Neste trabalho são apresentados alguns resultados relacionados a estudos sobre o comportamento eletroquímico do Cu(II) em meio contendo diferentes peptídeos (tri, tetra e pentaglicina) em função da acidez utilizando-se voltametria cíclica. Os experimentos foram realizados em uma faixa de pH entre 7,0 e 10,0. Experimentos espectrofotométricos e coulométricos também foram feitos, ambos para se caracterizar as espécies de Cu(II) e Cu(III) em solução e provar a existência da degradação dos complexos de Cu(III). Além disso, experimentos para esses sistemas também foram realizados em diferentes temperaturas utilizando eletrodo rotativo na configuração disco-anel. Estudos eletroanalíticos demonstraram a potencialidade de se empregar o sistema Cu(II)/Cu(III) no desenvolvimento de metodologia eletroanalítica para a determinação de sulfito. Neste contexto, um método amperométrico indireto para a determinação de sulfito em fluxo é proposto neste trabalho. O método baseia-se na medida amperométrica (OV vs Ag/AgCI (sat. NaCI)) do Cu(III) gerado quimicamente no processo de auto¬-oxidação do S(IV) em soluções de Cu(II)/tetraglicina na presença de traços de Ni(II) utilizando uma célula em fluxo com sistema adequado para separação de gases. A oxidação espontânea do complexo pelo oxigênio dissolvido e S(IV) é muito lenta ao contrário do que ocorre quando há traços de Ni(II). A faixa de trabalho foi de 20-100 µmoIL-1 com limite de detecção de 2µmoIL-1 (S/N=3). A repetibilidade para a determinação (100µmoIL-1) levou a um desvio de 4,9% (n = 38), valor superior aos encontrados na literatura para determinações de sulfito em vinho por FIA com detecção amperométrica indireta (1-4,6%), e a freqüência analítica foi de 40h-1, valor coerente com os dos outros métodos amperométricos. Ambas as análises de sulfito em amostras de vinhos e de sucos tiveram seus resultados comparados com aqueles obtidos utilizando-se o método padrão. / The electrochemistry of Cu(II) in aqueous solutions containing triglycine, tetraglycine and pentaglycine had been investigated at glassy carbon surfaces. Experiments were carried out in the pH range between 7.0 and 10.0. A correlation between voltammetric waves and the nature of the Cu(II) species involved in the electrochemical steps was performed. Spectrophotometric and coulometric studies were also done to characterise Cu(II) and Cu(III) species in solution and prove the existence of a degradation step related to Cu(III) complexes. Rotating ring-disc voltammetry was employed to follow this chemical step coupled to the electrode reaction, at three different temperatures. Data show that Cu(III)/triglycine species degrade, with faster kinetics, when the results are compared with those obtained for tetraglycine and pentaglycine. An indirect amperometric method for the determination of sulfite in a flow injection configuration is described. The method is based on the amperometric measurement (OV vs Ag/AgCI (sat. NaCI)) of Cu(III) chemically generated by the sulfite induced autoxidation of Cu(II)/tetraglycine complex in the presence of traces of Ni(II) with a manifold that incorporates flow extraction of sulfite as SO2 through a PTFE membrane. The operational range was 2µmoIL-1 with a detection limit of 2µmolL-1 (S/N = 3). The repeatability for the determination (100 2µmolL-1) was evaluated to be 4.9% (n = 20) and the analytical frequency was 40h-1. Results for 3 wines and 2 juices samples showed excellent agreement with those obtained by using a recommended procedure for sulfite analysis.

Procedimentos analíticos baseados em medidas de quimiluminescência caracterizam-se por apresentar alta sensibilidade, baixos limites de detecção, ampla faixa de resposta linear e instrumentação simples. Uma das principais dificuldades relacionadas a este tipo de medida é maximizar a quantidade de radiação detectada, já que a emissão ocorre em todas as direções, o que dificulta o posicionamento adequado da cela de medida em relação ao sistema de detecção. Uma alternativa consiste na utilização de guias de ondas, que são dispositivos que conduzem a radiação emitida, minimizando perdas durante o transporte, tal como ocorre nos cabos de fibras ópticas. O acoplamento de sistemas de análises em fluxo com detecção por quimiluminescência é bastante conveniente, já que a mistura entre amostras a reagentes precisa ser rápida e altamente reprodutível, além de ser realizada a uma distância muito pequena do sistema de detecção, devido ao curto tempo de vida dos intermediários no estado excitado. Neste trabalho, é apresentada a avaliação de uma cela constituída por um guia de ondas para medidas de quimiluminescência. Estas ferramentas foram aplicadas à determinação de hipoclorito em amostras de líquido de Dakin por quimiluminescência empregando a reação de oxidação do luminol por hipoclorito. Também foi desenvolvido um procedimento analítico para a determinação de salbutamol, explorando a inibição da quimiluminescência da reação de oxidação de luminol por hipoclorito, caracterizando-se como uma alternativa promissora para a quantificação do fármaco. Em ambas as aplicações, os resultados foram concordantes com os obtidos por procedimentos de referência a nível de confiança de 95% / Analytical procedures based on chemiluminescence are characterized by high sensitivity, low detection limits, wide linear response ranges and simple instrumentation. One of the main troubles is to increase the amount of detected radiation, because emission occurs in all directions, making difficulty the positioning of the measurement cell in relation to the detection system. An alternative consists in the use of liquid-core waveguides, devices that constrain the emitted radiation, minimizing losses during the transport, in a similar way to optical fibers. Coupling flow analysis to chemiluminescence is attractive, because sample and reagents mixing needs to be fast, highly reproducible and accomplished close to the detector, in view of the short lifetime of the intermediates in the excited state. In this work, a cell constituted by a liquid-core waveguide was evaluated for chemiluminescence measurements. These tools were applied to the determination of hypochlorite in Dakin solution samples by chemiluminescence exploiting the oxidation of luminol by hypochlorite. An analytical procedure for salbutamol determination, exploiting the inhibition of chemiluminescence of luminol oxidation by hypochlorite, was developed, characterizing as a promising alternative for the quantification of this pharmaceutical substance. In both applications, results were in agreement to those obtained by reference procedures at the 95% confidence level

Neste trabalho, foi desenvolvido equipamento portátil e procedimentos analíticos automáticos para determinação de cátions e anions em águas usadas para consumo humano e suprimento. Os procedimentos foram baseados no processo de multicomutação em fluxo e detecção fotométrica empregando fotômetro feito no laboratório. Os sistemas de fluxo foram construídos empregando válvulas solenóide, com interface independente de comutação acionadas por computador usando apenas um canal de bombeamento. O sistema proposto foi controlado por um computador rodando um software escrito em QuickBasic 4.5. Os dói fotômetros baseados em LED foram desenvolvidos usando como detectores de radiação foto-transistores e foto-diodos. Nos dois casos a fonte de radiação (LED) e o foto-detector foram acoplados a cela de fluxo obtendo assim, uma unidade compacta. O fotômetro foi projetado para usar um foto-transistor para determinações seqüenciais de nitrato, nitrito, ferro(II), ferro(III) em águas de rios.O fotômetro proposto usa um foto-diodo para determinação de cloreto por turbidimetria, fosfato e amonium por fotometria. A sistema de fluxo foi desenhado associando-se os processos de multicomutação e multisite garantindo redução de reagente e de efluente. O sistema sistema foi empregado para determinação de cloreto, fosfato e amônio em águas de rios. Os dois sistemas propostos apresentaram excelente performance incluindo boa precisão, freqüência analítica e baixo consumo de reagente. Além disso, o sistema baseado em multisite apresentou baixo volume de efluente gerado. As dimensões reduzidas de ambos os fotômetros e do modulo de analise em fluxo, permitiram a portabilidade, o que possibilita sua aplicação em condições de campo. / In this work it was developed a portable apparatus and automatic analytical procedures for the determination of cations and anions in waters used for human consumption and industrial provisioning. The procedures were based on the multicommutation process in flow analysis and detection was performed using a homemade photometer. The flow systems were designed employing a set of solenoid valves, which were assembled to work as independent commutation units, thus under computer control several solutions were handled using a single pumping channel. The proposed system was controlled by computer running a software wrote in QuickBasic 4.5. The two LED based photometers were developed using as light detection a phototransistor and a photodiode. In both cases, the radiation source (LED) and the photodector were coupled to the flow cell in order to obtain compact unit. The photometer designed using a phototransistor was employed for the sequential determination of nitrate, nitrite, iron(II) and iron(III) in river water. The photometer designed using a photodiode was employed in the system used for the determination of chloride by turbidimetry, phosphate and ammonium by photometry. The flow system was designed associating the multisite and multicommutation process intending reduction of the reagent consumption and waste generation. The useful of the system was proved performing the determination of chloride, ammonium and phosphate in river water. The two proposed systems presented very overall performance including precision and accuracy, analytical frequency and low reagent consumption. Furthermore, the system based on multisite approach presented a very low volume of waster generation. The reduced dimensions of both photometer and flow system module allow their portability, thus we can suggest that the proposed systems are reliable for work in field condition.

A dual phase gas diffusion-FIA system containing a tubular PTFE-membrane was studied as a mean of producing gas samples for routine 15N/14N isotopic ratio mass spectrometry. The method is based on Rittenberg's reaction; the ammonium sample is injected into a liquid alkaline stream containing hypobromite and the N2 gas produced in the reaction diffuses across a PTFE-membrane into a helium carrier stream which carries it to the detector. Initially here, the use of a tubular microporous PTFE-membrane as a device for the preconcentration of samples in aqueous solutions was investigated. The performance of such a membrane was studied under a variety of operating conditions. A qualitative model of the membrane mechanism was developed based on the diffusion transport of vapour away from the contained liquid surface through the connected pore space. The dispersion undergone by the sample in the GD-FIA system containing this preconcentration unit was also studied and this FIA system was applied as a practical device for the determination and speciation of aluminium in a river water sample. The procedure for generating nitrogen gas involved optimisation of the system parameters including the oxidation reaction step and the production on-line of the chemicals used. The nitrogen gas was generated easily and rapidly, allowing a sample throughput capability of the order of 20 h-1. The system was applied to the determination of total nitrogen content in agricultural sample prepared by the Kjeldahl digestion. The method offered precision and accuracy comparable to those of the standard distillationtitration procedure. Isotope ratios were determined with good precision and means for obtaining accuracy comparable with established techniques were developed. It was also shown that the DPGD-FIA system can be readily adapted to enable different forms of nitrogen e. g. N02-, N03- and NH4+ to be determined.

Conselho Nacional de Desenvolvimento Científico e Tecnológico / In this work it is proposed the development of flow injection systems for hydride generation coupled to inductively coupled plasma mass spectrometry (FI-HG-ICPMS) for determination of trace elements (As, Bi, Sb, Se, Sn and Te) in lead alloys employed in automotive battery. Due to the characteristics of the sample matrix, manly the presence of high concentrations of lead that can interfere in hydride generation technique, a detailed investigation of the influence of the physical and chemical parameters was made. The carrier solution concentration (HCl) reductant concentration (NaBH4 solution), reaction coil length and sample volume were evaluated. As the ICP-MS is a multielmentar technique, the parameters were optimized in order to determine simultaneously the highest number of elements. Three different configurations of FI systems were tested: a) a single channel system; b) a two channel system with one gas/liquid separator; and, c) a two channel system with two gas/liquid separators. According to the characteristics of the elements, two groups were separated: one group containing As, Bi, Se and Te were 6.0 mol l-1 HCl is necessary as sample carrier solution and another group containing Sb and Sn were 0.1 mol l-1 HCl is used as sample carrier. The compromise conditions of NaBH4 concentration, carrier gas (Ar) flow rate, sample volume and reactor coil length were 0.6% (m/v), 1.25 L min-1, 87 μL and 50 cm, respectively, for both groups of elements. Both systems with two reaction channels allow the simultaneous determination of the two groups of elements. Strong analyte signal suppression in presence of Pb, Ag, Bi and Cu was observed. However, the interference could be overcome by using the optimized conditions for hydride generation. By using the proposed FI-HG-ICP-MS systems it was possible to determine relatively low concentrations of Bi, Sb, Se, Sn and Te in lead alloys. The limits of detection were 0.34, 0.01, 0.01, 0.01, 0.01, 0.01 mg g-1 of As, Bi, Sb, Se, Sn and Te, respectively. The accuracy of the developed method was evaluated by using analyte recovery tests where the results were in range 94 to 103%. / Neste trabalho foram desenvolvidos sistemas de injeção em fluxo (FI) para a geração de hidretos (HG) acoplados a espectrometria de massa com plasma indutivamente acoplado (FI-HG-ICP-MS), para a determinação de elementos traço em liga de chumbo empregada em baterias automotivas. Devido às características da matriz da amostra, principalmente devido a presença de Pb, foi feita uma investigação detalhada dos parâmetros físicos e químicos da HG como, a concentração da solução carregadora (HCl), concentração do redutor, comprimento do reator e o volume de amostra injetado. Para a eficiente geração dos hidretos voláteis foi necessário estabelecer uma condição de compromisso. Desta forma, para As, Bi, Se e Te foi usada como solução carregadora da amostra HCl 6,0 mol L-1 e HCl 0,1 mol L-1 para Sb e Sn. A concentração de NaBH4, vazão do gás de arraste (Ar), volume de amostra injetado e o comprimento do reator foram 0,6% (m/v), 1,25 L min-1, 87 μL e 50 cm, respectivamente, para ambos os grupos de elementos. Após estabelecidas as condições reacionais para a geração de hidretos, foram desenvolvidos três sistemas FI. Um sistema FI com um canal de reação e dois sistemas com dois canais de reação, com um e dois separadores gás-líquido. Os sistemas com dois canais de reação permitem a determinação simultânea dos dois grupos de elementos. Forte supressão de sinal foi observada na presença de Pb, Ag, Bi e Cu porém, estas foram contornadas, particularmente, pelas condições reacionais da geração de hidretos e o reduzido volume de amostra injetado. Desta forma, utilizando os sistemas propostos foi possível a determinação de concentrações relativamente baixas para Bi, Sb, Se, Sn e Te em amostras de liga de chumbo. Os limites de detecção obtidos foram de 0,34, 0,01, 0,01, 0,01, 0,01, 0,01 mg g-1 para As, Bi, Sb, Se, Sn e Te, respectivamente. A exatidão do método proposto foi avaliada através de teste de recuperação dos analitos, sendo que os mesmos ficaram na faixa entre 94 e 103%.

Please read the abstract in the section 00front of this document / Thesis (PhD)--University of Pretoria, 2010. / Chemistry / unrestricted

A new Ph.D research project was started early October into the Department of Civil, Environmental and Natural Resources Engineering at Luleå University of Technology (LTU) by Sarah CONRAD under the direction of Johan INGRI. The part of this project in which I participed was the determination of the concentration of Fe (II) by flow injection analysis using chemiluminescence in the Bothnia Bay. The missions were to handle the instrument and the software and to prepare also some sample standards for the calibration of the FIA. The stream water is first sampled and filtered. Then the water, containing either just the natural iron in the water or after addition of artificial iron, is analyzed by flow injection analysis in combination with luminol. The results are saved on the laptop and interpreted later. The experiments were performed on both the field and the laboratory of the University. / <p>Validerat; 20131008 (global_studentproject_submitter)</p>

A new apparatus called Bypass Trapped Flow Analysis System (ByT-FAS) is described. A properly designed ByT-FAS gives an analyst the ability to use analyte sample volumes of 10 to 200 μL [or more] and reagent volumes of approximately the same size. The sample and reagent are injected into their respective carrier streams and attain physical steady state concentrations in the detection cell within approximately 15 to 45 seconds after injection. Upon achievement of simultaneous sample and reagent physical steady state concentrations, the system flow is diverted around the detection cell and the reaction mixture is trapped in the detection cell. The concentration of the sample and reagent in the detection cell can be readily computed from knowledge of the original concentrations of the sample and reagent and the flow rates of the streams propelling the sample and reagent. ByT-FAS was demonstrated to be useful for direct measurements of analytes in liquid solutions and for assays which utilize equilibrium and/or kinetic methods to create measurable product(s) for ultraviolet/visible spectrophotometry, fluorimetry, and chemiluminescence. Enzyme activities and fundamental enzyme kinetic parameters (Kms, Kis, VMAXs) were determined directly. Genetic transcription levels of luciferase in whole intact E. coli cells were also determined using chemiluminescent detection. Flow system configuration, components, and flow ratios were investigated for their effects on achieving physical steady state signals in the detector. It is believed that this new type of instrumentation will be of significant use for the analytical chemical, biochemical, molecular biology, biotechnology, environmental, pharmaceutical and medical communities for those measurements which require direct knowledge of the concentration of the reactants and products during quantitation. / Ph. D.

The thesis is focused on a determination of heparin and chondroitin sulfate, using flow injection analysis with spectrofluorimetric detection. The determination is based on the interaction of negatively charged heparin, chondroitin sulfate resp., with a cationic dye (azure B or phenosafranine) which is manifested by the decrease in fluorescence intensity of the dye in its emission maximum. The optimal conditions for the determination in static mode were found, and calibration dependencies were measured. The conditions of FIA were optimized and following parameters were established: the volume of dispensed sample of 100 ml, the length of the reaction coil 60 cm, the flow rate 0.7 ml min-1 , the concentration of azure B 1.6×10-5 mol dm-3 , the concentration of phenosafranine 3.5×10-5 mol dm-3 . For the determination of heparin using azure B it was found: LOD = 0.023 IU ml-1 , LOQ = 0.186 IU ml-1 , and linear dynamic range 0.19-1.43 IU ml-1 . For the determination of heparin using phenosafranine it was found: LOD = 0.102 IU ml-1 , LOQ = 0.192 IU ml-1 , and linear dynamic range 0.19-1.79 IU ml-1 . For the determination of chondroitin sulfate using azure B it was found: LOD = 0.58 mg dm-3 , LOQ = 2.37 mg dm-3 , and linear dynamic range 2.37-8.32 mg dm-3 . The developed determination was applied to the...

The aim of this thesis has been design, construction and application of a flow-through nephelometric detection cell based on photodiode as a sensor and a laser source. The developed device has been tested and its function has been proven on the determination of sulphate by flow injection analysis with nephelometric detection after precipitation by barium chloride. The results achieved were comparable with those obtained by spectrometric detection. Furthermore, the device has been successfully applied to the determination of promethazine based on formation of its insoluble ion associate with bromophenol blue. Powered by TCPDF (www.tcpdf.org)