Celulose nanocristalina (CNC) é um material de grande ascensão e desenvolvimento no mercado, com um número cada vez maior de aplicações em diversos setores industriais. Contudo, suas aplicações dependem fortemente das propriedades químicas, físicas e ópticas inerentes da CNC, bem como a capacidade de subsequente modificação química. A produção de CNC por via enzimática é um processo controlado e ambientalmente correto que permite obter as CNCs com propriedades desejáveis, porém o processo ainda é pouco estudado. Neste contexto, o objetivo deste trabalho foi aumentar a seletividade da endoglucanase para as regiões amorfas e produzir CNC com alta cristalinidade e alto grau de pureza (baixo teor de hemicelulose). Para isso, foi investigado, pela primeira vez, os efeitos de um preparo enzimático rico em xilanase (Cellic HTec2 ®) para auxiliar na produção de CNC por hidrólise enzimática a partir de polpa kraft de eucalipto branqueada (BEKP). Surpreendentemente, combinações de enzimas com cargas mais elevadas de xilanase em relação a de endoglucanase, mostrou ter um maior potencial para produção de CNC, uma vez que esta foi a única condição que levou ao isolamento de nanopartículas. Essas nanopartículas apresentaram tamanho médio de 420-720nm, índice de cristalinidade entre 65-70%, suas suspensões aquosas permaneceram estáveis por um período maior do que 48h, e apresentaram termoestabilidade muito superior a CNCs obtidas pelo método tradicional de hidrólise com H2SO4. A combinação com carga de xilanase 3 e 7 vezes maior do que a de endoglucanase mostrou ser uma combinação ideal para produção de CNCs. Apesar da xilanase utilizada neste trabalho ter solubilizado mais 70% da xilana de BEKP, o teor de xilana encontrado nas CNCs mantiveram alto (13-15%) e não houve correlação com a composição química o resíduo de BEKP após a hidrólise enzimática. / Cellulose nanocrystal (CNC) is a high-value, emerging nanomaterial with an increasing number of applications in various industrial sectors. However, its applications depend heavily on the inherent chemical, physical and optical properties as well as its suitability for subsequent chemical modification. The enzymatic production of CNC is a controlled and ecofriendly process that allows to obtain CNC with improved properties, but the process is still poorly studied. In this context, the objective of this work was to increase the selectivity of an endoglucanase to the amorphous regions of cellulose and to produce CNC with high crystallinity and purity (low hemicellulose content). We investigated, for the first time, the ability of an endoxylanase enriched enzyme preparation (Cellic HTec2 ®) to aid in the production of CNC by enzymatic hydrolysis from a bleached eucalyptus kraft pulp (BEKP). Interestingly, it was found that combinations of enzymes with xylanase load higher than endoglucanase resulted in greater potential for CNC production, since this was the only condition that led to the isolation of nanoparticles. These nanoparticles showed an average particle size of 420- 720nm, crystallinity index between 65-70%, and their aqueous suspension could remain stable for a period longer than 48h. The enzymatically produced CNCs showed much higher thermostability than the CNC obtained by the traditional hydrolysis with H2SO4. The combination of xylanase loading 3 and 7 times greater than endoglucanase was shown to be an ideal combination for CNC production. Although the xylanase employed in this work solubilized more than 70% of the xylan in BEKP, the content of xylan found in CNC produced remained high (13-15%) and did not correlated with the chemical composition of the enzymatic hydrolysis cellulosic residue.

This work investigates the compositional and nanostructural variability of celluloses isolated from plants and the impact of the variability in the production of cellulose nanocrystals. A variable set of cellulose isolated from plants were generated starting with a range of feedstocks (coconut fiber, sisal fiber, eucalyptus sawdust, pine sawdust, sugarcane rind and sugarcane pith), applying a range of cellulose isolation processes (acetossolv, liquid hot water, alkaline, and liquid hot water + alkaline) and adding commercial cellulose (eucalyptus kraft pulp, dissolving pulp, and microcrystalline cellulose) as reference materials. The nanostructural characteristics were evaluated by calorimetric thermoporometry, X-ray diffraction, and moisture sorption isotherms. Composition was evaluated by standard wet chemical analysis and insights on functional groups were obtained by infrared spectroscopy. The cellulose nanocrystals were produced by acid hydrolysis with sulfuric acid and characterized by atomic force microscopy and X-ray diffraction. The measured parameters of the isolated celluloses were spread, showing we could achieve a highly diverse set of substrates. Significant correlations between measured variables across the sample set, indicating possible unforeseen multivariate relations among cellulose features. For example, we could show that cellulose monolayer hydration is determined by both hemicelluloses content (compositional parameter) as well as cellulose crystal width (structural parameter). Cellulose nanocrystals were successfully produced, although in some cases such as for the acetossolv pulps the acid conditions were too aggressive and oxidized the substrates. Finally, some quantitative correlations were seen between the parameters of cellulose substrates and the resulting cellulose nanocrystals. These results supply the first hints about how the nanostructural variability of isolated cellulose can influence the cellulose nanocrystals produced from them. / Este trabalho investiga a variabilidade composicional e nanoestrutural de celuloses isoladas de plantas e o seu impacto na variabilidade na produção de nanocristais de celulose. Um conjunto variável de celuloses isoladas de plantas foi gerado a partir de uma série de matérias-primas (fibra de coco, sisal, serragem de eucalipto, serragem de pinheiro, casca de cana e miolo de cana), aplicando uma série de processos de isolamento de celulose (hidrotérmico, alcalino, hidrotérmico + alcalino e acetosolve) e adicionando celuloses comerciais (polpa kraft de eucalipto, polpa para dissolução e celulose microcristalina) como materiais de referência. As características nanoestruturais foram avaliadas por termoporometria calorimétrica, difração de raios X e isotermas de sorção de umidade. A composição foi avaliada por análise química húmida padrão e os conhecimentos sobre grupos funcionais foram obtidos por espectroscopia de infravermelhos. Os nanocristais de celulose foram produzidos por hidrólise ácida com ácido sulfúrico e caracterizados por microscopia de força atômica e difração de raios-X. Os parâmetros medidos das celuloses isoladas foram distribuídos, demonstrando que poderíamos alcançar um conjunto altamente diversificado de substratos. Correlações significativas entre as variáveis medidas foram observadas em todo o conjunto amostral, indicando possíveis relações multivariadas imprevistas entre as características da celulose. Por exemplo, poderíamos demonstrar que a monocamada de hidratação de celulose é determinada tanto pelo conteúdo de hemiceluloses (parâmetro de composição) quanto pela largura do cristal de celulose (parâmetro estrutural). Os nanocristais de celulose foram produzidos com sucesso, embora em alguns casos, como nas polpas acetosolve, as condições ácidas fossem muito agressivas e oxidassem os substratos. Finalmente, algumas correlações quantitativas foram observadas entre os parâmetros dos substratos de celulose e os nanocristais de celulose resultantes. Estes resultados fornecem as primeiras dicas sobre como a variabilidade nanoestrutural da celulose isolada pode influenciar os nanocristais de celulose produzidos a partir deles.

L’originalité de ce travail est d’étudier la contribution des nanocelluloses pour lafonctionnalisation des papiers spéciaux. Il y a deux types de nanocellulose, les nanocristauxde cellulose (NCCs) et les microfibrilles de cellulose (MFCs). Il en résulte des propriétésdifférentes à l’état de suspension et à l’état sec. La propriété des MFCs de former un réseaud’enchevêtrement est utilisée pour la dispersion des particules. L’auto-assemblage des NCCsa permis d’élaborer des films iridescents. Ces films ont été considérés comme couchesmodèles puis ensuite mis en oeuvre dans le procédé de fabrication des papiers. Il a été proposéavec succès d’utiliser les MFCs dans le couchage pour réduire la quantité de pigmentsopacifiants pour les papiers minces, et de fabriquer des pigments iridescents pour obtenir despropriétés d’anti-contrefaçon. Ces approches ont été validées à l’échelle laboratoire mais aussipilote. / The original feature of this work is to investigate the contribution of two families ofnanocellulose for their application within specialty papers. It exists two families ofnanocellulose, i.e. Cellulose Nanocrystals (CNCs) and Cellulose Nanofibers (CNFs). It resultsin different properties in suspension and solid states. CNFs with their ability to formentangled network are used as dispersive network for particles. In contrast, the self-assemblyproperties of CNC are used to obtain iridescent films. First, the films based on nanocellulosewere considered as model layers. Then, results were implemented at the industrial scalewithin the papermaking process. It is proposed to use CNF based coating for savingopacifying pigments in lightweight paper, and manufacturing iridescent pigment to impartanti-counterfeiting properties. These sustainable and cost-effective approaches were thenvalidated at pilot scale.

Dans cette thèse, la fonctionnalisation de surface de nanocristaux de cellulose (NCC) par estérification et polymérisation ATRP a été envisagée, dans le but de développer de nouveaux matériaux avancés. Une méthode pratique permettant de caractériser les polymères greffés en surface des NCC a d’abords été développée, à partir des analyses DLS, DSC et TGA. L’efficacité des méthodes SI-ATRP et SI-ARGET ATRP pour initier le greffage de polystyrène (PS) ou poly(4-vinylpyridine) (P4VP) à la surface des NCC a ensuite été comparée. Les nano-hybrides P4VP-g-NCC pH-responsifs, ont alors été utilisés pour stabiliser des nanoparticules d’or (AuNPs), dans le but de produire des catalyseurs recyclables. L’activité catalytique des matériaux Au@P4VP-g-CNC obtenus – testée avec la réduction du 4-nitrophenol – a été améliorée de manière significative par rapport aux AuNPs seuls. Des polymères UV-responsifs de poly(cinnamoyloxy ethyl methacrylate) (PCEM) ont également été greffés à la surface des NCC, pour produire des particules UV-absorbantes. Les nano-hybrides PCEM-g-CNC obtenus se sont avérés efficaces comme stabilisants UV/thermiques et agents de renforts dans les films PVC. Finalement, une méthode facile pour préparer des colloidosomes à partir d’émulsions de Pickering inverses stabilisées par des NCC modifiés par des groupes cinnamates a été proposée. Des colloidosomes aux parois robustes et permettant un relargage lent de molécules encapsulées comme la rhodamine B ou l’acide désoxyribonucléique fluorescent ont alors été obtenus. / In this thesis, the surface functionalization of cellulose nanocrystals (CNC) by esterification and ATRP reactions was envisaged, with the objective to develop novel advanced materials. A convenient method to characterize the polymers grafted on CNC by Si-ATRP has been first developed, based on DLS, DSC and TGA analyses. The efficiency of the SI-ATRP and SI-ARGET ATRP methods to initiate the grating of polystyrene (PS) or poly(4-vinylpyridine) (P4VP) at the CNC surface were then compared. The pH-responsive P4VP-g-CNC nano-hybrids were subsequently utilized to stabilize gold nanoparticles (AuNPs), in view of producing recyclable catalysts. The catalytic activity of the Au@P4VP-g-CNC material – tested with the reduction of 4-nitrophenol – was significantly improved compared with single AuNPs. UV-responsive poly(cinnamoyloxy ethyl methacrylate) (PCEM) polymers were also grafted on CNC, to produce particles with UV absorbing properties. The PCEM-g-CNC nano-hybrids obtained turned out to be efficient UV/thermal stabilizers and reinforcing agents in PVC films. Finally, a facile method to prepare colloidosomes from w/o inverse Pickering emulsions stabilized by cinnamate-modified CNC was proposed. Colloidosomes with robust shells and allowing the slow release of encapsulated molecules such as rhodamine B or fluorescent deoxyribonucleic acid were then obtained.

This thesis explores new and existing cellulose nanocrystal (CNC) production methods and evaluates their effects on CNC properties, with emphasis on their thermal performance. CNCs produced from industrial and lab-scale processes possess a wide range of surface chemistries, surface charge contents, as well as structural and morphological properties which affect their performance in CNC-based applications. Despite the broad range of available CNC properties, some challenges persist, particularly in the incorporation of CNCs into hydrophobic matrices, high brine liquid formulations, and high temperature applications. Herein, sulfated and carboxylated CNCs produced from large-scale processes were thoroughly characterized and key differences in their thermal performance and self-assembly and rheological behaviors were identified. Furthermore, an optimization study on phosphoric acid hydrolysis parameters and a novel surface modification method which deposits cellulose phosphate oligosaccharides onto CNC surfaces were proposed. The optimization study revealed that CNCs with high colloidal stability could not be produced with phosphoric acid alone; however, the weak acid hydrolysis allowed for precise control over CNC length. The deposition of oligosaccharides onto CNCs, however, resulted in highly colloidally stable CNCs possessing both phosphate and sulfate functional groups. Furthermore, this surface modification method altered CNC surface charge content, water interactions, and the viscosity of their aqueous suspensions. In these studies, however, changes in CNC thermal performance were difficult to elucidate. As such, to further understand the effects of CNC properties on both their dried and aqueous form thermal performance, a systematic comparison of sulfated, phosphated, and carboxylated CNCs was performed. CNCs were produced with new acid blend hydrolyses (i.e., combining sulfuric and phosphoric acid) as well as existing organic acid hydrolyses and oxidation routes. The combined effects of surface chemistry and counterion profoundly affected the thermal performance of dried CNCs, whereby sulfated and carboxylated CNCs were less thermally stable with proton and sodium counterions, respectively. Additionally, dried CNCs with more surface charge groups, shorter cellulose chains, and higher specific surface areas were found to be less resistant to high temperatures. As such, the new CNCs produced with acid blends exhibited superior thermal performance in their dried form due to their lower charge contents and longer cellulose chains. In their aqueous suspension form, carboxylated CNCs far outperformed both sulfated and phosphated CNCs at high temperatures; their suspensions remained colloidally stable at temperatures up to 150°C for extended time periods. Overall, this thesis equips CNC users and researchers with knowledge and tools to expand the usage of CNCs in commercial applications, particularly those which require high temperatures such as melt-processed polymer composites and oil and gas extraction fluids. / Thesis / Doctor of Philosophy (PhD) / This thesis contributes to a broader effort in replacing non-renewable and emissions intensive materials with sustainable alternatives such as nanocellulose. Nanocelluloses are nanometer-sized (where one nanometer is one billionth of a meter) cellulose particles manufactured from wood, cotton, or other natural resources. Nanocelluloses are made within Canada on a tonne-per-day scale; this value-added wood product presents an opportunity to refresh the Canadian forest industry. While nanocelluloses have many potential applications, their usage is somewhat limited by their inability to resist heat. This thesis examines changes in nanocellulose properties at high temperatures and evaluates how nanocellulose production methods affect their particle properties and thermal performance. New production methods are explored that increase nanocellulose resistance to heat, alter their dimensions, and change their interactions with water. Overall, this work aims to expand the usage of nanocellulose in commercial products such as coatings, plastics, industrial fluids, food products, and cosmetics (to name a few) by helping researchers select the right kind of nanocellulose for their intended applications.

<p>Cellulose is the most abundant biopolymer on earth, derived from a variety of living species. An attractive source to obtain cellulose is from agriculture wastes, for instance, potato peel. Potato is one of the most important crops for human consumption, but in recent years its consumption in raw form has decreased, especially in developed countries. Many potatoes are processed into value-added products to meet the demand of fast food industries. So far the main use of the potato peel is sold for animal feed at very low prices. In addition, there are significant quantities of rotten potatoes generated during the years of heavy rain fall, which represent a substantial financial loss to the farmers unless an alternative industrial use can be found for the biomass. Therefore, extracting cellulose from potato peel and processing them into a higher valuable product is not only an environment-friendly solution to the disposal issues but also creates a non-food based economy for potatoes.</p> <p>Cellulose nanocrystals (CN) are a promising material and have been widely studied over the past two decades. This material is interesting as nanofiller due to its nanoscale dimensions, high specific area, and highly rigid crystalline structure. In comparison to mineral or metal nanofillers that are industrially available, cellulose nanocrystals are prepared from renewable feedstocks, feature low density, are relatively low cost, and remain biodegradable.</p> <p>This study investigated the effectiveness of cellulose nanocrystal derived from potato peel waste to improve the mechanical and barrier properties of a polymer. The nanocrystals were chemically derived from the cellulosic material in potato peel waste by alkali treatment and subsequently acid hydrolysis with sulfuric acid. Infrared spectroscopy indicated sufficient removal of lignin and hemicellulose from the raw potato peel biomass whereas X-ray diffraction confirmed that the prepared nanocrystals maintained their original crystalline lattice structure as the extracted cellulose, with a crystallinity of 85%. TEM images showed that the average fiber length of the nanocrystals was 410 nm with a diameter of 10 nm (aspect ratio of 41). Cellulose nanocrystal-filled polyvinyl alcohol (PVA) and thermoplastic starch (TPS) were prepared by solution casting method to maintain uniform dispersion of the 1-2% (w/w) fibers. An increase of 19% and 38% (starch composite) and 32% and 54% (PVA composite) in Young’s modulus was observed for the 1% and 2% CN-reinforced composites, respectively. Water vapor transmission rate measurements showed a reduction of water permeability for the PVA nanocomposite, whereas no effect was observed for starch nanocomposite.</p> / Master of Applied Science (MASc)

Polymeric bone scaffolds are a promising tissue engineering approach for the repair of critical-size bone defects. Porous three-dimensional (3D) scaffolds play an essential role as templates to guide new tissue formation. However, there are critical challenges arising from the poor mechanical properties and low bioactivity of bioresorbable polymers, such as poly(epsilon-caprolactone) (PCL) in bone tissue engineering applications. This research investigates the potential use of cellulose nanocrystals (CNCs) as multi-functional additives that enhance the mechanical properties and increase the biomineralization rate of PCL. To this end, an in vitro biomineralization study of both sulfuric acid hydrolyzed-CNCs (SH-CNCs) and surface oxidized-CNCs (SO-CNCs) has been performed in simulated body fluid in order to evaluate the bioactivity of the surface functional groups, sulfate and carboxyl groups, respectively. PCL nanocomposites were prepared with different SO-CNC contents and the chemical/physical properties of the nanocomposites were analyzed. 3D porous scaffolds with fully interconnected pores and well-controlled pore sizes were fabricated from the PCL nanocomposites with a 3D printer. The mechanical stability of the scaffolds were studied using creep test under dry and submersion conditions. Lastly, the biocompatibility of CNCs and 3D printed porous scaffolds were assessed in vitro. The carboxyl groups on the surface of SO-CNCs provided a significantly improved calcium ion binding ability which could play an important role in the biomineralization (bioactivity) by induction of mineral formation for bone tissue engineering applications. In addition, the mechanical properties of porous PCL nanocomposite scaffolds were pronouncedly reinforced by incorporation of SO-CNCs. Both the compressive modulus and creep resistance of the PCL scaffolds were enhanced either in dry or in submersion conditions at 37 degrees Celsius. Lastly, the biocompatibility study demonstrated that both the CNCs and material fabrication processes (e.g., PCL nanocomposites and 3D printing) were not toxic to the preosteoblasts (MC3T3 cells). Also, the SO-CNCs showed a positive effect on biomineralization of PCL scaffolds (i.e., accelerated calcium or mineral deposits on the surface of the scaffolds) during in vitro study. Overall, the SO-CNCs could play a critical role in the development of scaffold materials as a potential candidate for reinforcing nanofillers in bone tissue engineering applications. / Ph. D.

<p>Cellulose nanocrystals (CNCs) and its composite coatings may impart many benefits in packaging, electronic, optical, etc. applications; however, large-scale coating production is a major engineering challenge. To fill this knowledge gap, a potential large-scale manufacturing technique, roll-to-roll reverse gravure processing, has been described in this work for the manufacture of CNC and CNC-poly(vinyl alcohol) (PVA) coatings on a flexible polymer substrate. Various processing parameters which control the coating structure and properties were examined. The most important parameters in controlling liquid transfers were gravure roll, gravure speed, substrate speed, and ink viscosity. After successful fabrication, coating adhesion was investigated with a crosshatch adhesion test. The surface roughness and morphology of the coating samples were characterized by atomic force microscopy and optical profilometer. The Hermans order parameter (S) and coating transparency were measured by UV–Vis spectroscopy. The effect of viscosity on CNC alignment was explained by the variation of shear rate, which was controlled by the micro-gravure rotation. Finally, the CNC alignment effect was investigated for gas barrier and thermal management applications.</p> <p>In packaging applications, cellulose nanomaterials may impart enhanced gas barrier performance due to their high crystallinity and polarity. In this work, low to superior gas barrier pristine nanocellulose films were produced using a shear-coating technique to obtain a range of anisotropic films. Induction of anisotropy in a nanocellulose film can control the overall free volume of the system which effectively controls the gas diffusion path and hence, controlled anisotropy results in tunable barrier properties. The highest anisotropy materials showed a maximum of 900-fold oxygen barrier improvement compared to the isotropic arrangement of nanocellulose film. The Bharadwaj model of nanocomposite permeability was modified for pure nanoparticles, and the CNC data were fitted with good agreement. Overall, the oxygen barrier performance of anisotropic nanocellulose films was 97 and 27 times better than traditional barrier materials such as biaxially oriented poly(ethylene terephthalate) (BoPET) and ethylene vinyl alcohol copolymer (EVOH), respectively, and thus could be utilized for oxygen-sensitive packaging applications. </p> The in-plane thermal conductivity of CNC - PVA composite films containing different PVA molecular weights, CNC loadings and varying order parameters (S) were investigated for potential application in thermal management of flexible electronics. Isotropic CNC - PVA bulk films with 10-50 wt% PVA solid loading showed significant improvement in thermal conductivity compared to either one component system (PVA or CNC). Furthermore, anisotropic composite films exhibited in-plane thermal conductivity as high as ~ 3.45 W m-1 K-1 in the chain direction, which is higher than most polymeric materials used as substrates for flexible electronics. Such an improvement can be attributed to the inclusion of PVA as well as to a high degree of CNC orientation. The theoretical model was used to study the effect of CNC arrangement (both isotropic and anisotropic configurations) and interfacial thermal resistance on the in-plane thermal conductivity of the CNC-PVA composite films. To demonstrate an application for flexible electronics, thermal images of a concentrated heat source on both neat PVA and CNC-PVA composite films were taken that showed the temperature of the resulting hot spot was lower for the composite films at the same power dissipation.

Abstract Nanocellulose is envisioned as one of the key product innovations of future biorefineries, since it can potentially function in numerous high-end applications and replace many current petroleum-based products due to its superior properties, abundance and renewable nature. The main difficulty hindering the industrial upscaling of nanocellulose is the lack of feasible techniques for processing cellulose fibres on a nanoscale. At the same time, ongoing research efforts have concentrated on charting the suitability of nanocellulose for various novel applications. The chemical functionalization of cellulose is currently regarded as a significant step for both enhancing nanocellulose fabrication and increasing its value as a product by virtue of its adjustable surface properties. This thesis reports on the surface functionalization of cellulosic fibres by means of two new chemical pre-treatments based on periodate oxidation and sequential chlorite oxidation or reductive amination for use in the fabrication of nanocelluloses. The properties of the resulting nanocelluloses were characterized and their applicability to novel film structures was investigated. Both nanoporous thin films for composite membranes and self-standing barrier films were manufactured and studied for their suitability in water purification and packaging applications, respectively. The oxidation of cellulose to 2,3-dicarboxylic acid cellulose (DCC) significantly enhanced the nanofibril production as only 1-4 passes through the homogenizer were required for disintegration of the fibres down to nano-scale. The fabricated DCC-nanofibrils had both high optical transmittance and viscosity comparable to that of TEMPO-oxidized cellulose nanofibrils. DCC-nanofibrils with a carboxyl content of 1.75 mmol/g showed a potential for functioning as a nanoporous thin-film membrane layer in ultrafiltration tests. The second pre-treatment introduced an acid-free fabrication of amphiphilic cellulose nanocrystals (CNCs) with uniform width and length into nanocellulose production for the first time. Reaction conditions of periodate oxidation were presumed to be one of the key factors to impact the formation of either CNCs or cellulose nanofibrils. The butylamino-functionalized CNCs were used to fabricate barrier films that showed good mechanical strength and high resistance to permeation by oxygen even at elevated relative humidity. / Tiivistelmä Yksi metsäteollisuuden viimeisimmistä tuoteinnovaatiosta on nanoselluloosa, jolle on esitetty lukuisia uusia sovellusmahdollisuuksia sekä potentiaalia toimia korvaavana raaka-aineena öljypohjaisille tuotteille sen erinomaisten materiaaliominaisuuksien sekä globaalin saatavuuden ja uusiutuvuuden takia. Nanoselluloosan teollista hyödyntämistä on kuitenkin hidastanut kustannustehokkaiden valmistusmenetelmien puuttuminen. Samanaikaisesti on tehty laaja-alaista tutkimustyötä nanoselluloosan soveltuvuudesta uusiin käyttökohteisiin. Selluloosan kemiallista funktionalisointia pidetään tällä hetkellä yhtenä lupaavimpana menetelmänä tehostamaan sekä nanoselluloosan valmistusta että tuomaan lisäarvoa nanokuiduille, joiden pintaominaisuuksia voidaan muokata. Tässä työssä tutkittiin selluloosakuitujen funktionalisointia perjodaattihapetukseen sekä kloriittihapetukseen tai pelkistävään aminointiin perustuen ja nanoselluloosan valmistusta esikäsitellystä selluloosasta. Työssä tutkittiin erityisesti valmistettujen nanoselluloosien ominaisuuksia ja selvitettiin niiden soveltuvuutta uudentyyppisiin filmirakenteisiin. Filmirakenteita muokkaamalla tehtiin nanohuokoisia komposiittimembraaneita vedenpuhdistukseen sekä barrier-filmejä pakkausmateriaaleihin. Selluloosan hapetus 2,3-dikarboksyylihapposelluloosaksi tehosti nanoselluloosan valmistusta huomattavasti ja kuidut saatiin hajotettua 1-4 läpäisyllä homogenisaattorissa. Valmistetut DCC-nanofibrillit olivat optisesti läpinäkyviä sekä niiden viskositeetti oli yhtä korkea kuin aiemmin raportoiduilla TEMPO-hapetettuilla nanofibrilleillä. Ultrasuodatuskokeissa DCC-nanofibrilleistä pystyttiin muodostamaan nanohuokoinen kerros membraaninpinnalle, jota on mahdollista käyttää vedenpuhdistuksessa. Pelkistävällä aminointiesikäsittelyllä selluloosakuiduista onnistuttiin ensimmäistä kertaa valmistamaan kooltaan yhdenmukaisia amfifiilisiä selluloosananokiteitä ilman yleisesti käytettyä happohydrolyysiä. Siten työssä nanoselluloosien valmistukseen käytetyn perjodaattihapetuksen havaittiin soveltuvan sekä selluloosananokiteiden että selluloosananofibrillien valmistukseen. Butyyliamino-funktionalisoiduista selluloosananokiteistä valmistetut barrier-filmit olivat mekaanisesti vahvoja ja ne ehkäisivät hapenläpäisyä jopa korkeassa ilmankosteudessa.

Lors des dix dernières années, les films multicouches ont suscité l’intérêt de la communauté scientifique pour leurs propriétés innovantes. Principalement issus de l’association de polyélectrolytes et/ou de nanoparticules de différentes morphologies, ils ont ouvert la voie à la fabrication d’une nouvelle catégorie de matériaux nanoporeux, possédant des propriétés optiques attractives telles que la coloration structurale et l’antireflet. Les films multicouches à base de deux nanoparticules de charges opposées sont plus rares et permettent de jumeler les propriétés des deux nanoparticules utilisées et d’en faire émerger de nouvelles. Dans cette étude, nous nous sommes intéressés à deux nanoparticules anisotropes, de facteurs d’aspects contrôlés et respectivement bio/geosourcées : les nanocristaux de cellulose (NCC) et des nanotubes d’imogolite. Le but de cette étude est d’étudier la possibilité de créer un film multicouche bio-géo inspiré à base de ces deux nanoparticules par immersion et d’en étudier les propriétés optiques. Dans un premier temps, nous avons comparé les films multicouches NCC/Ge-imogolites à ceux plus communément décrits dans la littérature, à savoir, des films à base de NCC ou d’imogolite associés à un polyélectrolyte de charge opposée. Les différents paramètres de trempage comme le temps d’immersion et la force ionique de la suspension ont été variés afin d’obtenir une densité de film optimale. Pour finir la porosité des films et leur comportement dans l’eau ont été étudiés par QCM-D, ainsi que leurs propriétés optiques par mesure de transmittance. / In the past decade, multilayer thin films drew the scientific community attention for their unique properties. Indeed, principally made of an association of polyelectrolytes and/or nanoparticles, of various morphologies and chemistries, they allow the design of a range of porous nanomaterials with unique optical properties, such as structural colors or anti-reflectivity. Less commonly described, thin films made of two nanoparticles of opposite charges are gaining interest since they combine the properties of the two nanoparticles used, and generate new ones through their association. In this study, multilayer coatings were formed through the association of two anisotropic oppositely charged nanorods of well-controlled aspect ratio, i.e. bio-based anionic cellulose nanocrystals (CNC) and geo-based cationic Imogolites. This study deals with the feasibility to create a bio-geo-inspired multilayer thin film based on these two nanoparticles by dipping and characterize their optical properties. Firstly, elaboration of multilayered thin films from CNC and Ge-Imogolites nanorods, were studied in comparison with reference films incorporating CNC or Imogolites with polyelectrolytes bearing opposite charges of the nanorods. Multilayered thin films were assembled by the dipping procedure and various parameters (adsorption time, ionic strength, etc.) were varied to investigate the optimal density for the film. To finish, film porosities were investigated using QCM-D, and optical properties were investigated by transmittance measurements.