International Telemetering Conference Proceedings / October 30-November 02, 1995 / Riviera Hotel, Las Vegas, Nevada / The Remote Unit (RU) for a decentralised on-board base-band telemetry system is designed for use in launch vehicle missions of the Indian Space Research Organisation (ISRO). This new design is a highly improved and miniaturised version of an earlier design. The major design highlights are as follows. Usage of CMOS Field Programmable Gate Array (FPGA) technology in place of LS TTL devices, the ability to acquire various types of data like high level single ended or differential analog, bi-level events and two channels of high speed asynchronous serial data from On-Board Computers (OBCs), usage of HMC technology for the reduction of discrete parts etc. The entire system is realised on a single 6 layer MLB and is packaged on a stackable modular frame. This paper discusses the design approach, tools used, simulations carried out, implementation details and the results of detailed qualification tests done on the realised qualification model.

La maladie d'Alzheimer est caractérisée par la présence de dégénérescences neurofibrillaires et l'accumulation de plaques amyloïdes dans le cerveau. Ces plaques contiennent principalement un peptide nommé amyloïde-β (Aβ) sous forme agrégée. Le processus d'agrégation des peptides Aβ en plaques amyloïdes représente une étape clé dans l'apparition de la pathologie, la coordination du cuivre, et également du zinc, favorisant la formation d'espèces agrégées impliquées dans la neurotoxicité. Notre objectif consiste à concevoir des complexes bifonctionnels avec d'une part un analogue de la Thioflavine T (ThT) et d'autre part un complexe de Ru(II), ce travail de thèse s'articule donc selon ces deux axes. I- Nous nous sommes d'abord intéressés à l'interaction entre le peptide Aβ et la Thioflavine T (ThT), fluorophore classiquement utilisé pour étudier l'agrégation du peptide Aβ. Cette interaction a été étudiée principalement par spectroscopie RMN. Les résultats obtenus ont permis d'identifier le site d'interaction de la ThT au peptide Aβ. Par la suite, les effets de la ThT et du Zn(II) sur l'agrégation du peptide Aβ ont été évalués en combinant la RMN et la spectroscopie de fluorescence. A partir des données obtenues, nous avons montré que la ThT et le Zn(II) ne sont pas inertes sur la cinétique d'agrégation du peptide Aβ. Les résultats ont également révélé des différences importantes concernant les informations apportées par la fluorescence et la RMN. II- La coordination du cuivre et du zinc implique principalement les noyaux imidazoles des résidus histidines. Afin d'empêcher la coordination de ces ions métalliques aux peptides Aβ, une stratégie thérapeutique innovante consiste en l'utilisation de complexes platinoïdes comportant des sites labiles et capables de se lier aux résidus histidines du Aβ. En raison de la toxicité des complexes de Pt(II), nous avons envisagé la synthèse de complexes de Ru(II), principalement basés sur le motif fac-Ru(CO)32+. Différents complexes avec des ligands de type glycinate, hydroxyquinolinate et éthylenediamine ont été synthétisés. L'étude de leur interaction avec le peptide Aβ a été réalisée par différentes techniques spectroscopiques (RMN, RPE, fluorescence, spectrométrie de masse). Les résultats obtenus ont montré, en particulier, que les complexes sont capables d'inhiber l'agrégation du peptide Aβ induite par le zinc. / The Alzheimer's disease is characterized by the presence of neurofibrillary tangles and amyloid plaques in the brain. These plaques are formed by aggregated amyloid-β (Aβ) peptide. The Aβ aggregation represents a key event in the appearance of the pathology, copper and zinc coordination favoring the formation of aggregated species involved in the neurotoxicity. Our objective consists in designing bifonctional complexes with, on one hand, a Thioflavine T (ThT) analog and, on the other hand, a Ru(II) complex : this thesis is thus centered around these two axes. I- In this context, we first investigated the interaction between Aβ and ThT, which is a classical dye commonly used to study the aggregation process. This interaction was mainly studied by NMR spectroscopy. Our first results allowed us to identify the interaction site of the ThT with the Aβ peptide. Then, the ThT and Zn(II) effects on the aggregation process were assessed by NMR and fluorescence spectroscopy. From the obtained data, we showed that ThT and Zn (II) are involved in the aggregation kinetic. The results also revealed important differences concerning the information brought by fluorescence and NMR. II- Copper and zinc coordination mainly implies imidazole ring of the histidine residues. In order to prevent the coordination of these metallic ions to Aβ, an innovative therapeutic strategy consists of the use of platinoid complexes containing labile sites which are able to bind the Aβ histidine residues. Because of Pt(II) complexes toxicity, we envisaged the synthesis of Ru(II) complexes, mainly based on fac-Ru(CO)32+ motive. Different complexes with glycinate, hydroxyquinolinate or ethylenediamine ligand were synthesized. The study of their interaction with the Aβ peptide was realized by various spectroscopy techniques (RMN, RPE, fluorescence, mass spectrometry and demonstrated that the complexes are able to prevent the Aβ aggregation induced by zinc.

Thesis advisor: Amir H. Hoveyda / Chapter 1. Mechanistic Insights and Factors Influencing Polytopal Rearrangements in Stereogenic-at-Ru Carbenes. Herein, the mechanistic elucidation of the stereochemical inversion in stereogenic-at-Ru carbene complexes through olefin metathesis (OM) and non-olefin metathesis (non-OM) based polytopal rearrangements is provided. Our investigations involve the isolation and characterization of previously hypothesized higher-energy (e.g., endo-anti) and lower-energy (e.g., exo-anti) diastereomers, and their interconversion under thermal and/or acid-catalyzed conditions is demonstrated. Furthermore, our computational efforts highlighting the importance of the anionic ligands, due to their critical role in trans influence, dipolar interactions, and e-e repulsions, in polytopal rearrangements are reported. Finally, the positive influence of H-bonding in OM and non-OM processes is also rationalized. (a) Khan, R. K. M.; Zhugralin, A. R.; Torker, S.; O'Brien, R. V.; Lombardi, P. J. and Hoveyda, A. H. "Synthesis, Isolation, Characterization, and Reactivity of High-Energy Stereogenic-at-Ru Carbenes: Stereochemical Inversion Through Olefin Metathesis and Other Pathways," J. Am. Chem. Soc. 2012, 134, 12438-12441. (b) Torker, S.; Khan, R. K. M. and Hoveyda, A. H. "The Influence of Anionic Ligands on Stereoisomerism of Ru Carbenes and Their Importance to Efficiency and Selectivity of Catalytic Olefin Metathesis Reactions," J. Am. Chem. Soc. 2014, 136, 3439-3455. Chapter 2. Highly Z- and Enantioselective Ring-Opening/Cross-Metathesis of Enol Ethers Through Curtin-Hammett Kinetics. The first instances of Z- and enantioselective Ru-catalyzed olefin metathesis are presented. Ring-opening/cross-metathesis (ROCM) reactions of oxabicyclic alkenes and enol ethers and a phenyl vinyl sulfide are promoted by 0.5-5.0 mol % of enantiomerically pure stereogenic-at-Ru complexes with an aryloxy chelate tethered to the N-heterocyclic carbene. Products are formed efficiently and with exceptional enantioselectivity (up to >98:2 enantiomer ratio). Surprisingly, the enantioselective ROCM reactions proceed with high Z selectivity (up to >98% Z). Moreover, reactions proceed with the opposite sense of enantioselectivity versus aryl olefins, which afford E- isomers exclusively. DFT calculations and deuterium-scrambling experiments, indicating fast interconversion between endo- and exo-Fischer carbene diastereomers, support a Curtin-Hammett situation. On this basis, models accounting for the stereoselectivity levels and trends are provided. Furthermore, the correlation of Fischer carbene character to the observed chemoselectivity in ROCM with enol ethers is also disclosed. Finally, a general proposal for the substrate-controlled Z selectivity in OM is also discussed. (a) Khan, R. K. M.; O'Brien, R. V.; Torker, S.; Li, B. and Hoveyda, A. H. "Z- and Enantioselective Ring-Opening Cross-Metathesis with Enol Ethers Catalyzed by Stereogenic-at-Ru Carbenes: Reactivity, Selectivity, and Curtin-Hammett Kinetics," J. Am. Chem. Soc. 2012, 134, 12774-12779. (b) Torker, S.; Koh, M. J.; Khan, R. K. M. and Hoveyda, A. H. "Origin of Z selectivity in Olefin Metathesis Reactions of Certain Terminal Alkenes Catalyzed by Typically E-Selective Ru Carbenes," manuscript submitted. Chapter 3. A New Class of Highly Efficient Ru Catalysts for Z-Selective Olefin Metathesis. Herein, we outline a general design for Z-selective OM, which led to the development of a new class of stereogenic-at-Ru carbene complexes (Ru4-9). Furthermore, we demonstrate that the newly developed dithiolate complexes Ru4b and Ru5 efficiently promote high activity and selectivity in ROMP reactions of norbornene and cyclooctene. Notably, the catechothiolate Ru4b catalyzes Z-selective ROCM with a broad scope of alkenes involving various functional groups (e.g., alcohols, enol ethers, vinyl sulfides, amides, heterocycles, and conjugated 1,3-dienes). More importantly, we disclose that the catecholate complex Ru4a is kinetically non-selective in OM and readily decomposes in the presence of mildly acidic moieties (e.g., alcohols and CDCl3). Subsequently, Ru9 is developed to efficiently promote highly Z-selective CM of a diol cross-partner with a wide range of alkene substrates. Most remarkably, the aforementioned protocol is employed in two natural product syntheses and the OM-based Z-selective cracking of oleic acid, which is unprecedented with existing Ru-carbenes and Mo/W-alkylidenes. (a) Khan, R. K. M.; Torker, S. and Hoveyda, A. H. "Readily Accessible and Easily Modifiable Ru-Based Catalysts for Efficient and Z-Selective Ring-Opening Metathesis Polymerization and Ring-Opening Cross-Metathesis," J. Am. Chem. Soc. 2013, 135, 10258-10261. (b) Koh, M. J.; Khan, R. K. M.; Torker, S. and Hoveyda, A. H. "Broadly Applicable Z- and Diastereoselective Ring-Opening/Cross-Metathesis Catalyzed By a Dithiolate Ru Complex," Angew. Chem., Int. Ed. 2014, 53, 1968-1972. (c) Khan, R. K. M. ; Torker, S. and Hoveyda, A. H. "Reactivity and Selectivity Differences Between Catecholate and Catechothiolate Ru Complexes. Implications Regarding Design of Stereoselective Olefin Metathesis Catalysts," J. Am. Chem. Soc. 2014, 136, 14337-14340. (d) Koh, M. J.; Khan, R. K. M.; Torker, S.; Yu, M.; Mikus, M. S. and Hoveyda, A. H. "Synthesis of High-Value Alcohols, Aldehydes and Acids by Catalytic Z-Selective Cross-Metathesis" manuscript submitted. / Thesis (PhD) — Boston College, 2014. / Submitted to: Boston College. Graduate School of Arts and Sciences. / Discipline: Chemistry.

No description available.

Se han sintetizado dos nuevos complejos mononucleares de Ru, con formula [RuCl2(Hbpp)(dmso)2], a partir de la reacción entre [RuCl2(dmso)4] y Hbpp (3,5-bis(2-piridil)pirazola). El hecho que sólo tres de los seis posibles estereoisómeros se obtengan a partir de esta reacción, se ha racionalizado en base a factores estructurales y electrónicos. Estos complejos se han caracterizado de forma estructural, espectroscópica y electroquímica. En acetonitrilo en medio básico, el isómero trans,cis-[RuCl2(Hbpp)(dmso)2] da lugar a procesos de isomerización de enlace de un ligando dmso cuando el Ru(II) se oxida a Ru(III). Las constantes termodinámicas y cinéticas para el proceso se han determinado por voltametria cíclica. La irradiación de trans,cis-[RuCl2(Hbpp)(dmso)2] y cis(out),cis-[RuCl2(Hbpp)(dmso)2] con luz UV o solar da lugar a reacciones de fotosustitución de un ligando dmso por una molécula de acetonitrilo para dar un nuevo compuesto el cual ha sido caracterizado en solución por técnicas espectroscópicas y electroquímicas. Ambos complejos resultan catalizadores útiles en la transferencia de hidrógeno de isopropanol a acetofenona, obteniéndose 1-feniletanol como único producto y un 42.1% de conversión (36.1 ciclos metálicos) a 80ºC con el isómero trans,cis-[RuCl2(Hbpp)(dmso)2], que resulta significativamente más eficaz que el complejo cis(out),cis-[RuCl2(Hbpp)(dmso)2].La reacción de cis(out),cis-[RuCl2(Hbpp)(dmso)2] con trpy (2,2':6',2"-terpiridina) da lugar a los dos isómeros geométricos del complejo [Ru(Hbpp)(trpy)(Cl)]+, el in y el out. Estos complejos se han aislado y caracterizado por técnicas estructurales, espectroscópicas y electroquímicas. Estos cloro complejos han sido utilizados como precursores para la síntesis de los complejos análogos con ligandos aqua (in,out-[Ru(Hbpp)(trpy)(H2O)]2+) y piridina (in,out-[Ru(Hbpp)(trpy)(py)]2+), los cuales también han sido aislados y caracterizados. Las propiedades ácido-base de los aqua complejos, y del complejo out-py se han estudiado detalladamente por voltametria cíclica y mediante valoraciones espectrofotométricas ácido-base. El tratamiento matemático de los datos así obtenidos nos ha permitido determinar los valores de pKa para los distintos equilibrios de protonación de los complejos en los estados de oxidación II y III. El complejo out-aqua ha demostrado ser un buen catalizador para la oxidación electroquímica del alcohol benzílico, presumiblemente a benzaldehido. La constante de velocidad de segundo orden para el proceso ha sido determinada como 17.1 M-1 s-1, por simulación matemática.El dímero con un puente cloro, [Ru2Cl(bpp)(trpy)2]2+ ha sido preparado por dos rutas sintéticas diferentes. El dímero análogo con un puente acetato se ha obtenido por reacción del cloro dímero con un exceso de acetato sódico. El dímero con dos ligandos aqua [Ru2(bpp)(trpy)2(OH2)2]3+ puede obtenerse por hidrólisis ácida del complejo con un acetato puente o por hidrólisis básica del complejo con un puente cloro. Estos complejos han sido caracterizados por técnicas estructurales, espectroscópicas y electroquímicas. Las soluciones del dímero con dos ligandos aqua en medio ácido resultan inestables a la coordinación de aniones de la solución con el tiempo. Las propiedades ácido-base del dímero con dos aguas coordinadas han sido estudiadas por voltametria cíclica y mediante experimentos de electrólisis a potencial controlado. El pKa para la desprotonación de uno de los ligandos aqua ha sido determinado mediante una valoración espectrofotométrica ácido-base como 6.7. Este valor tan bajo de pKa se atribuye a la formación de la entidad {Ru2O2H3}, favorable termodinámicamente. Los espectros UV-vis para los distintos estados de oxidación del aqua dímero, de RuIIRuII a RuIIIRuIV, han sido obtenidos por oxidación química y electroquímica del complejo. Se han llevado a cabo estudios cinéticos de la oxidación, paso a paso, de RuII,II a RuIV,IV , y se han determinado las constantes de oxidación de segundo orden para los distintos procesos de oxidación. La capacidad del aqua dímero en la oxidación del agua a oxígeno molecular ha sido investigada en solución homogénea utilizando CeIV como oxidante. La evolución de oxígeno se ha demostrado por cromatografia de gases. Se ha obtenido una eficiencia del 73% y 18.6 ciclos catalíticos, cuando 1.83 x 10-6 moles de dímero se han mezclado con un exceso de 100 equivalentes de cerio. El dímero con dos aguas cataliza también la oxidación del agua de forma heterogénea, con el complejo adsorbido sobre una membrana de nafion, aunque la eficiencia es menor. Se ha propuesto un mecanismo intramolecular para la reacción de oxidación del agua. Consiste en la oxidación a 4 electrones del dímero, de RuII,II a RuIV,IV, el cual reacciona con el agua para formar oxígeno y revierte nuevamente al estado de oxidación II,II. Este modelo es consistente con estudios catalíticos de la evolución de oxígeno en función de las concentraciones de cerio y catalizador, llevados a cabo en solución ácida homogénea, que demuestran que la oxidación a 4 electrones del agua se encuentra catalizada por una sola molécula de complejo bajo concentraciones elevadas de cerio. La constante de pseudo-primer-orden para la evolución de oxígeno tiene un valor de 1.4 x 10-2 s-1, que es uno de los valores de constante más elevados obtenidos hasta la fecha. Desafortunadamente, el aqua dímero se desactiva durante el proceso de catálisis dando lugar a una especie naranja, la cual estamos actualmente tratando de caracterizar. / Two new mononuclear Ru complexes with formula [RuCl2(Hbpp)(dmso)2], 2a and 2b, have been prepared from [RuCl2(dmso)4] and Hbpp (3,5-bis(2-pyridyl)pyrazole). The fact that only three (2a and the pair of enantiomers 2b) from the six possible stereoisomers are obtained from this reaction, has been rationalized in terms of structural and electronic factors, particularly the intramolecular hydrogen bond between the inner dmso and the aminic proton of Hbpp. 2a and 2b have been structurally, spectroscopically and electrochemically characterized. In acetonitrile basic media, 2a has proven to undergo linkage isomerization reactions of one dmso ligand when going from RuII to RuIII. The kinetic and thermodynamic constants for this process have been determined by means of cyclic voltammetry. Irradiation of either 2a or 2b with UV or sunlight provokes the replacement of one dmso by an acetonitrile molecule so that a new compound is formed, which has been characterized in solution by spectroscopic and electrochemical techniques. The fact that only one of the two dmso ligands is substituted, compared to related systems where two successive substitutions of dmso for MeCN take place, suggests that the inner dmso is much more stable due to the hydrogen bond with the aminic proton of Hbpp. 2a and 2b have proven to be active catalysts in the hydrogen transfer from 2-propanol to acetophenone, yielding 2-phenylethyl alcohol as the only product and 42.1% conversion (36.1 metal cycles) at 80 ºC for 2a, which is markedly more efficient than 2b.Two geometrical chloro isomers with formula out and in-[Ru(Hbpp)(trpy)(Cl)]+, 2a (out) and 2b (in), are obtained from the reaction of cis(out),cis-[RuCl2(Hbpp)(dmso)2] and trpy (2,2':6',2"-terpyridine). Better yields of these complexes can be obtained by a different route which uses [RuCl3(trpy)] and bpp-BOC as starting materials. These compounds have been isolated and characterized by means of structural, spectroscopic and electrochemical techniques. 2a and 2b have been used as starting materials for the synthesis of the analogous aqua (out and in-[Ru(Hbpp)(trpy)(H2O)]2+; 3a and 3b) and pyridine (out and in-[Ru(Hbpp)(trpy)(py)]2+; 4a and 4b) complexes, which have also been isolated and characterized. The acid-base properties of the aqua complexes, 3a and 3b, and the pyridyne complex 4a have been thoroughly investigated by cyclic voltammetry (Pourbaix diagram) and acid-base spectrophotometric titrations. Mathematical treatment of the experimental data thus obtained has allowed us to determine the pKa values for the different protonation equilibria of the complexes in oxidation states II and III. 3a has been shown to be a good catalyst in the electrochemical oxidation of benzyl alcohol, presumably to benzaldehyde. The second-order rate constant for the process has been determined as 17.1 M-1 s-1 by mathematical simulation. Two different synthetic routes have been used to prepare the chloro-bridge dimer [Ru2(Cl)(bpp)(trpy)2]2+, 1, in good yield. The acetato-bridge dimer [Ru2(O2CCH3)(bpp)(trpy)2]2+, 2, has been obtained from 1 and excess sodium acetate. The diaqua complex [Ru2(bpp)(trpy)2(OH2)2]3+, 3, has been prepared from either basic hydrolysis of 1 or acid hydrolysis of 2. These complexes have been characterized by means of structural, spectroscopic and electrochemical techniques. Long-standing solutions of the diaqua dimer 3 in acidic media have proven to be unstable to coordination of anions from the solution. Crystals of the trifluoroacetato-bridge dimer 4 have been obtained in acidic CF3COOH media after some days. The acid-base properties of the diaqua dimer 3 have been thoroughly investigated by cyclic voltammetric and bulk electrolysis experiments, and the corresponding Pourbaix diagram obtained. The pKa for the one-proton deprotonation of one aqua ligand has been determined by acid-base spectrophotometric titration as 6.7. This low pKa value is attributed to the formation of the highly stable (Ru2O2H3) entity. The UV-vis spectra for the different oxidation states of 3, from RuIIRuII to RuIIIRuIV, have been obtained by either chemical or electrochemical oxidation of the complex. UV-vis kinetic studies on the stepwise oxidation from RuII,II to RuIV,IV have been performed, and the individual second-order rate constants for the different oxidation processes determined. The capability of 3 in water oxidation to molecular dioxygen has been investigated in homogeneous solution using CeIV as oxidant. Oxygen evolution has been clearly demonstrated by gas chromatography. An efficiency of 73% and 18.6 metal cycles were obtained using 1.83 x 10-6 mols of dimer and 100-fold molar excess of cerium. This complex has also been shown to catalyze water oxidation in a heterogenous Nafion membrane, but the yields of O2 evolution are lower. An intramolecular pathway for the water oxidation process has been proposed. It involves the four-electron oxidation of the RuII,II dimer to the RuIV,IV complex that reverts to the RuII,II oxidation state upon releasing of molecular dioxygen. This model is consistent with kinetic studies on the evolution of oxygen as a function of catalyst and cerium concentrations, performed in homogeneous acidic solution, which show that the four-electron oxidation of water is catalyzed by one molecule of complex under large excesses of cerium. The pseudo-first-order rate constant for oxygen evolution has been calculated as 1.4 x 10-2 s-1, which is among the highest values reported up to date. Unfortunately, the diaqua dimer 3 is deactivated during the catalysis to yield an orange species which we are currently trying to characterize.

Based on the linear relationship between concentration of H2O2 and the decrease of electrochemiluminescence (ECL) intensity in a Ru(bpy)32+/TPA system, procedures for the indirect determination of glucose with a flow injection analysis were developed. By passing solutions of glucose through a FIA system containing a glucose oxidase (GOx) immobilized sol-gel column and an ECL system of Ru(bpy)32+ and TPA, glucose can be determined optimally with a detection limit of 1.0 £gM in a linear dynamic range of 1.0 ¡V 200.0 £gM. A repetitive injection of glucose (100 £gM) and human serum solutions gave satisfactory reproducibility with relative standard deviations of 1.3 (N=31) and 3.9 % (N=42) respectively. Interference due to the presence of ascorbic acid, uric acid or other reducible agents in solution can be corrected by passing sample solutions through another sol-gel column that contained no GOx. From the agreement between the contents of glucose in human serum and soft drink analyzed by the developed method and those obtained by the spectroscopy method based glucose assay kit and satisfactory recovery of glucose from interferent containing solutions, the feasibility of the developed method for real sample analysis was confirmed. One of the major purposes of this study was to develop new immobilization approaches and flow cell designs for the fabrication of regenerable ECL-based sensors with improved sensitivity, convenience and long-term stability. Silica particulates were used as immobilization support in ECL sensors for TPA and NAD(P)H and in biosensors for glucose and glucose-6-phosphate¡]G6P¡^. The first ECL flow cell was fabricated from a glass tube, and a platinum wire was used as working electrode held at +1.3 V. The volume of the flow cell was about 50 £gL. An Ag/AgCl electrode and a piece of Pt wire were used as the reference and counter electrode respectively and placed downstream of the working electrode. Ru(bpy)32+ immobilized silica particulates with 1/3 silica sol content showed the best performance for TPA determination, and the sensitivity of TPA determination was dependent upon the amount of Ru(bpy)32+ immobilized in silica particulates. The lowest level of analyte detected for TPA was 0.02£gM, and linear range was from 0.02£gM to 5£gM. Up to a certain concentration level, it was found that Ru(bpy)32+ was tightly held in silica particulates and did not leach out into aqueous solutions, even with continuous flow for up to ten hours. Ru(bpy)32+ immobilized silica particulates were characterized of well activity and high stability; that stored at 0¢J exhibited its original activity for up to one year. The second ECL flow cell was fabricated from a piece of epoxy block supported Pt electrode (1 ¡Ñ 2 cm) as counter electrode, a piece glass window and a polyethylene spacer with 78 £gL cell volume, two 2.0-cm length of 0.6-mm diameter platinum wires were used as working electrodes held at +1.1 V, and an Ag/AgCl electrode as reference electrode. All three electrodes were incorporated within the main body of the cell. One of the biosensor design packed Ru(bpy)32+ incorporated silica particulates in the ECL flow cell, and a glucose dehydrogenase (GDH) immobilized silica sol-gel column is placed between the sample injection valve and the flow cell. The ECL response to samples containing glucose and cofactor (NADP) results from the Ru(bpy)33+ ECL reaction with NADPH produced by glucose dehydrogenase. This ECL biosensor was shown applicable for both NAD+- and NADP+- dependent enzymes, where NADH detection ranged from 0.50£gM ¡V 5.0 mM NADH and NADPH detection ranged from 1.0£gM - 3.0 mM NADPH. Glucose can be determined in a linear dynamic range of 5.0 - 500 £gM. Another biosensor design immobilized glucose-6-phosphate dehydrogenase¡]G6PDH¡^onto the Ru(bpy)32+ -doped silica particulates through silica chemistry and then packed these particulates into the ECL flow cell. By passing samples containing G6P and cofactor (NAD) through the ECL flow cell, G6P can be determined in a linear dynamic range of 10.0 £gM-1.0 mM. The regenerable ECL biosensor was characterized of good reproducibility and well stability for flow injection analysis. A repetitive injection of NADH (100 £gM) and G6P¡]500£gM¡^gave satisfactory reproducibility with relative standard deviations of 2.8 %¡]N=105¡^and 2.8 % (N=40) respectively.

Understanding of the interrelationship between structure, thermodynamic properties and phase diagrams is very useful for rationalizing the behavior of materials and development of predictive models, which can be used to optimize the composition of materials and their fabrication processes. The properties of materials are governed by its electronic and crystallographic structure. Chemical bonding determines the electronic structure of materials. Furthermore, the electronic structure plays a predominant role in determining the physical, electrical, magnetic, thermal and optical properties of materials. Crystal structure also influences most properties of materials. Since changes in thermodynamic variables such as temperature, pressure, and composition dramatically alter the physical properties of materials and its structure, it is desirable to study the thermodynamic stability of materials in conjunction with phase relations. Phase diagrams can indicate the ranges of pressure, temperature and chemical composition where specific phases and mixtures of phases are stable. If the Gibbs energies of all the phases involved are known, phase diagram can be computed using Gibbs energy minimization algorithms. In recent times, one of the important uses of thermodynamics in materials science has been in the computation of phase diagrams. To materials scientists phase diagrams are like maps to travelers. They guide the path through the composition space to find phases, fulfilling specific materials performance requirements. As phase diagrams are the graphic representations of minimizations of Gibbs energy under given constraints, computational thermodynamics significantly expands our capability to walk in the multi-component space of engineering materials. High-temperature phase-equilibrium studies, thermodynamics and materials processing have had a close relationship over a number of decades. Successful utilization of ceramic materials under different environmental conditions at high temperatures requires accurate thermodynamic data. Focus of the present investigation is to obtain correct phase relations and accurate thermodynamic data in selected technologically important ceramic oxide systems in which the data are either not available or are inconsistent. Based on the experimental data, different types of phase diagrams are computed for the systems of contemporary relevance. After a brief introduction, Chapter 1 discusses the brief overview of the experimental techniques available for determining the phase relations and thermodynamic properties at high temperatures and the methods used in this study. The chapter reviews the possible sources of errors in experimental techniques and tests for correct functioning. In Chapter 2, systematic studies on high-temperature phase equilibria and thermodynamic properties of compounds in the ternary systems Ln-Pd-O (Ln = La, Pr, Eu, Gd, Tb, Dy, Ho and Er) are presented. Some of the ternary oxides on the Ln-Pd-O systems have potential application in catalysis and electrochemistry. To optimize the parameters for the synthesis and to understand the behavior of the catalysts, it is useful to have information on the thermodynamic stability domain of each compound. Quantitative information on the stability of the ternary oxides is also useful for assessing the interaction of metal Pd with ceramic compounds containing rare-earth elements under different environments. Furthermore, the thermodynamic data are beneficial for the design of processes for the recovery of rare earth and precious metals from scrap. There is very little thermodynamic and phase diagram information on the Ln-Pd-O systems. Isothermal sections of phase diagram for the ternary system La-Pd-O at 1200 K and for the systems Ln-Pd-O (Ln = Pr, Eu, Gd, Tb, Dy, Ho and Er) at 1223 K, were established by the isothermal equilibration technique at high temperatures. Phases were identified after quenching by optical and scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive X-ray spectroscopy (EDS). Based on the phase relations, the thermodynamic properties of ternary interoxide compounds were determined by the solid-state galvanic cell technique over a range of temperature between 925 - 1400 K. An advanced version of the solid-state cell incorporating a buffer electrode was used for high temperature thermodynamic measurements. The function of the buffer electrode, placed between reference and working electrodes, was to absorb the electrochemical flux of the mobile species through the solid electrolyte caused by trace electronic conductivity. The buffer electrode prevented polarization of the measuring electrode and ensured accurate data. Yttria-stabilized zirconia was used as the solid electrolyte and pure oxygen gas at a pressure of 0.1 MPa as the reference electrode. These novel features enhanced the accuracy of thermodynamic data. From electrochemical measurements, the standard enthalpies of formation of these oxides from elements and their standard entropies at 298.15 K were also evaluated. The variation of the lattice parameters and unit cell volume as a function of rare earth atomic number for the three ternary compounds Ln4PdO7, Ln2PdO4 (Ln = La, Pr, Nd, Sm, Eu, Gd) and Ln2Pd2O5 (Ln = La to Er) are discussed. The systematic variations of thermodynamic properties of all the ternary compounds as a function of rare earth atomic number are presented and correlated with structural features. Thermodynamic and structural parameters of uninvestigated Ln-Pd-O systems (Ln = Ce, Pm) can be obtained by interpolation. Based on the thermodynamic information obtained in this study and auxiliary data on binary compounds available in the literature, different types of phase diagrams, isothermal oxygen potential diagrams, isobaric phase diagrams, isothermal two dimensional and three-dimensional chemical potential diagrams for the systems Ln-Pd-O (Ln = La, Pr, Eu, Gd, Tb, Dy, Ho and Er) are constructed. Chapter 3 contains the studies on partial phase diagrams of the systems M-Ru-O (M = Ca and Sr) at 1300 K and determination of Gibbs energies of formation of calcium and stronsium ruthenates in the temperature range from 925 to 1350 K using solid-state cells with yttria-stabilized zirconia as the electrolyte and Ru + RuO2 as the reference electrode. Gibbs energies, enthalpies and entropies of formation of calcium and strontium ruthenates from their component binary oxides were deduced. The standard enthalpies of formation of these oxides from elements and their standard entropies at 298.15 K were also evaluated. Based on the thermodynamic data obtained in this study and auxiliary information from the literature, the three dimensional representation of oxygen potential diagram for the M-Ru-O systems (M = Ca and Sr) as a function of composition and temperature are computed. The purpose of this chapter is to determine the thermodynamic stability of alkaline earth metal ruthenates in the perovskite related layered system Mn+1RunO3n+1 (n = 1, 2, and ¥ for Ca-Ru-O system and n = 1, 2, 3 and µ for Sr-Ru-O system) since these calcium and stronsium ruthenates have interesting magnetic and electronic device applications. Moreover, there is no literature available for thermodynamic properties on first and second members of the Ruddelsdon-Popper (R-P) series in Ca-Ru-O system, Ca2RuO4, Ca3Ru2O7 and third member of R-P series in Sr-Ru-O system, Sr4Ru3O10. Some of the available literature information on thermodynamic properties for other compounds of R-P series in Mn+1RunO3n+1 (M = Ca, Sr) are found to be based on incorrect assumptions and erroneous calculation. Thus, this chapter provides the complete thermodynamic information for all the electronically and magnetically applicable alkaline earth metal ruthenates for optimizing the deposition condition in device fabrications. Chapter 4 gives the structure-properties correlations of 2-3 spinel compounds and spinel-corundum equilibria for the system NiO-Al2O3-Cr2O3 at 1373 K. Nickel, aluminum and chromium are important base-constituent elements of high-temperature oxidation-resistant alloys. A spinel phase is usually found in the protective scale formed on the surface of the alloys. There is no thermodynamic data on spinel solid solution NiAl2O4-NiCr2O4. Thus, the phase relations and mixing properties of the spinel solid solution have been determined in this chapter. The inter-crystalline ion-exchange equilibrium between NiAl2+2xO4+3x-NiCr2O4 spinel solid solution and Al2O3-Cr2O3 solid solution with corundum structure in pseudo-ternary system NiO-Al2O3-Cr2O3 have been determined by the conventional tie-line rotation method at 1373 K. The nonstoichiometry of NiAl2+2xO4+3x has been taken into consideration. Lattice parameters were used to obtain the compositions of the corundum and spinel solid solutions at equilibrium. Formation of homogeneous solid solutions and attainment of equilibrium were confirmed by X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS). From the experimental tie-line information and thermodynamic data on Al2O3-Cr2O3 solid solution available in the literature, the activities in the spinel solid solution were derived by using a modified Gibbs-Duhem integration technique. Gibbs energy of mixing of the spinel solid solution has been calculated from the derived activity data. Since high temperature data generation is expensive and time consuming, it is useful to develop models, which relate thermodynamic properties to electronic and crystallographic structure, leading to predictive modeling of mixing properties. By comparing the results from models with experimental information, one can evolve methodologies for the prediction of the properties of uninvestigated system. A model can be used to discriminate among conflicting experimental data and extrapolate the data into regions where direct measurements are lacking or difficult to perform. In this chapter, a model approach has also been considered to analyze the activity-composition relationship in the NiAl2O4-NiCr2O4 spinel solid solution in terms of the intra-crystalline exchange of cations between the tetrahedral and octahedral sites of the spinel structure governed by site preference energies of the cations. Since Ni2+ and Cr3+ ion in tetrahedral coordination exhibits Jahn-Teller distortion, an entropy corresponding to randomization of the distortion in the cubic phase has been incorporated in the cation distribution model. The thermodynamic mixing properties of stoichiometric spinel solid solution NiAl2O4-NiCr2O4 in terms of one mole of mixing species were computed at 1373 K. The strain energy caused by size mismatch was added as a separate term to the Gibbs energy of mixing using empirical relationship between enthalpy of mixing for a pair of ions and the difference in their ionic volumes. Madelung constant and electrostatic contribution of energy of mixing of the spinel solid solution have also been computed. Comparison of Gibbs energy of mixing calculated using the cation mixing model for the stoichiometric spinel solid solution NiAl2O4-NiCr2O4 with that of the experimental tie-line data for nonstoichiometric spinel solid solution NiAl2+2xO4+3x-NiCr2O4 were included in this chapter. The thermodynamic mixing properties obtained in this study would be helpful in understanding the formation of complex spinel protective layers on alloys containing nickel, aluminium and chromium in high-temperature applications. The summary of the important finding and the conclusions arrived at on the basis of results obtained from the present investigations are presented in Chapter 5.

Made available in DSpace on 2014-12-17T13:57:12Z (GMT). No. of bitstreams: 1 DeboraNP_DISSERT.pdf: 3960791 bytes, checksum: 9647ee4242a9677af8d31483a39ab9ab (MD5) Previous issue date: 2013-07-25 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The Noise Pollution causes degradation in the quality of the environment and presents itself as one of the most common environmental problems in the big cities. An Urban environment present scenario and their complex acoustic study need to consider the contribution of various noise sources. Accordingly to computational models through mapping and prediction of acoustic scene become important, because they enable the realization of calculations, analyzes and reports, allowing the interpretation of satisfactory results. The study neighborhood is the neighborhood of Lagoa Nova, a central area of the city of Natal, which will undergo major changes in urban space due to urban mobility projects planned for the area around the stadium and the consequent changes of urban form and traffic. Thus, this study aims to evaluate the noise impact caused by road and morphological changes around the stadium Arena das Dunas in the neighborhood of Lagoa Nova, through on-site measurements and mapping using the computational model SoundPLAN year 2012 and the scenario evolution acoustic for the year 2017. For this analysis was the construction of the first acoustic mapping based on current diagnostic acoustic neighborhood, physical mapping, classified vehicle count and measurement of sound pressure level, and to build the prediction of noise were observed for the area study the modifications provided for traffic, urban form and mobility work. In this study, it is concluded that the sound pressure levels of the year in 2012 and 2017 extrapolate current legislation. For the prediction of noise were numerous changes in the acoustic scene, in which the works of urban mobility provided will improve traffic flow, thus reduce the sound pressure level where interventions are expected / A Polui??o Sonora provoca degrada??o na qualidade do meio ambiente e se apresenta como um dos mais frequentes problemas ambientais nas grandes cidades. Os ambientes urbanos possuem cen?rios ac?sticos complexos e seus estudos precisam considerar a contribui??o de fontes sonoras diversas. Nesse sentido, os modelos computacionais, por meio do mapeamento e predi??o do cen?rio ac?stico, se tornam importantes, uma vez que possibilitam a realiza??o de c?lculos, de an?lises e de relat?rios que permitem a interpreta??o de resultados satisfat?rios. O bairro de estudo ? o bairro de Lagoa Nova, ?rea central da cidade do Natal, o qual passar? por grandes mudan?as no espa?o urbano devido ?s obras de mobilidade urbana previstas para o entorno do est?dio Arena das Dunas em decorr?ncia da Copa de 2014 e as consequentes mudan?as da forma urbana e no tr?fego. Dessa forma, este trabalho objetiva avaliar o impacto sonoro provocado pelas altera??es vi?rias e morfol?gicas no entorno deste est?dio no bairro de Lagoa Nova em Natal, a partir de medi??es in loco e do mapeamento com a utiliza??o do modelo computacional SoundPLAN no ano 2012 e a evolu??o do cen?rio ac?stico para 2017. Para tal an?lise, realizou-se, primeiramente, a constru??o do mapeamento ac?stico atual com base no diagn?stico ac?stico do bairro, mapeamento f?sico, contagem classificada dos ve?culos e medi??o do n?vel de press?o sonora; e para se construir a predi??o de ru?do, observou-se, para a ?rea de estudo, as modifica??es previstas para o tr?fego, forma urbana e obras de mobilidade. Conclui-se que os n?veis de press?o sonora do ano 2012 e para 2017 extrapolam, em parte, a legisla??o vigente. Para a predi??o do ru?do foram verificadas v?rias modifica??es no cen?rio ac?stico, no qual as obras de mobilidade urbana previstas melhorar?o o fluxo do tr?fego, consequentemente, reduzir?o o n?vel de press?o sonora onde est?o previstas as interven??es

Made available in DSpace on 2014-12-17T15:06:44Z (GMT). No. of bitstreams: 1 PedroGL.pdf: 4055992 bytes, checksum: 07612ef4f6c8a37bccd1cdde0131f320 (MD5) Previous issue date: 2009-01-30 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / This master thesis is an overview of how the Egyptian writing became a ruin, and then was mythunderstood by the Western culture through speculations based on its figurative appeal or by its magical nature this invention results not only in new idea of writing, but also in many graphical experiments which take part in the creation of the Renaissance and Baroque visual identity / A presente disserta??o ? um panorama de como a escrita hierogl?fica eg?pcia se torna uma ru?na e ent?o ? reinterpretada pelo Ocidente atrav?s de especula??es motivadas por seu apelo imag?tico ou por seu car?ter m?gico uma inven??o que resulta n?o apenas numa nova id?ia escrita, transcendental, mas que se desdobra em v?rias experimenta??es gr?ficas que participam ativamente da cria??o da identidade visual do Renascimento e Barroco

Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2017-02-20T22:47:58Z No. of bitstreams: 1 OdmaksuelAnisioBezerraDantas_DISSERT.pdf: 5356247 bytes, checksum: a2a17290abc4832c7f0cd9ef68881d06 (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2017-02-24T22:03:21Z (GMT) No. of bitstreams: 1 OdmaksuelAnisioBezerraDantas_DISSERT.pdf: 5356247 bytes, checksum: a2a17290abc4832c7f0cd9ef68881d06 (MD5) / Made available in DSpace on 2017-02-24T22:03:21Z (GMT). No. of bitstreams: 1 OdmaksuelAnisioBezerraDantas_DISSERT.pdf: 5356247 bytes, checksum: a2a17290abc4832c7f0cd9ef68881d06 (MD5) Previous issue date: 2016-08-15 / Os sinais ruidosos registrados durante o monitoramento de opera??es de fraturamento hidr?ulico num campo de petr?leo podem trazer informa??es importantes sobre a estrutura do subsolo. Tais informa??es s?o extra?das atrav?s de um conjunto de procedimentos de an?lise e processamento de dados, baseado na t?cnica de Interferometria S?smica de Ru?do Ambiente (ISRA). Na pr?tica, a t?cnica envolve a realiza??o de duas etapas: a correla??o cruzada, que ? equivalente a convolu??o de um dos sinais com o outro reverso no tempo, e o empilhamento (stacking) dos resultados gerados. A resposta encontrada pela mesma ? equivalente a Fun??o de Green emp?rica do meio convolvida com a wavelet da fonte e por esse motivo, a Interferometria S?smica tamb?m ? chamada de recupera??o da Fun??o de Green. Neste trabalho, novas respostas s?smicas foram obtidas atrav?s da combina??o de duas t?cnicas de correla??o cruzada (correla??o cruzada cl?ssica normalizada geometricamente - CCGN e correla??o cruzada de fase - PCC) com duas t?cnicas de empilhamento (empilhamento linear - LS e o empilhamento n?o linear ou ponderado por fase - PWS). Consequentemente, quatro abordagens foram alcan?adas, que ap?s submetidas a um fluxo de processamento padr?o de dados s?smicos resultou em quatro se??es s?smicas empilhadas (LS-PCC - empilhamento linear com correla??o cruzada de fase, LS-CCGN - empilhamento linear com correla??o cruzada cl?ssica normalizada geometricamente, PWS-PCC - empilhamento n?o linear com correla??o cruzada de fase e PWS-CCGN - empilhamento n?o linear com correla??o cruzada cl?ssica normalizada geometricamente). Para interpreta??o dos resultados, uma modelagem s?smica direta foi realizada a fim de obter uma se??o s?smica sint?tica. A interpreta??o dos resultados com o uso de informa??es de dados sint?ticos e da geologia mostrou que alguns eventos correspondentes a marcadores geol?gicos foram recuperados. Isto contribuiu para a comprova??o de que ? poss?vel recuperar as reflex?es de um meio em subsuperf?cie utilizando registros de ru?do s?smico ambiente e a t?cnica de Interferometria S?smica. / The noisy signals recorded during the monitoring hydraulic fracturing operations in an oil field can provide important information on the structure of the subsoil. Such information is extracted through a set of procedures for analyzing and processing data, based on the technique of of Ambient Noise Interferometry Seismic (ANSI). In practice, the technique involves the realization of two steps: the cross-correlation, which is equivalent to a convolution of the signals with each other in reverse time and the stacking the results generated. The answer is found by this is equivalent to empirical Green function convolved the medium of the source wavelet and therefore, the seismic interferometry recovery is also called the Green function. In this work, new seismic responses were obtained by combining two cross-correlation techniques (classical cross-correlation geometrically normalized - CCGN and phase cross-correlation - PCC) with two stacking techniques (linear stack - LS and the nonlinear stack or phase-weighting stack - PWS). Consequently, four approaches have been reached which, after undergoing a standard processing flow of seismic data resulted in four stacked seismic sections (LS-PCC - linear stack with phase cross-correlation, TS-CCGN - linear stack with classical cross-correlation geometrically normalized, PWS-PCC - nonlinear stack with phase cross-correlation and PWS-CCGN - nonlinear stack with classical cross-correlation geometrically normalized). To interpret the results, a direct seismic modeling was performed to obtain a synthetic seismic section. Interpretation of the results with the use of synthetic data information and geology showed that some events corresponding to geological markers were recovered. This adds to the confirmation that is possivel retrieve the reflections of an environment in the subsurface using ambient seismic noise records and seismic interferometry technique.