Tesis por compendio / El presente proyecto de investigación está enfocado al desarrollo de sensores químicos fluoro-cromogénicos, para la detección y determinación de especies químicas de interés biológico, industrial y medioambiental de forma selectiva y con alta sensibilidad. En forma general, se busca el diseñar nuevos sistemas sensores basados en compuestos (receptores) formados por dos unidades: una unidad coordinante que interacciona con el anión a determinar y una unidad generadora de señal que alerta del reconocimiento molecular efectuado. Durante este estudio se están preparando diversas moléculas receptoras funcionalizandas con grupos modificadores de estructura para evaluar su influencia sobre las capacidades de detección y selectividad como receptores de especies específicas en diferentes condiciones y medios. Las diferentes aproximaciones en prueba implican a su vez el diseño y síntesis molecular, así como el análisis de las diferentes señales ópticas producidas en el reconocimiento, con el fin de diseñar sistemas de alta eficacia y eficiencia, y con posibilidades reales de aplicación. / Santos Figueroa, LE. (2014). New approaches for the development of chromo-fluorogenic sensors for chemical species of biological, industrial and environmental interest [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/43216 / TESIS / Premios Extraordinarios de tesis doctorales / Compendio

This thesis presents computational studies of problems in the organic and polymer chemistry. The state-of-the art quantum chemical methods are used to gain further insight into the origin and the nature of the reactions in three different organic and polymer systems. The research questions are conceptually approached by identifying the key aspects. Then an appropriate strategy for the quantum chemical modeling is developed. In the scope of the polymer chemistry, the novel synthesis technique of nanostructured materials, the so-called twin polymerization, is investigated. Using three model systems of increasing complexity the influence of the anion (trifluoroacetate) in the reaction system is investigated. The effect of the solvent polarity as well as the effect of the entropic contributions are also considered. The rearrangement reaction of the volatile cyanotritylcarbenes is another topic. These carbenes readily rearrange to ethene main products, however also small amount of the unexpected heptafulvenes is formed. This unprecedented heptafulvene formation is modeled in detail and the energetics is systematically evaluated to identify most reasonable rearrangement pathways of the probable multiple alternative routes. Computational investigation of other tritylcarbenes with varying spectator substituents results in sophisticated data base for experimental investigations. At last, some controversial observations in experimental studies concerning the kinetics of the electrophilic alkylation of the barbiturate anion are studied. To interpret the kinetic measurements, different alkylation pathways are analyzed with respect to their energetics. Further, the influence of microsolvation is demonstrated.

Die Verbindung von hoch entwickelten Nanomaterialien mit fluoreszenzbasierten Technologien hat sich zu einem aufstrebenden Forschungsbereich entwickelt. Nichtsdestotrotz ist bis heute der Schritt von einem organischen Indikatormolekül zum anwendbaren Sensorsystem ein komplexer Prozess. Diese Arbeit zielte darauf ab, sensorische Materialien verschiedener chemischer Natur für diverse Analyten zu entwickeln, zu charakterisieren und zu etablieren. Hierbei wurden zunächst pH sensitive Fluoreszenzfarbstoffe entwickelt und in dünnen Membranen immobilisiert. Der Teststreifen ermöglicht die Beurteilung von pH-Änderungen mit dem Auge. Darüber hinaus wurde gezeigt, wie diese Farbstoffe auch in eine wasserlösliche Form überführt werden können. Damit konnten lokale pH-Änderungen an der Wachstumsfront von Silikat-Biomorphs detektiert werden. Auch partikuläre Systeme stellten sich als geeignete Materialien heraus. Es konnte gezeigt werden, wie die Silikat-Matrix von Partikeln zu verbesserten Eigenschaften für Farbstoffe führt. Mittels farbstoffbeladener Partikel konnte in einem Lateral-Flow-Assay ein schneller Nachweis von TATP etabliert werden. Ein anderer Ansatz verfolgte das Ziel des sensitiven Nachweises von Quecksilberionen in Wasser. In einem anderen System konnten Silikat-Nanopartikeln so funktionalisiert werden, dass ein sensitiver und selektiver Nachweis von Schwermetallionen und Anionen über ein Quencher-Displacement-Assay gelang. Zusätzlich wurde die einzigartige Oberfläche von Zellulosepartikeln mithilfe eines neu entwickelten Fluoreszenzfarbstoffs untersucht. Die untersuchten Materialien und Strategien zeigen, wie leicht innovative Moleküle für potentielle sensorische Systeme im wässrigen Medium auf Basis von fluoreszierenden Partikeln und dünnen Schichten geschaffen werden können. Das Verhalten der hergestellten Materialien wurde über spektroskopische Methoden evaluiert und dabei, wenn möglich, die Parameter Sensitivität, Selektivität und Ansprechzeit beurteilt. / The combination of fluorescence and nanomaterials has developed into an emerging research area. Nonetheless until now the step from an organic sensory molecule to a final sensor format is a complex endeavor. This thesis aimed at the preparation of particulate and thin-film based platforms for various analytes through combining the features of an appropriate host material with outstanding properties of dyes concomitant with sensitive fluorescence detection techniques. In particular, pH sensitive fluorescent probes were sterically immobilized into a thin membrane. The dip-stick allows the assessment upon change in pH with the eye. Especially a probe working at high basic pH range was converted into a water-soluble analogue and was directly applied at the growth front of silica biomorphs to detect local pH changes. But also particulate structures are suitable host materials. It is shown how the silica matrix of nanoparticles lead to improved optical properties for embedded dyes. The interactions of silica and fluorescent dyes within the pores of mesoporous particles were exploited to develop an actual sensor format based detection of TATP. In another approach it was possible to detect mercury ions in water. Heavy metal ions were also successfully detected in a quencher displacement assay involving receptor-dye functionalized silica nanoparticles. The impact of the unique surface properties of cellulose microparticles was shown by a fluorescent dye which allows an assessment of the surface functional groups and microenvironment through the reactivity and its changes in the optical properties. The performance of the prepared materials were evaluated mostly by spectroscopic methods and if possible assessed in terms of sensitivity, selectivity and response time. The newly developed and investigated materials based on fluorescent particulate and thin-films show the facile application of innovative sensor probes for potentially sensing devices.

[EN] Abstract The present PhD thesis entitled "Supramolecular Chemistry: New chemodosimeters and hybrid materials for the chromo-fluorogenic detection of anions and neutral molecules" is based on the application of supramolecular chemistry and material science principles for the development of optical chemosensors for anions and neutral molecules detection. The second chapter of this PhD thesis is devoted to the preparation of chemodosimeters for the chromo-fluorogenic detection of fluoride, diisopropyl fluorophosphates (DFP) and hydrogen sulfide. The optical detection of fluoride anion was achieved by using a pyridine derivative containing a t-butyldimethylsilyl ether group. Aqueous solutions of the chemodosimeter were colorless but turned yellow upon addition of fluoride anion. Also a remarkable enhancement in emission was observed only upon the addition of fluoride. The optical changes were ascribed to a fluoride-induced hydrolysis of the silyl ether moiety. Also a chemodosimeter for the optical recognition of DFP, a nerve agent simulant, was prepared. In this case, the chemodosimeter was based on a stilbene pyridinium derivative functionalized with hydroxyl and silyl ether moieties. Aqueous solutions of the chemodosimeter were colorless changing to yellow upon DFP addition. The optical changes were ascribed to a hydroxyl phosphorylation followed by a fluoride-induced hydrolysis of the silyl ether group. Besides, that probe was implemented in test strips and DFP detection in gas phase was accomplished. Finally, the fluorogenic recognition of hydrogen sulfide anion was explored. For this purpose different fluorophores were selected and fucntionalized with 2,4-dinitrophenyl ether groups. The prepared probes were neraly non-emissive but remarkable emission enhancements upon addition of hydrogen sulfide were observed. The emission enhancements observed were due to a selective sulfide-induced hydrolysis of the 2,4-dinitrophenyl ether moiety that yielded the free fluorophores. Another set of chemodosimeters equipped with azide and sulfonylazide moieties were prepared. Again these probes were non-fluorescent but upon addition of hydrogen sulfide an important enhancement in emission was found. The selective response was ascribed to a reduction of the azide and sulfonylazide moieties to amine and sulfonylamide induced by hydrogen sulfide anion. Besides, the viability assays showed that these dosimeters were essentially non-toxic and real-time fluorescence imaging measurements confirmed their ability to detect intracellular hydrogen sulfide at micromolar concentrations. The third chapter of this PhD thesis was devoted to the preparation of nanoscopic gated materials and their use in sensing protocols. In a first step a gated material for the optical detection of glutathione (GSH) was prepared. For this purpose MCM-41 mesoporous silca nanoparticles were selected as inorganic scaffold. The pores were loaded with safranine O and the external surface was functionalized with disulfide-containing oligo(ethylene glycol) moieties. Dye delivery from aqueous suspensions of the sensory material was only observed in the presence of GSH. The signalling paradigm was ascribed to the selective reduction of the disulfide bond by GSH which induced pore opening and dye release. Also capped organic-inorganic hybrid materials for the selective detection of hydrogen sulfide were prepared and characterized. In this case the same MCM-41 support was used and charged with [Ru(bipy)3]2+ dye. Then, the external surface was functionalized with Cu(II)-macorcyclic complexes and finally, the pores were capped by the addition of the bulky anion hexametaphosphate. Aqueous suspensions of this material showed negligible dye release whereas in the presence of hydrogen sulfide anion a remarkable colour change was observed. This optical response was ascribed to a demetallation process of the Cu(II) complex induced by hydrogen sulfide. / [ES] Resumen La presente tesis doctoral titulada "Química supramolecular: Nuevos dosímetros químicos y materiales híbridos para la detección cromo-fluorogénica de aniones y moléculas neutras." está basada en la aplicación de principios básicos de la química supramolecular y de la ciencia de materiales en el desarrollo de sensores ópticos para aniones y moléculas neutras. El segundo capítulo de esta tesis doctoral está dedicado a la preparación de dosímetros químicos para la detección cromo-fluorogénica de fluoruro, diisopropil fluorofosfato (DFP) y sulfuro de hidrógeno. Para la detección óptica del anión fluoruro se sintetizó un derivado de piridina funcionalizado con un t-butildimetilsilil éter. En este capítulo también se describe la preparación de un dosímetro químico para la detección de DFP, que es un simulante de agentes nerviosos. Este dosímetro está basado en un estilbeno funcionalizado con una sal de piridinio que contiene grupos hidroxilo y silil éter en su estructura. Finalmente se prepararon dos familias de sensores para la detección óptica de hidrógeno sulfuro. La primera familia de sensores consiste en fluoróforos comunes funcionalizados con 2,4-dinitrofenil éteres. Los sensores preparados no presentaron una emisión de fluorescencia importante mientras que, en presencia del anión hidrógeno sulfuro, se observó un aumento significativo. La segunda familia de dosímetros también estaba compuesta por ciertos fluorofóros pero, en este caso, funcionalizados con grupos azida y sulfonilazida. Los dosimétros preparados, siguiendo esta segunda aproximación, tampoco dieron una fluorescencia significativa observándose un aumento de la misma al añadir el anión hidrógeno sulfuro. El tercer capítulo de esta tesis doctoral está dedicado a la preparación de materiales híbridos nanoscópicos funcionalizados con puertas moleculares y su aplicación en protocolos de reconocimiento. En primer lugar se preparó un material para la detección óptica de glutatión (GSH). Para ello se emplearon nanopartículas de MCM-41 mesoporosas como soporte inorgánico. Los poros del soporte fueron cargados con el colorante safranina O y la superficie externa funcionalizada con oligo(etilenglicol) conteniendo enlaces disulfuro. También se prepararon y caracterizaron varios materiales híbridos para la detección selectiva del anión hidrógeno sulfuro. En este caso también se empleó, como soporte inorgánico, sílice mesoporosa MCM-41. Los poros del soporte inorgánico fueron cargados con [Ru(bipy)3]2+ y la superficie externa funcionalizada con varios complejos macrocíclicos de Cu(II). El material sensor final fue obtenido al añadir el anion hexametafosfato, que compleja con los complejos de Cu(II), produciendo un bloqueo de los poros. / [CAT] Resum La present tesi doctoral titulada "Química supramolecular: Nous dosímetres químics i materials híbrids per a la detecció cromo-fluorogènica d'anions i molècules neutres." està basada en l'aplicació dels principis bàsics de la química supramolecular i de la ciència dels materials en el desenvolupament de sensors òptics per a anions i molècules neutres. El segon capítol d'aquesta tesi doctoral està dedicat a la preparació de dosímetres químics per a la detecció cromo-fluorogènica de fluorur, diisopropil fluorofosfat (DFP) i sulfur d'hidrogen. Per a la detecció òptica de l'anió fluorur es va sintetitzar un derivat de piridina funcionalitzat amb un t-dibutildimetilsilil èter. En aquest capítol també es descriu la preparació d'un dosímetre químic per a la detecció de DFP, que és un simulant d'agents nerviosos. Aquest dosímetre està basat en un estilbè funcionalitzat amb una sal de piridina que conté grups hidroxil i silis èter en la seua estructura. Finalment varen ser preparades dues famílies de sensors per a la detecció òptica de sulfur d'hidrogen. La primera família consisteix en fluoròfors comuns funcionalitzats amb 2,4-dinitrofenil èters. Els sensors preparats no presentaren una emissió de fluorescència significativa mentre que, en presencia de l'anió hidrogen sulfur, es va observar un augment significatiu. La segona família de dosímetres també estava composada per certs fluròfors però, en aquest cas, funcionalitzats amb grups azida i sulfonilazida. Els dosímetres preparats, seguint aquesta segona aproximació, tampoc donaren una fluorescència significativa observant-se un augment de la mateixa al afegir l'anió hidrogen sulfur. El tercer capítol d'aquesta tesi doctoral està dedicat a la preparació de materials híbrids nanoscòpics funcionalitzats amb portes moleculars i la seua aplicació en protocols de reconeixement. En primer lloc es va preparar un material per a la detecció òptica de glutatió (GSH). Per a aquest propòsit es varen emprar nanopartícules MCM-41 mesoporoses com a suport inorgànic. Els porus del suport varen ser carregats amb el colorant safranina O i la superfície externa funcionalitzada amb oligo(etilenglicol) que contenia enllaços disulfurs. També varen ser preparats i caracteritzats diversos materials híbrids per a la detecció selectiva de l'anió hidrogen sulfur. En aquest cas també es va emprar, com a suport inorgànic, sílice mesoporosa MCM-41. Els porus del suport inorgànic varen ser carregats amb [Ru(bipy)3]2+ i la superfície externa funcionalitzada amb diversos complexos macrocíclics de Cu(II). El material sensor final es va obtindre al afegir l'anió hexametafosfat, que es complexa amb macrocicles de Cu(II), produint un bloqueig dels porus. / El Sayed Shehata Nasr, S. (2015). Supramolecular Chemistry: New chemodosimeters and hybrid materials for the chromo-fluorogenic detection of anions and neutral molecules [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/52598 / TESIS

Kleine Moleküle wie Treibhausgase, aber auch Distickstoff und Disauerstoff stehen im Fokus der chemischen Forschung. Solche Moleküle sind durch ihr Vorkommen in der Atmosphäre ubiquitär vorhanden, preiswert und könnten als Synthesebausteine für die Darstellung von komplexeren Molekülen verwendet werden. In dieser Arbeit wurde die Reaktion koordinativ ungesättigter Diketiminato-Nickelkomplexe ([LNi] Komplexe) mit kleinen Molekülen untersucht. Zunächst wurden die Mechanismen der N2-Aktivierung durch reduzierte [LtBuNiI]- und [LMe6NiI] Komplexe miteinander verglichen. Dabei konnte das distickstoffaktivierende Schlüsselintermediat identifiziert und strukturell charakterisiert werden. Weiter wurden die N2-Komplexe [(LtBuNiI)( 1 1 N2)] bzw. K2[(LtBuNiI)( 1 1 N2)], die Vorläufer für [LNiI]- und [LNi0]– Komplexfragmente darstellen, hinsichtlich ihrer Potentials zur Aktivierung der reaktionsträgen Treibhausgase SF6 und NF3 untersucht. Über Reaktionen von Übergangsmetallkomplexen mit NF3 war bis dahin noch nicht berichtet worden; zur Umsetzung von SF6 existierten wenige Publikationen, in denen aber sehr viele mechanistische Fragen offengeblieben sind. Die Mechanismen der SF6- und NF3-Aktivierung wurden durch Kombination einer Vielzahl von ex- und in situ Analysen beleuchtet. Im Falle der SF6 Aktivierung gelang es zudem, ein Nickel(I)-Intermediat zu isolieren. Ein Produkt beider Systeme war der Fluorido-Nickel(II)-Komplex [LtBuNiIIF], dessen Reaktionsverhalten ebenfalls studiert wurde. Doch nicht nur Komplexe mit Nickelatomen in niedrigen Oxidationsstufen erwiesen sich für die Aktivierung kleiner Moleküle geeignet, sondern auch kationische [LtBuNiII(D)]+-Komplexe. Diese Nickel(II)-Komplexe reagierten mit fluorierten Molekülen, N2O sowie O2, was bemerkenswert ist, da Nickel(II)-Komplexe üblicherweise inert gegenüber O2 sind. Im Zuge der O2-Studien wurde ein metastabiler Oranoperoxidkomplex isoliert und strukturell charakterisiert, was beispiellos in der Literatur ist. / Current research focuses on the activation of small molecules like greenhouse gases, thermodynamically stable molecules like N2 and kinetically stabilized molecules like O2, which are all abundant in the atmosphere. Thus, it appears to be alluring to use them as cheap and readily available building blocks for the synthesis of value-added compounds. This dissertation deals with the reaction of low-coordinate diketiminate nickel complexes [LNi] and such small molecules. Initially, the mechanisms of the dinitrogen activation by reduced [LtBuNiI] and [LMe6NiI] complexes were studied. As a result, the key intermediate [(LtBuNiI)x(3 Br)xKx] (x > 1) was identified and structurally characterized. Subsequently, the nickel complexes [(LtBuNiI)( 1 1 N2)] and K2[(LtBuNiI)( 1 1 N2)], which represent sources for [LtBuNiI] and [LtBuNi0]– moieties, were applied to the activation of the inert, but very efficient greenhouse gases SF6 and NF3. Prior to these investigations, no transition metal complex had been reported to react with NF3. Publications dealing with the conversion of SF6 had been scarce, too, while at same time, the mechanisms involving its activation had been speculative. The mechanisms of the NF3 and SF6 activation reactions were deduced combining numerous ex-situ and in situ analytical methods. In case of the SF6 activation, even an intermediate could be isolated. In both systems, the nickel fluoride complex [LtBuNiIIF] was formed and its reaction behaviour was also studied. Furthermore, not only [LtBuNiI]- and [LtBuNi0]– moieties proved to be reactive towards small molecules, but also cationic [LtBuNiII(D)]+ complexes, which were specifically developed for this purpose. The reactions of [LtBuNiII(D)]+ complexes with fluorinated molecules (e. g. PhF, NF3), O2 and N2O were studied. In course of the O2 activation, a metastable organoperoxide complex was isolated and structurally characterized, which is unparalleled in the literature.

The atomic metal anions Rb-, Cs-, Cu-, Ag- and Fe- have been generated in the gas phase and reacted with various neutral reactants in a triple quadrupole mass spectrometer. The metal anions were formed via electrospray ionization of the metal-oxalate solutions and form in gas phase between the capillary and the first quadrupole. Neutral gas phase reactants investigated include NO, NO2, SO2, C6F5OH, C6F5NH2, C6F6, E-octafluoro-butene and 1,2,3/1,2,4/1,3,5 trifluoro-benzene. When possible, CBS-4M methods were used to suggest the lowest energy products based on relative energy. Observed reactions of atomic metal anions with the aforementioned neutral species include electron transfer and dissociative electron transfer to the neutral gas phase reactants. In addition, hydrogen abstraction and fluorine abstraction forming a neutral metal hydride or fluoride as well as the formation of multiply substituted metal-oxide/fluoride anions was also observed. Metal-complex anions observed from the gas phase reactions include CuF-,CuF2-,CuO-,CuO2-, FeO-, FeO2-, FeO3-, FeF-, FeF2-, FeF3-, CsF- and CsF2-.

The atomic metal anions Rb-, Cs-, Cu-, Ag- and Fe- have been generated in the gas phase and reacted with various neutral reactants in a triple quadrupole mass spectrometer. The metal anions were formed via electrospray ionization of the metal-oxalate solutions and form in gas phase between the capillary and the first quadrupole. Neutral gas phase reactants investigated include NO, NO2, SO2, C6F5OH, C6F5NH2, C6F6, E-octafluoro-butene and 1,2,3/1,2,4/1,3,5 trifluoro-benzene. When possible, CBS-4M methods were used to suggest the lowest energy products based on relative energy. Observed reactions of atomic metal anions with the aforementioned neutral species include electron transfer and dissociative electron transfer to the neutral gas phase reactants. In addition, hydrogen abstraction and fluorine abstraction forming a neutral metal hydride or fluoride as well as the formation of multiply substituted metal-oxide/fluoride anions was also observed. Metal-complex anions observed from the gas phase reactions include CuF-,CuF2-,CuO-,CuO2-, FeO-, FeO2-, FeO3-, FeF-, FeF2-, FeF3-, CsF- and CsF2-.