Proteins are known to form functional clusters in plasma membranes. In order to identify individual proteins within clusters we developed a method to visualize by atomic force microscopy (AFM) the cytoplasmic surface of native plasma membrane, excised from Xenopus laevis oocyte and spread on poly-L-lysine coated glass. After removal of the vitelline membrane intact oocytes were brought in contact with coated glass and then rolled off. Inside-out oriented plasma membrane patches left at the glass surface were first identified with the lipid fluorescent marker FM1-43 and then scanned by AFM. Membrane patches exhibiting the typical phospholipid bilayer height of 5 nm showed multiple proteins, protruding from the inner surface of the membrane, with heights of 5 to 20 nm. Modelling plasma membrane proteins as spherical structures embedded in the lipid bilayer and protruding into the cytoplasm allowed an estimation of the respective molecular masses. Proteins ranged from 35 to 2,000 kDa with a peak value of 280 kDa. The most frequently found membrane protein structure (40/μm2) had a total height of 10 nm and an estimated molecular mass of 280 kDa. Membrane proteins were found firmly attached to the poly-L-lysine coated glass surface while the lipid bilayer was found highly mobile. We detected protein structures with distinguishable subunits of still unknown identity. Since X. laevis oocyte is a generally accepted expression system for foreign proteins, this method could turn out to be useful to structurally identify specific proteins in their native environment at the molecular level. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Systemisch applizierte Therapeutika können erhebliche Nebenwirkungen auslösen, welche auf Grund eines unspezifischen Transports oder einer hohen Dosis von appliziertem Wirkstoff auftreten. Daher bedarf es der Entwicklung neuartiger Wirkstoff-Transportsysteme (Drug Delivery Systems) welche in der Lage sind, Wirkstoffe in genau definierbaren Dosen gezielt in die adressierte Zelle zu transportieren. Ein vielversprechender Ansatz, welcher diesen Anforderungen nachkommt, findet sich in der Layer-by-Layer-Technik (LbL), d.h. der wechselseitigen Assemblierung von Polymeren/Wirkstoffen auf soliden sphärischen Templaten, eines funktionellen Supported Lipid Bilayers sowie der Oberflächenfunktionalisierung mit spezifischen Antikörpern. Dabei ist die Homogenität und Regularität des Supported Lipid Bilayers von großer Bedeutung, um in biomedizinischen Anwendungen eine ungewollte Interaktion mit Serumkomponenten sowie eine Opsonierung zu verhindern. Insbesondere die funktionelle Lipidkomponente besitzt allerdings maßgebliche Auswirkungen auf diese Parameter. In dieser Arbeit wurde die Idee der Oberflächenfunktionalisierung von LbL-beschichteten Silica-Mikropartikeln (SiO2) mit einem funktionellen Supported Lipid Bilayer aufgegriffen und weiterentwickelt, wobei insbesondere die Homogenität des Supported Lipid Bilayers auch auf sehr kleinen Längenskalen (wenige Nanometer) bestimmt wurde. In einem letzten Schritt konnte anhand zweier verschiedener Zelllinien (3T3 und Vero) die Adaptivität und Effektivität des entwickelten Drug Delivery Systems nachgewiesen werden.

Les toxines formeuses de pore (PFTs) sont des protéines exogènes responsables d’un grand nombre de maladies infectieuses qui perméabilisent les membranes cellulaires de leur hôte. La formation des pores ou l’introduction d’une enzyme dans le cytoplasme peut entrainer l’apparition de symptômes de maladies connues (l’anthrax, le botulisme) et, dans le pire des cas, la mort. Les mécanismes d’infection et de destruction des cellules infectées sont bien caractérisés. Toutefois, l’aspect dynamique des changements de conformation durant le processus de perméabilisation reste à découvrir pour la majorité des toxines formeuses de pore. Le but de cette thèse est d’étudier les mécanismes d’oligomérisation des PFTs, ainsi que la formation des pores à la membrane lipidique grâce à la spectroscopie de fluorescence. Nous avons choisi la toxine Cry1Aa, un bio pesticide produit par le bacille de Thuringe et qui a été rigoureusement caractérisé, en tant que modèle d’étude. La topologie de la Cry1Aa à l’état actif et inactif a pu être résolue grâce à l’utilisation d’une technique de spectroscopie de fluorescence, le FRET ou transfert d’énergie par résonance entre un fluorophore greffé au domaine formeur de pore (D1) et un accepteur non fluorescent (le DPA ou dipicrylamine) localisé dans la membrane et qui bouge selon le potentiel membranaire. Le courant électrique, ainsi que la fluorescence provenant de la bicouche lipidique membranaire horizontale ont été enregistrés simultanément. De cette manière, nous avons pu localiser toutes les boucles reliant les hélices de D1 avant et après la formation des pores. Dans la forme inactive de la toxine, toutes ces boucles se trouvent du côté interne de la bicouche lipidique, mais dans sa forme active l’épingle α3-α4 traverse du côté externe, alors que toutes les autres hélices demeurent du côté interne. Ces résultats suggèrent que α3-α4 forment le pore. Nous avons découvert que la toxine change significativement de conformation une fois qu’elle se trouve dans la bicouche lipidique, et que la Cry1Aa attaque la membrane lipidique de l’extérieur, mais en formant le pore de l’intérieur. Dans le but de caractériser la distribution de toxines à chaque extrémité de la bicouche, nous avons utilisé une technique de double FRET avec deux accepteurs ayant des vitesses de translocation différentes (le DPA et l’oxonol) dans la membrane lipidique. De cette manière, nous avons déterminé que la toxine était présente des deux côtés de la bicouche lipidique durant le processus de perméabilisation. La dynamique d’oligomérisation de la toxine dans une bicouche lipidique sans récepteurs a été étudiée avec une technique permettant le compte des sauts de fluorescence après le photoblanchiment des fluorophore liés aux sous unités composant un oligomère présent dans la bicouche lipidique supportée. Nous avons confirmé de cette manière que la protéine formait ultimement des tétramères, et que cet état résultait de la diffusion des monomères de toxine dans la bicouche et de leur assemblage subséquent. Enfin nous avons voulu étudier le « gating » de la colicine Ia, provenant de la bactérie E.Coli, dans le but d’observer les mouvements que font deux positions supposées traverser la bicouche lipidique selon le voltage imposé aux bornes de la bicouche. Nos résultats préliminaires nous permettent d’observer un mouvement partiel (et non total) de ces positions, tel que le suggèrent les études de conductances du canal. / Pore forming toxins (PFTs) are exogenous often pathogenic proteins that permeabilize the host membrane. Permeabilization or subsequent introduction of an enzyme leads to health disorders and sometimes death. Although the fundamental infection and destruction mechanisms are known, the underlying molecular basis and their link to the structural information remains undetermined for many pore forming toxins. The purpose of this thesis was to study the mechanisms of oligomerization on the membrane and pore formation of PFTs using fluorescence spectroscopy in planar lipid bilayer. We chose Cry1Aa as the most intensively studied member of Bacillus thuringiensis’s toxins. In order to probe the topology both in inactive and active congformation, we used Förster resonance energy transfer (FRET) between a fluorophore site-directedly attached to different positions in the pore forming domain (D1) of Cry1Aa toxin and an acceptor compound dipicrylamine (DPA) in the membrane, which moves in response to the membrane potential. Electrical current and fluorescence emission from planar lipid bilayers in a horizontal configuration were simultaneously recorded. We probed all loops between the seven α helices of D1. All of them were located on the inner leaflet of the bilayer prior to pore formation. In the active form, the α3-α4 hairpin were found to translocate back to the outer leaflet of the bilayer, whereas all other positions remained in the inner leaflet, suggesting that α3-α4 are the pore lining helices. The toxins undergo significant conformational changes once they enter the host membrane, and we found Cry1Aa to attack from the exterior but translocate to the interior. To estimate the distribution of the toxins on either side of the membrane, we used the double-FRET technique. Here, two different acceptors (DPA and oxonol) with different dynamics (time constants) allowed us to determine that approximately equal amounts of the toxin were present on either leaflet during the permeabilization process. We also studied the oligomerization mechanism of Cry1Aa toxins inserted into supported lipid bilayers using a single subunit counting technique based on the step-wise photodestruction (bleaching) of the attached fluorophores. This system allowed determining the number of subunits composing each oligomer. We found that oligomerization is a highly dynamic process which occurs after insertion into the bilayer by lateral diffusion. The final (likely the pore forming) entity of the toxin is tetrameric. Finally, we used the same FRET approach to investigate the gating process of two positions of the pore forming domain of colicin Ia, an antibiotic toxin produced by E. coli. These positions were suspected to translocate reversibly from the outer to the inner leaflet during the gating process. In preliminary results, we found that these positions are moving between the two leaflets of the bilayer during pore formation.

Das Peptid Amyloid-beta wird seit vielen Jahren mit der Alzheimer''schen Demenz in Verbindung gebracht, aber die Verbindung zwischen dem Peptid und der Herkunft der Symptome bleibt unklar. Eine neue Hypothese besagt, dass Wechselwirkungen von Mono- oder Oligomeren des Amyloid-beta mit neuronalen Zellmembranen zu Veränderungen der Membran-Doppelschichtsruktur führen und Störungen dynamischer Prozesse in den Membranen verursachen können. Mit Methoden der Röntgen- und Neutronenstreuung wurden die Struktur und Dynamik von Modellmembranen und Änderungen durch den Einfluss des Peptids Amyloid-beta auf die Modellmembranen untersucht. Es konnte gezeigt werden, dass Monomere des Peptidfragments Amyloid-beta 22-40 in anionische Lipidmembranen eingebaut werden. Mittels quasielastischer-inkohärenter Neutronenstreuung wurde die Dynamik von Lipidmembran untersucht. Ein Anteil von 1,5 mol % Amyloid-beta 22-40 in einer Lipidmembran bei 30°C verursacht eine Verringerung der Diffusionskoeffizienten sowohl der Schwerpunktbewegung der Lipide im ns-Bereich als auch der Dynamik der Fettsäurereste im ps-Bereich. Andererseits wird in der Gelphase der Lipidmembran bei 15°C ein Anstieg der Diffusionskoeffizienten beider Prozesse beobachtet. Eine Serie von Lipidproben mit unterschiedlichem Cholesteringehalt und eingelagerten Peptiden Amyloid-beta 1-42 und Amyloid-beta 22-40 wurde Mittels Röntgendiffraktion charakterisiert. Für das Peptid Amyloid-beta 22-40 wurden zwei Positionen gefunden, eine auf der Oberfläche der Membran, eine zweite in der Membran eingelagert. Das Peptid Amyloid-beta 1-42 ist teilweise in die Membran eingelagert und ist in einer 40 mol % Cholesteringehaltige Membrane durch eine einzelne Position modelliert. Zusätzlich wird der Entwurf und die Inbetriebnahme der BerILL Feuchtekammer beschrieben. / The peptide amyloid-beta has long been associated with Alzheimer’s disease; however the link between the peptide and the origin of symptoms is poorly understood. An emerging hypothesis is that monomeric and oligomeric forms of the peptide interact with neuronal membranes, resulting in perturbations in the bilayer structure and in the dynamic processes which take place in the bilayer. Using X-ray and neutron scattering techniques, the structure and dynamics of model lipid membranes and the changes which arise in the presence of amyloid-beta peptide fragments have been studied. Monomers of the peptide fragment amyloid-beta 22-40 were found to intercalate into an anionic lipid bilayer. Through quasi-elastic neutron scattering, dynamics of bilayer lipids were observed. The presence of 1.5 mol % of the peptide results in a decrease in the diffusion coefficients for lipid centre of mass motion on the nanosecond time-scale, as well as for the lipid tail dynamics on the picosecond scale at 30°C. On the other hand, in the gel-phase of the lipid, at 15°C, an increase in the diffusion coefficients for both of these processes was observed. A series of samples with various cholesterol content and either the amyloid-beta 22-40 peptide fragment or the amyloid-beta 1-42 full length peptide was characterized using X-ray diffraction. The amyloid-beta 22-40 peptide was found to populate two positions, on the surface and embedded in the bilayer. The amyloid-beta 1-42 peptide embeds itself into the membrane, and is modelled by a single population for high cholesterol levels (40 mol % cholesterol). In addition, the design and commissioning of the BerILL humidity chamber, a sample environment with precise temperature and humidity control compatible with neutron scattering experiments is presented.

A estabilidade de vesículas unilamelares gigantes (GUVs) foi monitorada através de microscopia de contraste de fase e de fluorescência, com o auxílio de gradientes de açúcares, do fluoróforo 1,3,6,8 pireno tetrasulfonato de sódio (PTS), do supressor de fluorescência cloreto de 1,1\'-dimetil-4,4\'-bipiridínio (MV) e do análogo lipídico fluorescente 2-(12-(7-nitrobenz-2-oxa-1,3-diazol-4-il) amino) dodecanoil-1-hexadecanoil-sn-glicero-3-fosfocolina (NBD-PC). Uma grande variabilidade no comportamento individual das GUVs foi obtida no que tange a: (i) manutenção do meio interno; (ii) interações da bicamada lipídica com superfícies e; (iii) estruturas lipídicas conectadas à bicamada. Os resultados experimentais podem ser explicados pelo aparecimento de poros transientes formados pelo aumento da tensão da bicamada lipídica das GUVs. Após o processo de geração de tensão na bicamada, poros são abertos para relaxação desta tensão, com concomitante efluxo da solução internalizada pela GUV, devido a pressão de Laplace. Com a diminuição do volume interno, a tensão da bicamada é relaxada e o fechamento dos poros guiado pela tensão de linha, minimizando o componente energético de curvatura dos lipídios nas bordas do poro. O modelo de poros transientes explica resultados como troca de massa entre meios interno e externo das GUVs, possibilidade da existência de fluxos unilaterais em GUVs, transitoriedade dos poros, diâmetro limite dos poros e manutenção do meio interno em GUVs após abertura e fechamento de poros. / The stability of giant unilamellar vesicles (GUVs) has been monitored by phase contrast and fluorescence microscopy, using sugar gradients, sodium 1,3,6,8 pirene tetrasulfonate (PTS) as fluorescent probe, 1,1\'-dimethyl-4,4\'-bipiridinium chloride (MV) as fluorescence quencher and 2-(12-(7-nitrobenz-2-oxa-1,3-diazol-4-il) amino) dodecanoyl-1-hexadecanoyl-sn-glicero-3-phosphocholine (NBD-PC) as fluorescent lipid analog. An accentuated variability in the individual behaviour of GUVs was observed as far as (i) stability of encapsulation; (ii) lipid bilayer-surface interactions and; (iii) lipid structures connected to GUVs are concerned. Experimental results can be explained by transient pores formation due to an increase in lipid bilayer tension. After processes of bilayer tension generation, pores are opened, while effluxes of GUVs internal solution are promoted by Laplace pressure. With the internal volume decrease, bilayer tension is relaxed and pores closure guided by line tension, minimizing the energetic component of lipid curvature in pore edges. Transient pores model explains experimental results such as mass exchange between internal and external GUVs media, GUVs effluxes, pores\' lifetime, pores diameter\'s limit and stability of GUV encapsulation after opening and closure of pores.

Much of our knowledge of cellular biology arises from direct observation of active cellular functions. Tools and techniques have steadily developed over the past several hundreds of years to aid in our understanding and control of the nanoworld and are referred to as nanotechnologies. In the context of nanotechnology, DNA is not used as a carrier for genetic information (as it is in cell), but as a construction material. DNA offers unprecedented control over the construction of simplified biomimetic models for the study of biological processes. This thesis first introduces and defines the field of DNA nanotechnology, with particular emphasis on the interaction of snthetic DNA nanostructures with biological membranes. Inspired by the protein clathrin, three-fold symmetric DNA tile made of eight, short DNA strands and capable of polymerising is described and studied, with the aim to interact with and controllably bend a membrane bilayer. This structure presented challenges during construction so an enhanced three-armed DNA structure built with DNA origami was designed. The succesful assembly of a rigid and functionalisable nanostructure is described. This origami structure was polymerised into large constructs in solution and on a supported lipid membrane. The shape of the structure was modulated to vary its curvature and apply a bending force to a lipid vesicle when anchored to it. Following the conclusion of this study, we present the construction of a small, unique DNA structure for enhanced electron microscopy imaging in cell lysate. This project is part of a developing technique to couple the interaction specificity of dyes in super-resolution microscopy and the high-resolution output of electron microscopy. Finally, the optimisation procedures and recommendations for TEM imaging of samples of DNA origami and lipid structures are discussed.

<p>Intracellular membrane trafficking is regulated by a large number of protein complexes and lipids. Blocking of trafficking disrupts normal membrane dynamics and causes membrane stress. Two similar proteins from <i>Saccharomyces cerevisiae</i>, Myr1 and Smy2, each containing a polyproline-binding GYF domain, were discovered in separate screens for dosage suppressors of trafficking mutations. The functions of GYF domain proteins are poorly described despite its determined structure and a number of known polyproline peptide ligands. We predicted, using computational analysis, associations between mRNA decay factors and both Myr1 and Smy2, and further demonstrated that they localize to sites of mRNA degradation upon stress, in a GYF domain dependent manner.</p><p>Ypt6 is a small GTPase that regulates vesicle docking at the late Golgi in budding yeast. Myr1 was found as a novel suppressor during the screening of a genomic library in a null ypt6 mutant. Myr1 additionally was capable of rescuing the temperature sensitive growth of a Ric1 deficient strain. Importantly, Ric1 is an activator of Ypt6 and is synthetic lethal with Myr1. Biochemical characterization of the Myr1 protein revealed a limited solubility and an ability to bind cellular membranes, likely relevant to the rescue of trafficking mutants.</p><p>We further assayed the affinity of Myr1 domains to liposomes of distinct composition. Preference for negatively charged lipids suggested possible electrostatic interactions with polybasic clusters within C-terminal regions of Myr1. In contrast, the N-terminus with the GYF domain was found to be capable of self-association. Membrane stress caused by a lipid-bilayer perturbing drug resulted in induced formation of mRNA processing bodies. Cumulatively, these studies suggest that Myr1 functions in the regulation of mRNA stability via its GYF domain, and can sense membrane stress by binding to the lipid bilayer.</p>

Intracellular membrane trafficking is regulated by a large number of protein complexes and lipids. Blocking of trafficking disrupts normal membrane dynamics and causes membrane stress. Two similar proteins from Saccharomyces cerevisiae, Myr1 and Smy2, each containing a polyproline-binding GYF domain, were discovered in separate screens for dosage suppressors of trafficking mutations. The functions of GYF domain proteins are poorly described despite its determined structure and a number of known polyproline peptide ligands. We predicted, using computational analysis, associations between mRNA decay factors and both Myr1 and Smy2, and further demonstrated that they localize to sites of mRNA degradation upon stress, in a GYF domain dependent manner. Ypt6 is a small GTPase that regulates vesicle docking at the late Golgi in budding yeast. Myr1 was found as a novel suppressor during the screening of a genomic library in a null ypt6 mutant. Myr1 additionally was capable of rescuing the temperature sensitive growth of a Ric1 deficient strain. Importantly, Ric1 is an activator of Ypt6 and is synthetic lethal with Myr1. Biochemical characterization of the Myr1 protein revealed a limited solubility and an ability to bind cellular membranes, likely relevant to the rescue of trafficking mutants. We further assayed the affinity of Myr1 domains to liposomes of distinct composition. Preference for negatively charged lipids suggested possible electrostatic interactions with polybasic clusters within C-terminal regions of Myr1. In contrast, the N-terminus with the GYF domain was found to be capable of self-association. Membrane stress caused by a lipid-bilayer perturbing drug resulted in induced formation of mRNA processing bodies. Cumulatively, these studies suggest that Myr1 functions in the regulation of mRNA stability via its GYF domain, and can sense membrane stress by binding to the lipid bilayer.

Lipid molecules are amphiphilic in nature consisting of a hydrophilic head group and hydrophobic hydrocarbon tails. The lipid bilayer consists of two layers of lipid molecules arranged with their hydrophobic tails facing each other and their hydrophilic head groups solvated by water. Lipid bilayers with hydrophilic polymer chains grafted onto the head groups have applications in various fields, such as stabilization of liposomes designed for targeted drug delivery, synthesis of supported bilayers for biomaterial applications, surface modification of implanted medical devices to prevent biological fouling and design of in vitro biosensors. The focus of this thesis lies in understanding the effects of polymer grafting on the thermodynamics and mechanical properties of lipid bilayers. Dissipative particle dynamics (DPD) has evolved as a promising method to study complex soft matter systems. The basic DPD algorithm, and its implementation are discussed in Chapter 2 of this thesis. It is important to achieve a tensionless state while studying phase transitions and deducing the mechanical properties of the bilayer. We proposed a modification of the Andersen barostat which can be incorporated in a DPD simulation to achieve the tensionless state as well as carry out simulations at a prescribed tension. In Chapter 3 of this thesis the effect of polymer grafting on single tailed lipid bilayers is studied. Simulations are carried out by varying the grafting fraction, Gf, defined as the ratio of the number of polymer molecules to the number of lipid molecules. At lowGf, the bilayer shows a sharp transition from the gel (Lβ) to the liquid crystalline (Lα) phase. This main melting transition temperature is lowered as Gf is increased. Corresponding to this, an increase in the area per head group is also observed. Above a critical value of Gf the interdigitated, LβI phase is observed prior to the main transition for the longer lipid tails. The analysis for two tailed lipids as a function of polymer chain length is extensively studied in Chapter 5. For the case of two tailed lipids, an intermediate interdigitated phase was not observed and the decrease in the melting temperature is more pronounced as the length of the polymer chain is increased. The scaling for fractional change in the area per head group, as well as the decrease in transition temperature as a function of polymer grafting are in good agreement with mean field theory predictions. The bending modulus (k) and area stretch modulus (kA) are essential for determining the shape and the mechanical stability of biological cells or lipid based vesicles. In simulations, the bending modulus k is evaluated from the Fourier transform of the out-of-plane fluctuations of the bilayer mid-plane. In Chapter 4 of this thesis, we illustrate that a surface representation based on Delanuay triangulation provides a robust parameter free representation of the bilayer surface. By evaluating the bending modulus for single tail lipids of different tail lengths, the continuum scaling relation d2 is verified. To our knowledge this is the first systematic investigation and verification of this scaling relationship using computer simulations. Using the continuum relation, =kAd2/ we find that α depends weakly on the tail lengths of the bilayer. Nevertheless we illustrate that a value of α=130 can be used to reliably estimate the bending modulus from the area stretch modulus for polymer free bilayers. Using our method, we are also able to capture the low q scalings and obtain the bending modulus of the gel (Lβ) phase. Grafted polymer was found to increase the value of the bending modulus for single tail lipids. Although the presence of polymer directly increases the area per head group, the suppressed height fluctuations dominate and the bending modulus increases for the single tail lipids. For two tail lipids a small decrease in the bending modulus was observed at low grafting fractions and short polymer chains. For large polymer lengths the bending modulus was found to increase monotonically.

PEG-lipid stabilized bilayer disks have been found in lipid mixtures containing polyethylene glycol (PEG)-lipids where the combination of a high bending rigidity and low PEG-lipid/lipid miscibility favours disk formation. The disks are planar and circular in shape and their long-term stability is excellent. Theoretical calculations and experimental observations suggest that the micelle forming PEG-lipid are situated at the rim of the aggregate, protecting the hydrophobic lipid chains in the bulk of the aggregate from contact with water. This thesis deals with fundamental aspects concerning the lipid distribution in the disks, as well as with development, optimization, and initial evaluation of the disks as model membranes in partition and interaction studies. Small angle neutron scattering was used to study the partial segregation of components within the bilayer disk. The experiments verified that the PEG-lipids segregate and accumulate at the bilayer disk rim. The proof of component segregation is important from a fundamental point of view and useful, as exemplified in the below-mentioned study of melittin-lipid interaction, when interpreting partition or binding data obtained from studies based on bilayer disks. Today liposomes are often used as model membranes in partition and interaction studies. Using liposomes to predict, e.g., drug partitioning can however have certain drawbacks. In this thesis the disks were proven to be attractive alternatives to liposomes as model membranes in partition studies. The formation of bilayer disks by a technique based on detergent depletion enabled incorporation of a transmembrane protein in the bilayer disks and opened up for the use of disks as model membranes in membrane protein studies. Further, bilayer disks were used in a comparative study focused on the effect of aggregate curvature on the binding of the peptide melittin. Various techniques were used to perform initial evaluations of the bilayer disks as model membranes. Of these, capillary electrophoresis and biosensor-based technology had not been used before in combination with bilayer disks.