Periodically perforated sheets(PS) are ubiquitous in nature as well as in engineered artifacts developed for aerospace, automotive, marine, nuclear and structural applications. PS are indispensable for saving weight and cost for aircraft; for enhancing safety and integrity of heat exchangers used in nuclear and thermal power stations. Ancient PS grills and lattice frames dating back to 1000 BC continue to inspire contemporary art and architecture, buildings and furniture. PS design and analysis, however, is a complex affair stemming from the inherent configurational anisotropy induced by periodicity. In addition, complex boundary conditions complicate the analysis. Unlike atoms in crystalline media, both shape and periodicity of perforations control this anisotropic nature. This thesis explores theoretical and numerical strategies for evaluating the effective anisotropic elastic moduli of PS. Following an experimental prelude for visualizing the PS stress field in a photoelastic sheet and a brief review of PS theory, this thesis proposes a novel theoretical numerical hybrid method for determining the Airy stress function constants. The proposed hybrid method can be exploited experimentally using automated vision based imaging technologies to measure the boundary displacements noninvasively. For determining the Airy constants periodic boundary conditions to the unit cell are applied, the displacement components around the PS hole boundary are obtained using FEM. Using these constants the PS stress field is reconstructed to assess the efficacy of the proposed hybrid method. It is observed that in general while the actual and the reconstructed stress fields agree reasonably well, more refined boundary data obtained either numerically or experimentally can enhance the accuracy further. The thesis then makes an extensive presentation of anisotropic moduli in a variety of PS designs configured on rectangular or square layouts. Conventional as well as some exotic patterns with cusps and satellite holes are examined, and the results are presented graphically to aid the designer. Finally, some special topics pertaining PS design and analysis are discussed to help overcome the inherent limitations of solutions based on applying periodic boundary conditions. In this vein, strategies for achieving a functionally graded PS are presented by altering the pitch and hole size. These strategies assume importance near boundaries as well as near concentrated forces inducing stress gradients. Other special topics include the applicability of tensor transformation rule to PS anisotropy. The effective bulk modulus which remains a scalar invariant is exploited to assess the validity of tensor transformation in a square PS. The rule of mixture widely used in homogenization of composite media is also discussed briefly. Thus, this thesis makes an attempt to demonstrate the power of blending micromechanics with experiments and FEM to aid in PS design and analysis.

Physical systems having dimensions smaller than, or of the same order of magnitude as, the characteristic length scale relevant to a physical property are referred to as mesoscopic physical systems. Due to the dimensions of the system, several physical properties get affected and this could reveal interesting physics which would other-wise have not been apparent. In the recent times, a lot interesting applications have resulted from such studies. The fundamental length scale in ferromagnetic systems is the exchange length. It is related to the magnetic anisotropy and exchange constants. Other length scales such as the size of a magnetic domain or a domain wall depends on the minimisation of energy associated with this length scale along with other factors such as zeeman energy, magnetostatic, magnetoelastic and anisotropy energies. Ultrathin magnetic films have thickness smaller than the exchange length. In this thickness regime, the surface of the film plays an important role. The magnetic anisotropy energy would get a significant contribution from the surface of the film and if it dominates over the volume contribution, would eventually lead to magnetisation pointing out of the plane of the film as opposed to imposition of demagnetising fields. Examples for such cases are FePt(L10 phase) films and Co(0001) films. Such films are important in memory applications where perpendicularly magnetised recording media are desired. When the lateral dimensions of thin films are reduced, demagnetising fields become even more important. Depending on the anisotropy in the system, certain domain patterns get stabilised in the final structure. This has led to important applications in the field of magnonics. The use of angular momentum transfer from spin polarised electrons to change the configuration of magnetisation of structured magnetic films has led to interesting memory and oscillator applications. The underlying physical parameter that needs to be controlled and carefully studied in all these cases is the magnetic anisotropy. It is favourable to have uniaxial magnetic anisotropy for memory and oscillators. This thesis chiefly deals with Fe/GaAs(001) systems. The choice of the physical system follows interest in spintronics where spin injection is desired into a semiconductor from a ferromagnet. The thesis is organized into chapters as follows. Chapter 1 attempts to introduce the reader to some of the basic concepts of mag-netism and some magnetic phenomena. The characteristic nature of a ferro-magnetic material is its spontaneous magnetisation due to long range ordering below the Curie temperature. But the moment is coupled, through some in-teractions, to spatial co-ordinates which leads to spatial variation of magnetic properties. Such interactions are also responsible for the formation of magnetic domains. The spatial variation of magnetic properties within a ferromagnet is called magnetic anisotropy. A major part of the thesis deals with the study of magnetic anisotropy of Fe thin films grown on GaAs(001) substrates. For a better understanding, the structure of the semiconductor is introduced first before discussing the influence of the structure of GaAs on the growth of Fe. A short description of the uniaxial magnetic anisotropy in Fe films is given before starting on an exploration of some possible reasons for it. Concepts of ferromagnetic resonance, spin torque effect and micromagnetic simulations are given. Chapter 2 gives a brief description of some of the experimental apparatus that was setup during the course of the research along with an overview of the differ-ent sample preparation and characterisation techniques used. The chapter is organised according to the general functionality of the techniques. Some con-cepts such as the use of low energy electrons, nanostructuring etc are introduced along with the corresponding techniques since it is best understood along with the instrumentation. Chapter 3 reports some surprising findings about the in-plane magnetic anisotropy in Fe films grown on an MgO underlayer. Until now, it has been understood that such films should exhibit only a four-fold magnetic anisotropy within the plane of the film. But the Fe/MgO/GaAs(001) films studied here exhibited an in-plane uniaxial magnetic anisotropy(IPUMA). IPUMA is dominant upto about 25 ML of Fe in case of Fe/MgO/GaAs(001) films whereas, in Fe/GaAs(001) films it is dominant only upto about 15 ML. Thus, the presence of the MgO film even appeared to enhance the uniaxial anisotropy as compared to the Fe/GaAs(001) films. In the ferromagnetic resonance (FMR) spectra, as many as three peaks were observed in Fe/GaAs(001) films of thickness 50 ML close to the hard axis of magnetisation. This means that three could be three energy minima possibly due to a competition between the anisotropies involved. Chapter 4 elaborates the investigations of the effect of orientation and doping con-centration of the GaAs substrate on the magnetic anisotropy of Fe/GaAs(001) films. It is found that doping the substrate (n type) reduces the strength of the IPUMA in Fe/GaAs films. In the wake of the long-standing debate of electronic structure v/s stress as the origin of the IPUMA in Ferromagnet/Semiconductor films, this result is important because it implies that the electronic structure of the Fe/GaAs interface influences the magnetic anisotropy. But stress, as a cause of IPUMA cannot be ruled out. The influence of deposition techniques on magnetic anisotropy is also investigated. Chapter 5 presents a way of manipulating magnetic anisotropy, and hence mag-netisation dynamics, by nanostructuring of epitaxial Fe films. It is based on the property that magnetic anisotropy of Fe films is thickness dependent. It is demonstrated that using techniques of nanostructuring, a 2 dimensional mag-netic system with controllable variation of local magnetic anisotropy is created. Such a system could be a potential magnonic crystal. chapter 6 demonstrates the proof of concept of a new memory device where memory is stored in the magnetic domain configuration of a ring in relation to that of a nano-wire. Switching between the memory states is acheived through spin trasfer torque of an electric current passing through the device, whereas read-out of the memory state is through the measurement of resistance of the device. Devices are made using NiFe and Co; it is seen that the behaviour of the devices can be explained taking into account the anisotropic magnetoresistance of the material used. Finally, the various results are summarised and a broad outlook is given. Some possible future research related to the topics dealt within this thesis is discussed.

The goal of this thesis is to develop a hybrid _nite element formulation to carry out stress analysis of arteries. To the best of our knowledge, a hybrid _nite element impel mentation of the Holzapfel-Ogden artery model has not been carried out before. Since arteries are thin `shell-type' structures, they are subjected to membrane, shear and volumetric locking in case when standard _nite elements are used. Since hybrid _nite elements are known to overcome these problems, we develop hybrid hexahedral element formulations (both lower and higher-order) for artery analysis. We demonstrate The better coarse mesh accuracy of hybrid elements, which are based on a two-_eld variational formulation, over conventional displacement based elements. Typically, wend that three or four extra levels of renement are required with conventional elements to achieve the ame accuracy as hybrid elements. The recently proposed Holzapfel-Ogden constitutive model for the artery and its implementation both within the conventional and hybrid _nite element frameworks is discussed. The numerical implementation is particularly challenging due to the presence of _bers which can only take tensile loads. The mathematically exact tangent stiness matrix that we have derived in this work is crucial in ensuring convergence of the numerical strategy.

Le contexte général de ce travail est le développement et l'intégration de nouveaux matériaux magnétiques ayant des propriétés originales et d'intérêt potentiel pour la spintronique. En tant que matériau ferromagnétique d’aimantation nulle, le composé Sm1-xGdxAl2 (SGA) suscite un intérêt particulier, puisqu’il est capable, dans son état magnétique compensé, de polariser en spin un courant d’électrons. Dans un premier temps, des expériences de photoémission résolues en angle et en spin sur synchrotron ont permis d’effectuer une analyse précise de la structure électronique selon diverses directions de la zone de Brillouin et d’estimer de manière directe la polarisation de spin au niveau de Fermi du composé SGA. Dans un second temps, une attention particulière a été portée aux multicouches [Co/Pt] et aux JTMs à base de [Co/Pt]. Les multicouches [Co/Pt] constituent la seconde électrode des JTMs à base de SGA. Leurs propriétés magnétiques (en particulier l'anisotropie perpendiculaire et l'aimantation à saturation) ont été soigneusement étudiées en fonction de l'épaisseur de Pt et de la nature de la couche tampon (Pt, MgO ou Al2O3), et en liaison avec leurs caractéristiques structurales. Leur intégration dans des JTMs à base de [Co/Pt] a permis ensuite de remonter d’une part à la polarisation tunnel effective des multicouches [Co/Pt] et d’autre part aux configurations magnétiques des différentes électrodes, configurations parfaitement expliquées et reproduites par des simulations micro-magnétiques. Dans un troisième temps, les résultats de magnéto-transport au sein des JTMs SGA/MgO/[Co/Pt] sont présentés et discutés / The general context of this work is the development and integration of new magnetic materials with original properties of potential interest for spintronic applications. In this field, the Sm1-xGdxAl2 (SGA) compound drives a particular attention, as a zero-magnetization ferromagnet that can exhibit a spin polarization in its magnetic compensated state. In a first step, synchrotron-based angle and spin resolved photoemission spectroscopy experiments have permitted to perform an accurate analysis of the electronic structure along various directions of the Brillouin Zone and to get a direct estimation of the spin polarization at the Fermi level. In a second step, a special attention has been the paid to [Co/Pt] multilayers and to [Co/Pt]-based MTJs. The [Co/Pt] multilayers would constitute the second electrode in SGA-based MTJs. Their magnetic properties (especially the perpendicular anisotropy and the saturation magnetization) have been carefully investigated as a function of Pt thickness and nature of the buffer layer (Pt, MgO or Al2O3), and in close connection with structural characteristics. Their integration in [Co/Pt]-based MTJs has permitted to determine the [Co/Pt] effective tunnel polarization and to unravel the magnetic configurations of both electrodes which are perfectly explained and reproduced by micromagnetic simulations. In a third step, the results concerning the magneto-transport experiments in SGA/MgO/[Co/Pt] MTJs are presented and discussed

Ce travail présente la synthèse, la caractérisation et l’utilisation (transfert électronique photo-induit) de foldamères de taille nanométriques constitués d’unité quinolines. Grâce a une stratégie de synthèse de doublement de segment une grande variété d’oligomères (jusqu’à 96 unités) ont pu être préparé à partir du synthon 8 aminoquinoline-2-carboxylate.Leurs propriétés dynamiques de ces objets ont été étudiées en solution et en phase gazeuse. La spectrométrie de masse de mobilité ionique a permis de déterminer leur conformation en phase gazeuse. Les expériences de RMN DOSY et d’anisotropie de Fluorescence ont permis de déterminer leurs propriétés de diffusion (transrationnelle et rotationnelle). Ces résultats ont révélés qui ces foldamères sont rigides et que leur architecture hélicoïdale est conservée.Le transport électronique photo-induit à travers ces foldamères de taille nanométrique ont été étudié et le mécanisme de transfert ainsi que son efficacité ont été déterminé pour une série de composés de tailles variables. / Herein, synthesis, characterization and application (photoinduced electron transport) of nanosized quinoline-based foldamers have been explored. With double segment strategy, a variety of helical nanosized foldamers (up to 96 quinoline units) were successfully prepared based on 8-aminoquinoline-2-carboxylic acid monomer.The dynamic properties in gas phase and solution were investigated. Ion mobility mass spectrometry afforded access to the conformation state of foldamers ingas phase; DOSY and fluorescence anisotropy assessed the diffusion (translational and rotational, respectively) of foldamers in solution. All of these techniques revealed that quinoline-based foldamers are rigid and that helical conformation is conserved. Photoinduced electron transport through nanosized foldamer was also studied and the mechanism and the transport ratios were revealed.

Ce travail vise à comprendre l’évolution de la texture cristallographique et l’anisotropie du comportement mécanique après laminage à chaud et traitements thermiques d’un Al-Cu-Li 2050 et d’un Al-Zn-Mg-Cu 7050, et expliquer leurs différences. La texture est analysée par EBSD et RX après des essais de compression plane à chaud et après des laminages à chaud industriels. L’anisotropie est étudiée sur des tôles fortes industrielles après différents détensionnements et dans différents états microstructuraux par des essais de traction à 0°, 45° et 90° par rapport à DL. Enfin, nous comparons nos mesures à des résultats simulés par des modèles de plasticité cristalline (modèles de Taylor). Il est montré que, déformés dans des conditions identiques, les deux alliages développent les mêmes textures de laminage jusqu'à une déformation de 2.6. La présence de 1% massique de Li n’est à priori pas responsable d’une texture particulière. En revanche la température de laminage, qui est généralement plus élevée pour les Al-Cu-Li que pour les Al-Zn-Mg-Cu, a un impact important aux grandes déformations, notamment en favorisant la composante Laiton {110}<112>. L'anisotropie d'une tôle laminée de 2050 est pour une large part due à la texture cristallographique. Elle augmente quand un détensionnement est effectué par traction dans la direction DL et diminue quand il est effectué à 45°/DL. La précipitation durcissante, composée de T1 Al2CuLi en forme de plaquettes sur les plans {111}Al, augmente la résistance de la direction préalablement tractionnée mais n'est pas responsable dans nos conditions expérimentales d'une forte aggravation de l'anisotropie. Dans le 7050, l'anisotropie diminue entre l’état mûri naturellement et l’état sur-revenu. La précipitation de sur-revenu du 7050 atténue l'effet de la texture cristallographique sur l'anisotropie et rend, en comparaison, le 2050 d’autant plus anisotrope. / This work aims to understand hot rolling texture evolution and anisotropy of mechanical behaviour on an Al-Cu-Li 2050 and an Al-Zn-Mg-Cu 7050, and aims to explain their differences. Crystallographic textures are analysed by EBSD and X-ray after hot plane strain compressions and after industrial hot rolling. Anisotropy of industrial hot rolled plates is investigated after different stretching and different ageing treatments by means of tensile tests at 0°, 45° and 90° to RD. Experimental results are compared to predictions using plasticity models (Taylor models). It is shown that, under the same processing conditions, the two alloys develop the same rolling textures up to strain of 2.6 ; it can be concluded that the presence of 1wt% of Li does not by itself favour a particular texture. However, it is shown that Brass component {110}<112> is favoured by an increasing rolling temperature, which is generally higher in the Al-Cu-Li than in the Al-Zn-Mg-Cu. Anisotropy of hot rolled 2050 is for a large part caused by crystallographic texture. It increases when stretch axis is at 0° and decreases when stretch axis is at 45°. Hardening precipitation, made by plate shape T1 Al2CuLi lying on the {111}Al, increases yield strength in the stretched direction but it is not responsible in our experimental conditions for a high increase of anisotropy. Anisotropy of 7050 is less important in the over aged state than in the natural aged state. Over ageing precipitation of 7050 reduces the effect of crystallographic texture on the anisotropy and makes 2050 appearing much more anisotropic.

Ce travail porte sur le développement de modèles micromécaniques pour le calcul de la réponse homogénéisée de matériaux architecturés, en particulier des matériaux se présentant sous forme de treillis répétitifs. Les matériaux architecturés et micro-architecturés couvrent un domaine très large de de propriétés mécaniques, selon la connectivité nodale, la disposition géométrique des éléments structuraux, leurs propriétés mécaniques, et l'existence d'une possible hiérarchie structurale. L'objectif principal de la thèse est la prise en compte des nonlinéarités géométriques résultant des évolutions importantes de la géométrie initiale du treillis, causée par une rigidité de flexion des éléments structuraux faible en regard de leur rigidité en extension. La méthode dite d'homogénéisation discrète est développée pour prendre en compte les non linéarités géométriques pour des treillis quais périodiques; des schémas incrémentaux sont construits qui reposent sur la résolution incrémentale et séquentielle des problèmes de localisation - homogénéisation posés sur une cellule de base identifiée, soumise à un chargement contrôlé en déformation. Le milieu continu effectif obtenu est en général un milieu micropolaire anisotrope, dont les propriétés effectives reflètent la disposition des éléments structuraux et leurs propriétés mécaniques. La réponse non affine des treillis conduit à des effets de taille qui sont pris en compte soit par un enrichissement de la cinématique par des variables de microrotation ou par la prise en compte des seconds gradients du déplacement. La construction de milieux effectifs du second gradient est faite dans un formalisme de petites perturbations. Il est montré que ces deux types de milieu effectif sont complémentaires en raison de l'analogie existant lors de la construction théorique des réponses homogénéisées, et par le fait qu'ils fournissent des longueurs internes en extension, flexion et torsion. Des applications à des structures tissées et des membranes biologiques décrites comme des réseaux de filaments quais-périodiques ont été faites. Les réponses homogénéisées obtenues sont validées par des comparaisons avec des simulations par éléments finis réalisées sur un volume élémentaire représentatif de la structure. Les schémas d'homogénéisation ont été implémentés dans un code de calcul dédié, alimenté par un fichier de données d'entrée de la géométrie du treillis et de ses propriétés mécaniques. Les modèles micromécaniques développés laissent envisager du fait de leur caractère prédictif la conception de nouveaux matériaux architecturés permettant d'élargir les frontières de l'espace 'matériaux-propriétés' / The present thesis deals with the development of micromechanical schemes for the computation of the homogenized response of architectured materials, focusing on periodical lattice materials. Architectured and micro-architectured materials cover a wide range of mechanical properties according to the nodal connectivity, geometrical arrangement of the structural elements, their moduli, and a possible structural hierarchy. The principal objective of the thesis is the consideration of geometrical nonlinearities accounting for the large changes of the initial lattice geometry, due to the small bending stiffness of the structural elements, in comparison to their tensile rigidity. The so-called discrete homogenization method is extended to the geometrically nonlinear setting for periodical lattices; incremental schemes are constructed based on a staggered localization-homogenization computation of the lattice response over a repetitive unit cell submitted to a controlled deformation loading. The obtained effective medium is a micropolar anisotropic continuum, the effective properties of which accounting for the geometrical arrangement of the structural elements within the lattice and their mechanical properties. The non affine response of the lattice leads to possible size effects which can be captured by an enrichment of the classical Cauchy continuum either by adding rotational degrees of freedom as for the micropolar effective continuum, or by considering second order gradients of the displacement field. Both strategies are followed in this work, the construction of second order grade continua by discrete homogenization being done in a small perturbations framework. We show that both strategies for the enrichment of the effective continuum are complementary due to the existing analogy in the construction of the micropolar and second order grade continua by homogenization. The combination of both schemes further delivers tension, bending and torsion internal lengths, which reflect the lattice topology and the mechanical properties of its structural elements. Applications to textiles and biological membranes described as quasi periodical networks of filaments are considered. The computed effective response is validated by comparison with FE simulations performed over a representative unit cell of the lattice. The homogenization schemes have been implemented in a dedicated code written in combined symbolic and numerical language, and using as an input the lattice geometry and microstructural mechanical properties. The developed predictive micromechanical schemes offer a design tool to conceive new architectured materials to expand the boundaries of the 'material-property' space

Submitted by Haroudo Xavier Filho (haroudo.xavierfo@ufpe.br) on 2016-04-14T16:39:36Z No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) tese_final_biblioteca.pdf: 10701235 bytes, checksum: 1af9d6bb745e78ea9fe6b261b7baa59c (MD5) / Made available in DSpace on 2016-04-14T16:39:36Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) tese_final_biblioteca.pdf: 10701235 bytes, checksum: 1af9d6bb745e78ea9fe6b261b7baa59c (MD5) Previous issue date: 2015-05-08 / Nesta tese tratamos teoricamente algumas propriedades magnéticas e excita c~oes de spins em materiais ferromagn eticos e antiferromagn eticos com o objetivo de interpretar as medidas e observa c~oes experimentais. Usamos a formula c~ao de ondas de spins de Holstein-Primako para investigar propriedades da din^amica de propaga c~ao de ondas de spins no material ferrimagn etico YIG e tamb em no sistema antiferromagn etico FeF2. Para cada um deles, desenvolvemos modelos te oricos que permitiram ajustar as rela c~oes de dispers~ao de ondas de spins medidas experimentalmente nesses. Al em disso, investigamos a renormaliza c~ao da energia de m agnons usando o formalismo das fun c~oes de Green de dois tempos dependentes da temperatura de Bogoliubov-Tyablikov. A aplica c~ao para o YIG, permitiu calcular as varia c~oes da rela c~ao de dispers~ao para m agnons com a temperatura. Tamb em se investigou a renormaliza c~ao da energia de m agnons no sistema FeF2, mas esta vez considerando uma aproxima c~ao do tipo RPA1. Na renormaliza c~ao da energia foram consideradas duas contribui c~oes: exchange isotr opica tipo Heisenberg e anisotropia uniaxial. Em nossas considera c~oes, foi inclu da a depend^encia com a temperatura da anisotropia uniaxial que permitiu estimar o campo critico de transi c~ao de spin- op para o limite de estabilidade da fase antiferromagn etica. Tamb em, foi feito um estudo te orico e experimental da anisotropia magneto cristalina do material antiferromagn etico RbMnF3, baseado nas intera c~oes de campo cristalino e intera c~ao de spin- orbita, com o objetivo de calcular a varia c~ao com a temperatura do campo de spin- op. As ondas de spins em YIG foram estudadas em mais detalhes calculando as taxas de relaxa c~ao por processos de espalhamento de 3-m agnons e 4-m agnons. Igualmente foram estimadas empregando campos magn eticos intensos da ordem de 102 kOe. Finalmente, estudamos propriedades t ermicas de transporte de m agnons em YIG submetido a campos magn eticos intensos. Calculamos o calor 1Random Phase Approximation especi co de m agnons e a condutividade t ermica em baixas temperaturas e campos magn eticos externos intensos para serem comparados com as medidas experimentais encontrando um bom acordo entre teoria e experimento [145] / In this thesis we theoretically treat some magnetic properties and excitations of spins in ferromagnetic and antiferromagnetic materials in order to interpret measurements and experimental observations. We use the formulation of quantization of spin waves of Holstein-Primako to investigate properties of the spin wave propagation dynamics in the ferrimagnetic material YIG and also in the antiferromagnetic system FeF2. For each of them, we have developed theoretical models to adjust the dispersion relations of spin waves measured experimentally in these systems. In addition, we investigated the magnon energy renormalization using the formalism of two-time temperature dependent Green's functions of Bogoliubov-Tyablikov. The application for the YIG allowed calculate the variation of the dispersion relation for magnons with temperature. We also investigate the magnon energy renormalization in the system FeF2, but this time considering an approximation of the RPA type. In the energy renormalization were considered two contributions: exchange isotropic Heisenberg and uniaxial anisotropy type. In our calculations the temperature dependence of the uniaxial anisotropy eld allows estimating the critical spin- op transition for the antiferromagnetic phase stability limit. Also, we have undertaken a theoretical and experimental study of the magneto crystalline anisotropy of the antiferromagnetic material RbMnF3, based on the crystal eld interactions and spin-orbit interaction, in order to calculate the variation with temperature of the eld spin- op. The spin waves in YIG were studied in more detail calculating the relaxation rate due to 3-magnons and 4-magnons scattering processes considering strong magnetic elds of hundreds of kOe. Finally, we have studied thermal transport properties of magnons in YIG subject to intense magnetic elds. We have, calculate of the speci c heat and thermal conductivity of magnons at low temperatures and high elds to compare with the experimental measurements nding a good agreement between theory and experiment [145].

Cette thèse avait pour objectif d'augmenter la fréquence de travail d'un multicouche magnéto-diélectrique pour des applications des Nouvelles Technologies de l'Information et de la Communication (NTIC). Ainsi, deux types de structures ont été étudiés : des multicouches (CoO=CoFeB)n et des tricouches Py/Ru/Py. Dans les empilements (CoO=CoFeB)n, la montée en fréquence est assurée par une anisotropie de surface du CoFeB induite par une rugosité orientée à la surface de la couche CoO. Cette rugosité est générée par la géométrie de dépôt. La fréquence de résonance de ce système est ajustable sur toute la gamme de fréquence des NTIC par le choix des épaisseurs de CoO et de CoFeB. Ces propriétés magnétiques sont modélisées en ajoutant à l'anisotropie intrinsèque du CoFeB un terme démagnétisant. Celui-ci est calculé à partir des observations de la surface de la couche CoO par microscopie à force atomique. Les propriétés magnétiques obtenues sur le bicouche sont maintenues dans le cas d'un multicouche, montrant que la rugosité est peu affectée par l'empilement. Dans les tricouches Py/Ru/Py, le terme s'ajoutant à l'anisotropie intrinsèque du Py est induit par le couplage des deux couches de Py via les électrons de conduction de la couche de Ru (couplage RKKY). Selon les échantillons, le terme de couplage antiferromagnétique ou quadratique est prépondérant. La modélisation du comportement statique permet de quantifier ces termes de couplage. La modélisation du comportement dynamique prédit les deux fréquences de résonance caractéristiques observées expérimentalement. / The aim of this thesis was to increase the working frequency of a magneto-dielectric multilayer for ICT applications. Two structures were studied : (CoO=CoFeB)n multilayers and Py/Ru/Py trilayer. In (CoO=CoFeB)n stacks, the CoFeB resonance frequency is increased thanks to a surface anisotropy induced by the CoO oriented roughness. This roughness is generated by the deposition geometry. The resonance frequency of this system is adjustable over the entire ICT frequency range by choosing the CoO and CoFeB thicknesses. These magnetic properties are simulated by adding a demagnetizing term to the CoFeB intrinsic volume anisotropy. This term is calculated from AFM observations of CoO surface. The magnetic properties of the bilayer are not degraded in multilayers because the roughness is poorly affected by the stacking. In trilayer Py/Ru/Py, the term added to the Py intrinsic anisotropy is induced by the coupling of the two Py layers via the conduction electrons of Ru (RKKY coupling). Depending on the samples, the quadratic or antiferromagnetic coupling term is dominant. The hysteresis loop fitting leads to the coupling terms values. The dynamic properties calculus predicts the two resonance frequencies experimentally observed.

Additive manufacturing (AM), also known as 3D printing, is a concept and method of a manufacturing process that builds a three-dimensional object layer-by-layer. Opposite to the conventional subtractive manufacturing, it conquers various limitations on component design freedom and raises interest in various fields, including aerospace, automotive and medical applications. This thesis studies the mechanical behavior of thin-walled component manufactured by a common AM technique, laser powder bed fusion (LPBF). The studied material is Hastelloy X, which is a Ni-based superalloy, and it is in connection to a component repair application in gas turbines. The influence of microstructure on the deformation mechanisms at elevated temperatures is systematically investigated. This study aims for a fundamental and universal study that can apply to different material grades with FCC crystallographic structure. It is common to find elongated grain and subgrain structure caused by the directional laser energy input in the LPBF process, which is related to the different printing parameters and brands of equipment. This thesis will start with the study of scan rotation effect on stainless steel 316L in an EOS M290 equipment. The statistic texture analysis by using neutron diffraction reveals a clear transition when different level of scan rotation is applied. Scan rotation of 67° is a standard printing parameter with intention to lower anisotropy, yet, the elongated grain and cell structure is still found in the as-built microstructure. Therefore, the anisotropic mechanical behavior study is carried out on the sample printed with scan rotation of 67° in this thesis. Thin-walled effects in LPBF are investigated by studying a group of plate-like HX specimens, with different nominal thicknesses from 4mm down to 1mm, and a reference group of rod-like sample with a diameter of 18mm. A texture similar to Goss texture is found in rod-like sample, and it becomes &lt;011&gt;//BD fiber texture in the 4mm specimen, then it turns to be &lt;001&gt; fiber texture along the transverse direction (TD) in the 1mm specimen. Tensile tests with the strain rate of 10−3 s−1 have been applied to the plate-like specimens from room temperature up to 700 ℃. A degradation of strength is shown when the sample becomes thinner, which is assumed to be due to the overestimated load bearing cross-section since the as-built surface is rough. A cross-section calibration method is proposed by reducing the surface roughness, and a selection of proper roughness parameters is demonstrated with the consideration of the calculated Taylor’s factor and the residual stress. The large thermal gradient during the LPBF process induces high dislocation density and strengthens the material, hence, the LPBF HX exhibits better yield strength than conventionally manufactured, wrought HX, but the work hardening capacity and ductility are sacrificed at the same time. Two types of loading condition reveal the anisotropic mechanical behavior, where the vertical and horizontal tests refer to the loading direction being on the BD and TD respectively. The vertical tests exhibit lower strength but better ductility that is related to the larger lattice rotation observed from the samples with different deformation level. Meanwhile, the elongated grain structure and grain boundary embrittlement are responsible for the low horizontal ductility. A ductile to brittle transition is traced at 700 ℃, so a further study with two different slow strain rates, 10−5 s−1 and 10−6 s−1, are carried out at 700 ℃. Creep damage is shown in the slow strain rates testing. Deformation twinning is found only in the vertical tests where it forms mostly in the twin favorable &lt;111&gt; oriented grain along the LD. The large lattice rotation and the deformation twinning make the vertical ductility remain high level under the slow strain rates. The slow strain rate tensile testing lightens the understanding of creep behavior in LPBF Ni-based superalloys. In summary, this thesis uncovers the tensile behavior of LPBF HX with different variations, including geometry-dependence, temperature-dependence, crystallographic texture-dependence and strain rate-dependence. The generated knowledge will be beneficial to the future study of different mechanical behavior such as fatigue and creep, and it will also enable a more robust design for LPBF applications. / Additiv tillverkning, eller 3D-utskrifter, är tillverkningsmetoder där man skapar ett tredimensionellt objekt genom att tillföra material lager for lager. Till skillnad från konventionella avverkande tillverkningsmetoder elimineras många geometriska begränsningar vilket ger större designfrihet och metoderna har därför väckt stort intresse inom en rad olika områden, inklusive flyg-, fordons- och medicinska tillämpningar. I denna avhandling studeras mekaniska egenskaper hos tunnväggiga komponenter tillverkade med en vanligt förekommande laserbaserad pulverbädds-teknik, laser powder bed fusion (LPBF). Det studerade materialet är Hastelloy X, en Ni-baserad superlegering som är vanligt förekommande for både nytillverkning och reparation av komponenter för gasturbiner. Inverkan av mikrostruktur på deformationsmekanismerna vid förhöjda temperaturer undersöks systematiskt. Detta arbete syftar till att ge grundläggande och generisk kunskap som kan tillämpas på olika materialtyper med en kubiskt tätpackad (FCC) kristallstruktur. Det är vanligt att man hittar en utdragen kornstruktur orsakad av den riktade tillförseln av laserenergi i LPBF-processen, vilket kan relateras till olika processparametrar och kan variera mellan utrustningar frän olika leverantörer. Denna avhandling inleds med studien av effekten av scanningsstrategi vid tillverkning av rostfritt stål 316L i en EOS M290-utrustning. En statistisk texturanalys med hjälp av neutrondiffraktion påvisar en tydlig övergång mellan olika mikrostrukturer när olika scanningsstrategier tillämpas. En scanningsrotation på 67 mellan varje lager är en typisk standardinställning med avsikt att sanka anisotropin i materialet, dock finns den utdragna kornstrukturen oftast kvar. I denna avhandling studeras därför de anisotropa egenskaperna hos material tillverkade med 67 scanningsrotation. Effekten av tunnväggiga strukturer i LPBF undersöks genom att studera en uppsättning platta HX-prover, med olika nominella tjocklekar från 4 mm ner till 1 mm, samt en referensgrupp med cylindriska prov med en diameter på 18 mm. Kristallografisk textur som liknar den av Goss-typ återfinns i de cylindriska proverna vilket gradvis övergår från en fibertextur med &lt;011&gt; i byggriktningen for 4mm-proven till en fibertextur med &lt;001&gt; i tvärriktningen for 1mm-proven. Dragprovning med en töjningshastighet på 10−3 s−1 har utförts på de platta provstavarna från rumstemperatur upp till 700 ℃. En sänkning av styrkan uppvisas när proven blir tunnare, vilket kan antas bero på att det lastbarande tvärsnittet överskattas på grund av den grova ytan. En metod för tvärsnittskalibrering föreslås genom att kompensera for ytråheten, och valet av lämplig ytfinhetsparameter motiveras med hänsyn till den beräknade Taylor-faktorn och förekomsten av restspänningar. Den stora termiska gradienten som uppstår for LPBF-processen inducerar en hög dislokationstäthet vilket höjer materialets styrka och följaktligen uppvisar LPBF HX högre sträckgräns an konventionellt tillverkad, smidda HX, men förmågan till deformationshårdnande samt duktiliteten i materialet sänks samtidigt. Tester utförda i två olika belastningsriktningar, vertikalt respektive horisontellt mot byggriktningen, demonstrerar det anisotropiska mekaniska beteendet. De vertikala testerna uppvisar lägre hållfasthet men bättre duktilitet vilket kan relateras till en större benägenhet for kristallstukturen att rotera när deformationsgraden ökar. Samtidigt är den utdragna kronstukturen ansvarig for den lägre duktiliteten for de horisontella proverna. En övergång från ett duktilt till ett mer sprött beteende noterades vid 700 ℃, och därför initierades ytterligare en studie där tester med två lägre töjningshastigheter, 10−5 s−1 och 10−6 s−1, utfördes vid 700 ℃. Det kan noteras att krypskador återfinns i tester med en långsam deformationshastighet och deformationstvillingar uppstår endast i de vertikala provstavarna där det främst bildas tvillingar i korn orienterade med &lt;111&gt; riktningen längs belastningsriktningen. Den stora förmågan till rotation i kristallstrukturen och deformationstvillingarna bidrar till att den vertikala duktiliteten förblir hög även i testerna med en låg deformationshastighet. Testerna med en långsam draghastighet bidrar därför till en bättre förståelse av krypbeteendet i LPBF Nibaserade superlegeringar. Sammanfattningsvis så bidrar denna avhandling till bättre förståelse av de mekaniska egenskaperna hos LPBF HX i olika utföranden och förhållanden, inklusive geometriberoende, temperaturberoende, deformationshastighetsberoende samt inverkan av kristallografisk textur. Den genererade kunskapen kommer att vara till stor nytta vid fortsatta studier av olika mekaniska egenskaper som utmattning och kryp, samt bidrar till att möjliggöra en mer robust design for LPBF-tillämpningar.