O presente estudo agrega os dados geoespaciais livres, cedidos pela prefeitura de São Paulo, IBGE, CNAE, RAIS, entre outros e particulares, cedidos pela empresa Maplink, com os recursos dos Sistemas de Informações Geográficas - SIG, para planejamento de Transportes. A megacidade de São Paulo com mais de dez milhões de habitantes tem milhares de estabelecimentos comerciais para atender a demanda dessa população, que precisa ser abastecidos. Os veículos de carga que abastecem, além de afetarem o trânsito e mobilidade urbana, emitem poluentes. O objetivo é hierarquizar as áreas da megacidade de São Paulo (Brasil) com características potenciais para alta concentração de poluentes decorrentes da circulação dos veículos de carga para abastecer os estabelecimentos comerciais. A metodologia correlaciona espacialmente os dois conjuntos de dados (localização de estabelecimentos comerciais e a circulação de veículos de transporte de cargas) utilizando ferramentas de análises espaciais, baseada em Kernel Density Estimator - KDE, a análise de multicritério, como a Analytic Hierarchy Process - AHP para avaliar como estes duas variáveis estão relacionadas, e também a lógica Fuzzy para calcular esses dados. Os resultados obtidos demonstra que as avenidas e rodovias do município de São Paulo possuem alta concentração de poluentes, sendo utilizadas como rotas para os veículos de carga que tanto fazem do município sua origem e/ou destino, as regiões que possuem alta concentração de poluentes atmosféricos são: Cerqueira César, Parque Dom Pedro II e Ibirapuera, com destaque também na Marginal Tietê e Marginal Pinheiros, além da zona leste (Itaquera e Itaim Paulista). / This study adds free geospatial data, granted by the city of São Paulo, IBGE, CNAE, RAIS, among others and individuals assigned by Maplink company with the capabilities of Geographic Information Systems - GIS for Transportation planning. The megacity of São Paulo with more than ten million inhabitants has thousands of shops to meet the needs of this population, which must be supplied. The cargo vehicles that supply, as well as affect the traffic and urban mobility, emit pollutants. The goal is to prioritize areas of the megacity of São Paulo (Brazil) with potential characteristics for high concentration of pollutants resulting from the movement of cargo vehicles to supply shops. The methodology spatially correlate the two sets of data (location of commercial establishments and the movement of cargo transport vehicles) using tools of spatial analysis based on Kernel Density Estimator - KDE, the multi-criteria analysis, as the Analytic Hierarchy Process - AHP to evaluate how these two variables are related, and also fuzzy logic to calculate this data. The results show that the avenues and highways of São Paulo have a high concentration of pollutants, being used as routes for freight vehicles that both make the city their origin and / or destination, the regions with high concentration of air pollutants they are: Cerqueira Cesar, Parque Dom Pedro II and Ibirapuera, highlighting also the Marginal Tiete and Pinheiros, besides the east side (Itaquera and Itaim Paulista).

Abstract The road freight transport industry as a labour-intensive sector is dependent on the work ability and well-being at work of employees. The majority of the occupational accidents are related to work phases outside the cab. These work phases, which are performed in various different work environments, contain several kinds of ergonomic discomforts. This poses complex challenges for the employers from a safety and productivity point of view. The framework of this thesis is based on the foundations of ergonomics and design science. The main objective was to provide knowledge that can be implemented into the design and management of work systems for local and short haul delivery operations. Material was obtained from two sources. A meta-synthesis was performed to frame holistic management in a human perspective. Furthermore, additional in-depth design knowledge was obtained through participatory ergonomics video analyses on drivers’ work outside the cab. Video analyses resulted in 262 identifications of demanding work situations where ergonomic discomforts and risks of accidents occurred. Sudden over-exertions and strains, falls and slips as well as losing control of work equipment were the most common deviations related to drivers’ work outside the cab and mainly related to physical activities of movement and carrying by hand. The majority of the work situations identified were performed in cargo spaces or elsewhere within the truck structure or at premises and yards that are administered by the customers or other stakeholders. In these environments, drivers tend to perform their work manually or using different types of work equipment. This thesis provides new in-depth knowledge on drivers’ work outside the cab. The results show that different stakeholders can contribute to drivers’ work systems. The knowledge provided by drivers and other stakeholders can be applied to holistic design and management processes at company level. Moreover, the knowledge can also be applied to broader value chain design and management processes. / Tiivistelmä Tieliikenteen tavarankuljetus työvoimavaltaisena toimialana on riippuvainen henkilöstön työkyvystä ja -hyvinvoinnista. Suurin osa tapaturmista liittyy työtehtäviin ohjaamon ulkopuolella. Näitä töitä tehdään hyvin vaihtelevissa työympäristöissä ja niihin työtehtäviin liittyy monenlaisia ergonomisia haittakuormitustekijöitä. Tämä asettaa haasteita niin työsuojelun kuin tuottavuuden näkökulmasta. Väitöskirjan viitekehys pohjautuu ergonomiaan sekä suunnittelutieteeseen. Tavoitteena on tuottaa tietoa, jota voidaan hyödyntää työjärjestelmien suunnittelussa ja johtamisessa erityisesti maaliikenteen jakelukuljetuksissa. Materiaali koostui kahdesta osiosta. Metasynteesillä muodostettiin näkemys kokonaisvaltaisesta johtamisesta ihmisnäkökulmasta. Lisäksi kuljettajat ja sidosryhmien edustajat analysoivat osallistuvan ergonomian keinoin videoaineistoa jakelukuljettajien työstä ohjaamon ulkopuolella. Videoanalyyseissa tunnistettiin yhteensä 262 työtilannetta, jossa esiintyy erilaisia ergonomisia haittakuormitustekijöitä sekä mahdollisia tapaturmariskejä. Äkilliset fyysiset kuormitukset, putoamiset, liukastumiset ja kaatumiset sekä työvälineiden hallinnan menettäminen olivat yleisimpiä tunnistettuja poikkeamia kuljettajan työssä. Pääasiassa nämä liittyivät kuljettajan liikkumiseen sekä erilaisten taakkojen kantamiseen. Valtaosassa (85 %) havainnoista kuljettaja työskenteli ajoneuvon kuormatilassa tai päällirakenteissa tai asiakkaiden tai muiden sidosryhmien hallinnoimissa työympäristöissä. Näissä työympäristöissä kuljettaja työskenteli sekä manuaalisesti käsin että hyödyntäen erilaisia apuvälineitä. Väitöskirja tarjoaa uudenlaista syvällistä tietoa kuljettajan työstä ohjaamon ulkopuolella. Eri sidosryhmät voivat osaltaan vaikuttaa kuljettajan työjärjestelmiin. Kuljettajien ja sidosryhmien tuottamaa tietoa voidaan soveltaa työjärjestelmien kokonaisvaltaisessa suunnittelussa ja johtamisessa niin yritystasolla kuin myös suunniteltaessa ja johdettaessa laajempia arvoketjuja.

The final thesis analyzes the actual situation of air transport in North America and the EU. New Open skies treaty signed by EU and USA (also EU and Canada) is the objective of the final thesis. An other goal is its influence on transatlantic flights. Moreover the final thesis treats of the allocation of the airport's slots and the actual safety situation as well. Finally there is a small part about alternative jet fuels and the perspectives of air freight transport.

International manufacturing companies are shipping goods worldwide, resulting in interorganizational freight transportation where customers, suppliers, and logistics partners are involved in the transportation processes. This interorganizational nature of freight transport emissions has made them difficult to address, as they can be seen as not being connected to only one single company’s decisions. With the relevancy, consciousness, and interest of going greener being on the rise on a global level, many studies have made a call for a wider perspective on how manufacturing companies can work with reducing Carbon Dioxide (CO2) emissions from transport related to their business. This thesis addresses that call, and the research purpose of this thesis is to explore how a manufacturing company can achieve continuous and controlled reduction of CO2 emissions from freight transport. This study develops a framework in support of decarbonizing freight transport at a manufacturing company, through the adapting of Green Supply Chain Management (GSCM) activities, enabled by Strategy and Management Control Systems (MCSs). In sum, it is explored how a manufacturing company can adapt GSCM activities for decarbonization of freight transport as part of a decarbonization strategy, that is implemented and sustained within the company through MCSs. This master thesis studies the case company Rosemount Tank Radar AB, a Sweden-based manufacturer of measurement instrumentation with high levels of export. To find the relevant strategy and management control concepts and theories, a literature study was first conducted. Based on this literature study, a case study of the company was then performed. Following the case study, case findings were analyzed and related to the concepts and theories found in the literature study, leading to the final framework. The framework constitutes the overall conclusion, and a mapping of the analysis on how manufacturing companies can reduce their CO2 emissions from freight transport through the approach based on GSCM, decarbonization strategy, and MCSs. The framework gathers identified decarbonization strategy scopes for greener transports found within the research field of GSCM and the case study. These decarbonization strategy scopes are then set in relation to the identified strategy and control management concepts and tools, that support efficient and tangible implementation of the decarbonization strategy. On a practical level, the framework developed in this thesis is suggested to bring a foundation for discussions among supply chain managers at manufacturing companies that are looking to define or redefine their decarbonization strategy in order make their freight transport greener. As the case study findings of this master thesis also proposes, greener supply chain transport practices can lead to cost savings and better customer experiences, in addition to reducing CO2 emissions.

The Master’s thesis deals with the issue of collecting mixed municipal waste from producers to a~waste-to-energy or landfills. The initial chapters are aimed to waste legislation and transportation of the waste by road freight transport across Europe. The objective is to collect the data, that are required for calculation in tool NERUDA. The next part describes the cluster analysis and different approaches in it. The selected methods of cluster analysis are apllied to the logistic task in the final chapters. The cluster analysis is considered from different aspects. The results are visualized using the software ArcGIS.

This diploma thesis deals with a design of truck-centres count and location near the motorway D1. This design is a result of aspects which can influent truck-centres‘ count, size and location. There are derived the aspects on the basis of calculation of freight transport intensity till the year 2030 and its concurrence to accident frequency, traffic flow regulation, and also its concurrence to management of personnel labour (AETR), means of eventual maintenance need and means of vehicles’ reparation, services for motorway attendants and finally its concurrence to possibilities of controls by public authorities and police. In order to regulate freight transport traffic flows is calculated size of parking spaces and suggested their appropriate locations.

We have conducted a study that is intended to investigate and understand how logistics companies in city logistics handle increased e-commerce challenges and describe what actions they take. To be able to do that, two question formulations have been formulated that goes: “What challenges, caused by an increased e-commerce, exist for logistics companies within city logistics?” and “What are logistics companies doing to address the challenges that exist and that are caused by increased e-commerce?”. Further is the theoretical frame of references presented where challenges and innovations for logistics companies in city logistics is a central point. We have used a qualitative approach, where semi-structured interviews have been used to get the essential information to be able to analyze towards our theoretical frame of references. Headliners that are found in the theoretical frame of references reappear in both the empirical material and the analysis to get a common thread throughout the study. In the analysis, we have our question formulations as headliners to really analyze challenges and innovations. Our study has contributed to an increased understanding of how logistics companies handle an increased e-commerce challenge and describe what actions they take. We have noted that the increased e-commerce has led to challenges for logistics companies in city logistics. We concluded that e-commerce has become more complex with shorter lead time, more but smaller packages and higher demands from consumers have been added, which is considered a challenge for logistics companies. The study shows the main challenges that increased e-commerce brought. The study also shows various innovations and actions by logistics companies within city logistics. / Vi har gjort en studie som är ämnad att undersöka och förstå hur logistikföretag inom citylogistik hanterar ökade e-handelsutmaningar samt beskriva åtgärder de vidtar. För att kunna göra det har vi utgått från två frågeställningar som lyder: “Vilka utmaningar, orsakade av ökad e-handel, finns för logistikföretag inom citylogistik?” och “Vad görlogistikföretag inom citylogistik för att hantera de utmaningar som finns och som är orsakade av ökad e-handel?” Vidare presenteras det teoretiska referensram där utmaningar och innovationer för logistikföretag inom citylogistik är en central del. Vi har använt oss utav ett kvalitativt angreppssätt där vi har genomfört semistrukturerade intervjuer för att få den väsentliga informationen för att kunna analysera gentemot vår teoretiska referensram. Rubriker som finns i den teoretiska referensramen återkommer i både det empiriska materialet och analysen för att få en röd tråd genom hela studien. I analysen har vi däremot våra frågeställningar som huvudrubriker för att verkligen analysera utmaningarna och innovationerna. Vår studie har bidragit med en ökad förståelse hur logistikföretag inom citylogistik hanterar ökad e-handelsutmaningar samt vilka åtgärder de vidtar. Vi har konstaterat att den ökade e-handeln har medfört utmaningar för logistikföretag inom citylogistik. E-handelslogiken har blivit mer komplex på senaste tiden där korta ledtider, fler men mindre paket och högre krav från konsumenterna har tillkommit vilket anses som utmaningar för logistikföretagen. Studien visar på de huvudsakliga utmaningarna som ökad e-handel medfört. Studien visar även på olika innovationer och åtgärder som används av logistikföretag inom citylogistik.

El presente trabajo manifiesta la situación del sector transporte donde se reconoce que las empresas de este sector contribuyen a una participación importante del PBI. Sin embargo, gran parte de estas empresas no cumplen al 100% las expectativas que tienen los clientes sobre el nivel de servicio esperado, afectando la competitividad de estas. El presente proyecto pretende abordar la problemática, la cual se centra en las entregas fuera de tiempo de la mercadería de los clientes, la cual origina que el servicio no sea aceptable. Dicha problemática engloba principalmente los siguientes procesos: recepción y almacenamiento, programación y despacho y seguimiento y entrega. Como solución, se propone una planificación de rutas de los puntos de entrega, y mejorar los procesos en el área operativa de la empresa, basándose en la metodología BPM. Para validar el proyecto, se realizará una simulación, la cual imitará el funcionamiento del sistema del área de operaciones de la empresa enfocada en los tres procesos ya mencionados. / This project shows the situation of the transport sector where is acknowledged that the companies in this specific sector have an important contribution of the GDP. However, a large part of these companies does not accomplish the 100% of the customer’s expectations according to the level of service estimated, affecting their competitiveness. This project aims to address the problem, which it is focused on the deliveries out of time of the customer’s merchandise, that causes the service to be unacceptable. This problem involves the processes of reception & storage, scheduling & dispatch, and monitoring & delivery. As a solution, the project proposes a route planning of the company's delivery points, and an improvement of the process in the operational area of the company, based on the BPM methodology. To validate the project, a simulation will be executed, which will imitate the operations of the company’s operations area, focused on the three processes already mentioned / Trabajo de Suficiencia Profesional

There has been an increase in the carbon dioxide (CO2) emissions in the last 3 decades. A large share of these emissions is produced by the transport sector. In 2010 alone, global transport accounted for 7 GtCO2 eq and approximately 23% of total energy-related CO2 emissions. In order for the decarbonisation of the transport sector, one of the most important strategies is to reduce the use of fossil fuels. Fossil fuel consumption can be reduced by rolling out more battery electric vehicles (BEVs) on public roads. This is one of the methods by which the concept of electromobility is promoted. In order to increase the share of EVs, many countries have implemented different policies that promote the electrification of the transport sector. With respect to freight transport, electric commercial vans are one of the feasible choices.  This Master thesis involves a quantitative study which focus on the “total cost of ownership” (TCO) of light commercial vehicles (LCVs). Two diesel vans currently used in Curitiba, Brazil were selected - the Sprinter van by Mercedes-Benz and the Master van by Renault. In addition, their electric counterparts were also chosen; in conjunction, a sensitivity analysis with respect to fuel prices and annual distance driven was conducted. The results showed that the TCO of the electric LCVs is around 1.6 to 1.7 times higher than their diesel versions. As far as the two van model types were concerned, the Mercedes-Benz Sprinter had a higher TCO than the Renault Master over the chosen vehicle lifetime for both the diesel and electric versions, with the difference around 7.5% for the diesel versions and approximately 13% for the electric versions.  Based on the results of the TCO study, possible economic policies and fiscal instruments were recommended with regards to light commercial freight transport for Curitiba. / Det har skett en ökning av koldioxidutsläppen (CO2) under de senaste 3 decennierna. En stor del av dessa utsläpp produceras av transportsektorn. Bara 2010 svarade, global transport för 7 GtCO2 ekvivalenter och cirka 23% av de totala energirelaterade koldioxidutsläppen. För att avkolning av transportsektorn är en av de viktigaste strategierna att minska användningen av fossila bränslen. Fossil bränsleförbrukning kan minskas genom att rulla ut fler elektriska fordon (EF) på allmänna vägar när det gäller transportsektorn i allmänhet. Detta är en av metoderna som begreppet elektromobilitet främjas. För att öka andelen elbilar har många länder genomfört olika policyer som främjar elektrifiering av transportsektorn. När det gäller godstransport, är elektriska kommersiella lastbilar och skåpbilar två av de möjliga valen.  Detta examensarbete involverar en kvantitativ studie som fokuserar på “totala ägandekostnaderna” (TÄK) för lätta nyttofordon. Två dieselbilar som för närvarande används i Curitiba, Brasilien valdes - Sprinter-skåpbilen från Mercedes-Benz och Master-skåpbilen av Renault. Dessutom valdes deras elektriska motsvarigheter; i samband med detta genomfördes en känslighetsanalys avseende bränslepriser och årlig körd distans. Resultaten visade att T för elektriska LCV är cirka 1.6 till 1.7 gånger högre än deras dieselversioner. När det gäller de två typerna av skåpbilar hade Mercedes-Benz Sprinter en högre TCO än Renault Master under den valda fordonstiden för både diesel - och elektriska versioner, med skillnaden cirka 7.5% för dieselversionerna och cirka 13% för de elektriska versionerna.  Baserat på resultaten av TCO-studien rekommenderades möjlig ekonomisk politik och finanspolitiska instrument när det gäller lätt kommersiell godstransport för Curitiba.

Trade liberalization and resultantly globalization has led to the relative free flow of goods, services, capital and people. The transport system in South Africa must be highly reliable and rapid to contribute to economic development. The focus of this research study is on the Port/Rail Interface in the Port of Durban which critically assesses the transfer of goods particularly from rail transport to and from vessels within the port precinct. Some of the major constraints identified in the study related to poor infrastructure, operations and levels of services; lack of maintenance, availability of rolling stock, locomotives and cargo stacking space. Transnet's role is pivotal in providing efficient port and rail operations and is currently upgrading infrastructure, operations and capacity of the port and rail services. One of the main objectives of the study is to present recommendations to Transnet management that arise out of the shortcomings identified during the course of the research study. / Transport Economics / M. Comm.