of ethylene polymerization mechanism catalyzed by Brookhart and Guan systems, discussing electronic influences and stereo environment imposed by ligands around the active site in each stage of the process, highlighting the olefin coordination angles and isomerization process of growing polymer chain. / Conselho Nacional de Desenvolvimento Científico e Tecnológico / A descoberta de catalisadores do tipo M(II)-α-diimina (M=Ni, Pd) vem promovendo uma revolução na produção industrial de poliolefinas, pois estes podem produzir polímeros com diferentes topologias variando apenas as condições reacionais, usando apenas o eteno como monômero. Esta habilidade foi explorada por diversos pesquisadores nas últimas décadas, em nível experimental e teórico. Neste estudo, desenvolvemos cálculos teóricos sobre o comportamento de diferentes sistemas catalíticos nas reações de polimerização e dimerização do eteno. No primeiro estudo, empregamos o Método Hartree-Fock (HF) para avaliar energias e estruturas envolvidas nos passos representativos da dimerização do eteno via complexo catiônico volumoso do tipo Ni(II)-bis[(pirazolil)etil]amina, discutindo o comportamento do complexo ao longo dos passos da dimerização, formação de complexos-π, isomerização da cadeia e baixa probabilidade para trimerização durante o processo de imerização.Nos dois últimos trabalhos descrevemos uma investigação teórica da reação de polimerização do eteno catalisada por complexos catiônicos volumosos Ni(II)-α-diimina. Empregamos a combinação da Teoria do Funcional de Densidade (DFT) e Mecânica Molecular (MM), contida na aproximação ONIOM, para avaliar estruturas e energias dos passos representativos do mecanismo de polimerização do eteno catalisado pelos sistemas de Brookhart e Guan discutindo as influências eletrônicas e do ambiente estéreo imposto pelos ligantes em torno do sítio ativo em cada estágio do processo, enfatizando principalmente ângulos de coordenação da olefina e processo de isomerização da cadeia polimérica em crescimento.

In dieser Dissertation wird ein Prozess für die absorptive CO2-Abtrennung aus Gasströmen vorgestellt, der durch die Nutzung des neu entwickelten Waschmittels GenosorbN in einem Postcombustion-Prozess einen geringeren Energiebedarf als bisher bekannte Verfahren aufweist. Für die Nachrüstung bereits vorhandener Kraftwerke ist der Postcombustion-Prozess vorteilhaft, da er im Vergleich zum IGCC- oder dem Oxyfuel-Verfahren die geringsten Änderungen im Kraftwerksprozess selbst erfordert. Die bisher für die CO2-Abtrennung diskutierten Absorptionsmittel, wie z. B. MEA (Mono-Ethanol-Amin), haben allerdings vor allem in der Regeneration einen sehr hohen Energiebedarf, der vom Kraftwerk zusätzlich zur Verfügung gestellt werden muss. In Zusammenarbeit zwischen dem Institut für Verfahrenstechnik und Umwelttechnik der TU Dresden und der Clariant GmbH wurde das Absorptionsmittel GenosorbN (chemische Bezeichnung: Poly(methyldiglykol)amin) entwickelt. GenosorbN weist als Hybrid-Waschmittel gegenüber CO2 sowohl physikalische als auch chemische Bindungseigenschaften auf. Ausgehend von der Löslichkeitscharakteristik dieses Absorptionsmittels für CO2 und wichtigen Stoffwerten (z. B. Wärmekapazität und Lösungswärme von CO2) wurden mit Hilfe eines umfangreichen Versuchsprogramms an einer Technikumsanlage Betriebsparameter für einen energetisch günstigen technischen Einsatz ermittelt. Dabei hat sich herausgestellt, dass der Absorptionsprozess mit unverdünntem GenosorbN gegenüber einer MEA-Wäsche bei einem CO2-Abscheidegrad von ca. 90 % einen um ca. 20 - 27 % geringeren Energiebedarf in der Waschmittelregeneration aufweisen kann. Außerdem ist für die Desorption ein energetisch minderwertiger Heizdampf mit geringerem Temperatur- bzw. Druckniveau als bei dem MEA-Prozess ausreichend, da die Regenerationstemperatur um 40 - 50 K niedriger ist. Eine zusätzliche Druckabsenkung auf 400 mbar Absolutdruck im Desorber begünstigt die Regeneration deutlich. / This dissertation presents a process for the absorptive CO2-separation from gas streams, which shows a lower energy requirement than established methods by using the newly developed absorption liquid GenosorbN in a postcombustion-process. To retrofit an already existing power plant, the postcombustion-process is advantageous, because it needs the least changes in the power plant-process itself compared to the IGCC- or the Oxyfuel-process. The absorbents discussed for the CO2-separation up to now, for example MEA (mono-ethanol-amine), cause a high energy requirement mainly in the solvent regeneration, which has to be provided additionally from the power plant. The solvent GenosorbN (chemical notation: poly(methyldiglycol)amine) was developed in cooperation between the Institute of Process Engineering and Environmental Engineering of the Technical University of Dresden and the Clariant GmbH. GenosorbN is a hybrid-absorbent and therefore it shows both physical and chemical bonding forces. Based on the solvents characteristic of solubility for CO2 and important data on chemical media (for example heat capacity and enthalpy of solution) operating parameters for an energetic advantageous technical application were identified by a lot of test series at a pilot plant. The measurements show that the absorption process with the undiluted GenosorbN has a circa 20 - 27 % lower energy demand for the solvent regeneration compared to the MEA-process to reach a degree of separation of 90 %. Furthermore a low-value heating steam with lower temperature and therefore lower pressure level suffices because of the significant lower (40 - 50 K) regeneration temperature. An additional pressure reduction to 400 mbar absolute pressure in the regeneration column favours the solvent regeneration considerably.

BECCS (Bioenergy Carbon Capture and Storage) is an important part of measures to achieve zero net emissions globally by 2050, as the technology can create carbon sinks. However, the technology is very energy-intensive and expensive, and affects the existing systems at implementation. The purpose of this study is to investigate the possibility of implementing BECCS at Karlstad Energy's biofuel-fired CHP-plant, Heden 3. The goal is, by simulation in CHEMCAD, to generate energy consumption key figures for two different separation technologies (MEA-MonoEthanolAmine and HPC-HotPotassiumCarbonate) with 90 % separation rate in three different operating cases. In addition, the systemic impact on Heden 3 will be determined by analyzing three different scenarios. In the first scenario fuel consumption is kept unchanged and steam to the carbon capture system is extracted before the turbine. In the second scenario fuel supply increases to meet the district heating needs of the existing system and steam to the carbon capture system is extracted before the turbine. In the third scenario fuel supply is kept unchanged and steam is extracted from the turbine. In addition, the study investigates various transport options for storage of carbon dioxide and finally calculate the total carbon sink Karlstad Energy can contribute to. The results show that production of electricity is reduced by 65-87 % after implementation of MEA and 151-238 % for HPC in the first scenario. Without heat utilization in the carbon capture system, heat production is reduced by 66-86 % with MEA and 54-76% for HPC. In the second scenario, a fuel supply increase by 134 % is required to meet the needs, which corresponds to more than twice the boiler capacity and results in a reduced production of electricity by 247 %. In the third scenario, production of electricity is reduced by 104 % at maximum load with HPC. The HPC system has high-quality heat to utilize, probably enough to meet the district heating needs without increasing the boiler power. But heat optimization opportunities need to be further explored in order to be able to express something to a greater extent. The MEA process does not offer the same opportunities for heat utilization. As the CHP-plant have heat as the main product, HPC would be a more suitable alternative despite the high load on the electricity production. The performance of the carbon dioxide plant seems to vary between different operating cases and it can be concluded that the variation is related to the flue gas composition rather than being load dependent. Transport of carbon dioxide by train has the lowest carbon dioxide emissions and requires the least number of cargoes for transport from Karlstad to storage in Norway. However, this is not relevant at present because of the lack of rail connection to the plant. Total carbon sink is approximately 127 000 tonnes per year if the boiler capacity is assumed to be unchanged. / BECCS (Bioenergy Carbon Capture and Storage) är en viktig del av åtgärder i målet om att nå nollnetto utsläpp år 2050 globalt, då tekniken kan skapa kolsänkor. Tekniken är dock mycket energikrävande och dyr, och påverkar de befintliga systemen vid implementering. Syftet med den här studien är att undersöka möjligheten att implementera BECCS på Karlstad Energis biobränsleeldade kraftvärmeverk, Heden 3. Målet är att, genom simulering i CHEMCAD, ta fram förbrukningsnyckeltal för två olika avskiljningstekniker (MEA-MonoEtanolAmin och HPC-HotPotassiumCarbonate) med 90 % avskiljningsgrad vid tre olika driftfall. Dessutom ska systempåverkan på Heden 3 fastställas genom analys av tre olika scenarier. I första scenariot hålls bränsleförbrukningen oförändrad och ånga till koldioxidavskiljningssystemet tappas av innan turbinen. I det andra scenariot ökar bränsletillförseln för att tillgodose fjärrvärmebehovet i det befintliga systemet och ånga till koldioxidavskiljningssystemet tappas av innan turbinen. I det tredje scenariot hålls bränsletillförseln oförändrad och ånga extraheras från turbinen. Därtill undersöks i studien olika transportmöjligheter till lagringsplats av koldioxiden och slutligen beräknas den totala kolsänkan Karlstad Energi kan bidra med. Resultaten visar att elproduktionen i det första scenariot reduceras med 65-87 % för MEA och för HPC 151-238 %. Utan värmeutnyttjande från koldioxidavskiljningssystemen reduceras värmeproduktionen med 66-86 % med MEA och 54-76 % med HPC. I det andra scenariot krävs att bränsletillförseln ökar med 134 % för att tillgodose behoven vilket motsvarar mer än dubbla panneffekten och innebär en reducerad elproduktion på 247 %. I det tredje scenariot reduceras elproduktionen med 104 % vid maximal last med HPC.  I HPC-systemet finns högvärdig värme att utnyttja, sannolikt tillräckligt mycket för att kunna uppfylla fjärrvärmebehovet utan att öka panneffekten. Men värmeoptimeringsmöjligheter behöver undersökas ytterligare för att kunna uttrycka något i större omfattning. I MEA-processen finns inte samma möjligheter till värmeutnyttjande. Eftersom kraftvärmeverket har värme som främsta produkt skulle således HPC vara ett lämpligare alternativ trots den höga belastningen på elproduktionen. Koldioxidanläggningens prestanda förefaller variera mellan olika driftfall och med en enklare undersökning kunde slutsatsen dras att variationen har ett samband med rökgassammansättningen snarare än att det är ett lastberoende. Transport av koldioxid med tåg har lägst koldioxidutsläpp och kräver minst antal laster för transport från Karlstad till lagring i Norge. Detta är dock inte aktuellt i dagsläget på grund av avsaknaden av räls in till verket. Den totala kolsänkan är cirka 127 000 ton per år om pannan antas köras oförändrat.

<div>Inorganic metal chalcogenide materials are of great importance in the semiconducting field for various electronic applications such as photovoltaics, thermoelectrics, sensors, and many others. Compared to traditional vacuum processing routes, solution processing provides an alternate cost-effective route to synthesize these inorganic materials through its ease of synthesis and device fabrication, higher material utilization, mild processing conditions, and opportunity for roll-to-roll manufacturing. One such versatile solution chemistry involving a mixture of amine and thiol species has evolved in the past few years as a common solvent for various precursor dissolutions including metal salts, metal oxides, elemental metals, and chalcogens.</div><div><br></div><div>The amine-thiol solvent system has been used by various researchers for the fabrication of inorganic materials, but without the complete understanding of the chemistry involved in this system, utilizing its full potential, and overcoming any inherent limitations will be difficult. So, to identify the organometallic complexes and their reaction pathways, the precursor dissolutions in amine-thiol solutions, specifically for elemental metals like Cu, In and chalcogens like Se, Te were studied using X-ray absorption, nuclear magnetic resonance, infrared, and Raman spectroscopy along with electrospray ionization mass spectrometry techniques. These analyses suggested the formation of metal thiolate complexes in the solution with the release of hydrogen gas in the case of metal dissolutions confirming irreversibility of the dissolution. Insights gained for chalcogen dissolutions confirmed the formation of different species like monoatomic or polyatomic clusters when different amine-thiol pair is used for dissolution. Results from these analyses also identified the role of each component in the dissolution which allowed for tuning of the solutions by isolating the complexes to reduce their reactivity and corrosivity for commercial applications.</div><div><br></div><div>After identifying complexes in metal dissolution for Cu and In metals, the decomposition pathway for these complexes was studied using X-ray diffraction and gas chromatography mass spectrometry techniques which confirmed the formation of phase pure metal chalcogenide material with a release of volatile byproducts like hydrogen sulfide and thiirane. This allowed for the fabrication of impurity-free thin-film Cu(In,Ga)S2 material for use in photovoltaic applications. The film fabrication with reduced carbon impurity achieved using this solvent system yielded a preliminary promising efficiency beyond 12% for heavy alkali-free, low bandgap CuInSe2 material. Along with promising devices, by utilizing the understanding of the chalcogen complexation, a new method for CuInSe2 film fabrication was developed with the addition of selenide precursors and elemental selenium which enabled first-ever fabrication of a solution-processed CuInSe2 thin film with thickness above 2 μm and absence of any secondary fine-grain layer.</div><div><br></div><div>Along with thin-film fabrication, a room temperature synthesis route for lead chalcogenide materials (PbS, PbSe, PbTe) with controlled size, shape, crystallinity, and composition of nanoparticle self-assemblies was demonstrated. Micro-assemblies formed via this route, especially the ones with hollow-core morphology were subjected to a solution-based anion and cation exchange to introduced desired foreign elements suitable for improving the thermoelectric properties of the material. Adopting from traditional hot injection and heat up synthesis routes, a versatile synthesis procedure for various binary, ternary, and quaternary metal chalcogenide (sulfide and sulfoselenide) nanoparticles from elemental metals like Cu, Zn, Sn, In, Ga, and Se was developed. This new synthesis avoids the incorporation of impurities like O, Cl, I, Br arising from a traditional metal oxide, halide, acetate, or other similar metal salt precursors giving an opportunity for truly impurity-free colloidal metal chalcogenide nanoparticle synthesis.</div>

In der vorliegenden Arbeit wurden stickstoffhaltige Monomere ausgehend von aromatischen Aminen oder Lactamen durch Umsetzung mit Chlorsilanen synthetisiert. Die so erhaltenen Derivate wurden mit Hilfe spektroskopischer und thermischer Analysenmethoden umfassend charakterisiert. Auf Basis der stickstoffhaltigen Monomere wurden über unterschiedliche Synthesestrategien organisch-anorganische, nanostrukturierte Hybridmaterialien hergestellt. Durch die thermisch induzierte Zwillingspolymerisation der Monomere 2,2‘-Spirobi[3,4-dihydro-1H-1,3,2-benzodiazasilin] und 1,1’,4,4‘-Tetrahydro-2,2‘-spirobi[benzo[d][1,3,2]-oxazasilin] gelang es, Hybridmaterialien bestehend aus Polyanilin-Formaldehyd-Harzen und Polysilazanen bzw. Siliciumdioxid unter Variation der Reaktionstemperatur herzustellen. Die Untersuchung der entstandenen Materialien erfolgte mittels spektroskopischer Methoden. Die Lactam-Monomere wurden durch die Zugabe von Aminocarbonsäuren zu Polyamid 6/SiO2- bzw. Polysiloxan-Kompositen umgesetzt. Hier stand die Ermittlung der molekularen Struktur, wie auch die Bestimmung des thermischen Verhaltens und der Homogenität der Materialien im Vordergrund. Es konnte gezeigt werden, dass die Synthese der thermoplastischen Kompositmaterialien auch in vergrößertem Maßstab reproduzierbar ist und die Produkte zudem zu Folien extrudierbar sind. / In the present work nitrogen-containing monomers have been synthesized by reactions of silicon tetrachloride with amines or lactames and were characterized by different spectroscopic and thermal analysis methods. The twin monomers 2,2‘-spirobi[3,4-dihydro-1H-1,3,2-benzodiazasiline] and 1,1’,4,4‘-tetrahydro-2,2‘-spirobi[benzo[d][1,3,2]¬oxazasiline] can be converted to hybrid materials containing polyaniline-formaldehyde resins and polysilazane or SiO2 by thermal induced twin polymerization under variation of the reaction temperature. The obtained nano composites were investigated by spectroscopic methods and electron microscopy. The lactam containing monomers were polymerized to polyamide 6/SiO2-composites by addition of aminocarbonic acids and -caprolactam. The analysis of the molecular structure as well as the investigation of the thermal behavior and the homogeneity of materials was emphasized. It could be shown, that the synthesis can be performed reproducible. Furthermore, it is possible to extrude the thermoplastic composite materials to films.

No description available.

Isocyanate sind wichtige Zwischenstufen bei der Herstellung zahlreicher Alltagsprodukte, von Matratzen über Lacke und Beschichtungen bis hin zu Kosmetika. Die industrielle Herstellung erfolgt mit Hilfe des reaktiven und giftigen Gases Phosgen. Im Rahmen der vorliegenden Dissertation wird ein vierstufiger Prozess zur phosgenfreien Synthese von Isocyanaten untersucht. Ausgehend von Aminen werden N-Silylamine erzeugt, die im Anschluss mit CO2 zur Reaktion gebracht werden. Dabei bilden sich O-Silylcarbamate, die bereits die NCO-Einheit der Isocyanate tragen. Durch eine N-Silylierung werden N,O-Bis(silyl)carbamate gebildet. Die Stoffklassen der silylierten Carbamate werden durch diese Dissertation um mehrere, bislang unbekannte Vertreter erweitert. Die anschließende thermische Zersetzung liefert erfolgreich die gewünschten Isocyanate. Als Spaltprodukt bildet sich das ungiftige, inerte Hexamethyldisiloxan. Mit diesem patentierten Verfahren gelingt es, CO2 als Kohlenstoff- und Sauerstoffquelle in industriell wichtige Monoisocyanate zu überführen. Die Anwendung auf Diisocyanate wird beleuchtet und erzeugt Potenzial für fortführende Arbeiten.