Durante a resposta inflamatória, diversos mediadores são liberados localmente com o objetivo de estimular a resposta imune celular e humoral. Por meio da ação das enzimas ciclooxigenases e lipoxigenases ocorrerão modificações estruturais na cadeia do ácido araquidônico levando a síntese de prostaglandinas ou leucotrienos e lipoxinas, respectivamente. Tais mediadores são responsáveis pela regulação da expressão dos genes RANK, RANKL e OPG, moduladores da osteoclastogênese. Dessa maneira, o objetivo deste estudo foi avaliar a expressão do RNA mensageiro (RNAm) para as enzimas envolvidas no metabolismo do ácido araquidônico, ciclooxigenase-2 (COX-2) e 5- lipoxigenase (5-LO), e para os mediadores da osteoclastogênese (RANK, RANKL e OPG) no tecido ósseo, após inoculação de lipopolissacarídeo bacteriano (LPS) nos canais radiculares de molares de camundongos. Posteriormente foi investigado o efeito do bloqueio farmacológico da via COX-2 induzida pelo LPS, na expressão de mediadores da osteoclastogênese e de genes envolvidos no metabolismo ósseo. Foram utilizados 144 camundongos C57BL/6, com 6 semanas de idade, pesando de 18 a 20 gramas, nos quais os canais radiculares dos primeiros molares foram inoculados com uma solução contendo lipopolissacarídeo bacteriano de E. coli (0,1, 1,0 e 10mg/ml). Decorridos os períodos experimentais de 7, 14, 21 e 28 dias, os animais foram submetidos à eutanásia e os blocos contendo dente e osso foram removidos para extração do RNA total. Em seguida, foi realizada a avaliação da expressão gênica por meio de transcrição reversa e reação da polimerase em cadeia em tempo real (qRT-PCR). A análise global da expressão de RNAm para proteínas envolvidas no metabolismo ósseo foi realizada por meio de um ensaio de PCR Array (Osteogenesis RT² Profiler PCR Array). Os valores de expressão relativa de cada RNAm, para cada grupo, foram comparados por meio da análise de variância (ANOVA) de duas vias seguido pelo pós-teste de Bonferroni ou por ANOVA de uma via seguido pelo pós-teste de Dunnett (&alpha = 0,05). A inoculação de LPS nos canais radiculares de molares de camundongos foi capaz de induzir a expressão dos genes PTGS2 e ALOX5, responsáveis pela codificação das enzimas COX-2 e 5-LO, envolvidas no metabolismo do ácido araquidônico, concomitantemente à modulação da expressão dos genes TNFRSF11A, TNFSF11 e TNFRSF11B, responsáveis pela codificação dos moduladores da osteoclastogênese RANK, RANKL e OPG, respectivamente. A administração de Indometacina, um inibidor não seletivo de COX-2, inibiu a expressão de RNAm para RANK e RANKL e estimulou a expressão de OPG durante os períodos iniciais de resposta à inoculação de LPS nos canais radiculares. A inibição da via COX-2 de metabolismo do ácido araquidônico nos períodos iniciais de resposta à inoculação de LPS nos canais radiculares modulou diferencialmente a expressão de genes envolvidos no catabolismo e anabolismo ósseo, indicando possíveis papéis para os mediadores derivados no ácido araquidônico na regulação do metabolismo ósseo. Estes resultados sugerem alvos terapêuticos importantes para intervenção precoce em doenças inflamatórias, como lesões periapicais para evitar a reabsorção do tecido ósseo. / During an inflammatory response, several mediators are locally released in order to stimulate cellular and humoral immune response. Through the action of cyclooxygenase and lipoxygenase enzymes structural changes occur in the arachidonic acid chain leading to synthesis of prostaglandins or leukotrienes and lipoxins, respectively. Such mediators are responsible for the regulation of RANK, RANKL and OPG gene expression, osteoclastogenesis modulators. Thus, the objective of this study was to evaluate the expression of messenger RNA (mRNA) for the enzymes involved in arachidonic acid metabolism, cyclooxygenase-2 (COX-2) and 5-lipoxygenase (5-LO), and the osteoclastogenesis mediators (RANK, RANKL and OPG) in bone tissue after injection of bacterial lipopolysaccharide (LPS) in murine dental root canals. Then, COX-2 pathway was pharmacologically blocked for investigation of expression of osteoclastogenesis mediators and genes involved in bone metabolism. We used 144 C57BL/6 mice, 6 weeks-old, weighing 18-20 grams, which had the first molars root canals inoculated with a solution containing LPS from E. coli (0.1, 1.0 and 10 mg/ml). After 7, 14, 21 and 28 days the animals were euthanized and the tooth-and-bone blocks were removed for total RNA extraction. Subsequently, the evaluation of gene expression was performed by reverse transcription and polymerase chain reaction in real time (qRT-PCR). Global analysis of mRNA expression for proteins involved in bone metabolism was performed using PCR arrays (Osteogenesis RT² Profiler PCR Array). The values for relative expression of each mRNA for each group were compared using two-way analysis of variance (ANOVA) followed by Bonferroni post-test or one-way ANOVA followed by Dunnett\'s test (α=0.05). The injection of LPS into the root canals was induced expression of genes PTGS2 and ALOX5, responsible for encoding COX-2 and 5-LO enzymes, involved in the metabolism of arachidonic acid, simultaneously to the modulation of gene expression of TNFRSF11A, TNFSF11 and TNFRSF11B, responsible for encoding the osteoclastogenesis modulators RANK, RANKL and OPG, respectively. Administration of Indomethacin, a non-selective inhibitor of COX-2, inhibited the expression of mRNA for RANK and RANKL and stimulated the expression of OPG during the initial response to the root canals contamination with LPS. Inhibition of the COX-2 pathway from arachidonic acid metabolism in the initial periods of response to LPS injection into the root canals differentially modulated the expression of genes involved in bone catabolism and anabolism, indicating possible roles for mediators derived from arachidonic acid in the regulation of bone metabolism. These results suggest important therapeutic targets for early intervention in inflammatory diseases such as apical periodontitis to avoid resorption of bone tissue.

The process of milling drugs to obtain samples with a desirable particle size range has been widely used in the pharmaceutical industry, especially for the production of drugs for inhalation. However by subjecting materials to milling techniques surfaces may become thermodynamically activated which may in turn lead to formation of amorphous material. Polymorphic conversions have also been noted after milling of certain materials. Salt and cocrystal formation is a good way of enhancing the properties of an API but little or no work has been published which investigates the stability of these entities when subjected to milling. Different milling techniques (ball and jet) and temperatures (ambient and cryogenic) were used to investigate the milling behaviour of polymorphs, salts and cocrystals. All materials were analysed by XRPD and DSC to investigate any physical changes, i.e. changes in melting point and by inverse gas chromatography (IGC) to investigate whether any changes in the surface energetics occurred as a result of milling. Another aim of this thesis was to see if it was possible to predict the milling behaviour of polymorphs by calculating the attachment energies of the different crystal facets using Materials Studio 4.0. These results were compared to the IGC data to see if the predicted surface changes had occurred. The data collected in this study showed that different milling techniques can have a different effect on the same material. For example ball milling at ambient temperature and jet micronisation of the SFZ tosylate salt caused a notable increase in the melting point of the material whereas ball milling at cryogenic temperatures did not cause this to happen. The IGC data collected for this form also showed a contrast between cryomilling and the other two techniques. The study also showed that the formation of salts and cocrystals does not necessarily offer any increased stability in terms of physical properties or surface energetics. Changes in melting point were observed for the SFZ tosylate salt and the IMC:Benzamide cocrystal. Changes in the specific surface energies were also observed indicating that the nature of the surfaces was also changing. The materials which appeared to be affected the least were the two stable polymorphs, gamma IMC and SFZ III. The computational approach used has many limitations. The software does not allow for conversion to the amorphous form or polymorphic conversions. Such conversions were seen to occur, particularly for the metastable polymorphs used, meaning that this computational approach may only be suitable for stable polymorphs.

L'objectif de cette thèse est d’encapsuler l'indométacine dans des nanoparticules polymériques en association à l’huile essentielle de Nigella Sativa L. extraite à partir de ses graines afin d’optimiser son utilisation par voie cutanée et potentialiser son activité anti-inflammatoire.Pour ce faire, des nanoparticules à base de poly-epsilon-caprolactone ont été préparées par nanoprécipitation. Une étude systématique a été menée pour comprendre l'effet de la variation des paramètres de préparation sur les propriétés colloïdales des nanoparticules obtenues. Une fois les différents paramètres optimisés, l'indométacine et l'huile essentielle de Nigella Sativa L. ont été encapsulées séparément dans les nanoparticules polymériques. Puis, l’ensemble, indométacine et huile essentielle de Nigella Sativa L. a été encapsulé. Les nanoparticules préparées ont à chaque fois été caractérisées notamment en termes de stabilité et de performance d’encapsulation. Ensuite, nous avons mené une étude ex vivo et in vivo des nanoparticules obtenues afin d’évaluer le potentiel de pénétration cutanée d’une part, et le potentiel clinique dans la prise en charge de l’inflammation / The objective of this PhD thesis was to extract the Nigella Sativa L. Seeds Essential Oil and its encapsulation together with indomethacin within polymeric nanoparticles in order to reduce taken amount and to enhance indomethacin cutaneous penetration, and anti-inflammatory activity. To this direction poly-epsilon-caprolactone based nanoparticles were designed using nanoprecipitation method. A systematic study was performed to figure out the effect of process and formulation parameters on the characteristics of obtained nanoparticles. Once the effects of all parameters were studied, then indomethacin and Nigella Sativa L. Seeds Essential Oil was encapsulated separately. Consequently, both together indomethacin and Nigella Sativa L. Seeds Essential Oil was encapsulated. Then prepared nanoparticles were characterized in terms of stability, encapsulation efficiency. In addition, ex vivo skin penetration and in vivo anti-inflammatory activity of designed nanoparticles was investigated

O trabalho tem como objetivo determinar a influencia da concentração de monoestearato de sorbitano, componente do núcleo oleoso das nanocápsulas, na cinética de liberação do éster etílico de indometacina a partir de nanocápsulas de poli(ε-caprolactona) (PCL). Com este propósito o éster etílico de indometacina foi associado a cada sistema e sua hidrólise alcalina foi realizada para simular uma condição sink. A velocidade de consumo do éster etílico de indometacina foi menor conforme o aumento da concentração do monoestearato de sorbitano. O tempo de meia-vida do consumo do éster etílico de indometacina associado as nanocápsulas foi relacionado com a concentração do monoestearato de sorbitano, sendo maior, enquanto maior a concentração do monoestearato. O mecanismo de liberação foi determinado como sendo transporte anômalo. Foi observada uma relação linear direta entre o aumento da concentração do monoestearato de sorbitano e a concentração de partículas nas suspensões de nanocápsulas (R2=0,9711). Mistura de outras nanopartículas que não as nanocápsulas, foram observadas e caracterizadas. O fluxo difusional do éster a partir das nanocápsulas foi determinado e diminuiu significativamente com o aumento da concentração do monoestearato, devido a mudanças na viscosidade do núcleo das nanocápsulas com o aumento da concentração do monoestearato de sorbitano. Por fim, os resultados demonstraram que o principal fator que contribui para o retardo no tempo para o consumo do éster etílico de indometacina é a relação direta entre a concentração do monoestearato de sorbitano e a permeabilidade das nanocápsulas (R=0,9894). / The aim of this work was to evaluate the influence of the sorbitan monoestearate concentration, one of the components of the oil core of the nanocapsules, in the release kinetic of the indomethacin ethyl ester-loaded poli(ε-caprolactone) nanocapsules. In this way, the indomethacin ethyl ester was entrapped within each system and its alkaline hydrolysis was carried out to simulate a sink condition. The rate for the indomethacin ethyl ester consumption decreased with the increase in sorbitan monostearate concentrations. The indomethacin ethyl ester half-live was related to the sorbitan monostearate concentration, increasing as the sorbitan monostearate concentration increased. The drug release mechanism was determined as anomalous transport. Linear correlations were obtained between the increase in the sorbitan monostearate concentration and the particles concentration in the suspensions (R2 = 0.9711). Mixture of different nanoparticles that are not nanocapsules were observed by density gradient and characterized. The indomethacin ethyl ester fluxes from the nanocapsules were determined and presented a decrease of the flux as the sorbitan monostearate concentration increased. This result was related to changes in the oil core viscosity caused by the variation of the sorbitan monostearate concentration. Finally, the results demonstrated that the main factor that contributes for the delaying in the time for the indometahcin ethyl ester consumption was the direct relation between the sorbitan monostearate concentration and the apparent permeability of the nanocapsules (R2 = 0.9894).

O trabalho tem como objetivo determinar a influencia da concentração de monoestearato de sorbitano, componente do núcleo oleoso das nanocápsulas, na cinética de liberação do éster etílico de indometacina a partir de nanocápsulas de poli(ε-caprolactona) (PCL). Com este propósito o éster etílico de indometacina foi associado a cada sistema e sua hidrólise alcalina foi realizada para simular uma condição sink. A velocidade de consumo do éster etílico de indometacina foi menor conforme o aumento da concentração do monoestearato de sorbitano. O tempo de meia-vida do consumo do éster etílico de indometacina associado as nanocápsulas foi relacionado com a concentração do monoestearato de sorbitano, sendo maior, enquanto maior a concentração do monoestearato. O mecanismo de liberação foi determinado como sendo transporte anômalo. Foi observada uma relação linear direta entre o aumento da concentração do monoestearato de sorbitano e a concentração de partículas nas suspensões de nanocápsulas (R2=0,9711). Mistura de outras nanopartículas que não as nanocápsulas, foram observadas e caracterizadas. O fluxo difusional do éster a partir das nanocápsulas foi determinado e diminuiu significativamente com o aumento da concentração do monoestearato, devido a mudanças na viscosidade do núcleo das nanocápsulas com o aumento da concentração do monoestearato de sorbitano. Por fim, os resultados demonstraram que o principal fator que contribui para o retardo no tempo para o consumo do éster etílico de indometacina é a relação direta entre a concentração do monoestearato de sorbitano e a permeabilidade das nanocápsulas (R=0,9894). / The aim of this work was to evaluate the influence of the sorbitan monoestearate concentration, one of the components of the oil core of the nanocapsules, in the release kinetic of the indomethacin ethyl ester-loaded poli(ε-caprolactone) nanocapsules. In this way, the indomethacin ethyl ester was entrapped within each system and its alkaline hydrolysis was carried out to simulate a sink condition. The rate for the indomethacin ethyl ester consumption decreased with the increase in sorbitan monostearate concentrations. The indomethacin ethyl ester half-live was related to the sorbitan monostearate concentration, increasing as the sorbitan monostearate concentration increased. The drug release mechanism was determined as anomalous transport. Linear correlations were obtained between the increase in the sorbitan monostearate concentration and the particles concentration in the suspensions (R2 = 0.9711). Mixture of different nanoparticles that are not nanocapsules were observed by density gradient and characterized. The indomethacin ethyl ester fluxes from the nanocapsules were determined and presented a decrease of the flux as the sorbitan monostearate concentration increased. This result was related to changes in the oil core viscosity caused by the variation of the sorbitan monostearate concentration. Finally, the results demonstrated that the main factor that contributes for the delaying in the time for the indometahcin ethyl ester consumption was the direct relation between the sorbitan monostearate concentration and the apparent permeability of the nanocapsules (R2 = 0.9894).

O trabalho tem como objetivo determinar a influencia da concentração de monoestearato de sorbitano, componente do núcleo oleoso das nanocápsulas, na cinética de liberação do éster etílico de indometacina a partir de nanocápsulas de poli(ε-caprolactona) (PCL). Com este propósito o éster etílico de indometacina foi associado a cada sistema e sua hidrólise alcalina foi realizada para simular uma condição sink. A velocidade de consumo do éster etílico de indometacina foi menor conforme o aumento da concentração do monoestearato de sorbitano. O tempo de meia-vida do consumo do éster etílico de indometacina associado as nanocápsulas foi relacionado com a concentração do monoestearato de sorbitano, sendo maior, enquanto maior a concentração do monoestearato. O mecanismo de liberação foi determinado como sendo transporte anômalo. Foi observada uma relação linear direta entre o aumento da concentração do monoestearato de sorbitano e a concentração de partículas nas suspensões de nanocápsulas (R2=0,9711). Mistura de outras nanopartículas que não as nanocápsulas, foram observadas e caracterizadas. O fluxo difusional do éster a partir das nanocápsulas foi determinado e diminuiu significativamente com o aumento da concentração do monoestearato, devido a mudanças na viscosidade do núcleo das nanocápsulas com o aumento da concentração do monoestearato de sorbitano. Por fim, os resultados demonstraram que o principal fator que contribui para o retardo no tempo para o consumo do éster etílico de indometacina é a relação direta entre a concentração do monoestearato de sorbitano e a permeabilidade das nanocápsulas (R=0,9894). / The aim of this work was to evaluate the influence of the sorbitan monoestearate concentration, one of the components of the oil core of the nanocapsules, in the release kinetic of the indomethacin ethyl ester-loaded poli(ε-caprolactone) nanocapsules. In this way, the indomethacin ethyl ester was entrapped within each system and its alkaline hydrolysis was carried out to simulate a sink condition. The rate for the indomethacin ethyl ester consumption decreased with the increase in sorbitan monostearate concentrations. The indomethacin ethyl ester half-live was related to the sorbitan monostearate concentration, increasing as the sorbitan monostearate concentration increased. The drug release mechanism was determined as anomalous transport. Linear correlations were obtained between the increase in the sorbitan monostearate concentration and the particles concentration in the suspensions (R2 = 0.9711). Mixture of different nanoparticles that are not nanocapsules were observed by density gradient and characterized. The indomethacin ethyl ester fluxes from the nanocapsules were determined and presented a decrease of the flux as the sorbitan monostearate concentration increased. This result was related to changes in the oil core viscosity caused by the variation of the sorbitan monostearate concentration. Finally, the results demonstrated that the main factor that contributes for the delaying in the time for the indometahcin ethyl ester consumption was the direct relation between the sorbitan monostearate concentration and the apparent permeability of the nanocapsules (R2 = 0.9894).

A preparação de partículas pela técnica de granulação por solidificação de material fundido em leito fluidizado tem se destacado no âmbito da indústria farmacêutica. As vantagens do uso deste método têm atraído muitos pesquisadores para aprimorar e colocar em prática tal técnica de preparo. A principal vantagem deste processo é dispensar o uso de solventes e diminuir o tempo de preparo dos granulados para compressão. O objetivo do presente trabalho foi o desenvolvimento e estudo desta técnica de granulação, usando a lactose tipo spray-dried como substrato e como agente aglutinante uma dispersão do polímero polietilenoglicol 4000 contendo indometacina como fármaco modelo. Outra motivação para este trabalho foi realizar a caracterização físico-química dos granulados obtidos e avaliar um possível aumento da solubilidade deste fármaco de classe II. Resultados obtidos durante estudos preliminares mostram que a solubilidade da indometacina foi consideravelmente aumentada com o uso do PEG e análises físico-química indicaram que não há interação entre a indometacina e o PEG. O método utilizado na granulação consistiu na atomização da dispersão liquefeita de PEG 4000 contendo 25% de indometacina sobre o substrato a fim de obter grânulos contendo estes três componentes. Um estudo prévio da fluidodinâmica da lactose provou ser predominante o regime de leito fluidizado. Para viabilizar a obtenção destas dispersões sólidas, foram estudadas as variáveis do processo como vazão da dispersão carreador/fármaco, vazão do ar de atomização e quantidade total de dispersão adicionada, aplicando para tal um planejamento fatorial tipo Box-Behnken. O leito fluidizado se mostrou eficiente para a granulação e os granulados obtidos foram considerados de boa qualidade baseando-se na sua caracterização por densidades aparente e compactada, fluidez, distribuição granulométrica, doseamento do fármaco e perfil de dissolução in-vitro. Granulados de dois tamanhos médios diferentes e com ótima fluidez foram escolhidos para as análises seguintes. A integridade e ausência de interação do fármaco com os demais componentes destes granulados foram comprovadas por calorimetria exploratória diferencial, difração de raios-X, infravermelho, microscopia de plataforma quente e microscopia de varredura eletrônica. As micrografias mostraram visivelmente que as formas dos cristais de indometacina presentes no granulado apresentaram as características da forma y (II), que é a mesma da indometacina padrão. A dissolução de cápsulas gelatinosas duras contendo os lotes de grânulos escolhidos mostraram que no meio tampão fosfato (pH 7,2) foi liberado até 99% da indometacina. Porém, em meio HCl 0,1N; obteve-se liberação de até 28% da indometacina, o que corresponde a um aumento de 14,5 vezes a liberação obtida com a indometacina padrão. / Recently, there is a renewed interest in the fluidized bed hot melt granulation for the preparation of solid dosage forms in the pharmaceutical industry and academy. The several advantages of this technique have attracted may researchers, but the main advantage are undoubtedly the solvent free operation and the short processing times. The aim of this work was to develop and study this granulation technique using spray-dried lactose as substrate and a dispersion of indomethacin in hot melted polyethylene glycol 4000 and as the binder. Another goal in this work was to characterize the granules obtained and to evaluate any increase in indomethacin solubility in the solid dispersions. The results of preliminary evaluation of indomethacin/polyethylene glycol physical mixtures and solid dispersions showed a considerable increase in the drug solubility, while no chemical or physical interaction with the carrier could be observed. Before the granulation experiments the fluid dynamic behavior of the lactose was characterized as fluidization regime. The method of granulation consisted in the atomization of hot melted polyethylene glycol containing 25% of indomethacin onto the fluidized bed of lactose. In order to study the granulation process, a Box-Behnken design was applied to verify the effects of spray air flow rate, drug/carrier feed rate and total amount of drug/carrier added to granules. The fluidized bed showed to be an effective method for hot melt granulation and the granules quality can be considered adequate, based on their characteristics of apparent and compacted densities, flowability, particle size distribution, indomethacin content and in-vitro dissolution profile. From the whole set of experiments, two granule batches were chosen based on their mean particle sizes and excellent flow indexes, to verify any drug/PEG/lactose interaction during the granulation process. The non existence of interaction was proved by differential scanning calorimetry, X-ray powder diffraction, Fourier transform Infra-red, hot stage microscopy and scanning electron microscopy. The scanning electron microscopy showed that indomethacin crystals with the characteristic shape of the form y (II) could be observed in the granules, indicating that its crystalline form did not change during processing. The dissolution profiles of indomethacin from hard gelatin capsules containing the granules showed the release of 99% of the drug in phosphate buffer media (pH 7.2). However, in acidic media (HCl 0,1N) 28% of the total indomethacin was released, which corresponded to a 14.5 fold increase when compared to the pure indomethacin release under the same conditions.

Made available in DSpace on 2016-05-02T13:54:48Z (GMT). No. of bitstreams: 1 JusleneAparecidaOliveiraCosta-dissertacao.pdf: 896769 bytes, checksum: 1744062ba6c85af80f07a70043a38f54 (MD5) Previous issue date: 2009-10-09 / Helianthus annus is a plant known as "sunflower". The use of plants as medicine for human use dates back to the old age. The hydroalcoholic extract of sunflower seed (HESS) has been indiscriminately used for gastric lesions, without scientific support to validate their action. This study assessed quantitatively and qualitatively the probable gastric protection of HESS in stress, and in the use of ethanol and indomethacin; checked the acidity (pH) through the gastric pylorus ligation (gastric residue, either pure or added with water); and compared differences in pH values in both techniques. A total of 120 rats (5 in each group) of the species Rattus norvegicus albinus, weighing 150-230g,were divided into 24 groups, which received the following treatments: HESS: 250mg/kg, 500mg/kg, 1000mg/kg and 2000mg / kg; ethanol; cimetidine; indomethacin; water; cimetidine and ethanol; cimetidine and endomethacin; pylorus ligation and water; pylorus ligation and cimeditine; HESS and ethanol; HESS and indomethacin; pylorus ligation and HESS. The results were submitted to analysis of variance (ANOVA) followed by Tukey test for evaluation of gastric lesions, and Kruskal-Wallis test followed by Dunn, to evaluate the gastric pH, with a statistically significance at p <0.05. This work was approved by the Ethics Committee of the Universidade José do Rosário Vellano, with protocol no. 04 A / 2009. The results showed that HESS 250 mg/kg and 1000mg/kg suggests probable gastric protection in stress. In the ethanol-induced gastric ulcer model, the doses of 250 and 1000 mg / kg showed probable gastric protection; the HESS 250 mg / kg + indomethacin, the dose of 250 mg / kg suggests gastric protection. Regarding the pH, the gastric residue, when pure, is more acidic than water, thus indicating that the model of addition of 3 ml of water is increasing the pH, thus proving that the pure pH model is more appropriate and more practical. Therefore, the data obtained in this study show that HESS probably provides gastric protection at certain doses. So, the results show that the sunflower,should be further studied for the development of phytomedicines or new chemicals with antiulcerogenic activity. / Helianthus annus é uma planta conhecida como girassol . A utilização das plantas, como medicamento para o tratamento das enfermidades que acometem a espécie humana remonta à idade antiga. O uso do extrato hidroalcoólico de semente de girassol (EHSG) para lesões gástricas é utilizado de forma indiscriminada, sem base em estudos científicos que tenham validado sua ação. O presente estudo tem como objetivo comparar quantitativamente e qualitativamente a provável proteção gástrica do EHSG com a cimetidina, frente ao estresse, ao uso da indometacina e do etanol e o pH gástrico por meio da ligadura pilórica (resíduo gástrico puro e com adição de água). Foram estudados 120 ratos (5 em cada grupo) da espécie Rattus norvegicus albinus, com peso de 150-230g, divididos em 24 grupos distintos, os quais receberam o EHSG nas dosagens de 250mg/kg, 500mg/kg, 1000mg/kg e 2000mg/kg, etanol 0,5ml, cimetidina 150mg/ml, indometacina 20mg/Kg e água 1ml. Estes grupos foram submetidos à associação da cimetidina com etanol e indometacina, às 4 dosagens do EHSG com etanol 70% e indometacina, aos grupos submetidos à ligadura pilórica e administração de água, cimetidina e às 4 dosagens de EHSG. As análises estatísticas dos resultados foram realizadas por meio de análise de variância (ANOVA), seguidas pelo teste de Tukey, para avaliação das lesões no estômago, e Kruskal-Wallis, seguido pelo teste Dunn, para avaliação do pH do estômago, utilizando diferença estatisticamente significante para p<0,05. O presente trabalho foi encaminhado e aprovado pelo Comitê de Ética em Pesquisa da Universidade José do Rosário Vellano, com o protocolo 04 A / 2009. Os resultados do estudo mostraram que o EHSG nas dosagens 250 e 1000mg/kg sugerem proteção contra as lesões gástricas no estresse. No modelo de indução de úlcera gástrica por etanol, as dosagens de 250 e 1000 mg/kg apresentaram provável proteção gástrica; no grupo utilizando EHSG 250 mg/kg + indometacina, a dosagem de 250 mg/kg sugere proteção gástrica. Em relação ao valor de pH, o resíduo gástrico, quando verificado puro, mostrou-se mais ácido que pelo modelo da adição de água, significando que este último aumentou o pH, verificando assim que o modelo do resíduo gástrico puro é mais indicado e mais prático. Portanto, os resultados obtidos no presente estudo apontam provável efeito protetor gástrico do EHSG em determinadas doses. Assim, pode-se concluir que a planta em questão constitui interessante alvo de estudo, visando ao desenvolvimento de fitomedicamentos ou à busca de novas entidades químicas com ação antiulcerogênica.

The process of milling drugs to obtain samples with a desirable particle size range has been widely used in the pharmaceutical industry, especially for the production of drugs for inhalation. However by subjecting materials to milling techniques surfaces may become thermodynamically activated which may in turn lead to formation of amorphous material. Polymorphic conversions have also been noted after milling of certain materials. Salt and cocrystal formation is a good way of enhancing the properties of an API but little or no work has been published which investigates the stability of these entities when subjected to milling. Different milling techniques (ball and jet) and temperatures (ambient and cryogenic) were used to investigate the milling behaviour of polymorphs, salts and cocrystals. All materials were analysed by XRPD and DSC to investigate any physical changes, i.e. changes in melting point and by inverse gas chromatography (IGC) to investigate whether any changes in the surface energetics occurred as a result of milling. Another aim of this thesis was to see if it was possible to predict the milling behaviour of polymorphs by calculating the attachment energies of the different crystal facets using Materials Studio 4.0. These results were compared to the IGC data to see if the predicted surface changes had occurred. The data collected in this study showed that different milling techniques can have a different effect on the same material. For example ball milling at ambient temperature and jet micronisation of the SFZ tosylate salt caused a notable increase in the melting point of the material whereas ball milling at cryogenic temperatures did not cause this to happen. The IGC data collected for this form also showed a contrast between cryomilling and the other two techniques. The study also showed that the formation of salts and cocrystals does not necessarily offer any increased stability in terms of physical properties or surface energetics. Changes in melting point were observed for the SFZ tosylate salt and the IMC:Benzamide cocrystal. Changes in the specific surface energies were also observed indicating that the nature of the surfaces was also changing. The materials which appeared to be affected the least were the two stable polymorphs, gamma IMC and SFZ III. The computational approach used has many limitations. The software does not allow for conversion to the amorphous form or polymorphic conversions. Such conversions were seen to occur, particularly for the metastable polymorphs used, meaning that this computational approach may only be suitable for stable polymorphs.

We studied the effects of 30 minutes of exercise on T lymphocyte counts and proliferative responses of peripheral blood mononuclear cells (PBMC) in 25 runners. Exercise resulted in a T lymphocytosis in the immediate post-exercise period in all subjects (p < 0.001), and reduced CD4+/CD8+ ratios in 22/25 subjects (p = 0.001). The change was due primarily to a 2.2-fold increase in CD8+ cells (p < 0.001). Exercise also reduced PBMC mitogenic responses to phytohemagglutinin (PHA) in 13/14 subjects (p = 0.049), and to pokeweed mitogen (PWM) in 11/14 subjects (p = 0.022), but not to concanavalin A. Postrun sera from 5 of 6 subjects inhibited PHA but not PWM responses of resting autologous PBMC with normal CD4+/CD8+ ratios (p < or = 0.05): indomethacin and monocyte depletion blocked the serum inhibition (p = 0.003, p = 0.0006, respectively). We conclude that post-exercise suppression of mitogenic responses to PHA is due to the release of a serum factor(s) capable of inducing prostaglandin synthesis by circulating monocytes, whereas exercise-induced suppression of PWM responses depends primarily on the reversal of CD4+/CD8+ ratios.