By allowing to measure the magnetic field distribution inside a material, muon spin rotation experiments have the potential to provide valuable information about microscopic properties of high-temperature superconductors. Nevertheless, information about the intrinsic superconducting properties of the material is masked by random thermal and static fluctuations of the magnetic field which penetrates the material in the form of vortices of quantized magnetic flux. A good understanding of the fluctuations of those vortices is needed for the correct determination of intrinsic properties, notably the coherence length &xi;, and the field penetration depth &lambda;. We develop a simulation based on the Metropolis algorithm in order to understand the effect, on the magnetic field distribution, of disorder- and thermally-induced fluctuations of the vortex lattice inside a layered superconductor. <br /><br /> Our model correctly predicts the melting temperatures of the YBa₂Cu₃O_{6. 95} (YBCO) superconductor but largely underestimates the observed entropy jump. Also we failed to simulate the high field disordered phase, possibly because of a finite size limitation. In addition, we found our model unable to describe the first-order transition observed in the highly anisotropic Bi₂Sr₂CaCu₂O_8+<em>y</em>. <br /><br /> Our model predicts that for YBCO, the effect of thermal fluctuations on the field distribution is indistinguishable from a change in &xi;. It also confirms the usual assumption that the effect of static fluctuations at low temperature can be efficiently modeled by convolution of the field distribution with a Gaussian function. However the extraction of &xi; at low fields requires a very high resolution of the field distribution because of the low vortex density.

Photoacoustic tomography (PAT), as well as thermoacoustic tomography (TAT), utilize electromagnetic radiation in its visible, near infrared, microwave, and radiofrequency forms, respectively, to induce acoustic waves in biological tissues for imaging purposes. Combining the advantages of both the high image contrast that results from electromagnetic absorption and the high resolution of ultrasound imaging, these new imaging modalities could be the next successful imaging techniques in biomedical applications. Basic research on PAT and TAT, and the relevant physics, is presented in Chapter I. In Chapter II, we investigate the imaging mechanisms of TAT in terms of signal generation, propagation and detection. We present a theoretical analysis as well as simulations of such imaging characteristics as contrast and resolution, accompanied by experimental results from phantom and tissue samples. In Chapter III, we discuss the further application of TAT to the imaging of biological tissues. The microwave absorption difference in normal and cancerous breast tissues, as well as its influence on thermoacoustic wave generation and the resulting transducer response, is investigated over a wide range of electromagnetic frequencies and depths of tumor locations. In Chapter IV, we describe the mechanism of PAT and the algorithm used for image reconstruction. Because of the broad bandwidth of the laser-induced ultrasonic waves and the limited bandwidth of the single transducer, multiple ultrasonic transducers, each with a different central frequency, are employed for simultaneous detection. Chapter V further demonstrates PAT’s ability to image vascular structures in biological tissue based on blood’s strong light absorption capability. The photoacoustic images of rat brain tumors in this study clearly reveal the angiogenesis that is associated with tumors. In Chapter VI, we report on further developing PAT to image deeply embedded optical heterogeneity in biological tissues. The improved imaging ability is attributed to better penetration by NIR light, the use of the optical contrast agent ICG (indocyanine green) and a new detection scheme of a circular scanning configuration. Deep penetrating PAT, which is based on a tissue’s intrinsic contrast using laser light of 532 nm green light and 1.06 µm near infrared light, is also presented.

Cette thèse présente une étude expérimentale de l'interaction entre la supraconductivité et une onde de densité de charge (ODC). Dans la théorie standard, la température critique d’un matériau supraconducteur est favorisée principalement par deux paramètres : une grande densité d’états au niveau de Fermi (nF), et un fort couplage électron-phonon. Cependant, un fort couplage électron-phonon favorise aussi l’apparition d’une ODC, ce qui réduit nF et rivalise ainsi avec la supraconductivité.Notre démarche a consisté à étudier deux composés où supraconductivité et ODC coexistent, et dans lesquels on peut faire disparaître l’ODC grâce à un paramètre externe : pression ou substitution. Le premier composé, 2H-NbSe2, présente une ODC en dessous de 33 K à pression ambiante. Celle-ci coexiste avec la supraconductivité en dessous de 7 K. Sous pression, l’ODC disparaît au-dessus de 4.6 GPa, sans que la température critique varie notablement. L’ODC disparaît aussi en remplaçant le sélénium par du soufre : 2H-NbS2 est ainsi un supraconducteur sans ODC (Tc = 6 K), et peut donc servir de composé témoin pour une étude comparative. Dans le second composé, Lu5Ir4Si10, une ODC est présente en dessous de 77 K à pression ambiante. Celle-ci disparaît sous pression au-dessus de 2 GPa, tandis que la température critique saute simultanément de 4 à 9 K. Pour étudier ces composés, j’ai utilisé trois techniques expérimentales : la mesure de la dispersion des phonons à basse température (300-2 K) et sous pression (0-16 GPa) par diffusion inélastique des rayons X, la mesure de la dépendance en température de la longueur de pénétration magnétique grâce à un oscillateur à diode tunnel et la mesure des champs critiques via des microsondes Hall.Dans la première partie, je présente la dépendance en température de la dispersion des phonons dans 2H-NbS2. Nous observons la présence d’un phonon mou dont l’énergie reste toujours positive, même extrapolée à température nulle. Ce composé est ainsi à la limite d'une instabilité ODC. De plus, nous montrons qu’il est relativement unique, car seuls les effets anharmoniques empêchent l’amollissement complet des phonons. Je présente ensuite la dépendance en température et en pression de la dispersion des phonons dans 2H-NbSe2. Ces expériences montrent qu’un mode de phonon mou persiste jusqu’à 16 GPa, même quand l'état à température nulle n'est pas l’ODC. La dépendance en température de ce phonon mou est alors similaire à celle de 2H-NbS2. Dans les deux composés, ces phonons mous semblent liés à la présence d'un couplage électron-phonon à la fois fort et anisotrope. Nous suggérons qu’il s’agit d’un élément essentiel pour expliquer leurs propriétés supraconductrices.Dans la seconde partie, je mesure l'anisotropie et la dépendance en température de la longueur de pénétration magnétique dans l’état supraconducteur de 2H-NbS2 et Lu5Ir4Si10. La dépendance en température de la densité superfluide dans 2H-NbS2 confirme la présence d'un gap supraconducteur réduit dont l'amplitude est très proche de celle mesurée dans 2H-NbSe2. Les phonons mous et le gap réduit étant présents dans 2H-NbS2 et 2H-NbSe2, nous prouvons expérimentalement qu'il faut raisonner en termes de renforcement de la supraconductivité par les phonons mous plutôt qu'en termes d’interaction avec l'état fondamental (ODC ou métal). Nous proposons que ce renforcement soit lié à l'anisotropie du couplage électron-phonon.En revanche, cet effet n’est pas général aux composés où supraconductivité et ODC coexistent. Les propriétés supraconductrices de Lu5Ir4Si10 sont en effet bien décrites par le modèle BCS couplage faible. Ceci est peut être lié aux caractéristiques de l’ODC : la présence d’une hystérésis montre que la transition ODC est du premier ordre. D’autre part, les mesures de diffraction X sous pression et à basse température révèlent que cette ODC est multiple : en plus de la périodicité 1/7, nous observons une seconde périodicité de 1/20. / This thesis presents an experimental study of the interaction between superconductivity and a charge density wave (CDW). In the standard theory, the critical temperature of a superconductor is principally enhanced by two parameters: a large density of states at the Fermi level (nF) and a strong electron-phonon coupling. However, a strong electron-phonon coupling also favors the appearance of a CDW, which reduces nF and therefore competes with superconductivity.Our strategy was to study two compounds in which superconductivity and CDW coexist, and in which the CDW can be suppressed through an external parameter: pressure or substitution. The first compound is 2H-NbSe2, it presents a CDW below 33 K at ambient pressure. This CDW coexists with superconductivity below 7 K. Under pressure, the CDW disappears above 4.6 GPa, meanwhile the critical temperature slowly changes. The CDW also disappears when replacing selenium by sulfur: 2H-NbS2 is a superconductor without CDW (Tc=6 K), it can therefore serve as a “test compound” for a comparative study. The second compound is Lu5Ir4Si10, it presents a CDW below 77 K at ambient pressure. Under pressure, this CDW disappears above 2 GPa, meanwhile the critical temperature abruptly jumps from 4 to 9 K.For this study, I used three experimental techniques: inelastic x-ray scattering at low temperature (300-2 K) and under pressure (0-16 GPa) to measure the dispersion of phonons, a tunnel diode oscillator to measure the temperature dependence of the magnetic penetration depth, and Hall microprobes to measure the first and second critical fields. In the first part, I present the temperature dependence of the phonon dispersion in 2H-NbS2. We observe a soft phonon that always remains at positive energies, even extrapolated to zero temperature. Thus, this compound is on the verge of CDW instability. It is also relatively unique, since we show anharmonicity is the only effect that prevents the complete softening of the phonons.Then I present the temperature and pressure dependence of the phonon dispersion in 2H-NbSe2. These experiments show that a soft phonon persists up to 16 GPa, even if the ground state is not a CDW. The temperature dependence of this soft phonon is then similar to that of 2H-NbS2. In both compounds, these soft modes seem to be related to the strength and anisotropy of the electron-phonon coupling. We suggest this is a fundamental element to explain their superconducting properties.In the second part, I measure the anisotropy and temperature dependence of the magnetic penetration depth in the superconducting state of 2H-NbS2 and Lu5Ir4Si10. The temperature dependence of the superfluid density in 2H-NbS2 confirms the presence of a reduced superconducting gap. Its amplitude is very similar to the one measured in 2H-NbSe2. The soft modes and the reduced gap being present in both 2H-NbSe2 and 2H-NbS2, we prove experimentally that the enhancement of superconductivity is related to the soft modes rather than to the nature of the ground state (CDW or metal). We suggest this enhancement is due the anisotropy of the electron-phonon coupling.However, this effect is not general to all compounds where superconductivity and CDW coexist. The superconducting properties of Lu5Ir4Si10 are indeed well fitted by the BCS model in the weak coupling limit. This may be related to the characteristics of the CDW: the presence of hysteresis shows that the CDW transition is first order. In addition, under pressure and at low temperature, x-ray diffraction measurements indicate that the CDW is multiple: aside from the periodicity of 1/7, we observe a second periodicity of 1/20.

En este estudio se han construido dos diferentes instalaciones para investigar primero los chorros de gas horizontales y en segundo lugar los chorros verticales de agua que impactan sobre superficies libres de fluido, también se ha desarrollado un modelo numérico integral para predecir las trayectorias de estos jets y sus parámetros más importantes, validándose con los resultados experimentales obtenidos. En la primera parte de este trabajo, se han realizado experimentos para investigar el comportamiento de chorros de gas horizontales penetrando en agua. Los resultados experimentales indicaron que la longitud de penetración de los chorros de gas está fuertemente influenciada por el diámetro de la boquilla y el número de Froude, así como con el flujo de masa de de entrada y su momento. Aumentar el número de Froude y el diámetro del inyector lleva a aumentar la inestabilidad de jet. Además, la máxima ubicación antes de jet pinch-off se muestra que mantiene una relación logarítmica con el número de Froude para todos los diámetros de jet. Se han desarrollado correlaciones empíricas para predecir estos parámetros. Se ha desarrollado un modelo basado en la integración de las ecuaciones de conservación para que resulte útil en el diseño de aplicaciones en las que participen chorros horizontales así como para asistir a la investigación experimental. Las predicciones del modelo integral se comparan con los datos de los datos experimentales obtenidos con muy buenos resultados. En la segunda parte de este trabajo, se realizaron una serie de experimentos con de chorros de agua, inyectados verticalmente hacia abajo, a través de toberas circulares que impactan sobre una superficie de agua. Los resultados obtenidos mostraron que la profundidad de penetración de la burbuja disminuye con la longitud del chorro, pero que después de ciertas condiciones se mantiene casi constante. Además ésta aumenta con los diámetros de la boquilla y la velocidad del chorro. La velocidad de arrastre / Harby Mohamed Abd Alaal, K. (2012). Experimental and Theoretical Study of the Characteristics of Submerged Horizontal Gas Jets and Vertical Plunging Water Jets in Water Ambient [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/18065 / Palancia

No description available.

The betavoltaic battery is a type of micro nuclear battery that harvests beta emitting radioactive decay energy using semiconductors. The literature results suggest that a better model is needed to design a betavoltaic battery. This dissertation creates a comprehensive model that includes all of the important factors that impact betavoltaic battery output and efficiency. Recent advancements in micro electro mechanical systems (MEMS) necessitate an onboard miniaturized power source. As these devices are highly functional, longevity of the power source is also preferred. Betavoltaic batteries are a very promising power source that can fulfill these requirements. They can be miniaturized to the size of a human hair. On the other hand, miniaturization of chemical batteries is restricted by low energy density. That is why betavoltaics are a viable option as a power source for sophisticated MEMS devices. They can also be used for implantable medical devices such as pacemakers; for remote applications such as spacecraft, undersea exploration, polar regions, mountains; military equipment; for sensor networks for environmental monitoring; and for sensors embedded in bridges due to their high energy density and long lifetime (up to 100 years). A betavoltaic battery simulation model was developed using Monte Carlo particle transport codes such as MCNP and PENELOPE whereas many researchers used simple empirical equations. These particle transport codes consider the comprehensive physics theory for electron transport in materials. They are used to estimate the energy deposition and the penetration depth of beta particles in the semiconductors. A full energy spectrum was used in the model to take into account the actual radioactive decay energy of the beta particles. These results were compared to the traditional betavoltaic battery design method of estimating energy deposition and penetration depth using monoenergetic beta average energy. Significant differences in results were observed that have a major impact on betavoltaic battery design. Furthermore, the angular distribution of the beta particles was incorporated in the model in order to take into account the effect of isotropic emission of beta decay. The backscattering of beta particles and loss of energy with angular dependence were analyzed. Then, the drift-diffusion semiconductor model was applied in order to estimate the power outputs for the battery, whereas many researchers used the simple collection probability model neglecting many design parameters. The results showed that an optimum junction depth can maximize the power output. The short circuit current and open circuit voltage of the battery varied with the semiconductor junction depth, angular distribution, and different activities. However, the analysis showed that the analytical results overpredicted the experimental results when self-absorption was not considered. Therefore, the percentage of self-absorption and the source thickness were estimated using a radioisotope source model. It was then validated with the thickness calculated from the specific activity of the radioisotope. As a result, the battery model was improved significantly. Furthermore, different tritiated metal sources were analyzed and the beta fluxes were compared. The optimum source thicknesses were designed to increase the source efficiencies. Both narrow and wide band gap semiconductors for beryllium tritide were analyzed. / PHD

The present thesis is devoted to the investigation of novel superconductors by phase-sensitive terahertz transmission and infrared to ultraviolet spectroscopy. In particular, a nominally undoped Pr2CuO4 superconducting thin film, an FeTe0.5Se0.5 thin film, and a LiFeAs single crystal have been investigated. The emphasis is on the low-frequency part of the optical spectrum (i.e., the terahertz and infrared spectrum), as the goal of the study was to shed light on the size and symmetry of the superconducting gaps and also to determine the temperature dependences as well as the absolute values of the penetration depth, which are key input parameters for models applicable for new superconductors. In addition, niobium has been investigated as a reference, so as to see what is expected from conventional superconductors and to clarify the electrodynamics of niobium. A superconducting Nb thin film with Tc of 8.04 K has been investigated by backward wave oscillator-based (BWO-based) and time-domain terahertz (TDT) spectrometers in the frequency range between 4 and 100 cm−1 for temperatures ranging from 2 to 10 K. From these measurements an energy gap of 22.50 cm−1 = 2.79 meV = 4.02kBTc have been determined. The optical conductivity below Tc could nicely be described by calculations according to the Eliashberg theory, with the electron-phonon interaction evaluated from tunneling measurements. Absolute values of the penetration depth have been calculated from phase-sensitive terahertz measurements. The zero-temperature limit of at T = 0 is found to be 115 ± 5 nm. From this value, a London penetration depth of 43 ± 2 nm has been obtained. The overall temperature dependence of the penetration depth follows a behavior typical for conventional s-wave superconductors. A superconducting Pr2CuO4 film with T0 structure and Tc of 27 K has been investigated by use of optical methods in a wide frequency (5 – 55000 cm−1) and temperature (2 – 300 K) range. A Drude-like peak centered at zero frequency is observed in the optical conductivity below 150 K, above which it shifts to finite frequencies. The detailed analysis of the low-frequency conductivity reveals that the Drude peak and a far-infrared (FIR) peak centered at about 300 cm−1 persist at all temperatures. The FIR spectral weight is found to grow at the expense of the Drude spectral weight with increasing temperature. Absolute values of the penetration depth have been obtained from temperature and frequency-dependent measurements. The zero-temperature limit of is estimated to be 1600 ± 100 nm. The overall temperature dependence of follows a behaviour typical for cuprate superconductors. However, a closer look at the penetration depth at T 12 K reveals a flattening in the temperature dependence. A superconducting FeTe0.5Se0.5 thin film with Tc = 19 K has been investigated using a combination of BWO and TDT spectroscopy in the frequency range 4 - 80 cm−1 and between 3 and 150 K. From such measurements, a superconducting energy gap of 30 cm−1, representing a coupling strength = 2.27, is observed. Further, the penetration depth has been derived from the temperature dependence of the imaginary part of complex conductivity with the penetration depth = 530 ± 10 nm at lowest measured temperature. The temperature-dependent normalized superfluid density, just as is the case with most iron-based superconductors, could nicely be described by the so-called two-gap gamma model. Finally, a superconducting LiFeAs single crystal with Tc = 18 K has been investigated by optical spectroscopy in the frequency range 15 - 55000 cm−1 between 5 and 300 K. From these measurements, no clear signature of the superconducting energy-gap opening could be identified in spite of the spectral weight been suppressed in the infrared frequency regime below Tc. This indicates that LiFeAs single crystal is in a clean limit. With the aid of the Ferrell-Glover-Tinkham (FGT) sum rule, an absolute penetration depth of 215 nm has been calculated from the missing area at 5 K.

I arbetet görs en ansats att utveckla verktyg för dimensionering av skyddsåtgärder vid röjning av RSV-ammunition. Till skillnad mot övriga verkansformer så saknar ammunitionsröjaren idag beräkningsmodeller eller annat adekvat stöd för fastställande av maximalt riskområde respektive för dimensionering av skadebegränsande åtgärder vid röjning av ammunition innehållande riktad sprängverkan. Arbetets fokus utgår från den militära nyttan med ett sådant verktyg, då en anpassning till röjningsverksamhetens informationstillgång, tidsförhållanden, arbetsmetodik och tekniknivå är direkt avgörande för om ett verktyg kan anses ändamålsenligt eller ej. Resultatet utgörs av förslag på två kompletta verksamhetsanpassade verktyg. Det första i form av en beräkningsmodell för dimensionering av skadebegränsande åtgärder, vilken kombinerar RSV-strålens penetrationsförmåga med detonationsavståndets inverkan. Det andra verktyget är en enkel modell för bedömning av det maximala riskområde som en RSV-stråle kan ge upphov till, vilken baseras på det dimensionerande strålsegmentets ballistiska bana. / This thesis is an attempt to develop models for design of protective measures during clearance of shaped charge ammunition. Unlike for other hazards, the EOD personnel are lacking adequate means for the establishment of the maximum hazardous area and for the design of measures for hazard confinement against the shaped charge effect. The development of the models is based on the military utility, by consideration of the limited information availability, the short time frames, the working methods and the technology level that are characteristic for EOD operations. The result is a suggestion of two complete and adapted tools for the design of protective measures. The first tool is a model for the design of measures for hazard confinement, which combines the jet penetration depth with the influence of the stand-off distance. The second tool is a simple model for estimation of the maximum hazardous area generated by the shaped charge jet, which is based on the trajectory of the most critical jet segment.

Plus de vingt ans après la découverte de la supraconductivité à haute température critique, le mécanisme physique sous-jacente n'est pas encore bien cerné. En 2008, la découverte d'une nouvelle famille de supraconducteurs à haute température critique, les supraconducteurs à base de fer, a donné l'espoir de trouver une compréhension plus profonde des mécanismes de ce type de supraconductivité. Synthétiser des l'échantillons de grande qualité, la caractérisation des propriétés supraconductrices, l'étude des symétrices du gap et du paramètre d'ordre sont des étapes essentielles pour révéler le mécanisme. La connaissance précise du mécanisme permettra de profiter pleinement des propriétés remarquables de ces matériaux dans leurs applications industrielles si prometteuses. La thèse décrit d'abord la croissance de monocristaux de Ba$_{1-x}$K$_x$Fe$_2$As$_2$ et l'étude de leurs propriétés supraconductrices, menant vers la proposition d'une structure de gap du supraconducteur et d'un paramètre d'ordre pour les supraconducteurs à base de fer Ba-122 à partir de mesures de résistivité, de sondes à effect Hall, de spectroscopie d'Andreev en mode point-contact et de l'imagerie magnétique par la microscopie à nano-squid.Dans le chapitre 1, les événements historiques les plus marquants de la supraconductivité sont rappelés, les propriétés essentielles des supraconducteurs et le dévelopment des théories de la supraconductivité sont esquissés avant de présenter brièvement la découverte des supraconducteurs à base de fer et de donner un aperçu des questions actuelles de recherche dans ce domaine.Dans le chapitre 2, la procédure de croissance de monocristaux de Ba$_{1-x}$K$_x$Fe$_2$As$_2$ par la méthode de "self-flux", leur caractérisation par diffraction et par l'analyse de dispersion d'énergie des rayons X et la sensibilité des mesures de résistivité et de susceptibilité AC sont décrites. Puis nous présentons quelques résultats des mesures de la résistivité dépendante de la température de monocristaux du composé Ba$_{1-x}$K$_x$Fe$_2$As$_2$ (0,23 $\leq x \leq$ 0,4) sous champs magnétiques allant jusqu'à 9 T et dépendante de l'angle.Dans le chapitre 3, nous exposons quelques points essentiels du système de mesure à base de sonde de Hall que nous avons construit. Ensuite, nous présentons des mesures d'aimantation locale et globale sur des polycristaux de SmFeAsO$_{0.9}$F$_{0.1}$ synthétisés à haute pression, et de monocristaux de Ba$_{0.6}$K$_{0.4}$Fe$_2$As$_2$ effectuées par sonde de Hall et VSM.Dans le chapitre 4, nous donnons une brève introduction à la spectroscopie d'Andreev en mode point-contact, puis nous appliquons cette technique à des monocristaux de Ba$_{0.6}$K$_{0.4}$Fe$_2$As$_2$ et à une série de monocristaux de BaFe$_{2-x}$Ni$_x$As$_2$ couvrant une large gamme de dopage.Dans le chapitre 5, le développement d'un microscope de force à nano-SQUID et les mesures effectuées sur un film Rhénium d'épaisseur de 80 nm sont présentés. Le microscope peut acquérir des images topographiques et magnétiques simultanément. La plage de balayage maximale à 0.8 K est de \unit{70} {\micro\meter} $\times$ \unit{85}{\micro\meter} et sa résolution magnétique est d'environ $1,5 \times10^{-4}\Phi_0/\sqrt{\textrm{Hz}}$. Dans le chapitre 6, nous présentons quelques résultats des mesures de $\lambda$ par imagerie par microscopie de force à nano-squid sur des monocristaux de Ba(Fe$_{1-x}$Ni$_x$)$_2$As$_2$, couvrant tout le diagramme de phase. Sur les m\^{e}mes cristaux ont été effectuées des mesures du premier champ critique, de la variation de fréquence d'un oscillateur à diode tunnel et de la capacité calorifique.Enfin, au chapitre 7, un résumé détaillé et critique est présenté. / More than twenty years after the discovery of high temperature superconductors, the underlying physical mechanism is still not well understood. In 2008, the discovery of a new family of high temperature superconductors, the iron-based superconductors, provided us a new chance to understand the high temperature superconductivity. Synthesizing high quality sample, detecting the basic superconducting properties, the gap structure and order parameter symmetry are essential steps in revealing the mechanism and application of new superconductors. This dissertation describes the growth of Ba$_{1-x}$K$_x$Fe$_2$As$_2$ single crystals and the study of superconducting properties, gap structure and order parameter on Ba-122 iron-based superconductors with resistivity, Hall probe, point contact Andreev reflection spectroscopy and scanning nano-squid microscopy measurements. Some historical events concerning superconductivity are recalled, and some key properties and theories of superconductivity are presented in Chapter 1. Then we will briefly introduce the discovery and current research situation of the iron-based superconductors. In Chapter 2, the growth procedure of Ba$_{1-x}$K$_x$Fe$_2$As$_2$ single crystals with self-flux method, and the characterization of the crystals with diffraction and energy dispersive analysis of x-ray, AC susceptibility and resistivity measurements are described. Then we report some results from temperature dependent resistivity measurements on Ba$_{1-x}$K$_x$Fe$_2$As$_2$ (0.23 $\leq x \leq$ 0.4) single crystals in magnetic fields up to 9 T and angle dependent resistivity measurements on Ba$_{0.6}$K$_{0.4}$Fe$_2$As$_2$ single crystals. In Chapter 3, we introduce some details about a Hall probe measurement system we built. Then we present local and global magnetization measurements on high pressure SmFeAsO$_{0.9}$F$_{0.1}$ polycrystals and Ba$_{0.6}$K$_{0.4}$Fe$_2$As$_2$ single crystals with Hall probe and VSM.In Chapter 4, we give a brief introduction about point contact Andreev reflection spectroscopy, then we report the measurements on Ba$_{0.6}$K$_{0.4}$Fe$_2$As$_2$ single crystal and a series of electron-doped BaFe$_{2-x}$Ni$_x$As$_2$ single crystals over a wide doping range.In Chapter 5, the development of a scanning nano-SQUID force microscope and measurements performed on a 80 nm Rhenium film are presented. The microscope can take topographic and magnetic images simultaneously. The maximal scanning range is \unit{70}{\micro\meter} $\times$ \unit{85}{\micro\meter} and the magnetic resolution is about $1.5 \times10^{-4}\Phi_0/\sqrt{\textrm{Hz}}$. In Chapter 6, we present some results from lower critical field, tunnel diode oscillator, heat capacity and scanning nano-squid microscopy measurements on systematic doped Ba(Fe$_{1-x}$Ni$_x$)$_2$As$_2$ single crystals..Finally, in Chapter 7, a detailed summary is presented.

The present thesis is devoted to the investigation of novel superconductors by phase-sensitive terahertz transmission and infrared to ultraviolet spectroscopy. In particular, a nominally undoped Pr2CuO4 superconducting thin film, an FeTe0.5Se0.5 thin film, and a LiFeAs single crystal have been investigated. The emphasis is on the low-frequency part of the optical spectrum (i.e., the terahertz and infrared spectrum), as the goal of the study was to shed light on the size and symmetry of the superconducting gaps and also to determine the temperature dependences as well as the absolute values of the penetration depth, which are key input parameters for models applicable for new superconductors. In addition, niobium has been investigated as a reference, so as to see what is expected from conventional superconductors and to clarify the electrodynamics of niobium. A superconducting Nb thin film with Tc of 8.04 K has been investigated by backward wave oscillator-based (BWO-based) and time-domain terahertz (TDT) spectrometers in the frequency range between 4 and 100 cm−1 for temperatures ranging from 2 to 10 K. From these measurements an energy gap of 22.50 cm−1 = 2.79 meV = 4.02kBTc have been determined. The optical conductivity below Tc could nicely be described by calculations according to the Eliashberg theory, with the electron-phonon interaction evaluated from tunneling measurements. Absolute values of the penetration depth have been calculated from phase-sensitive terahertz measurements. The zero-temperature limit of at T = 0 is found to be 115 ± 5 nm. From this value, a London penetration depth of 43 ± 2 nm has been obtained. The overall temperature dependence of the penetration depth follows a behavior typical for conventional s-wave superconductors. A superconducting Pr2CuO4 film with T0 structure and Tc of 27 K has been investigated by use of optical methods in a wide frequency (5 – 55000 cm−1) and temperature (2 – 300 K) range. A Drude-like peak centered at zero frequency is observed in the optical conductivity below 150 K, above which it shifts to finite frequencies. The detailed analysis of the low-frequency conductivity reveals that the Drude peak and a far-infrared (FIR) peak centered at about 300 cm−1 persist at all temperatures. The FIR spectral weight is found to grow at the expense of the Drude spectral weight with increasing temperature. Absolute values of the penetration depth have been obtained from temperature and frequency-dependent measurements. The zero-temperature limit of is estimated to be 1600 ± 100 nm. The overall temperature dependence of follows a behaviour typical for cuprate superconductors. However, a closer look at the penetration depth at T 12 K reveals a flattening in the temperature dependence. A superconducting FeTe0.5Se0.5 thin film with Tc = 19 K has been investigated using a combination of BWO and TDT spectroscopy in the frequency range 4 - 80 cm−1 and between 3 and 150 K. From such measurements, a superconducting energy gap of 30 cm−1, representing a coupling strength = 2.27, is observed. Further, the penetration depth has been derived from the temperature dependence of the imaginary part of complex conductivity with the penetration depth = 530 ± 10 nm at lowest measured temperature. The temperature-dependent normalized superfluid density, just as is the case with most iron-based superconductors, could nicely be described by the so-called two-gap gamma model. Finally, a superconducting LiFeAs single crystal with Tc = 18 K has been investigated by optical spectroscopy in the frequency range 15 - 55000 cm−1 between 5 and 300 K. From these measurements, no clear signature of the superconducting energy-gap opening could be identified in spite of the spectral weight been suppressed in the infrared frequency regime below Tc. This indicates that LiFeAs single crystal is in a clean limit. With the aid of the Ferrell-Glover-Tinkham (FGT) sum rule, an absolute penetration depth of 215 nm has been calculated from the missing area at 5 K.