Les dérivés cyclopropanoïques sont des composés importants dans plusieurs domaines tels que la synthèse organique, la chimie médicinale et la science des matériaux. La synthèse asymétrique des dérivés cyclopropanoïques s'est de plus en plus concentrée sur la synthèse stéréocontrolée de cyclopropanes polysubstitutés qui arborent toute une gamme de substituants distincts. Ces méthodes permettent d’accéder à des synthèses divergentes pour préparer des composés pharmaceutiques comportant cette sous-unité. De plus, l'ouverture facile de ce cycle très tendu en fait une bonne cible pour étudier l'activation de la liaison C‒C. C’est pourquoi les cyclopropanes sont parmi les composés les plus attrayants et les plus diversifiés en synthèse organique. La synthèse divergente de dérivés cyclopropanoïques repose sur l'utilisation de précurseurs stables mais réactifs. L'une des réactions pour former des liaisons C‒C les plus couramment utilisées dans la fonctionnalisation à un stade avancé, est la réaction de couplage croisé de Suzuki-Miyaura. C'est l'une des raisons pour lesquelles les borocyclopropanes sont devenus des précurseurs synthétiques attrayants pour la fonctionnalisation et diversification des molécules complexes. L’accès à de telles molécules faciliterait la préparation de molécules cyclopropanoïques de structures diversifiées. Il est difficile de préparer des borocyclopropanes de manière énantiosélective. Dans cette thèse, une cyclopropanation énantiosélective d'acides boroniques protégés dérivés d'alcools allyliques a été réalisée via la réaction de cyclopropanation asymétrique en présence du ligand chiral de type dioxaborolane. Le développement de cette méthodologie a nécessité une modification de la décomplexation oxydative existante du dioxaborolane via son complexe dérivé de la diéthanolamine. Le protocole est maintenant applicable aux dérivés boronates qui incluent des groupements fonctionnels qui sont incompatibles avec les bases. Les borocyclopropanes tétracoordonnés obtenus permettent également la formation de liaisons C‒C et ont démontré une stabilité améliorée par rapport à leurs dérivés tricoordonnés. Une étude plus approfondie sur des complexes cyclopropylméthylamine-boranes (CAB) a démontré que ces derniers pouvaient conduire aux amine-boranes spirocycliques (SCAB). Ces SCAB ont été obtenus grâce à une cascade d'activation des CABs en utilisant le bis(trifluorométhanesulfonimide) (Tf2NH) comme initiateur. L'ouverture du cycle des CAB représente la première conversion des cyclopropanes en spirocycles contenant à la fois un N-spirocentre et un spiro amine-borane. Les amine-boranes ont démontré une activité pharmacologique telle que des propriétés anticancéreuses, anti-inflammatoires et anti-ostéoporotiques. L'incorporation de spirocycles dans un motif augmente le caractère sp3 et la chiralité inhérente. Les SCAB rendent alors des candidats attrayants pour la conception de médicaments. La réaction de SCAB avec de Tf2NH en quantités stoechiométriques a donné un complexe SCAB•NTf2 qui est capable de réduire les fonctions cétone, aldéhyde, imine, nitrobenzène, nitrosobenzène, anthracène, indole et aryl méthyl éther. Le complexe SCAB•NTf2 est également capable de réduire le diphénylacétylène de manière Z-sélective en cis-stilbène. Des études spectroscopiques approfondies ont donné plus d'informations sur la structure de SCAB•NTf2 et nous ont permis de proposer un mécanisme de réduction des groupements fonctionnels ci-dessus. Les études spectroscopiques (RMN, IR et Raman) ont également révélé l'implication d'une liaison α-C‒H au bore dans une liaison hydrogène hypsochromique « improper hydrogen bond » avec [Tf2N]-. L'hyperconjugaison avec l’atome de bore, un acide de Lewis, est proposée, ce qui rend la liaison C‒H acide et donc suffisamment polarisée pour agir comme un donneur de pont hydrogène. / Cyclopropane derivatives are incredibly versatile building blocks used in organic synthesis, medicinal chemistry, and materials science. The asymmetric synthesis of cyclopropane derivatives has increasingly focused on achieving polysubstituted cyclopropanes with a range of distinct substituents and their use in divergent syntheses to access pharmaceutical compounds. Moreover, the ring-opening potential of the cyclopropane ring, due to its inherent strain, makes it a facile target for C‒C bond activation and one of the most attractive and diverse cycloalkanes in organic synthesis. Divergent synthesis of cyclopropanes relies on stable pre-installed handles on cyclopropanes that can be activated readily. One of the most common C‒C bond formation approaches used in late-stage functionalization is the Suzuki-Miyaura cross-coupling reaction. As a result, borocyclopropanes have become attractive synthetic building blocks for their use in late-stage functionalization. Methods for the enantioselective synthesis of borocyclopropanes are scarce. In this thesis, the first enantioselective cyclopropanation of an allylic alcohol bearing a tetracoordinate boronate has been achieved via the Charette dioxaborolane-mediated enantioselective cyclopropanation reaction. The development of our method required modification of the existing oxidative decomplexation of dioxaborolane via diethanolamine. The protocol has now been expanded to include boronates and base-sensitive functionalities. The tetracoordinate borocyclopropane obtained was also shown to undergo C‒C bond formation and demonstrated enhanced stability compared to its tricoordinate boronate derivative. Further investigation of boron tethered cyclopropanes led to the discovery of the unique transformation of cyclopropane amine-boranes (CABs) to spirocyclic amine-boranes (SCABs). SCABs were obtained through a cascade activation of CAB via bis(trifluoromethane)sulfonimide (Tf2NH). The ring-opening of CABs represents the first conversion of cyclopropanes to spirocycles containing an N-spirocenter and furthermore an amine-borane spirocore. Amine-boranes have shown pharmacological activity such as anti-cancer, anti-inflammatory, and anti-osteoporotic properties. Incorporating spirocycles into a motif increases sp3 character and inherent chirality, rendering SCABs as attractive candidates for drug design. The reaction of SCAB with stoichiometric amounts of Tf2NH resulted in a SCAB•NTf2 complex that was found to be able to reduce ketone, aldehyde, imine, nitrobenzene, nitrosobenzene, anthracene, and indole functionalities as well as demethylate aryl methyl ethers. The SCAB•NTf2 complex was also capable of reducing diphenylacetylene in a Z-selective manner to cis-stilbene. In-depth spectroscopic studies revealed the structure of SCAB•NTf2 and a mechanism for the reduction of the above functionalities is proposed. The spectroscopic studies (NMR, IR and Raman) revealed the involvement of an α-C‒H bond to boron in improper hydrogen bonding with [Tf2N]-. Hyperconjugation to the Lewis acidic boron is proposed to make the C‒H bond acidic and therefore polarized enough to act as a hydrogen bond donor.

<p dir="ltr">Transitioning to a carbon-neutral future will require a broad portfolio of green energy generation and storage solutions. With the abundant availability of solar radiation across the Earth’s surface, energy generation from photovoltaics (PVs) will be an important part of this green energy portfolio. While silicon-based solar cells currently dominate the PV market, temperatures exceeding 1000 °C are needed for purification of silicon, and batch processing of silicon wafers limits how rapidly Si-based PV can be deployed. Furthermore, silicon’s indirect band gap necessitates absorber layers to exceed 100 µm thick, limiting its applications to rigid substrates.</p><p dir="ltr">Solution processed thin-film solar cells may allow for the realization of continuous, high-throughput manufacturing of PV modules. Thin-film absorber materials have direct band gaps, allowing them to absorb light more efficiently, and thus, they can be as thin as a few hundred nanometers and can be deposited on flexible substrates. Solution deposition of these absorber materials utilizing molecular precursor-based inks could be done in a roll-to-roll format, drastically increasing the throughput of PV manufacturing, and reducing installation costs. In this dissertation, solution processed synthesis and the characterization of two emerging direct band gap absorber materials consisting of earth abundant elements is discussed: the enargite phase of Cu₃AsS₄ and the distorted perovskite phase of BaZrS₃.</p><p dir="ltr">The enargite phase of Cu₃AsS₄ (ENG) is an emerging PV material with a 1.42 eV band gap, making it an ideal single-junction absorber material for photovoltaic applications. Unfortunately, ENG-based PV devices have historically been shown to have low power conversion efficiencies, potentially due to defects in the material. A combined computational and experimental study was completed where DFT-based calculations from collaborators were used inform synthesis strategies to improve the defect properties of ENG utilizing new synthesis techniques, including silver alloying, to reduce the density of harmful defects.</p><p dir="ltr">Chalcogenide perovskites are viewed as a stable alternative to halide perovskites, with BaZrS₃ being the most widely studied. With a band gap of 1.8 eV, BaZrS₃ could be an excellent wide-bandgap partner for a silicon-based tandem solar cell.Historically, sputtering, and solid-state approaches have been used to synthesize chalcogenide perovskites, but these methods require synthesis temperatures exceeding 800 °C, making them incompatible with the glass substrates and rear-contact layers required to create a PV device. In this dissertation, these high synthesis temperatures are bypassed through the development of a solution-processed deposition technique.A unique chemistry was developed to create fully soluble molecular precursor inks consisting of alkaline earth metal dithiocarboxylates and transition metal dithiocarbamates for direct-to-substrate synthesis of BaZrS₃ and BaHfS₃ at temperatures below 600 °C.</p><p dir="ltr">However, many challenges must be overcome before chalcogenide perovskites can be used for the creation of photovoltaic devices including oxide and Ruddlesden-Popper secondary phases, isolated grain growth, and deep level defects. Nevertheless, the development of a moderate temperature solution-based synthesis route makes chalcogenide perovskite research accessible to labs which do not have high temperature furnaces or sputtering equipment, further increasing research interest in this quickly developing absorber material.</p>

No description available.

CO2 capture and storage (CCS) is estimated to reduce 14% of the global CO2 emissions in the 2 °C scenario presented by the International Energy Agency. Moreover, post combustion capture is identified as a potential method for CO2 capture from industry since it can be easily retrofitted without disturbing the core industrial process. Among the post-combustion capture methods, absorption using mono-ethanol amine (MEA) is the most mature technology that has been demonstrated at plant scale. However, using chilled ammonia process as a post combustion capture technology in a cement industry can reduce 47% energy penalty for CO2 capture when compared to the conventional MEA absorption method.  Hence, the current project aims at analyzing the chilled ammonia process when integrated with steel and ammonia plants. Key performance indicator like specific primary energy consumption per kilogram of CO2 avoided (SPECCA) is estimated and compared with MEA absorption method. Firstly, chilled ammonia process (CAP) for cement plant was used as reference case. Then, CAP for steel and ammonia processes was optimized by the means of the decision variables affecting the capture and energy efficiency. The energy consumption per kg CO2 captured and SPECCA was lower for the higher CO2 concentration in the flue gas. Results for SPECCA were 3,56, 3,52 and 3,61 MJ/kg CO2 for cement, steel, and ammonia plants, respectively.

The critically important nature of radical and radical ion mechanisms in biology and chemistry continues to be recognized as our understanding of these unique transient species grows. The work presented herein demonstrates the versatility of kinetic studies for understanding the elementary chemical reactions of radicals and radical ions. Chapter 2 discusses the use of direct ultrafast kinetics techniques for investigation of crucially important enzymatic systems; while Chapter 3 demonstrates the value of indirect competition kinetics techniques for development of synthetic methodologies for commercially valuable classes of compounds. The mechanism of decay for aminyl radical cations has received considerable attention because of their suspected role as intermediates in the oxidation of tertiary amines by monoamine oxygenases and the cytochrome P450 family of enzymes. Radical cations are believed to undergo deprotonation as a key step in catalysis. KIE studies performed by previous researchers indicate N,N-dimethylaniline radical cations deprotonate in the presence of the bases acetate and pyridine. By studying the electrochemical kinetics of the reaction of para substituted N,N-dimethylaniline radical cations with acetate anion, we have produced compelling evidence to the contrary. Rather than deprotonation, acetate reacts with N,N-dimethylaniline radical cation by electron transfer, generating the neutral amine and acetoxyl radical. Transport properties of reactants and solvent polarity changes were investigated and confirmed not to influence the electrochemical behavior forming the basis for our mechanistic hypothesis. To reconcile our conclusion with earlier results, KIEs were reinvestigated electrochemically and by nanosecond laser flash photolysis. Rather than a primary isotope effect (associated with C-H bond cleavage), we believe the observed KIEs are secondary, and can be rationalized on the basis of a quantum effect due to hyperconjugative stabilization in aromatic radical cations during an electron transfer reaction. Product studies performed by constant potential coulometry indicate N,N-dimethylaniline radical cations are catalytic in carboxylate oxidations. Collectively, our results suggest that aminyl radical cation deprotonations may not be as facile as was previously thought, and that in some cases, may not occur at all. Interest in design and synthesis of selenium containing heterocycles stems from their ability to function as antioxidants, anti-virals, anti-inflammatories, and immunomodulators. To establish synthetic feasibility of intramolecular homolytic substitution at selenium for preparation of selenocycles, we set out to determine what factors influence cyclization kinetics. A series of photochemically labile Barton and Kim esters have been syntheisized and employed as radical precursors. The effect of leaving radical stability on kinetics has been investigated through determination of rate constants and activation parameters for intramolecular homolytic substitution of the corresponding radicals via competition experiments. Notable leaving group effects on measured kinetic parameters show more facile reactions for radical precursors with more stable leaving radicals. Moreover, cyclizations to form six-membered (as opposed to five- membered) ring systems exhibited order of magnitude decreases in rate constants for a given leaving radical. Our results are congruent with expectations for radical cyclizations trends for the varied experimental parameters and suggest homolytic substitution affords a convenient means for synthesis of selenocycles. / Ph. D.

No / Novel 1- and 1,4-substituted chloroethylaminoanthraquinones with DNA binding and alkylating properties along with their respective hydroxyethylaminoanthraquinone intermediates were synthesized. Selected chloroethylaminoanthraquinones were shown to cross-link DNA and alkylate guanines (at low nM concentration) with a preference for reaction sites containing 5'-PyG. A compound (Alchemix) with the bis-chloroethyl functionality confined to one side chain alkylated but did not cross-link DNA. All the 1,4-disubstituted chloroethylaminoanthraquinones were potently cytotoxic (nM IC50s) against cisplatin-resistant ovarian cancer cell lines.

Hydrocracking and hydrotreating are bitumen upgrading technologies designed to enhance fuel quality by decreasing its density, viscosity, boiling point and heteroatom content via hydrogen addition. The aim of this thesis is to model and simulate an upgrading and integrated gasification combined cycle then to evaluate the feasibility of integrating slurry hydrocracking, trickle-bed hydrotreating and residue gasification using the Aspen HYSYS® simulation software. The close-coupling of the bitumen upgrading facilities with gasification should lead to a hydrogen, steam and power self-sufficient upgrading facility with CO2 capture. Hydrocracker residue is first withdrawn from a 100,000 BPD Athabasca bitumen upgrading facility, characterized via ultimate analysis and then fed to a gasification unit where it produces hydrogen that is partially recycled to the hydrocracker and hydrotreaters and partially burned for power production in a high hydrogen combined cycle unit. The integrated design is simulated for a base case of 90% carbon capture utilizing a monoethanolamine (MEA) solvent, and compared to 65% and no carbon capture scenarios. The hydrogen production of the gasification process is evaluated in terms of hydrocracker residue and auxiliary petroleum coke feeds. The power production is determined for various carbon capture cases and for an optimal hydrocracking operation. Hence, the feasibility of the integration of the upgrading process and the IGCC resides in meeting the hydrogen demand of the upgrading facility while producing enough steam and electricity for a power and energy self-sufficient operation, regardless of the extent of carbon capture.

Hydrocracking and hydrotreating are bitumen upgrading technologies designed to enhance fuel quality by decreasing its density, viscosity, boiling point and heteroatom content via hydrogen addition. The aim of this thesis is to model and simulate an upgrading and integrated gasification combined cycle then to evaluate the feasibility of integrating slurry hydrocracking, trickle-bed hydrotreating and residue gasification using the Aspen HYSYS® simulation software. The close-coupling of the bitumen upgrading facilities with gasification should lead to a hydrogen, steam and power self-sufficient upgrading facility with CO2 capture. Hydrocracker residue is first withdrawn from a 100,000 BPD Athabasca bitumen upgrading facility, characterized via ultimate analysis and then fed to a gasification unit where it produces hydrogen that is partially recycled to the hydrocracker and hydrotreaters and partially burned for power production in a high hydrogen combined cycle unit. The integrated design is simulated for a base case of 90% carbon capture utilizing a monoethanolamine (MEA) solvent, and compared to 65% and no carbon capture scenarios. The hydrogen production of the gasification process is evaluated in terms of hydrocracker residue and auxiliary petroleum coke feeds. The power production is determined for various carbon capture cases and for an optimal hydrocracking operation. Hence, the feasibility of the integration of the upgrading process and the IGCC resides in meeting the hydrogen demand of the upgrading facility while producing enough steam and electricity for a power and energy self-sufficient operation, regardless of the extent of carbon capture.

In der vorliegenden Arbeit wurden stickstoffhaltige Monomere ausgehend von aromatischen Aminen oder Lactamen durch Umsetzung mit Chlorsilanen synthetisiert. Die so erhaltenen Derivate wurden mit Hilfe spektroskopischer und thermischer Analysenmethoden umfassend charakterisiert. Auf Basis der stickstoffhaltigen Monomere wurden über unterschiedliche Synthesestrategien organisch-anorganische, nanostrukturierte Hybridmaterialien hergestellt. Durch die thermisch induzierte Zwillingspolymerisation der Monomere 2,2‘-Spirobi[3,4-dihydro-1H-1,3,2-benzodiazasilin] und 1,1’,4,4‘-Tetrahydro-2,2‘-spirobi[benzo[d][1,3,2]-oxazasilin] gelang es, Hybridmaterialien bestehend aus Polyanilin-Formaldehyd-Harzen und Polysilazanen bzw. Siliciumdioxid unter Variation der Reaktionstemperatur herzustellen. Die Untersuchung der entstandenen Materialien erfolgte mittels spektroskopischer Methoden. Die Lactam-Monomere wurden durch die Zugabe von Aminocarbonsäuren zu Polyamid 6/SiO2- bzw. Polysiloxan-Kompositen umgesetzt. Hier stand die Ermittlung der molekularen Struktur, wie auch die Bestimmung des thermischen Verhaltens und der Homogenität der Materialien im Vordergrund. Es konnte gezeigt werden, dass die Synthese der thermoplastischen Kompositmaterialien auch in vergrößertem Maßstab reproduzierbar ist und die Produkte zudem zu Folien extrudierbar sind. / In the present work nitrogen-containing monomers have been synthesized by reactions of silicon tetrachloride with amines or lactames and were characterized by different spectroscopic and thermal analysis methods. The twin monomers 2,2‘-spirobi[3,4-dihydro-1H-1,3,2-benzodiazasiline] and 1,1’,4,4‘-tetrahydro-2,2‘-spirobi[benzo[d][1,3,2]¬oxazasiline] can be converted to hybrid materials containing polyaniline-formaldehyde resins and polysilazane or SiO2 by thermal induced twin polymerization under variation of the reaction temperature. The obtained nano composites were investigated by spectroscopic methods and electron microscopy. The lactam containing monomers were polymerized to polyamide 6/SiO2-composites by addition of aminocarbonic acids and -caprolactam. The analysis of the molecular structure as well as the investigation of the thermal behavior and the homogeneity of materials was emphasized. It could be shown, that the synthesis can be performed reproducible. Furthermore, it is possible to extrude the thermoplastic composite materials to films.

Los embutidos fermentados ligeramente acidificados son un grupo de productos tradicionales mediterráneos, caracterizados por un pH superior a 5,3.Para un control eficiente de la seguridad microbiológica de los embutidos se necesitan técnicas rápidas para la identificación y recuento de los microorganismos patógenos a estudiar. En el presente trabajo, se desarrolló una técnica para la enumeración de L. monocytogenes que combinó el método del número más probable y la identificación mediante PCR específica. Para la detección de Salmonella spp. y L. monocytogenes se desarrolló un sistema de PCR-multiplex que permitió la identificación de ambos patógenos de forma simultánea en una sola reacción.El estudio de la calidad microbiológica de los embutidos fermentados ligeramente acidificados se completó con la caracterización de las comunidades microbianas más importantes en estos productos. Se identificaron a nivel de especie los aislados de bacterias del ácido láctico (BAL), de enterococos y de cocos gram-positivos catalasa-positivos (CGC+). Posteriormente se realizó una tipificación molecular de los mismos mediante RAPD y análisis del perfil plasmídico y se estudiaron las principales características de interés higiénico-sanitario y tecnológico de las cepas.Mediante PCR se identificó Lactobacillus sakei como la especie predominante (74%), seguida por Lactobacillus curvatus (21,2%). La actividad aminoácido-descarboxilasa se asoció a la especie L. curvatus (el 66% de los aislados presentaron esta actividad).La identificación de los enterococos se realizó mediante PCR-multiplex y por secuenciación del gen sodA. Enterococcus faecium fue la especie de enterococos predominante (51,9%) seguida por Enterococcus faecalis (14,2%).Todas las cepas de E. faecalis presentaron genes asociados a factores de virulencia. E. faecalis presentó mayor resistencia a antibióticos que el resto de las especies de enterococos estudiadas. Tan sólo una cepa de E. faecium presentó el genotipo vanA (que confiere resistencia de alto nivel a la vancomicina).La identificación de los aislados de CGC+ (mediante PCR específica y amplificación de la región intergénica 16S-23S ARNr) demostró que Staphylococcus xylosus es la especie predominante en los embutidos fermentados ligeramente acidificados (80,8%).La amina biógena más común en los CGC+ fue la feniletilamina, producida por un 10,8% de aislados. Un pequeño porcentaje de aislados fueron mecA+ (4,6%), presentando además resistencia a múltiples antibióticos. El potencial enterotoxigénico de las cepas de CGC+ fue muy reducido (3,3% de los aislados), detectándose únicamente el gen entC.El estudio pormenorizado de las comunidades bacterianas de interés permitió la selección de 2 cepas de L. sakei y 2 cepas de S. xylosus con características tecnológicas e higiénico-sanitarias óptimas. Para evaluar su efectividad como cultivos iniciadores se elaboraron dos tipos de embutidos ligeramente ácidos, chorizo y fuet, inoculados con microorganismos patógenos (Salmonella spp., L. monocytogenes y S. aureus). El uso de cultivos iniciadores permitió el control de L. monocytogenes, Enterobacteriaceae y Enterococcus así como del contenido en aminas biógenas. Los recuentos de Salmonella spp. disminuyeron de forma significante durante la maduración de los embutidos, independientemente del uso de cultivos iniciadores. El uso del tratamiento de alta presión (400 MPa) en los embutidos madurados consiguió la ausencia de Salmonella spp. en los lotes tratados. / Low-acid fermented meat products (final pH, 5.3 to 6.2) are a group of traditional Mediterranean products with a great diversity within the regions.To control the microbial quality of this kind of sausages is necessary to use rapid methods able to produce results quickly and reliably. In this study, a highly sensitive PCR-based method to detect and quantify L. monocytogenes in fermented sausages was developed. This method combined the high sensitivity of the most-probable-number method with a L. monocytogenes specific PCR assay. Also a multiplex-PCR based method for the simultaneous identification of L. monocytogenes and Salmonella spp. was designed. The study of the microbial quality of the slightly fermented sausages was followed by the characterization of the microbial communities of this kind of products. Lactic acid bacteria (LAB), enterococci and Gram-positive catalase-positive cocci (GCC+) were identified at species level. RAPD-PCR and plasmid profiling were used to evaluate the genetic diversity within species and to identify identical isolates of the same strain. Safety and hygienic properties were also studied in order to characterize the isolates in detail. With this aim, bacteriocin production, biogenic amine production and antibiotic susceptibility were determined. By species-specific PCR, Lactobacillus sakei was identified as the predominant LAB (74%) followed by Lactobacillus curvatus (21.2%) and Leuconostoc mesenteroides (4.8%). The production of biogenic amines was mainly related to the species L. curvatus (66% of the isolates were biogenic amine-producers).Species-specific PCR and partial sequencing of sodA gene were used to identify enterococcal population. Enterococcus faecium was the most frequently isolated species (51.9%) followed by Enterococcus faecalis (14,2%). All the E. faecalis strains carried virulence genes. E. faecalis showed higher antibiotic resistance than the other species. Only one E. faecium strain showed vanA genotype (high-level resistance to glycopeptides).Species-specific PCR and amplification of the 16S-23S rDNA intergenic region were used to identify GCC+ population. Staphylococcus xylosus was the predominant species (80.8%) in this kind of sausages.Tyramine was the most intense biogenic amine produced, although by only 4.6% of the GCC+ isolates. Phenylethylamine was more frequently detected (10.8% of isolates) but at lower levels. A low percentage of isolates (4.6%) showed mecA genes displaying also resistance to multiple antibiotics. Only 3.3% of isolates showed staphylococcal enterotoxins genes, all identified as entC gene.The study of the safety and technological properties of the isolates allowed to select 2 strains of L. sakei and 2 strains of S. xylosus on the basis of their technological and safety characteristics. To evaluate their suitability as starter cultures two types of low acid fermented sausages, fuet and chorizo, were manufactured. Batters were inoculated with L. monocytogenes, S. enterica and S. aureus. Starter cultures were able to control the growth of L. monocytogenes, Enterobacteriaceae, Enterococcus and the biogenic amine content. Salmonella spp counts decreased significantly during ripening independently of the use of starter culture and product.High hydrostatic pressure treatment was necessary to assure absence of Salmonella spp. in final products.