Nonyfenoletoxylater tillhör en grupp av ickejoniska tensider, vars nedbrytningsprodukt nonylfenol kan bioackumuleras i miljön och har långtgående negativa effekter på vattenlevande organismer. Nonylfenoler har även reproduktiv påverkan och klassas som hormonstörande. Projektet syftar därför till att ersätta nonylfenoletyoxylater mot ett säkrare och miljövänligare alterantiv inom kursen KD2350 Ytor, kolloider och mjuka material. Ytterligare bedöms olika lösningsmedels lämplighet. Analysmetoder inkluderade dropptest, DLS, och visuell granskning av emulsionssystemen. Laborationer med ickejonisk tensid utfördes med varierande koncentrationer av lösningmedel, samtensider, etoxyleringsgrad, tensidhalt och salthalt för att skapa önskade emulsionssystem. Resultaten visar att det är möjligt att ersätta etoxylerade nonylfenoler med en mindre skadlig tensid. Tensiderna beter sig dock olika och det är inte möjligt att ersätta en nonylfenol med en etoxylerad alkohol med samma etoxyleringsgrad rakt av. De slutliga erhållna emulsionssystemen var transparenta, men var mycket känsliga för temperatur. Resultaten som erhölls från projektets laborationer visar dock avvikelser från den teori som finns. Ett exempel är att flera källor skriver att ickejoniska tensider till skillnad från joniska tensider inte kräver en samtensid. Utifrån försöken bildades det inte en mikroemulsion när ingen samtensid i form av alkohol tillsattes till de ickejoniska emulsionerna. Försöket utfördes däremot endast på två tensider med etoxyleringsgrad 8 och 10. Det är möjligt att tensiderna med högre etoxyleringsgrader kan bilda mikroemulsioner utan tillsats av en samtensid.

In this thesis H-bonded systems (natural gas hydrates, water clusters, and crystal ice) are studied by density functional theory (DFT) computations. Natural gas hydrates (NGHs) play an important role in energy and environmental fields: NGHs are considered as a promising backup energy resource in the near-future due to their tremendous carbon content; improper exploration of NGHs could induce geological disasters and aggravate the greenhouse effect. In addition, many technologies based on gas hydrates are being applied and developed. The thermodynamic stabilities of various water cavities in different clathrate crystalline phases occupied by hydrocarbon gas molecules are studied by dispersion-corrected hybrid functionals. The Raman spectra of C-C and C-H stretching vibrations of hydrocarbon molecules in various water cavities in the solid state are derived. The trends of C-H stretching vibrational frequencies are found to follow the prediction by the “loose cage ─| tight cage” model. In addition, the trends and origins of 13C NMR chemical shifts of hydrocarbon molecules in various NGHs are presented. These theoretical results will enlarge the database of C-C and C-H stretching vibrational frequencies and 13C NMR parameters of hydrocarbon molecules in NGHs, and provide valuable information to help identify the types of clathrate phases and varieties of guest molecules included in NGHs samples taken from natural sites. The behavior of water clusters may help to understand the properties of its liquid and solid states. The thermodynamic stabilities and IR spectra of a small-, medium-, and large-sized water cluster are studied in this work. After full optimization of (H2O)20,54,100 using the hybrid functional B3LYP, the electronic energies, zero-point energies, internal energies, enthalpies, entropies, and Gibbs free energies of the water clusters are computed. The OH stretching vibrational IR spectra of (H2O)20,54,100 are also presented and split into sub-spectra for different H-bond types based on the specific contributions from each group. It is found that the OH stretching vibrational frequencies of water are sensitive to the conformations of the H-bonds and the vibrations of the H-bonds belonging to different types are located in separated regions in the IR spectra. Thus, the spectroscopic fingerprints will reflect the H-bond topology of the water molecules in a water cluster. Ice XI has been suggested to be involved in the process of planetary formation as a considerable electric field might be formed from the ferroelectric ice XI in space. IR and Raman spectroscopic technology can be directly used to identify the occurrence of ferroelectric ice XI in laboratory or extraterrestrial settings. Due to the difficulty for DFT to describe non-covalent systems, the performance of 16 different DFT methods applied on the ice Ih, VIII, IX, and XI crystal phases are assessed. Based on the computational accuracy and cost, the IR and Raman spectra of ice Ih and XI are derived and compared. The librational vibrations are found to be the identifier which can be used to distinguish ice Ih and ice XI in the universe. In addition, the existence only one kind of H-bond in ice Ih is demonstrated from the overlapping sub-spectra for different types of H-bonded pair configurations in 16 isomers of ice Ih. The region of water under negative pressure is an exotic land in lack of exploitation. Guest free clathrate hydrate (clathrate ice) of sII type has been recently confirmed experimentally at negative pressure. Does any other clathrate ice phase exist at negative pressure region? Since clathrate hydrate are isostructural with silica clathrate minerals and semiconductor clathrates, and crystal structure prediction by analogy with known structures and first-principles computations is an effective way to find new crystalline phases of solid materials, we are motived to look for new clathrate ice phases from silica or semiconductor clathrate materials based on first-principles computations. Borrowing the idea new clathrate frameworks of ZnO and SiC can be constructed by connecting their bubble clusters in different ways, new clathrate ice phases (sL, sL_I, sL_II, and sL_III) are generated by connecting the water bubble clusters according to different rules. Using the non-local dispersion-corrected vdW-DF2 functional, clathrate ice sL with ultralow density (0.6 g/cm3) is predicted by first-principles phase diagram computations to be stable under larger negative pressures than the sII phase. The phase diagram of water is thus extended into the lower negative pressure region.

The main objective of this thesis work was to gain understanding of the layer properties and polymer structures that were able to aid lubrication in aqueous media. To this end, three types of polyelectrolytes: a diblock copolymer, a train-of-brushes and two brush-with-anchor mucins have been utilized. Their lubrication ability in the boundary lubrication regime has been examined by Atomic Force Microscopy with colloidal probe. The interfacial behavior of the thermoresponsive diblock copolymer, PIPOZ60-b-PAMPTAM17,on silica was studied in the temperature interval 25-50 ˚C. The main finding is that adsorption hysteresis, due to the presence of trapped states, is important when the adsorbed layers are in contact with a dilute polymer solution. The importance of trapped states was also demonstrated in the measured friction forces, where significantly lower friction forces, at a given temperature, were encountered on cooling than on the preceding heating stage, which was attributed to increased adsorbed amount. On the heating stage the friction force decreased with increasing temperature despite the worsening of the solvent condition, and the opposite trend was observed when using pre-adsorbed layers (constant adsorbed amount) as a consequence of increased segment-segment attraction. The second part of the studies was devoted to the interfacial properties of mucins on PMMA. The strong affinity provided by the anchoring group of C-PSLex and C-P55 together with their more extended layer structure contribute to the superior lubrication of PMMA compared to BSM up to pressures of 8-9 MPa. This is a result of minor bridging and lateral motion of molecules along the surface during shearing. We further studied the influence of glycosylation on interfacial properties of mucin by utilizing the highly purified mucins, C-P55 and C-PSLex. Our data suggest that the longer and more branched carbohydrate side chains on C-PSLex provide lower interpenetration and better hydration lubrication at low loads compared to the shorter carbohydrate chains on C-P55. However, the longer carbohydrates appear to counteract disentanglement less efficiently, giving rise to a higher friction force at high loads. / <p>QC 20170407</p>

Water is “the matrix of life” for its fascinating properties. The well-known simple water molecule consists of one oxygen atom and two hydrogen atoms, covering most of planet earth’ssurface. It is the most studied element in science; however, its properties are still not fully understood. Another essential building block of life is proteins, which manifest naturally in aqueous environments. The protein activity is controlled by the protein folding process that is dependent on the surrounding environment. It is hypothesized that the hydrogen bond network of water plays an important role in the folding process. Here, we investigate the protein lysozyme in liquid water as well as in the crystalline state ice Ih, exploring various temperatures, using FT-IR and XRD. Our main finding is that a transition occurs at approximately T=210 K, indicative of the hypothesised protein dynamic “glass” transitionobserved by previous studies in supercooled water at similar temperatures.

In this study, 10 children’s books with water as a theme, for 1-6-year-olds have been reviewed through a content analysis, to get knowledge of how chemistry and physics are anchored and used in the books text. The results of the analysis showed a very weak use of science concepts while more everyday-words linked to water were used frequently. During the analysis, some texts in the books were considered, to be able to implement science concepts without disturbing the text flow. Why it seemed to have been avoided can possibly be linked to the different language usage and the society’s relationship to these.

<p>Processes where a molecule absorbs visible light and then converts the solar energy into chemical energy are important in many biological systems, such as photosynthesis and also in many technical applications e.g. photovoltaics. This thesis describes a part of a multidisciplinary project, aiming at a functional mimic of the natural photosynthesis, with the overall goal of production of a renewable fuel from sun and water. More specific, the thesis is focused on design and photophysical characterization of new photosensitizers, i.e. light absorbers that should be capable of transferring electrons to an acceptor and be suitable building blocks for supramolecular rod-like donor-photosensitizer-acceptor arrays.</p><p>The excited state lifetime, the excited state energy and the geometry are important properties for a photosensitizer. The work presented here describes a new strategy to obtain longer excited state lifetimes of the geometrically favorable Ru(II)-bistridentate type complexes, without a concomitant substantial decrease in excited state energy. The basic idea is that a more octahedral coordination around the Ru will lead to longer excited state lifetimes. In the first generation of new photosensitizers a 50-fold increase of the excited state lifetime was observed, going from 0.25 ns for the model complex to 15 ns for the best photosensitizer. The second generation goes another step forward, to an excited state lifetime of 810 ns. Furthermore, the third generation of new photosensitizers show excited state lifetimes in the 0.45 - 5.5 microsecond region at room temperature, a significant improvement. In addition, the third generation of photosensitizers are suitable for further symmetric attachment of electron donor and acceptor motifs, and it is shown that the favorable properties are maintained upon the attachment of anchoring groups. The reactivity of the excited state towards light-induced reactions is proved and the photostability is sufficient so the new design strategy has proven successful.</p>

<p>A molecular system capable of photoinduced water splitting is an attractive approach to solar energy conversion. This thesis deals with the functional characterization of molecular building blocks for the three principal functions of such a molecular system: Photoinduced accumulative charge separation, catalytic water oxidation, and catalytic proton reduction. </p><p>Systems combining a ruthenium-trisbipyridine photosensitizer with multi-electron donors in form of dinuclear ruthenium or manganese complexes were investigated in view of the rate constants of electron transfer and excited state quenching. The kinetics were studied in the different oxidation states of the donor unit by combination of electrochemistry and time resolved spectroscopy. The rapid excited state quenching by the multi-electron donors points to the importance of redox intermediates for efficient accumulative photooxidation of the terminal donor.</p><p>The redox behavior of manganese complexes as mimics of the water oxidizing catalyst in the natural photosynthetic reaction center was studied by electrochemical and spectroscopic methods. For a dinuclear manganese complex ligand exchange reactions were studied in view of their importance for the accumulative oxidation of the complex and its reactivity towards water. With the binding of substrate water, multiple oxidation in a narrow potential range and concomitant deprotonation of the bound water it was demonstrated that the manganese complex is capable of mimicking multiple aspects of photosynthetic water oxidation.</p><p>A dinuclear iron complex was investigated as biomimetic proton reduction catalyst. The complex structurally mimics the active site of the iron-only hydrogenase enzyme and was designed to hold a proton on the bridging ligand and a hydride on the iron centers. Thermodynamics and kinetics of the protonation reactions and the electrochemical behavior of the different protonation states were studied in view of their potential catalytic performance.</p>

A molecular system capable of photoinduced water splitting is an attractive approach to solar energy conversion. This thesis deals with the functional characterization of molecular building blocks for the three principal functions of such a molecular system: Photoinduced accumulative charge separation, catalytic water oxidation, and catalytic proton reduction. Systems combining a ruthenium-trisbipyridine photosensitizer with multi-electron donors in form of dinuclear ruthenium or manganese complexes were investigated in view of the rate constants of electron transfer and excited state quenching. The kinetics were studied in the different oxidation states of the donor unit by combination of electrochemistry and time resolved spectroscopy. The rapid excited state quenching by the multi-electron donors points to the importance of redox intermediates for efficient accumulative photooxidation of the terminal donor. The redox behavior of manganese complexes as mimics of the water oxidizing catalyst in the natural photosynthetic reaction center was studied by electrochemical and spectroscopic methods. For a dinuclear manganese complex ligand exchange reactions were studied in view of their importance for the accumulative oxidation of the complex and its reactivity towards water. With the binding of substrate water, multiple oxidation in a narrow potential range and concomitant deprotonation of the bound water it was demonstrated that the manganese complex is capable of mimicking multiple aspects of photosynthetic water oxidation. A dinuclear iron complex was investigated as biomimetic proton reduction catalyst. The complex structurally mimics the active site of the iron-only hydrogenase enzyme and was designed to hold a proton on the bridging ligand and a hydride on the iron centers. Thermodynamics and kinetics of the protonation reactions and the electrochemical behavior of the different protonation states were studied in view of their potential catalytic performance.

This thesis deals with the use of electric fields for evaluation and control of chemical systems. An electric field can result in the flow of charge across an interface between a metal and a solution, by means of chemical reactions. This interplay between electricity and chemistry, i.e. electrochemistry, is a field of crucial importance both within research and industry. Applications based on electrochemical principles encompass such diverse areas as batteries and fuel cells, pH electrodes, and the glucose monitor used by people suffering from diabetes.A major part of the present work concerns the use of static electric fields in solutions containing a non-contacted metal surface. In such a setup it is possible to control the extent of electrochemical reactions at different positions on the metal. This allows the formation and evaluation of various types of gradients on electrodes, via indirectly induced electrochemical reactions. This approach is a new and simple way of forming for instance molecular gradients on conducting surfaces. These are very advantageous in biomimetic research, because a gradient contains a huge amount of discrete combinations of for example two molecules. The basis for the technique is the use of bipolar electrochemistry. Briefly, a surface can become a bipolar electrode (an electrode that acts as both anode and cathode) when the electric field in the solution exceeds a certain threshold value, thereby inducing redox reactions at both ends. In our experiments, the driving force for these reactions will vary along the electrode surface. Since the result of an electrochemical reaction can be the deposition or removal of material from an electrode, bipolar electrochemistry can be used to create gradients of that material on a surface. In order to gain a deeper understanding of these processes, the potential and current density distributions at bipolar electrodes were investigated with different methods. Especially the use of imaging techniques was important for the visualization and analysis of the gradients. Using this knowledge, the formation of more complex gradients was facilitated, and the results were further compared to simulations based on simple conductivity models. These simulations also provided us with means to predict the behavior of new and interesting setup geometries for pattering applications.The other major part is more application driven and deals with the use of alternating electric fields for chemical analysis, a technique known as electrochemical impedance spectroscopy (EIS). In this work, EIS has been applied for the analysis of engine oils and industrial cutting fluids. Emphasis was placed on practical aspects of the measurement procedure, and on the evaluation of the results using statistical methods. It was for example shown that it was possible to simultaneously determine the amount of different contaminants in low conducting solutions. Generally, EIS is used to measure the impedance of a solution or a solid, often as a function of the frequency of the alternating electric field. The impedance of a system is closely correlated to its complex dielectric constant, and EIS can therefor be used to examine many chemical and physical processes. It is further well suited for characterizing low conducting media with little or no redox-active species. The evaluation of impedance data is often a quite complex task, which is why we have made use of statistical methods that drastically reduce the effort and quickly reveal significant intrinsic parameters.

Proton-coupled electron transfer (PCET) is one of the elementary reactions occurring in many chemical and biological systems, such as photosystem II where the oxidation of tyrosine (TyrZ) is coupled to deprotonation of the phenolic proton. This reaction is here modelled by the oxidation of a phenol covalently linked to a Ru(bpy)32+-moitey, which is photo-oxidized by a laser flash-quench method. This model system is unusual as mechanism of PCET is studied in a unimolecular system in water solution. Here we address the question how the nature of the proton accepting base and its hydrogen bond to phenol influence the PCET reaction. In the first part we investigate the effect of an internal hydrogen bond PCET from. Two similar phenols are compared. For both these the proton accepting base is a carboxylate group linked to the phenol on the ortho-position directly or via a methylene group. On the basis of kinetic and thermodynamic arguments it is suggested that the PCET from these occurs via a concerted electron proton transfer (CEP). Moreover, numerical modelling of the kinetic data provides an in-depth analysis of this CEP reaction, including promoting  vibrations  along the O–H–O coordinate that are required to explain the data. The second part describes the study on oxidation of phenol where either water or an external base the proton acceptor. The pH-dependence of the kinetics reveals four mechanistic regions for PCET within the same molecule when water is the base. It is shown that the competition between the mechanisms can be tuned by the strength of the oxidant. Moreover, these studies reveal the conditions that may favour a buffer-assisted PCET over that with deprotonation to water solution.