Malgré les efforts extrêmement importants réalisés pour la recherche de nouveaux agents anticancéreux, les traitements par chimiothérapie ne permettent toujours pas de traiter efficacement un grand nombre de tumeurs. En effet, les molécules utilisées cliniquement ne sont généralement pas sélectives des tissus cancéreux et la destruction des tissus sains qu'elles engendrent provoque de lourds effets secondaires. Le développement de nouvelles stratégies thérapeutiques plus sélectives représente donc un intérêt majeur en chimie médicinale. Dans ce cadre, nous avons développé plusieurs vecteurs non toxiques conçus pour reconnaître des spécificités liées à la malignité puis libérer de manière contrôlée des agents cytotoxiques exclusivement au niveau de la tumeur. Dans le cadre de cette thèse, le concept de vecteur glucuronylé a été adapté à la MMAE et à la cyclopamine. Ces vecteurs pourront être sélectivement activé par la B-glucuronidase présente en concentration importante dans les zones nécrotiques de nombreuses tumeurs solides et ainsi libérer ces agents anticancéreux au niveau des tissus cancéreux. Des études préliminaires visant à évaluer l'efficacité de ces composés in-vitro et in-vivo ont montré la validité de cette approche. Dans un deuxième temps, un vecteur glucuronylé de la doxorubicine pouvant se lier à l'albumine plasmatique a été conçu. Une étude réalisée chez la souris a montré que ce composé possède une efficacité thérapeutique similaire à celle de la doxorubicine et ne provoque pas les effets secondaires constatés lors du traitement avec la drogue seule. La troisième partie est consacrée au développement du premier vecteur activable par la B-galactosidase ut / Despite several years of intensive research devoted to the discovery of novel anticancer agents, chemotherapy is still not entirely effective for the treatment of many solid tumors. Most of the drugs used clinically act by anti-proliferative mechanisms and lack any intrinsic selectivity, leading to severe adverse effects due to the destruction of normal tissues. Therefore, the development of more selective therapeutic approaches has become a major goal in medicinal chemistry. Within this framework, we have developed several nontoxic drug carriers designed for both the efficient recognition of malignant specificities and the controlled release of anti-neoplastic agents exclusively at the tumour site. First, we applied the concept of glucuronide prodrugs to MMAE and Cyclopamine in order to deliver these anticancer drugs at the tumor site. Indeed, glucuronide prodrugs can be selectively activated by B-glucuronidase present in high concentration in necrotic area of numerous solid tumors. Preliminary in vitro and in vivo evaluations of these prodrugs demonstrated the potential of this approach. Second, we studied the first B-glucuronidase-responsive albumin-binding prodrug designed for the selective delivery of doxorubicin at the tumor site. In vivo experiment conducted in mice show that this compound inhibits tumor growth in a similar manner to doxorubicin whilst avoiding side effects induced by the free drug. We also developed the first B-galactosidase-responsive drug delivery system suitable for the treatment of solid tumors in PMT. Such a targeting system can be selectively activated by lysosomal B-galactosidase located inside malignant cells expressing a specific tumor-a

We study the conformational properties of dendrimers with flexible spacers in solutions over a wide range of concentrations from dilute solutions to melts. By combining large scale computer simulations using the bond fluctuation model with scaling arguments we identify the semi-dilute regime of dendrimers which is controlled by the concentration behavior of the linear spacers. Associated with this observation we find that the decrease in the size of flexible dendrimers is accompanied by increasing interpenetration between the molecules with increasing concentration of the solution. In the melt state we show that the size of individual dendrimers follows the scaling prediction for isolated dendrimers at the θ-point rather than that of collapsed dendrimers. The pair correlation functions between the centers of dendrimers indicate that for short spacers dendrimer solutions retain the morphological characteristics of simple liquids. For long spacers the functions reveal high penetration of neighboring dendrimers in the melt state. Our studies show that flexible dendrimers in solution can be understood with arguments similar to those of linear polymers. The role of generation is to influence the particular form of the crossover-function.

No description available.

Introduit originellement par Katzenellenbogen en 1980 , les espaceurs auto-immolables sont définis comme des assemblages covalents capable de corréler la coupure de deux liaisons. La première coupure intervient au niveau du groupement protecteur A, générant un intermédiaire qui conduit spontanément à la rupture de la liaison entre l’espaceur et l’espèce B (par exemple, un composé bioactif). Katzenellenbogen avança que les espaceurs auto-immolables pourraient permettre d’outrepasser les limitations des thérapies classiques (administration directe de composés bioactifs, notamment) et conduiraient à l’émergence d’une nouvelle génération de prodrogues. Ayant effectivement amené une innovation considérable dans ce domaine, ces espaceurs ont depuis trouvé nombres d’applications dans des domaines plus variés (chimie analytique, matériaux, …) ; dont nous présenterons un aperçu.Nous avons taché également de décrire plus en détail les mécanismes d’auto-immolation, conduisant l’intermédiaire à se désassembler et à libérer la molécule B. En effet, chacun de ces mécanismes confèrent des propriétés particulières à l’espaceur en termes de cinétique d’auto-immolation et de compatibilités chimiques possibles principalement. Il est donc primordial d’établir les avantages et les inconvénients de chaque type d’espaceur afin de déterminer au mieux quel genre de structure employer pour l’utilisation choisie.Notre travail a consisté dans un premier temps à compléter certaines données de la littérature afin d’approfondir notre connaissance des espaceurs auto-immolables.De plus, si ces espaceurs ont été introduits pour dépasser les limitations des stratégies préexistantes, ils ne sont pas toujours aptes à répondre à certaines problématiques particulières (sélectivité et sensibilité de leurs activations notamment) ; ce qui nous a amené à proposer une nouvelle génération d’espaceurs auto-immolables capable de mieux répondre à ces attentes.Nos travaux ont permis de comparer la cinétique d’espaceurs cyclisants et de confirmer que les espaceurs basés sur un mécanisme d’élimination avaient une gamme plus étendue d’utilisations potentielles.Après avoir établi ce constat, nous avons développé des dérivés d’espaceurs reposant sur ce principe. Pour des utilisations particulières, deux séries ont été étudiées : - Les dérivés d’aniline bi-activables : ceux-ci ne libérant le groupement partant qu’après 2 stimuli spécifiques (contre un seul jusqu’à présents, tous types d’espaceurs considérés), nous pensons que cette nouvelle classe d’espaceurs pourra constituer une réelle innovation en terme de sélectivité, étant capable de mener à la libération de la molécules d’intérêt après 2 conditions. - Un dérivé triantenné : celui-ci étant capable de libérer la molécule qu’il porte par 3 voies d’éliminations, nous avons supposé qu’il serait bien plus sensible qu’un composé ne pouvant libérer que par une voie unique. Même si le composé n’a pu être obtenu, des avancées significatives ont eu lieu quant à sa synthèse : les résultats obtenus et l’intérêt qu’ils suscitent nous ont amené à proposer d’autres stratégies de synthèse pour aboutir à la création de cet espaceur ultra-sensible. / Originally introduced by Katzenellenbogen in 1981 , self-immolative spacers are defined as covalent assemblies that are able to correlate cleavage of two chemical bonds. First, the protecting group is cleaved, generating an intermediary which spontaneously leads to the rupture of the bond between the spacer and the released molecule (bioactive compound for instance). Katzenellenbogen planned that self-immolative spacers could allow to overcome limitations of classic therapies (especially direct administration of drugs) and constitute a novel and efficient alternative to actual prodrug strategies. Effectively, spacers have opened many possibilities in this field, but also in other domains (like analytical chemistry, material sciences, …) which will be presented in this manuscript.We also took care to detail self-immolation mechanisms (the step leading to the release of the leaving group from the intermediary): indeed, the mechanism is the most important factor of the spacer, determining its properties (kinetic of the process, chemical links allowed). Therefore, it is crucial to determine advantages and drawbacks of each mechanism in order to permit a rational choice of the spacer depending on the application we choose.Our work consisted to complete known kinetic data, leading us to acquire an overview of existing spacers.Self-immolative spacers have been introduced to overcome limits of actual strategies, but they are not always able to answer particular problems (sensitivity and selectivity of their triggering events principally): this leads us to propose a new generation of spacers capable of resolving these problematics.Our researches permitted us to compare kinetic of cyclizing spacers and to confirm that elimination based spacers show a larger scope for potential uses.Starting from this, we developed two series of derivatives using this mechanism: - Bi-triggered anilines: releasing the leaving group after two specific stimuli (only one for reported spacers actually). We are convinced that this new class of spacers can constitute a real innovation for selective treatments. - Three-branched phenol: able to release the compound by three different ways of elimination. This property can increase drastically the sensitivity of the spacer for its activation pathway, considering triggers are three-time more numerous. Even if the compound has not been obtained, significant results in its synthesis have been observed: these results on this interesting project leading us to propose new synthetic strategies in order to obtain this ultra-sensitive compound.

No description available.

Plant-feeding mites represent major pests in agriculture that are of importance to crops world-wide, as large populations of mites reduce the quality and quantity of yields. Alternatives to the use of pesticides are needed due to their negative effects and bio-control agents (predatory mites) remain advantages as they suppress spider mites and other plant pests. This study aims to determine species status of plant-feeding and predatory mites on plants of the family Solanaceae and to apply morphological and molecular data to determine phylogenetic relationships among economically important Phytoseiidae, Stigmaeidae and Tetranychidae. The material for this study was collected through plant beating and specimens were preserved in 75% and 96% ethanol respectively and mounted in Heinz’s PVA medium on microscope slides. A survey was conducted during peak seasons to provide enough samples of pest and predatory species. Morphological analysis was performed and initial results indicate that 94% of the species identified were parasitic and 6% were predatory, which led to a predator:prey ratio of 1:17, where Tetranychus evansi Baker & Pritchard had the highest frequency of appearance. A modified Qiagen DNeasy tissue kit extraction protocol was used and Polymerase Chain Reaction was performed to amplify ribosomal ITS and mitochondrial COI gene fragments. The nucleotide sequence of a 700-bp fragment for ITS was determined by direct sequencing as well as for a 700-bp and 800-bp fragments for COI. The resulting data included 4 isolates that corresponded morphologically and molecularly with Phytoseiidae and 10 with Stigmaeidae. The phylogenetic trees agreed with the morphological data. For species that lack morphological descriptions in GenBank and are not placed within expected clades, one has to accept the possibility of miss identification and highlights the need to combine morphological and molecular approaches to guarantee solid species diagnosis. Ultimately, Solanaceae contain various parasitic mites, but predators seem low in numbers. This could be problamatic in finding effective bio-control agents. / MSc (Zoology), North-West University, Potchefstroom Campus, 2015

Plant-feeding mites represent major pests in agriculture that are of importance to crops world-wide, as large populations of mites reduce the quality and quantity of yields. Alternatives to the use of pesticides are needed due to their negative effects and bio-control agents (predatory mites) remain advantages as they suppress spider mites and other plant pests. This study aims to determine species status of plant-feeding and predatory mites on plants of the family Solanaceae and to apply morphological and molecular data to determine phylogenetic relationships among economically important Phytoseiidae, Stigmaeidae and Tetranychidae. The material for this study was collected through plant beating and specimens were preserved in 75% and 96% ethanol respectively and mounted in Heinz’s PVA medium on microscope slides. A survey was conducted during peak seasons to provide enough samples of pest and predatory species. Morphological analysis was performed and initial results indicate that 94% of the species identified were parasitic and 6% were predatory, which led to a predator:prey ratio of 1:17, where Tetranychus evansi Baker & Pritchard had the highest frequency of appearance. A modified Qiagen DNeasy tissue kit extraction protocol was used and Polymerase Chain Reaction was performed to amplify ribosomal ITS and mitochondrial COI gene fragments. The nucleotide sequence of a 700-bp fragment for ITS was determined by direct sequencing as well as for a 700-bp and 800-bp fragments for COI. The resulting data included 4 isolates that corresponded morphologically and molecularly with Phytoseiidae and 10 with Stigmaeidae. The phylogenetic trees agreed with the morphological data. For species that lack morphological descriptions in GenBank and are not placed within expected clades, one has to accept the possibility of miss identification and highlights the need to combine morphological and molecular approaches to guarantee solid species diagnosis. Ultimately, Solanaceae contain various parasitic mites, but predators seem low in numbers. This could be problamatic in finding effective bio-control agents. / MSc (Zoology), North-West University, Potchefstroom Campus, 2015

This thesis is based around examination of three mainstream inhaled drugs Formoterol, Budesonide and Beclomethasone for treatment of asthma and COPD. The areas investigated are these which have been raised in reports and studies, where there are concern, for drug use and assessment of their use. In reporting this work the literature study sets out a brief summary of the background and anatomy and physiology of the respiratory system and then discuses the mechanism of drug deposition in the lung, as well as the methods of studying deposition and pulmonary delivery devices. This section includes the basis of asthma and COPD and its treatment. In addition, a short section is presented on the role of the pharmacist in improving asthma and COPD patient's care. Therefore the thesis is divided into 3 parts based around formoterol, budesonide and beclomethasone. In the first case the research determines the in-vitro performance of formoterol and budesonide in combination therapy. In the initial stage a new rapid, robust and sensitive HPLC method was developed and validated for the simultaneous assay of formoterol and the two epimers of budesonide which are pharmacologically active. In the second section, the purpose was to evaluate the aerodynamic characteristics for a combination of formoterol and the two epimers of budesonide at inhalation flow rates of 28.3 and 60 L/min. The aerodynamic characteristics of the emitted dose were measured by an Anderson cascade impactor (ACI) and the next generation cascade impactor (NGI). In all aerodynamic characterisations, the differences between flow rates 28.3 and 60 were statistically significant in formoterol, budesonide R and budesonide S, while the differences between ACI and NGI at 60 were not statistically significant. Spacers are commonly used especially for paediatric and elderly patients. However, there is considerable discussion about their use and operation. In addition, the introduction of the HFAs propellants has led to many changes in the drug formulation characteristics. The purpose of the last section is to examine t h e performance of different types of spacers with different beclomethasone pMDIs. Also, it was to examine the hypothesis of whether the result of a specific spacer with a given drug/ brand name can be extrapolated to other pMDIs or brand names for the same drug. The results show that there are different effects on aerodynamic characterisation and there are significant differences in the amount of drug available for inhalation when different spacers are used as inhalation aids. Thus, the study shows that the result from experiments with a combination of a spacer and a device cannot be extrapolated to other combination.

The objective of this thesis research is to improve our understanding of the flow obstacle effect on heat transfer at supercritical and high subcritical pressures by experimentally studying the effect of different obstacles on heat transfer in two vertical upward-flow test sections: a 3-rod bundle and an 8 mm ID tube. The heat transfer measurements cover the region of interest of the Canadian Super-critical Water Cooled Reactor (SCWR). A thorough analysis of the obstacle effect on supercritical heat transfer (SCHT) was performed. In the 3-rod bundle, two types of obstacles were employed: wire wraps and low-impact grid spacers. Wire wraps were found to be more effective than grid spacers to enhance the SCHT. In the tubular test section, obstacles appeared to suppress the heat transfer deterioration (HTD) or decrease its severity; obstacles also generally enhanced the SCHT both in the liquid-like and the gas- like region. The experiment in the tubular test section revealed that, at certain flow conditions (low mass flux, low inlet subcooling), flow obstacles can have an adverse impact on the SCHT. A criterion to predict the onset of this adverse effect was developed. At high subcritical pressures, obstacles increased the CHF and reduced the maximum post-CHF temperature. A comparison of the experimental data with prediction methods for the SCHT, single phase heat transfer, CHF and post-dryout heat transfer was performed. Lastly, a new correlation to predict the enhancement in SCHT due to obstacles was developed for heat transfer in the liquid-like and gas-like regions.

This thesis is based around examination of three mainstream inhaled drugs Formoterol, Budesonide and Beclomethasone for treatment of asthma and COPD. The areas investigated are these which have been raised in reports and studies, where there are concern, for drug use and assessment of their use. In reporting this work the literature study sets out a brief summary of the background and anatomy and physiology of the respiratory system and then discuses the mechanism of drug deposition in the lung, as well as the methods of studying deposition and pulmonary delivery devices. This section includes the basis of asthma and COPD and its treatment. In addition, a short section is presented on the role of the pharmacist in improving asthma and COPD patient¿s care. Therefore the thesis is divided into 3 parts based around formoterol, budesonide and beclomethasone. In the first case the research determines the in-vitro performance of formoterol and budesonide in combination therapy. In the initial stage a new rapid, robust and sensitive HPLC method was developed and validated for the simultaneous assay of formoterol and the two epimers of budesonide which are pharmacologically active. In the second section, the purpose was to evaluate the aerodynamic characteristics for a combination of formoterol and the two epimers of budesonide at inhalation flow rates of 28.3 and 60 L/min. The aerodynamic characteristics of the emitted dose were measured by an Anderson cascade impactor (ACI) and the next generation cascade impactor (NGI). In all aerodynamic characterisations, the differences between flow rates 28.3 and 60 were statistically significant in formoterol, budesonide R and budesonide S, while the differences between ACI and NGI at 60 were not statistically significant. Spacers are commonly used especially for paediatric and elderly patients. However, there is considerable discussion about their use and operation. In addition, the introduction of the HFAs propellants has led to many changes in the drug formulation characteristics. The purpose of the last section is to examine t h e performance of different types of spacers with different beclomethasone pMDIs. Also, it was to examine the hypothesis of whether the result of a specific spacer with a given drug/ brand name can be extrapolated to other pMDIs or brand names for the same drug. The results show that there are different effects on aerodynamic characterisation and there are significant differences in the amount of drug available for inhalation when different spacers are used as inhalation aids. Thus, the study shows that the result from experiments with a combination of a spacer and a device cannot be extrapolated to other combination.