La NAP-XPS est un nouvel outil révolutionnaire permettant d'utiliser les avantages d'une analyse XPS (Sensibilité aux différents éléments chimiques ainsi que leurs états) à une pression proche de l'ambiante (de l'ordre du mbar) ouvrant ainsi la voie aux études in situ en se rapprochant des conditions réels et. Deux domaines profitent de cette nouvelle machine : la chimie environnementale et la catalyse. Dans le domaine de la chimie environnementale je m'intéresse à l'étude de l'hydratation des argiles dites gonflantes. J'ai ici démontré qu'il est effectivement possible de suivre l'hydratation des contre-ions en mettant en évidence différents comportement en fonction de leurs natures. De plus j'ai pu mettre en évidence un phénomène de radiolyse sous faisceau de la pyridine en présence d'eau dans ces milieux confinés. Concernant la catalyse, j'ai étudié l'oxydation du CO sur des nanocatalyseurs composés notamment de platine un excellent catalyseur, mais sensible aux problèmes d'empoisonnement au CO. Cette réaction est pour nous une réaction prototype permettant de tester le comportement des nanocatalyseurs (Pt, Zn et PtZn). J'ai pu déterminer la température de début de la réaction d'oxidation du CO, de plus en ajoutant du zinc au platine et pour former un nanocatalyseur bimétallique, j'ai démontré qu'on améliore sa résistance à l'oxidation et il montré que le zinc seul est lui aussi capable de catalyser l'oxidation du CO sous forme de création/destruction de carbonate. / The NAP-XPS is a revolutionary new tool that makes possible to use the advantages of a standard XPS analysis (sensitivity to the different chemical elements as well as their states) at a near-ambient pressure (mbar range) thus enabling in situ studies closer to real conditions. Two fields fully benefit from this new machine: environmental chemistry and catalysis. In our case for the field of environmental chemistry we are interested in studying the hydration of so-called swelling clays. I have here demonstrated that it is indeed possible to follow the hydration of counter-ions and highlighted different behavior according to their natures. Moreover, I have been able to demonstrate a beam induced pyridine photolysis phenomenon in the presence of water in these confined media. Concerning catalysis, I studied the oxidation of CO on nanocatalysts composed in particular of platinum an excellent catalyst but sensitive to the CO poisoning. This reaction is for us a prototypical reaction to test the behavior of Pt, Zn, PtZn nanocatalysts. Here, I have been able to determine the onset temperature of the CO oxidation reaction. Moreover, by adding zinc to platinum and forming a bimetallic nanocatalyst, I have improved its resistance to oxidation and proved that zinc alone is also capable of catalyzing the oxidation of CO in the form of creation / destruction of carbonate.

The diploma thesis concerns the study of catalytic layers Pt-CeOx used in Proton-Exchange Membrane Fuel Cells. Employing a Transmission Electron Microscope and Near-Ambient Pressure Photoelectron Spectroscopy, morphology, particle size distribution, chemical composition, and effects of fuel cell conditions were studied. This work contributes to the clarification of the dynamic character of the prepared catalytic layers in reactive conditions, which is essential for understanding their catalytic activity and durability.

No description available.

My dissertation focuses on (i) the development sputtered films for solid phase microextraction (SPME) and (ii) the comprehensive characterization of materials using a suite of analytical techniques. Chapter 1 reviews the basics of SPME. This chapter also contains (i) a discussion of various sputtering techniques, (ii) a discussion of two techniques I focused on most of my work: spectroscopic ellipsometry (SE) and X-ray photoelectron spectroscopy (XPS). Chapter 2 focuses the major part of my work, which is to prepare new solid phases/adsorbents for SPME via silicon sputtering followed by thermal deposition of a polymer, polydimethylsiloxane (PDMS). PDMS was deposited by a simple gas phase technique which has never before been applied to prepare SPME stationary phases. The coatings were characterized by time-of-flight mass spectrometry (ToF-SIMS), XPS, scanning electron microscopy (SEM), SE, and contact angle goniometry. The extraction efficiencies of ca. 1.8 µm sputtered, PDMS-coated fibers were compared to a commercial fiber (7 µm PDMS) for a series of polycyclic hydrocarbons (PAHs). Large carry-over and phase bleed peaks are observed in case of commercial PDMS-based SPME coatings, which decrease the lifetime and usefulness of these fibers. It is of great significance that our sputtered fibers exhibit very small or negligible carry-over peaks and phase bleed peaks under the same conditions. Chapter 3 focuses on the multi-instrument characterization of copper and tungsten films sputtered by direct current magnetron sputtering (DCMS) and high-power impulse magnetron sputtering (HiPIMS) using a modern sputter source. The resulting films were characterized by energy dispersive X-ray spectroscopy (EDX), XPS, SEM, atomic force microscopy (AFM), SE, and X-ray diffraction (XRD). By EDX and XPS, all the sputtered films only showed the expected metal peaks. By XPS, the surfaces sputtered by DCMS were richer in oxygen than those produced by HiPIMS. By AFM, both surfaces were quite smooth. By SEM, the HiPIMS films exhibited smaller grain sizes, which was further confirmed by XRD. The crystallite sizes estimated by XRD are as follows: 18.2 nm (W, HiPIMS), 27.3 nm (W, DCMS), 40.2 nm (Cu, HiPIMS), and 58.9 nm (Cu, DCMS). By SE, the HiPIMS surfaces showed higher refractive indices, which suggested that they were denser and less oxidized than the DCMS surfaces. Chapter 4 reports characterization of liquid PDMS via SE, which required some experimental adaptations. The transmission measurements were obtained via a dual cuvette approach that eliminated the effects of the cuvettes and their interfaces. Only the reflection measurements were modeled with a Sellmeier function which produced decent fits. Chapters 5 consists of contributions to Surface Science Spectra (SSS) of near-ambient XPS spectra of various unconventional materials including cheese, kidney stone, sesame seeds, clamshell, and calcite. This dissertation also contains appendices of tutorial articles I wrote on ellipsometry and vacuum equipment.

My dissertation is primarily divided into two parts. The first deals with the preparation, functionalization, and characterization of carbon surfaces prepared by direct current magnetron sputtering (DCMS) and high power impulse magnetron sputtering (HiPIMS) as substrates for bioarrays. Part two discusses applications of XPS peak fitting in surface chemical analysis. Chapter 1, the introduction, includes (i) a discussion of the construction of bioarrays and the preparation of sputtered surfaces, e.g., by DCMS and HiPIMS, and also functionalization (bioconjugate) chemistry with special emphasis on the importance of covalent functionalization of surfaces, and (ii) a discussion of the surface characterization techniques and accompanying analysis methods I have primarily used, which include X-ray photoelectron spectroscopy (XPS), near-ambient pressure XPS (NAP-XPS), XPS peak fitting, and contact angle goniometry (wetting). Chapter 2 discusses the preparation, characterization, and functionalization of DCMS and HiPIMS carbon surfaces for bioarrays. Here, two functionalization chemistries are explored, where the activity of DCMS and HiPIMS carbon towards amidation and amination is compared. Chapter 3 focuses on the use of Gaussian-Lorentzian sum (GLS) and Gaussian-Lorentzian product (GLP) line shapes in the context of peak fitting XPS narrow scans. This discussion includes a comparison of the GLS and GLP line shapes with the Voigt function. Chapters 4 and 5 discuss the applications of XPS peak fitting in materials characterization. Chapter 4 talks about XPS data analysis in the context of the chemical vapor deposition of various aminosilanes and their effect on peptide stability and purity. Chapters 5 describes the surface chemical analysis of various materials by NAP-XPS, including accompanying data analysis and/or peak fitting. The materials probed here cannot be analyzed at ultra-high vacuum by conventional XPS, hence, they are analyzed by NAP-XPS. Chapter 5 is divided into 5 sections. Section 5.1.1 discusses the characterization and analysis of a solution of bovine serum albumin (BSA) by peak fitting the C 1s and O 1s peak envelopes. Section 5.1.2 discusses the analysis of polytetrafluoroethylene (PTFE) at different pressures. Here, the effect of increasing background pressure and X-ray illumination time on the equivalent widths of the F 1s narrows scans is shown. Environmental charge compensation is also discussed here. Section 5.1.3 includes the analysis of poly(γ-benzyl L-glutamate) (PBLG), where the C 1s and O 1s peak envelopes were peak fitted to determine/confirm the structure and composition of this polymer. Section 5.1.4 contains an analysis and comparison of three different human hair samples: (i) untreated, (ii) colored, and (iii) bleached. Here, a comparison of the Si 2p, S 2p, and C 1s peaks illustrates the effects of the different treatments. Section 5.1.5 shows the characterization and analysis of liquid and solid phosphate buffered saline (PBS). Chapter 6 presents conclusion of my work and discusses future work.

Tesis por compendio / [ES] El cambio climático es una de las amenazas de nuestro tiempo. Los gases de efecto invernadero, como el CO2, son los principales causantes de este fenómeno, siendo necesario disminuir urgentemente sus emisiones. En 2019, la Comisión Europa presentó el "Pacto Verde Europeo", que será clave para alcanzar un objetivo tremendamente ambicioso para nuestra región: la neutralidad climática de aquí a 2050. Las estrategias de descarbonización incluidas en su hoja de ruta van a implicar necesariamente la transición energética de los combustibles fósiles a las energías renovables, reduciendo de forma masiva la liberación de CO2. En este sentido, el desarrollo de tecnologías efectivas de Captura, Almacenamiento y Uso del Carbono (CAUC) permitirá la valorización del CO2, evolucionando hacia una economía de carbono circular. La presente Tesis Doctoral se enmarca en el diseño, síntesis y caracterización de sistemas catalíticos heterogéneos innovadores basados en metales capaces de transformar el CO2 en otros productos de valor añadido. Entre un amplio catálogo de reacciones que "conectan" el CO2 con diversos compuestos basados en carbono, esta Tesis se centrará principalmente en la síntesis de dos moléculas C1 plataforma de interés industrial: el metanol y el metano. Los Capítulos 3 y 4 están dedicados a la síntesis de metanol, un proceso exotérmico limitado termodinámicamente debido a la estabilidad inherente de la molécula de CO2, así como a la presencia de la reacción competitiva RWGS. Por un lado, el Capítulo 3 se centra en el efecto promotor del galio sobre las propiedades estructurales, electrónicas y catalíticas de materiales basados en Cu/ZnO (sistemas CZG). Mediante un enfoque espectroscópico-catalítico multidisciplinar se ha comparado el efecto promotor del Ga3+ dopado en la red de un ZnO tipo wurtzita presente en un catalizador Cu/ZnO/Ga2O3 con el de una fase de galato de zinc (ZnGa2O4). Por otro lado, en el Capítulo 4 se muestra un catalizador bifuncional que contiene nanopartículas de Cu de 2 nm y especies Cu+, con el objetivo de enfrentarse a la inherente baja actividad de estas pequeñas partículas, hecho que impide mejorar la eficiencia atómica de los catalizadores, dificultando así la obtención de resultados catalíticos competitivos en la hidrogenación de CO2. La realización de un estudio espectroscópico detallado (combinado con cálculo teórico y ensayos catalíticos) sobre un catalizador óxido mixto de Cu-Mg-Al derivado de un precursor de hidrotalcita tras calcinación y posterior reducción (CuHT-230) pone de manifiesto el papel clave de los iones Cu+ dopados en estructura en la producción de metanol. El éxito de las tecnologías CAUC a medio-largo plazo dependerá no solo del desarrollo de catalizadores competitivos, sino también de su capacidad para operar en condiciones de reacción más suaves, permitiendo que estos procesos sean viables económicamente. Por ello, el concepto de eficiencia energética se abordará en el Capítulo 5, a través de un innovador diseño de catalizador tipo "shell/core" formado por un núcleo de rutenio metálico y una envoltura de carburo de rutenio, sintetizado via hidrotermal. Este sistema (Ru@EDTA-20) exhibe una actividad excepcionalmente alta para la hidrogenación de CO2 a metano a bajas temperaturas (160-200 °C) con una selectividad a CH4 del 100%, superando a catalizadores de bibliografía que normalmente operan a mayores temperaturas (400-500 °C). Por último, en el Capítulo 6 se estudia un catalizador modelo compuesto por un alumino-silicato bidimensional sintetizado sobre una superficie de Ru(0001), investigación realizada durante mi estancia internacional en el Laboratorio Nacional de Brookhaven (Nueva York, EE.UU.). La combinación de estos materiales en el mismo composite permite la creación de un nanoespacio confinado que puede emplearse como nanorreactor. En este proyecto, se seleccionó la reacción de formación de agua como modelo, que se exploró a nivel fundamental en el sincrotrón NSLS-II. / [CA] El canvi climàtic és una de les amenaces del nostre temps. Els gasos d'efecte d'hivernacle, com el diòxid de carboni, són els principals causants d'aquest fenomen, sent necessari reduir urgentment les seues emissions. En 2019, la Comissió Europea va presentar el "Pacte Verd Europeu", que serà clau per a aconseguir un objectiu tremendament ambiciós per a la nostra regió: la neutralitat climàtica d'ací a 2050. Les estratègies de descarbonització incloses en el seu full de ruta implicaran necessàriament la transició energètica dels combustibles fòssils a les energies renovables, reduint de manera massiva l'alliberament de CO2. En aquest sentit, el desenvolupament de tecnologies efectives de Captura, Emmagatzematge i Ús del Carboni (CEUC) permetrà la valorització del CO2, evolucionant cap a una economia de carboni circular. La present Tesi Doctoral s'emmarca en el disseny, síntesi i caracterització de sistemes catalítics heterogenis innovadors basats en metalls capaços de transformar el CO2 en altres productes de valor afegit. Entre un ampli catàleg de reaccions que "connecten" el CO2 amb diversos compostos basats en carboni, aquesta Tesi se centrarà principalment en la síntesi de dues molècules C1 plataforma d'interés industrial: el metanol i el metà. Els Capítols 3 i 4 estan dedicats a la síntesi de metanol, un procés exotèrmic limitat degut tant a l'estabilitat inherent de la molècula de CO2 com a la presència de la reacció competitiva RWGS. D'una banda, el Capítol 3 se centra en l'efecte promotor del gal·li sobre les propietats estructurals, electròniques i catalítiques de materials basats en Cu/ZnO (sistemes CZG). Mitjançant un enfocament espectroscòpic-catalític multidisciplinari s'ha comparat l'efecte promotor del Ga3+ dopat en la xarxa d'un ZnO (wurtzita) present en un catalitzador Cu/ZnO/Ga2O3 amb el d'una fase de ZnGa2O4. D'altra banda, en el Capítol 4 es mostra un catalitzador bifuncional que conté nanopartícules de Cu de 2 nm i espècies Cu+, amb l'objectiu d'enfrontar-se a la inherent baixa activitat d'aquestes petites partícules, fet que impedeix millorar l'eficiència atòmica dels catalitzadors, dificultant així l'obtenció de resultats catalítics competitius en la hidrogenació de CO2. La realització d'un estudi espectroscòpic detallat (combinat amb càlcul teòric i assajos catalítics) sobre un catalitzador òxid mixt de Cu-Mg-Al derivat d'un precursor de hidrotalcita després de calcinació i posterior reducció (CuHT-230) posa de manifest el paper clau dels ions Cu+ dopats en estructura en la producció de metanol. L'èxit de les tecnologies CEUC a mig-llarg termini dependrà no solament del desenvolupament de catalitzadors competitius, sinó també de la seua capacitat per a operar en condicions de reacció més suaus, permetent que aquests processos siguen viables econòmicament. Per això, el concepte d'eficiència energètica s'abordarà en el Capítol 5, a través un innovador disseny de catalitzador tipus "shell/core" format per un nucli de ruteni metàl·lic i un embolcall de carbur de ruteni, sintetitzat mitjançant tractament hidrotermal. Aquest sistema (Ru@EDTA-20) exhibeix una activitat excepcionalment alta per a la hidrogenació de CO2 a metà a baixes temperatures (160-200 °C) amb una selectivitat a CH4 del 100%, superant a catalitzadors de bibliografia que normalment operen a majors temperatures (400-500 °C). Finalment, en el Capítol 6 s'estudia un catalitzador model compost per un alumino-silicat bidimensional sintetitzat sobre una superfície de Ru(0001), investigació realitzada durant la meua estada internacional en el Laboratori Nacional de Brookhaven (Nova York, els Estats Units). La combinació d'aquests dos materials en el mateix "composite" permet la creació d'un nano-espai confinat que pot emprar-se com nano-reactor. En aquest projecte, es va seleccionar la reacció de formació d'aigua com a model, que es va explorar a nivell fonamental en el sincrotró NSLS-II. / [EN] Climate change is one of the existential threats of our times. Greenhouse gases (GHG), such as carbon dioxide, are primary drivers of this phenomenon, and their emissions need to be urgently reduced. In 2019, the European Commission presented the European Green Deal, which will help the EU to attain an ambitious goal for our region: to become carbon-neutral by 2050. The decarbonization strategies included in the roadmap towards net-zero emissions will imply the energy transition from fossil fuels to renewable energies, with a massive reduction of CO2 deliverance. In this sense, the development of effective Carbon Capture and Storage (CCS) and Carbon Capture and Utilization (CCU) technologies will allow the valorization of CO2, evolving into a circular carbon economy. The present Doctoral Thesis focuses on the design, synthesis and characterization of innovative heterogeneous metal-based systems, which are able to transform CO2 into value-added products. Among a wide catalogue of reactions that "connects" CO2 with various carbon-based compounds, this thesis will be devoted to the synthesis of two C1 platform chemicals of industrial interest: methanol and methane. Chapters 3 and 4 are dedicated to methanol synthesis, a highly hampered exothermic process due to the inherent stability of the CO2 molecule and the presence of the competitive reverse water-gas shift reaction (RWSG). On the one hand, Chapter 3 is focused on the promoting effect of gallium on the structural, electronic, and catalytic properties of Cu/ZnO based materials (CZG systems). In particular, the promoting effect of Ga3+-doped in the wurtzite ZnO lattice of a Cu/ZnO/Ga2O3 catalyst is compared to that of a zinc gallate (ZnGa2O4) phase following a multimodal spectroscopic-catalytic approach. In Chapter 4, a bifunctional catalyst containing 2 nm Cu nanoparticles and Cu+ species is presented, to overcome the "assumed" low activity of small copper particles that prevents obtaining high atom efficiency and competitive catalytic results in the CO2 hydrogenation to methanol. A detailed spectroscopic study (combined with theoretical calculations and catalytic tests) performed on a Cu-Mg-Al mixed oxide catalyst derived from a hydrotalcite precursor by calcination and further reduction (CuHT-230) highlights the key role of doped Cu+ ions in methanol production. The success of CCU technologies in the medium-long term will depend not only on the development of competitive catalysts but also on their ability to operate under milder reaction conditions, which will make these processes economically viable. Consequently, the energy efficiency issue will be addressed in Chapter 5 with the innovative design of a core-shell structure formed by a core of metallic ruthenium and a shell of ruthenium carbide, synthesized via hydrothermal treatment. This catalyst (Ru@EDTA-20) exhibits exceptional high activity for CO2 hydrogenation to methane (Sabatier reaction) at low temperatures (160-200 °C) with 100% selectivity to CH4, outperforming the state of the art catalysts operating at 400-500 °C. Finally, Chapter 6 covers the investigation carried out on a model ruthenium-based catalyst composed of a 2D-bilayered aluminosilicate grown over a Ru(0001) surface during my international short-term stay at Brookhaven National Laboratory (New York, USA). The combination of these materials in a composite allows the creation of a confined nano-space that can be exploited as a nano-reactor. In this project, water formation reaction (WFR) was selected as model reaction, which was fundamentally explored at NSLS-II synchrotron. / Cored Bandrés, J. (2022). Innovative Design of Heterogeneous Catalysts with Improved CO2 Hydrogenation Performance [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/182403 / Compendio