Les pinces optiques permettent de piéger et de manipuler des objets sans contact physique avec de la lumière et ce avec une extrême précision. Son caractère non-invasif et non-destructif en fait un outil idéal pour des applications dans des domaines tels que la biophysique et la médecine. La pince optique conventionnelle utilise un faisceau lumineux fortement focalisé par un objectif de microscope.La fibre optique est un composant très intéressant dans ce domaine puisqu'elle permet de guider la lumière et de piéger optiquement des objets sans l'utilisation de composants optiques encombrants et en limitant des étapes d'alignement. Elle donne ainsi une grande flexibilité et compacité aux pinces optiques.Dans ce contexte, l'objectif de cette thèse a été de développer une pince optique à deux fibres nano-structurées dans le but de piéger des particules de taille micro et nanométrique.Notre pince est constituée de deux fibres optiques gravées chimiquement en forme de pointe et positionnées en vis-à-vis à des distances typiques de 20 nm à 20 µm. Cette configuration à deux faisceaux contra-propagatifs permet d'annuler la pression de radiation de la lumière. Elle a l'avantage d'obtenir un piégeage efficace pour des intensités lumineuses relativement faibles. En outre, les faisceaux ne doivent pas nécessairement être fortement focalisés. Notre dispositif présente une grande souplesse grâce au contrôle in-situ de la position des fibres, l'injection de la lumière dans les fibres et la manipulation de particules individuelles sans aucun substrat.Au cours de ces travaux, nous avons démontré expérimentalement le piégeage stable et reproductible d'une ou plusieurs particules en suspension. Divers types de particules diélectriques ont été piégées, allant de la particule en polystyrène d'un micromètre à des particules luminescentes de YAG:Ce mesurant 60 nm de diamètre. Ces dernières ont été élaborées et optimisées spécifiquement pour le piégeage optique lors de ces travaux.Nous avons également mesuré les forces optiques appliquées aux particules piégées en analysant leur mouvement Brownien résiduel. Nous avons démontré que le potentiel de piégeage était harmonique, nous permettant de définir la constante de raideur optique.Enfin nous avons démontré qu'en modifiant la forme du faisceau optique d'émission, il était possible d'améliorer certaines caractéristiques de la pince. D'une part, les faisceaux quasi-Bessel qui sont très peu divergents nous ont permis de réaliser un piégeage stable et efficace à grande distance.D'autre part, l'utilisation de pointes métallisées permet de confiner le champ et d'améliorer les forces optiques tout en diminuant l'intensité lumineuse. Nous avons mis en évidence le couplage en champ proche entre deux pointes métallisées qui ont été spécialement élaborées pour la pince. Ces derniers résultats ouvrent des perspectives encourageantes pour le développement d'une pince plasmonique fonctionnant en champ proche qui est particulièrement bien adaptée pour le piégeage de nanoparticules. / Optical tweezers allow to trap and manipulate objects without any mechanical contact with light and with an extreme accuracy. This non-invasive and non-destructive technique is of large interest in many scientific domains such as biophysics and medicine. Conventional optical tweezers use a laser beam which is strongly focalised by a microscope objective.The use of optical fibers attracts increasing attention as highly flexible and compact tools for particle trapping. Fiber-based optical tweezers do not require bulky optics and require only little alignments.In this context, the objective of this thesis was to develop a dual fiber nano-tip optical tweezers in order to trap particles with micro and nano-meter sizes. Our tweezers consist of two chemically etched optical fiber tips placed in front of each other with typical gaps from 20~nm to 20~µm. This dual contra-propagative beams configuration allow to cancel light radiation pressure. Efficient trapping can thus be obtained at relative low light intensities. Moreover, strong focusing is not required. Our device present an high flexibility due to in situ optimization and control of the fibre positions and individual particle manipulation without any substrate.During our work, we experimentally demonstrated stable and reproducible trapping of one or several particles in suspension. Various dielectric particles were trapped, from one micrometer polystyrene beads to luminescent YAG:Ce particles with diameters down to 60~nm. During this thesis, the latter were specifically elaborated and optimized for the optical trapping. We also measured optical forces applied to trapped particles by analysing their residual Brownian motion. We showed the trapping potential is of harmonic shape, allowing to define its optical stiffness.vspace{10pt}Finally, by modifying the emitted optical beam shape, we were able to improve specific tweezers characteristics. On one hand, nondiffracting quasi-Bessel beams allow us to get a stable trapping at large fiber-to-fiber distances.On the other hand, the use of metallised fiber tips allows to improve the beam confinement and enhance optical forces while reducing light intensity. We proved the near-field coupling between two metallised tips which were especially elaborated in this work. Those last results open promising perspectives for the development of plasmonic tweezers working in the near-field, which are especially well adapted for nano-particles trapping.

Cette thèse présente la réalisation d’un piège optique dans une configuration originale, le piston optique, où le contrôle sur la phase de l’interférence d’un faisceau incident avec sa réflexion sur un miroir permet de réaliser différents types d’expériences. Nous avons d’abord étudié les propriétés thermodynamiques d’une compression progressive du piston qui fait passer la dynamique de la particule piégée d’une région de stabilité vers une région de bistabilité mécanique. Dans le contexte de la résonance stochastique où une force extérieure périodique est appliquée sur cette dynamique bistable, une approche exploitant le facteur de Mandel ainsi qu’une analyse des délais entre les transitions d’états métastables se révèle efficace pour interpréter nos mesures dans différents régimes de forçage. Nous montrons également comment des nanoparticules métalliques peuvent être piégées aisément dans un tel piston optique et nous exploitons notre configuration pour mesurer de faibles effets de forces optiques. Enfin, nous piégeons des nano-objets chiraux uniques et nous montrons comment la configuration de notre piston permet de réaliser des expériences de reconnaissance chirale par polarimétrie différentielle. / This thesis describes the experimental realization of an original optical trap, the optical piston, where controlling the phase of the interference of an incident beam with its reflection on a mirror allows achieving various experiments. We have first looked into the thermodynamics associated with a progressive compression of the piston leading the dynamics of a trapped particle from a region of stability to a region of mechanical bistability. In the context of stochastic resonance where a periodic external force is applied on this bistable dynamics, an approach exploiting the Mandel factor and a time-delay analysis on the hopping events between metastable states have proven efficient in interpreting the different results acquired in different regimes of drive. We have also shown how metallic nanoparticles can be trapped fairly easily in this kind of optical piston and we exploit our configuration to measure weak optical forces. Finally, we trap unique chiral nano-objects and we show how the configuration of our piston allows the realization of chiral recognition experiments by differential polarimetry.

Die vorliegende Forschungsarbeit widmet sich der Entwicklung und Untersuchung neuartiger photonischer Kristallstrukuren für Anwendungen in den Gebieten der Nanophotonik und Optofluidik. Dabei konzentriert sich eine erste Serie von Experimenten auf die Charakterisierung und Optimierung photonischer Kristallresonatoren im sichtbaren Spektralbereich, wobei bisher unerreichte Resonatorgüten von bis zu 3400 gezeigt werden können. Diese Strukturen werden anschließend als Plattformen zur Herstellung von hybriden nanophotonischen Bauelementen verwendet, indem externe Partikel (wie z.B. Diamant-Nanokristalle und Metall-Nanopartikel) in kontrollierter Art und Weise an die Resonatoren gekoppelt werden. Zu diesem Zweck wird eine Nanomanipulationsmethode entwickelt, welche Rastersonden zur gezielten Positionierung und Anordnung von Partikeln auf den photonischen Kristallstrukturen benutzt. Verschiedene Arten solcher Hybridelemente werden realisiert und untersucht, einschließlich diamant-gekoppelter Resonatoren, plasmon-gekoppelter Resonatoren und Metall-Diamant Hybridstrukturen. Außer für Anwendungen auf dem Gebiet der Nanophotonik werden verschiedene photonische Kristallstrukturen auch hinsichtlich ihres Leistungsvermögens als biochemische Sensorelemente erforscht. Zum ersten Mal wird eine umfassende numerische Analyse der optischen Kräfte auf Objekte im Nahfeld photonischer Kristallresonatoren durchgeführt, welche neue Möglichkeiten zum Einfang sowie zur Detektion und Untersuchung biologischer Partikel in integrierten optofluidischen Bauteilen bieten. Weiterhin werden unterschiedliche photonische Kristallfasern bezüglich ihrer Detektionssensitivität in Absorptions- und Fluoreszenzmessungen untersucht, wobei sich eine klare Überlegenheit von selektiv befüllten Hohlkern-Designs im Vergleich zu Festkern-Fasern offenbart. / This thesis deals with the development and investigation of novel photonic crystal structures for applications in nanophotonics and optofluidics. Thereby, a first series of experiments focuses on the characterization and optimization of photonic crystal cavities in the visible wavelength range, demonstrating unprecedented cavity quality factors of up to 3400. These structures are subsequently employed as platforms for the creation of advanced hybrid nanophotonic elements by coupling external particles (such as diamond nanocrystals and metal nanoparticles) to the cavities in a well-controlled manner. For this purpose, a nanomanipulation method is developed, utilizing scanning probes for the deterministic positioning and assembly of particles on the photonic crystal structures. Various types of such hybrid elements are realized and investigated, including diamond-coupled cavities, plasmon-coupled cavities, and metal-diamond hybrid structures. Apart from applications in nanophotonics, different types of photonic crystal structures are also studied with regard to their performance as biochemical sensing elements. For the first time a thorough numerical analysis of the optical forces exerted on objects in the near-field of photonic crystal cavities is conducted, providing novel means to trap, detect, and investigate biological particles in integrated optofluidic devices. Furthermore, various types of photonic crystal fibers are studied with regard to their detection sensitivity in absorption and fluorescence measurements, revealing a clear superiority of selectively infiltrated hollow-core designs in comparison to solid-core fibers.

No description available.

The purpose of this project is to explore the FBG (Fiber Bragg Grating) technology and create a force sensor. The result can be used as a basis for further projects.The project starts with force and strain measurements. The project then evolves to incorporate multiple FBG sensors. An uncommon method of writing the FBG withcoating is tested, which results in a FBG with most of the coating left.The result is a multi-FBG sensor. And even though the individual FBG is not linear the sum shows fantastic linearity with R-square of 0.99999. The change in wavelength is 1328pm/N. A common issue in the strain measurement is discussed and proof is provided. This shows that the reference value of the FBG is 1.12pm/μstrain instead of 1.21pm/μstrain. This is important if the FBG is mounted in a structure, because then the material proprieties will be dominating. Another result is that the peaks of Fabry Perot grating pair are linear but with different coecients.

Cette thèse constitue un ensemble de travaux et de réflexions sur la question de la modélisation d’expériences en nano-optique utilisant la méthode des différences finies dans le domaine fréquentiel (FDFD) et la méthode des différences finies dans le domaine temporel (FDTD). D’abord, un code FDFD bidimensionnel, dédié au calcul de modes propres de guides d’ondes optiques, a été mis en œuvre et testé à travers une comparaison avec des résultats publiés. Dans une deuxième grande partie, nous étudions le piégeage optique de petites particules (de taille microscopique) à l’aide d’une antenne à nano-ouverture papillon (BNA) gravée à l’extrémité d’une sonde de microscope optique métallisée. Le confinement de lumière obtenue à la résonance de la nano-antenne permet un piégeage 3-D des nanoparticules de latex. Une étude systématique a été menée pour quantifier la puissance de la lumière incidente nécessaire pour un piégeage stable. Un bon accord entre les résultats expérimentaux et numériques a été obtenu dans le cas d’une BNA opérant dans l’eau à _ = 1064 nm pour le piégeage de particules de latex de 250 nm de rayon. En outre, les résultats numériques pour de plus petites particules sont présentés et montrent qu’une telle configuration est capable de piéger des particules avec des rayons aussi petits que 30 nm. Troisièmement, nous avons étudié le processus de piégeage optique basé sur l’amélioration du confinement, non seulement du champ électrique comme dans le cas de la BNA, mais aussi du magnétique que peut exhiber l’antenne métallique type diabolo (DA). Cette dernière a été récemment proposée car elle présente une résonance avec un fort confinement magnétique. Nous avons amélioré le design afin qu’une double résonance, électrique et magnétique, ait lieu au centre de la nano-antenne. Ce double confinement a ensuite été exploité pour exalter le gradient de champ au voisinage de l’antenne et ainsi aboutir à de meilleures efficacités de piégeage (moindre puissance). De plus, les résultats des simulations montrent que le processus de piégeage dépend fortement des dimensions des particules et que, pour des géométries particulières, un piégeage sans contact peut être réalisé. Cette structure doublement résonnante ouvre la voie à la conception d’une nouvelle génération de nano-pinces optiques à forte efficacit / This thesis is a set of work and reflections on modeling the experiments in nano-optics by using the finite difference method in the frequency domain (FDFD), and in time domain (FDTD). First, a two-dimensional code FDFD, dedicated to the calculation the eigenmodes of optical waveguides, has been implemented and tested through a comparison with results found in the literature. In a second large part, we study the optical trapping of small particles (of microscopic size) by using a bowtie nanoaperture antenna (BNA) engraved at the end of a metal-coated near-field optical microscope tip. The confinement of light obtained at the resonance of the nano-antenna allows 3-D trapping of latex nanoparticles. A systematic study was conducted to quantify the power of incident light necessary for stable trapping. Good agreement between the experimental and numerical results was obtained in the case of a BNA operating in water at _ = 1064 nm for the trapping of latex particles having a radius of 250 nm-radius. In addition, numerical results for smaller particles are presented and show that such configuration is capable of trapping particles with radii reaching 30 nm. Third, we studied the optical trapping process based on improved confinement of the electric field as in the case of the BNA, but also of the magnetic field, by using a metallic diabolo shape antenna (DA). This latter has been recently proposed because it exhibits resonance with a strong magnetic field confinement. We have improved the design in such a way that a double resonance, electric and magnetic, takes place in the center of the nano-antenna. This dual confinement was then used in order to enhance the field gradient in its vicinity and thus obtain better efficiencies of the trapping (less power). In addition, the simulation results show that the trapping process is greatly dependent of the particles size, and also show that, for specificl geometries, a trapping without contact can be achieved. This doubly resonant structure opens the way to the conception of a new generation of optical nano-tweezers with high efficiency.

Orientador: Carlos Lenz Cesar / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin / Made available in DSpace on 2018-08-20T14:50:59Z (GMT). No. of bitstreams: 1 Marques_GustavoPires_M.pdf: 1771357 bytes, checksum: 8ee6919633e2615608f25b33bec98e96 (MD5) Previous issue date: 2005 / Resumo: O microscópio de força atômica é uma ferramenta que possibilita a medida de forças precisamente localizadas com resoluções no tempo, espaço e força jamais vistas. No coração deste instrumento está um sensor a base de uma viga (cantilever) que é responsável pelas características fundamentais do AFM. O objetivo desta pesquisa foi usar a deflexão deste cantilever para obter uma calibração rápida e precisa da força da armadilha da pinça óptica, assim como testar e comparar com os método tradicionalmente utilizados para este propósito. Para isso, foi necessário analisar e entender o condicionamento de sinais utilizados no AFM. Foram estudados cantilever tradicionais, cujo sistema de detecção é baseado na deflexão de um feixe laser em conjunto com fotodetectores, bem como cantilevers piezoresistivos. Cantilevers piezoresistivos fornecem uma alternativa simples e conveniente aos cantilevers ópticos. A integração de um elemento sensorial dentro do cantilever elimina a necessidade de um laser externo e de um detector utilizados na maioria dos AFMs. Isto elimina a etapa delicada de alinhamento da laser ao cantilever e fotodetector que normalmente precede uma medida com AFM, uma simplificação que expande o potencial do AFM para o uso em meios adversos, como câmaras de ultra alto vácuo ou, como no caso específico das Pinças Ópticas, onde existem esferas em solução líquida e também restrições de dimensão / Abstract: The atomic force microscope (AFM) is a tool that enables the measurement of precisely localized forces with unprecedented resolution in time, space and force. At the heart of this instrument is a cantilever probe that sets the fundamental features of the AFM. The objective of this research has been using the deflection of this cantilever to get a fast and accurate calibration of optical tweezers trap force, as well as testing and comparing to the traditionally used methods of calibration for this purpose. For that it was necessary to resolve and understand the sensors signals conditioning used in the AFM. Traditional cantilevers, whose detection system is based on the deflection of a laser beam in addition with a photodetector, as well as piezoresistive cantilevers has been studied. Piezoresistive cantilevers provide a simple and convenient alternative to optically detected cantilevers. Integration of a sensing element into the cantilever eliminates the need for the external laser and detector used in most AFMs. This removes the delicate step of aligning the laser to the cantilever and photodetector which usually precedes an AFM measurement, a simplification which expands the potential of the AFM for use in difficult environments such as ultrahigh vacuum chambers or, as in Optical Tweezers specific case, where there are spheres into a liquid solution as well as dimensional constraints / Mestrado / Física / Mestre em Física

In a time when microorganisms are controlling the world, research in biology is more relevant than ever and this requires some powerful instruments. Optical tweezers use a focused laser beam to manipulate and probe objects on the nano- and microscale. This allows for the exploration of a miniature world at the border between biology, chemistry and physics. New methods for biophysical and physicochemical measurements are continuously being developed and at Umeå University there is a need for a new system that combines several of these methods. This would truly be the new Swiss army knife of biophysical and biomechanical research, extending their reach in the world of optical tweezing. My ambition with this project is to design and construct a robust system that incorporates optical trapping with high-precision force measurements and Raman spectroscopy, as well as introducing the possibility of generating multiple traps by using a spatial light modulator (SLM). The proposed design incorporates four different lasers and a novel combination of signal detection techniques. To allow for precise control of the systems components and laser beams, I designed and constructed motorized opto-mechanical components. These are controlled by an in-house developed software that handles data processing and signal analysis, while also providing a user interface for the system. The components include, motorized beam blockers and optical attenuators, which were developed using commonly available 3D printing techniques and electronic controllers. By designing the system from scratch, I could eliminate the known weaknesses of conventional systems and allow for a modular design where components can be added easily. The system is divided into two parts, a laser breadboard and a main breadboard. The former contains all the equipment needed to generate and control the laser beams, which are then coupled through optical fibers to the latter. This contains the components needed to move the optical trap inside the sample chamber, while performing measurements and providing user feedback. Construction and testing was done for one sub-system at a time, while the lack of time required a postponement for the implementation of Raman and SLM. The system performance was verified through Allan variance stability tests and the results were compared with other optical tweezers setups. The results show that the system follows the thermal limit for averaging times (τ) up to ~1 s when disturbances had been eliminated, which is similar to other systems. However, we could also show a decrease in variance all the way to τ = 2000 s, which is exceptionally good and not found in conventional systems. The force-resolution was determined to be on the order of femtonewtons, which is also exceptionally good. Thus, I conclude that this optical tweezers setup could lie as a solid foundation for future development and research in biological science at Umeå University for years to come.

No description available.