Le mélange à quatre ondes est un effet non linéaire sensible à la phase qui suscite de nombreux intérêts dans le domaine de la génération de peignes de fréquences et du traitement tout optique du signal par exemple. Un peigne de fréquences peut en effet s'obtenir par effet de mélange à quatre ondes 1en cascade. Dans ce cas, un nombre N d'ondes interagissent entre elles via l'effet Kerr et la modélisation d'un tel processus doit tenir compte de tous les couplages possibles entre les ondes. Au cours de mes travaux de thèse, je me suis intéressé, dans un premier temps, à la modélisation du mélange à quatre ondes dit multiple pour lequel un nombre quelconque N d'ondes interagissent entre elles. J'ai proposé une formulation générale permettant d'identifier simplement tous les termes de mélange à quatre ondes issus de toutes les combinaisons possibles de couplage entre les ondes et leur désaccord de phase associé. J'ai validé cette approche en proposant une étude théorique et expérimentale d'un processus de mélange à quatre ondes multiple dans une fibre optique non linéaire. Dans une deuxième partie, j'ai proposé, grâce au modèle élaboré précédemment, une étude théorique du phénomène de conversion de fréquence sensible à la phase, permettant la décomposition des composantes en quadrature d'un signal optique. Dans la littérature, cette expérience fut démontrée initialement avec quatre ondes pompes et dans plusieurs types de composants non linéaires. J'ai pu démontrer, au cours de mes travaux, que trois pompes étaient suffisantes pour réaliser l'expérience et j'ai déterminé des relations analytiques simples permettant de choisir les paramètres expérimentaux (notamment l'amplitude et la phase des pompes) rendant possible la décomposition des composantes en quadrature d'un signal. J'ai validé cette étude par la démonstration expérimentale d'un convertisseur de fréquence sensible à la phase avec uniquement trois pompes et j'ai étudié théoriquement les effets de la dispersion chromatique sur les performances du convertisseur de fréquence. Enfin, dans une dernière partie, j'ai caractérisé des fibres optiques microstructurées en verre de chalcogénure fabriquées dans le cadre d'une collaboration avec Perfos, l'Institut des Sciences Chimiques de Rennes et SelenOptics. Dans ce cadre, j'ai mis en place un banc de mesure de la dispersion chromatique et du coefficient non linéaire des fibres optiques basé sur le mélange à quatre ondes. / Four-wave mixing is a phase-sensitive nonlinear effect that arouses interest, particularly in the fields of frequency comb generation and all-optical signal processing. As an example, frequency combs can be produced thanks to a cascaded four-wave mixing process. In this case, N waves can interact with each other through the optical Kerr effect, and one has to take into account all the possible interactions to be able to adequately model the process. During my PhD thesis, I was interested in modeling the so-called multiple four-wave mixing process, in which any number N of waves can interact with each other. I proposed a general formulation that allows to easily identify all the four-wave mixing terms originating from all the possible combinations of wave coupling and their associated phase-mismatch terms. I validated this approach through the theoretical and experimental study of a multiple four-wave mixing process in a nonlinear optical fiber. Thanks to the developed model, I then proposed a theoretical study of the phase-sensitive frequency conversion process, which permits to demultiplex the quadrature components of an optical signal. In the literature, this process was first experimentally demonstrated in several nonlinear devices using four pump waves. I demonstrated that only three pump waves were required to successfully perform the experiment, and I determined the simple analytical relations from which the adequate experimental parameters (namely, the amplitudes and phases of the pump waves) could be deduced. I finally validated this study by experimentally demonstrating a phase-sensitive frequency conversion process with only three pump waves, and I theoretically studied the influence of chromatic dispersion on the performance of this frequency converter. Finally, I characterized some chalcogenide microstructured optical fibers that were fabricated in the framework of a collaboration with Perfos, the Institut des Sciences Chimiques de Rennes, and SelenOptics. I set up a test bench based on the four-wave mixing process in order to measure the chromatic dispersion and nonlinear coefficient of some optical fibers.

Les fibres optiques utilisées pour le transfert d’information présentent des pertes de signal pendant leur propagation. Ainsi, ces signaux ont besoin d’être régulièrement amplifiés. De nos jours, l’Amplification Raman, basée sur le principe de diffusion Raman stimulée, est une des techniques utilisées pour réaliser ces amplifications. Les nanoparticules de métaux nobles ont des propriétés optiques uniques provenant de l’oscillation collective des électrons lorsqu’elles interagissent avec une onde électromagnétique. Ces particules absorbent fortement le champ électromagnétique à une fréquence appelée fréquence de résonance de plasmon de surface. Ce travail de thèse concerne l’influence des nanoparticules métalliques sur l’amélioration de l’Amplification Raman. Il s’inscrit dans le cadre du projet ANR Fenoptic (2010-2012), réunissant l’entreprise Draka et plusieurs laboratoires français (ICB Dijon, CMCP Paris, LPCML Lyon), qui s’intéressent à l’intégration des nanoparticules de métaux nobles à l’intérieur des fibres optiques afin d’utiliser la résonance de plasmon de surface pour améliorer l’efficacité des amplificateurs optiques. Dans ce travail, différentes sources de nanoparticules métalliques ont été examinées (suspensions, couches, préformes de fibre optique). Les expériences ont porté sur la caractérisation (forme et position du plasmon) de nanoparticules de métaux nobles incluses en matrices vitreuses ainsi que sur des mesures de spectroscopie Raman au travers desquelles le phénomène de Diffusion Raman Exaltée de Surface (SERS) a particulièrement été étudié. Pour la première fois, nous avons mis en évidence l’exaltation du signal Raman d’une matrice vitreuse. / Signals in optical fibers used for the transfer of information are attenuated due to impurities, scattering, absorption… To compensate for these losses, several techniques were developed like Erbium Doped Fiber Amplifier (EDFA). An alternative to rare earth doped fiber amplifier is Raman Amplification, which results from stimulated Raman scattering. Noble metal nanoparticles have optical properties induced by the collective oscillation of their conduction electrons when they interact with an electromagnetic wave. These particles strongly absorb the electromagnetic field at a frequency called surface Plasmon resonance frequency. This work is mainly based on effects leading to the improvement of the Raman Amplification. The ANR project Fenoptic (2010-2012), gathering Draka and several French laboratories (ICB (Dijon), CMCP (Paris), LPCML (Lyon)) is interested in the integration of noble metal nanoparticles in optical fibers using properties of the surface Plasmon resonance to improve the efficiency of optical amplifiers. In this work, different kinds of samples (suspensions, layers, optical fiber performs) with metal nanoparticles were studied. The experiments were based on the characterization (form and position of the Plasmon band) of noble metal nanoparticles in amorphous matrix and Raman spectroscopy was used to study the Surface Enhanced Raman Spectroscopy (SERS) effect. For the first time, we found the Raman signal exaltation of an amorphous matrix.

Pour un grand nombre d'applications, les sources laser impulsionnelles femtoseconde (fs) doivent fournir des puissances toujours plus importantes. En régime impulsionnel, on recherche d'une part une forte puissance crête par impulsion, et d'autre part une forte puissance moyenne, c'est à dire un taux de répétition élevé. Parmi les technologies existantes, les amplificateurs à fibre optique dopée ytterbium présentent de nombreux avantages pour l'obtention de fortes puissances moyennes, cependant le fort confinement des faisceaux dans la fibre sur de grandes longueurs d'interaction induit inévitablement des effets non-linéaires, et limite ainsi la puissance crête accessible. Nous avons étudié lors de cette thèse la combinaison cohérente d'impulsions fs appliquée aux systèmes fibrés.Ayant déjà fait ses preuves dans les régimes d'amplification continu et nanoseconde, la combinaison cohérente de faisceaux (dite combinaison spatiale) permet de diviser une seule et unique source en N voies indépendantes, disposées en parallèle et incluant chacune un amplificateur. Les faisceaux amplifiés sont ensuite recombinés en espace libre en un seul et unique faisceau, qui contient toute la puissance des N amplificateurs sans accumuler les effets non-linéaires. Cette architecture permet théoriquement de monter d'un facteur N le niveau de puissance crête issu des systèmes d'amplification fibrés. Au cours de cette thèse, nous avons démontré la compatibilité et l'efficacité de cette méthode en régime d'amplification fs avec deux amplificateurs, selon différents procédés. Les expériences démontrent d'excellentes efficacités de combinaison ainsi qu'une très bonne préservation des caractéristiques temporelles et spatiales initiales de la source. Les procédés de combinaison cohérente nécessitent cependant un accord de phase entre différents amplificateurs stable dans le temps, assuré en premier lieu par une boucle de rétroaction. Nous avons poursuivi notre étude en concevant une architecture totalement passive, permettant une implémentation plus simple d'un système de combinaison à deux faisceaux sans asservissement électronique. Enfin, une méthode passive de combinaison cohérente dans le domaine temporel est étudiée et caractérisée dans le domaine fs, et implémentée simultanément avec la méthode passive de combinaison spatiale proposée précédemment. Ces expériences démontrent la validité et la variété des concepts proposés, ainsi que leurs nombreuses perspectives pour les systèmes d'amplification fs fibrés. / Applications addressed by femtosecond (fs) laser sources are requiring increasing pulse energies and increasing average powers. Ytterbium-doped fiber amplifiers are excellent candidates to generate high average powers at high repetition rates, but present strong disadvantages in terms of peak power. Indeed, the tight confinement of the beam over long interaction length induces nonlinear effects at high peak-powers that affect the overall performances of fiber systems. This work describes coherent combining methods that can be used to scale the performances of femtosecond laser sources.Coherent beam combining has been widely used in CW regime and more recently in the nanosecond range. It consists in splitting a single seed into N beam replicas, amplified each by independent amplifiers in parallel. Their respective outputs are combined in free space into one single beam that carries the power of the N amplifiers without cumulating nonlinearities. This architecture allows scaling both peak and average powers of the amplification systems. We have studied and demonstrated the efficiency of active coherent beam combining in the fs regime with two fiber amplifiers, which are peak-power limited. The experiments show the preservation of the temporal/spectral/spatial properties of the combined pulses, with high combination efficiencies.Coherent beam combining methods require phase-matching between all the beams to combine. This is usually achieved by an active feedback loop on each amplifier along with a phase detection scheme. We demonstrate that a Sagnac interferometer can be used to ensure perfect and stable phase-matching over time, which considerably simplifies the setup. Finally, another passive combining method known as divided-pulse amplification, acting in the temporal domain, is studied and demonstrated in the fs regime. It is coupled with the passive spatial combining method described above to scale the number of pulse divisions. All these experiments show the compatibility of coherent combining concepts in the fs regime and provide new opportunities for fiber amplifier systems.

La plupart des objets quantiques individuels développés jusqu’à aujourd’hui ne permettent pas de satisfaire toutes les conditions nécessaires pour la construction d’un simulateur quantique. Une possibilité pour obtenir un système quantique robuste est de combiner plusieurs de ces approches. Dans cette thèse, nous décrivons les résultats obtenus sur deux systèmes expérimentaux développés dans ce but.La première partie de cette thèse décrit un système hybride d’atomes neutres couplés à des qubits supraconducteurs, en construction à l’Université du Maryland. La solution envisagée pour placer un ensemble d’atomes froids à proximité de la surface supraconductrice est de piéger les atomes dans le champ évanescent se propageant autour d’une fibre optique nanométrique. Nous avons développé un dispositif permettant la production de fibres optiques nanométriques de transmission optique supérieure à 99.95% dans le mode fondamental. Nous avons également optimisé la transmission de quelques modes d’ordres supérieurs, ce qui pourra s’avérer utile pour le piégeage d’atomes.La seconde partie de cette thèse décrit un système développé à l’Institut d’Optique et comprenant des atomes neutres piégés dans des matrices de pinces optiques. Dans ce cas, nous excitons les atomes dans des états de Rydberg afin de bénéficier de fortes interactions interatomiques. Nous avons caractérisé les interactions de van der Waals et les interactions résonantes entre deux atomes individuels, et démontré le caractère cohérent de l’interaction dipolaire. Nous avons enfin simulé la dynamique d’une chaine élémentaire de spins dans une matrice de trois atomes / Most platforms that are being developed to build quantum simulators do not satisfy simultaneously all the requirements necessary to implement useful quantum tasks. Robust systems can be constructed by combining the strengths of multiple approaches while hopefully compensating for their weaknesses. This thesis reports on the progress made on two different setups that are being developed toward this goal.The first part of this thesis focuses on a hybrid system of neutral atoms coupled to superconducting qubits that is under construction at the University of Maryland. Sub-wavelength diameter optical fibers allow confining an ensemble of cold atoms in the evanescent field surrounding the fiber, which makes them ideal for placing atoms near a superconducting surface. We have developed a tapered fiber fabrication apparatus, and measured an optical transmission in excess of 99.95% for the fundamental mode. We have also optimized tapered fibers that can support higher-order optical modes with high transmission, which may be useful for various optical potential geometries.The second part of this thesis focuses on a system of neutral atoms trapped in arrays of optical tweezers that has been developed at the Institut d’Optique. Placing the atoms in highly excited Rydberg states allows us to obtain strong interatomic interactions. Using two individual atoms, we have characterized the pairwise interactions in the van der Waals and resonant dipole-dipole interaction regimes, providing a direct observation of the coherent nature of the interaction. In a three-atom system, we have finally simulated the dynamics of an elementary spin chain

Les fibres dopées aux terres rares (REDFs) représentent un composant clef dans la fabrication de sources laser et d’amplificateurs optiques (REDFAs). Leurs hautes performances rendent cette technologie particulièrement attractive pour les applications spatiales en tant que partie active des gyroscopes à fibres optiques, pour le transfert de données et les applications LIDARS. Cependant, la grande sensibilité de ces fibres actives limite l’intégration des REDFAs au sein des missions spatiales. De nombreuses études ont été menées pour dépasser ces limitations et différentes techniques de mitigation ont été identifiées telles que le co-dopage au Cérium ou le chargement en hydrogène de ces fibres optiques. Toutes ces solutions interviennent au niveau du composant sensible et sont classées parmi les stratégies de durcissement par composant permettant la fabrication de fibres dopées aux terres rares résistantes aux radiations adaptées aux besoins des missions spatiales actuelles associées à de faibles doses d’irradiation. Cependant, l’avènement de nouveaux programmes, de nouvelles missions invitent à considérer des doses d’irradiation plus importantes, nécessitant des REDFs et des RDFAs encore plus tolérants aux radiations. A cette fin, une optimisation de l’amplificateur optique au niveau système est étudiée dans le cadre de ce doctorat en exploitant une approche couplant simulation et expériences dont les avancées pourront venir en appui des techniques de durcissement plus conventionnelles. Après la présentation du contexte, des objectifs de ce travail (Chapitre I), les mécanismes fondamentaux de l’amplification et des effets des radiations sont brièvement décrits dans le Chapitre II. Les outils de simulation basés sur l’enrichissement d’un code à l’état de l’art et ses nouvelles fonctionnalités, décrites au Chapitre III, permettent non seulement l’évaluation des performances optiques du REDFA mais aussi de prédire leurs évolutions sous irradiation. De nombreuses études expérimentales ont été réalisées sur différents REDFAs développés durant la thèse et présentés dans le chapitre IV, leurs résultats comparés à ceux issus de la simulation afin de valider nos outils de simulation. Une fois validé, le code a été utilisé pour montrer comment l’optimisation de l’architecture du REDFA permet de mitiger les effets des radiations sur ses performances (Chapitre V). Finalement, le Chapitre VI présente l’étude de l’implémentation dans le code de nouveaux effets, tels que les effets thermiques, le multiplexage du signal d’entrée à travers un couplage théorie/expérience / Rare earth doped fibers (REDFs) are a key component in optical laser sources and amplifiers (REDFAs). Their high performances render them very attractive for space applications as the active part of gyroscopes, high data transfer links and LIDARs. However, the high sensitivity of these active fibers to space radiations limits the REDFA integration in actual and future missions. To overcome these issues various studies were carried out and some mitigation techniques were identified such as the Cerium co-doping or the hydrogen loading of the REDFs. All these solutions occur at the component level and are classified as a hardening by component strategy allowing the manufacturing of radiation hardened REDFAs with adapted performances for low doses space mission. However, with the new space research programs, more challenging space missions are targeted with higher radiations doses requiring even more tolerant REDFs and REDFAs. To this aim, an optimization of the REDFA at the system level is investigated in this PhD thesis exploiting an approach coupling simulations and experiments offering the opportunity to benefit from the outputs of this hardening by system strategy in addition to other state-of-the-art approaches. After presenting the context, objectives of this work, the basic mechanisms about amplification and radiation effects as well as the architectures of REDFAs are described in chapters I and II. After that, we update a state of art REDFAs simulation code described in Chapter III, to consider not only the REDFA optical performances but also their evolutions when exposed to radiations. Several experiments on dedicated home-made REDFA have been performed using accelerated irradiation tests (Chapter IV) and the comparison between these data and those obtained through the new code validated the simulation tools. Thereafter, we exploit the validated code to highlight how the optimization of the REDFA architecture can participate to the mitigation of the radiation effects on the amplifier performances (Chapter V). Finally, in chapter VI the implementation in the code of several other effects, such as thermal effects, input signal multiplexing was investigated both from experimental and calculation point of views

In this thesis, we explore the four aspects of fiber Bragg grating sensors: mathematical modeling of Fiber Bragg Grating response/spectral characteristics, fabrication using phase mask, application and interrogation. Applications of fiber Bragg gratings, also known as in-fiber gratings, with emphasis on their sensing capabilities, interrogation of an array of sensors and their performance in structural health monitoring scenario are documented. First, we study the process of photosensitivity phenomenon in glasses, in particular GeO2:SiO2 glasses. For mathematical modeling we consider the 1-D refractive index profile along the propagation axis of an optical fiber drawn from the preform of such glasses. These 1-D index structures exhibit a bandgap for propagation along the fiber axis. We show how the bandgap is dependent on the two structural parameters: index periodicity and effective refractive index. The mathematical model provides the characteristics of three sensor parameters -resonance wavelength also known as the Bragg wavelength (λB ), filter bandwidth (ΔλB ), and reflectivity (R). We show that the evolution of the index structure in germanosilicate glasses is dependent on the inscription parameters such as exposure time, intensity of the laser used for inscribing, the interference pattern, and coherence of the laser system. In particular, a phase mask is used as the diffffacting element to generate the required interference pattern, that is exposed on the photosensitive fiber. We present a mathematical model of the electromagnetic diffraction pattern behind the phase mask and study the effect of the limited coherence of the writing laser on the interference pattern produced by the diffracting beams from the mask. Next, we demostrate the sensing capabilities of the fiber Bragg gratings for measuring strain, temperature and magnetic fields. We report linearity of 99.7% and sensitivity of 10.35pm/◦C for the grating temperature sensor. An array of gratings assigned with non-overlapping spectral windows is inscribed in a single fiber and applied for distributed sensing of structural health monitoring of an aircraft’s composite air-brake panel. The performance of these sensors is compared with the industry standard resistance foil gauges. We report good agreement between the two gauges (FBG and RSG). In some applications it is more desirable to know the spectral content, rather than the magnitude of perturbation. Fiber Bragg gratings sensors can be used to track events that occur in a very small span of time and contain high frequencies. Such applications demand very high speed wavelength demodulation methods. We present two interrogation techniques: wavelength-shift time-stamping (WSTS) and reflectivity division multiplexing (RDM). WSTS interrogation method employs the multiple threshold-crossing technique to quantize the sensor grating fluctuations and in the process produces the time stamps at every level-cross. The time-stamps are assembled and with the a priori knowledge of the threshold levels, the strain signal is reconstructed. The RDM methodology is an extension of the WSTS model to address multiple sensors. We show that by assigning unique reflectivities to each of the sensors in an array, the time-stamps from each of the sensors can be tagged. The time-stamps are collected by virtue of their corresponding pulse heights, and assembled to reconstruct the strain signal of each of the array sensor. We demonstrate that the two interrogation techniques are self-referencing systems, i.e., the speed at which the signals are reconstructed is instantaneous or as fast as the signal itself.

The objective of this thesis is to study of optical effects, arising in the form of non-uniform waveguide structure, complicated refractive index profiles or due to pulse propagation in dense wavelength division multiplexing (DWDM) optical communication systems. These effects are important and critically influence the performance of DWDM optical systems. A comprehensive survey of current literature on optical effects due to nonuniform optical structure and nonlinear optical effects is first done, showing their advantages and disadvantage in optical communication systems. A survey on methods of optical waveguide analysis is also done. The main contribution has been made to three main aspects of the problem : Accurate analysis of uniform/non-uniform optical waveguides with arbitary refractive index profiles Pulse propagation and distortion in DWDM Raman amplification systems. Use of non-uniform FBG to compensate for pulse distortion We study several existing analytical techniques developed so far for analyzing the mode of non-uniform optical waveguide structures. Later, we verify the analytical results by finite element method (FEM). The convergence study is also carried out. A new computational technique is proposed modifying the finite element method to analyze complex refractive index profiles required for the analysis, namely single mode step index profile, multi clad fiber, W -profile, chirp profile etc. An accuracy of 10−4 in the calculation of propagation constant/eigen-value is demonstrated. Dispersion characteristics of optical fibers w.r.t. different profile parameters is evaluated. A modification to scalar BPM is proposed and applied to study the effects of inhomogeneities along the propagation direction. The applicability and accuracy of the method is tested using integrated optic waveguide devices, namely, graded index slab waveguide. The proposed BPM uses Fourier decomposition of the transverse field. Coupled mode theory (CMT) of optical waveguides in non-homogeneous optical medium is applied to study the interaction of lightwaves propagation together such as in a DWDM system. The BPM results is verified by CMT. The inhomogeneous waveguide theory is extended to study pulse propagation in DWDM optical communication system. Nonlinear optical effects are an important aspects of DWDM systems with fiber Raman amplifier. Finite difference time domain (FDTD) method is necessary to study these nonlinear optical effects as other conventional methods are not suitable here. Here, we discuss DWDM optical communication systems due to nonlinearity in the form of SRS effect. In case of FRA, we study the various kinds of fiber profile design parameters, for the purpose to achieve and extend the flat gain bandwidth over the EDFA window. We also propose and study, a new bi-directional optical fiber transmission scheme with various constraints, using Raman amplification process with and without pump depletion. Our scheme, provides an advantage like high SNR, low pump induced noise, for long-haul communication link. We find that, there is a quite significant crosstalk and power coupling among the dense DWDM channels but earlier discussed BPM fails to account for possible interference effects among the channels. To reduce the harmful nonlinear optical effects like four wave mixing (FWM), we need to deploy a high chromatic dispersion fiber, which will ultimately lead to high pulse walk-off rate among the DWDM channels; hence for high bit rate long haul systems, walk-off effect can not be ignored. Application of FDTD provided an improved insight into the effect of GVD on stimulated Raman scattering crosstalk than different modulation techniques and line codes. It is shown through analysis that pulse walk-off phenomena may distort the data asymmetrically; especially for case of wide-band DWDM transmission system. Hence, the pulse walk-off effect should be considered in future systems containing optical amplifier. It is shown, that large walk-off rate may reduce the crosstalk among DWDM channels but tends to increase the asymmetric pulse distortion. Data may lose due to high walk-off effect. We also investigate channel addition/removal process in DWDM fiber Raman amplifier. We also demonstrate that the pulse walk-off effect tends to lead significantly to positive chirp for higher frequency channels. This feature can be exploited to overcome the chromatic dispersion effects in DWDM transmission systems. Pulse walk-off induced chirp, can be compensated by using the nonuniform fiber Bragg grating (NUFBG). The CMT due to periodic perturbation of the circular cylindrical waveguide structures is applied here. Here, we discuss the function of fiber Bragg grating as a transmission versus reflecting grating filter. We also discuss, FBG application to gain flattening of an EDFA window as well as how the group velocity dispersion (GVD) will be affected with bandwidth and coupling coefficient. We develop a new analytical technique to estimate the bandwidth of FBG based optical system. Finally, we investigate the dispersion compensation properties, pulse distortion, peak reflectivity analysis in uniform/non-uniform FBG due to an uniform/non-uniform incoming signal. More complicated refractive index profile can significantly reduce the GVD as well as side lobes intensity. Dispersion characteristic due to an arbitrary refractive index profile is discussed in details for the case of non-uniform FBG. Thus, we concluded that wide band DWDM optical communication system need to closely take into account various inhomogeneities and nonlinearities of optical fibers w.r.t. wave and pulse propagation.

The realisation of signal processing algorithms in fixed-point offers substantial performance advantages over floating-point realisations. However, it is widely acknowledged that the task of realising algorithms in fixed-point is a challenging one with limited tool support. This thesis examines various aspects related to the translation of algorithms, given in infinite precision or floating-point, into fixed-point. In particular, this thesis reports on the implementation of a given algorithm, an EDFA (Erbium-Doped Fibre Amplifier) control algorithm, on a FPGA (Field Programmable Gate Array) using fixed-point arithmetic. An analytical approach is proposed that allows the automated realisation of algorithms in fixedpoint. The technique provides fixed-point parameters for a given floating-point model that satisfies a precision constraint imposed on the primary output of the algorithm to be realised. The development of a simulation framework based on this analysis allows fixed-point designs to be generated in a shorter time frame. Albeit being limited to digital algorithms that can be represented as a data flow graph (DFG), the approach developed in the thesis allows for a speed up in the design and development cycle, reduces the possibility of error and eases the overall effort involved in the process. It is shown in this thesis that a fixed-point realisation of an EDFA control algorithm using this technique produces results that satisfy the given constraints.

Neste trabalho, é feita a análise dos modos de plasmon que se propagam em um filme metálico que cobre uma fibra óptica generalizada. Os modos de plasmon estudados são: Fuga pela Cobertura (lcv), Ligado Simétrico (Sb), Fuga pelo Núcleo (lcr) e Ligado Assimétrico (ab). Os filmes metálicos, para efeito de comparação, utilizados neste trabalho, são: a prata, o ouro e o paládio. Desenvolveu-se um modelo matemático do fenômeno eletromagnético e um software, que gerou um banco de dados que facilitasse a análise de estruturas, com diversas combinações de parâmetros. Com o banco de dados, foram obtidos diversos gráficos, que permitiram: analisar os modos de plasmon, verificar a atenuação das ondas e o comportamento do campo eletromagnético em cada região da estrutura. As confrontações entre as estruturas com filmes de: prata, ouro e paládio, permitiram concluir que aquelas elaboradas com os filmes de prata e de ouro são as que apresentam menores perdas, portanto, as recomendadas na confecção de sensores. Como a prata é mais acessível que o ouro, aconselha-se a sua utilização. A análise e os resultados deste trabalho são originais na literatura especializada. / In this work it is done the analysis of the ways of plasmon that developed themselves in a mettalic film that covers an optic and generalized fiber. The studied ways of plasmon are: Cover-Leaky (lcv), Symmetric Bounded (Sb), Core-Leaky (lcr) and Asymmetrical Bounded (ab). The metallic films, for reason of comparison, used in this work, are: the silver, the gold and the paladium. It was developed a mathematical model of the electricmagnetic phenomenon and a software, that created a database which could make it easy the analysis of structures with several combinations of parameters. With the database have been got several graphs that let: analyse the types of plasmon, see the reduction of waves and the behaviour of the electricmagnetic field in each area of the structure. The confrontations between the structures with films of silver, gold and paladium made it possible to conclude that those elaborated with films of silver and gold are those that present smaller losses, so, are recommended in the confection of sensors. As silver is more accecible than gold it is advisable its utilization. The analysis and the results of this work are original in the specialized literature.

CNPQ / O presente trabalho tem como objetivo o desenvolvimento de um biosensor, utilizando redes de Bragg em fibras óticas, capaz de mensurar deformações em tecido ósseo. Inicialmente foram realizados testes de esterilização e desinfecção com sensores, após o processo completo, os sensores foram testados quanto a sua sensibilidade. Com isso os métodos de esterilização e desinfecção autoclave, óxido etileno, hipoclorito de sódio, cloramina T e ácido peracético, foram eficazes para eliminação e ou inativação dos microrganismos, sem que haja alterações no comportamento das FBGs. Com isso definem-se métodos aplicáveis para possíveis estudos, onde fibras óticas foram implantadas em animais in vivo para estudos de comportamento metabólico com a presença de materiais inorgânicos. Na continuidade dos trabalhos foram realizados testes de compatibilidade de fibras óticas inseridas no tecido subcutâneo de ratos. Baseado na análise descritiva dos cortes histológicos pode-se concluir que as fibras ópticas sem revestimento e com revestimento foram biocompatíveis quando implantadas em subcutâneo de ratos. Sendo assim, foi possível contemplar o desenvolvimento de um sensor baseado em redes de Bragg em fibras óticas para implantação direta no tecido ósseo. Posteriormente foram realizados testes-piloto para o desenvolvimento da metodologia de construção e implante no desenvolvimento de biosensores. Com todo o trabalho feito até à data, o desenvolvimento e construção de um biosensor que foi implantado in vivo foi possível. O biossensor foi fixado na região mandibular de um bovino quatro meses de idade. Uma semana após a implantação, os animais receberam diferentes tipos de alimentos e foi monitorizada durante a ingestão de alimentos. Com as deformações medidas foi possível a análise dos diferentes padrões mastigatórios e diferentes magnitudes de força e frequência mastigatória que o animal desempenhada durante o processo de mastigação. / This study aims to develop a biosensor using Bragg gratings in optical fibers, capable of measuring deformation in bone tissue for this took a lot of work. Initially sterilization and disinfection with sensors tests were performed after the entire process, the sensors were tested for their sensitivity. In the same study methods of sterilization and disinfection have been tested to assess its efficiency. Thus methods of sterilization and disinfection autoclave, ethylene oxide, sodium hypochlorite, chloramine T and peracetic acid were effective for removing or inactivating microorganisms and, without changes in the behavior of the FBGs. With this set up methods applicable for possible studies, where optical fibers are implanted in in vivo animal studies metabolic behavior in the presence of inorganic materials. Continuing the work was carried out optical fiber compatibility tests inserted in the subcutaneous tissue of rats. Based on the descriptive analysis of histological sections can be concluded that the optical fiber uncoated and coated were biocompatible when implanted in rat subcutaneous tissue. Thus it is possible to contemplate the development of a sensor based on Bragg gratings in optical fibers for direct implantation into the bone tissue. Following on from the work were carried out pilot tests for development of construction methodology and implant in biosensor development. With all the work done to date, the development and construction of a biosensor that was implanted in vivo was possible. The biosensor was fixed in the mandibular region of a bull four months old. A week after implantation, the animal received different types of food and was monitored during the intake of foods. With the deformations measured parse the different masticatory patterns and different magnitudes of force and masticatory frequency that the animal developed during the chewing process completing the objectives of this study.