A conexão de geradores distribuídos nas redes de subtransmissão e de distribuição de energia elétrica se mostra cada vez mais crescente devido aos inúmeros benefícios técnicos e econômicos alcançados com essa tecnologia. No entanto, há importantes implicações técnicas que precisam ser analisadas antes que um gerador distribuído seja conectado em paralelo ao sistema elétrico. Um aspecto a ser analisado, e que é comum entre as concessionárias de energia elétrica é a adequação da proteção anti-ilhamento, a qual tem a função de detectar essa condição e, automaticamente, desconectar os geradores distribuídos, dentro de um tempo pré-determinado, e assim mantê-los até que o fornecimento de energia seja restabelecido. Neste contexto, este trabalho analisará o desempenho dos relés de proteção anti-ilhamento em face de diferentes tipos de cargas que acabam afetando o tempo de detecção do ilhamento. Com isso, pretende-se obter subsídios para que os ajustes desses relés sejam calculados de forma eficiente. Os relés estudados são o relé de sub/sobrefrequência e o relé de taxa de variação da frequência, e o gerador distribuído é do tipo síncrono equipado com controle de tensão. As análises mostraram que no instante em que ocorre um ilhamento os fatores que mais influenciam no desempenho dos relés de proteção anti-ilhamento são as condições de carga e geração, tempo de detecção estabelecido, tipo do relé adotado, ajuste do mesmo e modelo de carga utilizado. / The connection of distributed generators to power subtransmission and distribution networks has been increasing recently due to the technical and economic benefits that such technology can provide. However, there are important technical issues that need to be carefully analyzed before a distributed generator is connected to electrical systems. One issue to be analyzed, which is common sense among utility companies, is the anti-islanding protection, whose main goal is to detect unintentional islanding and, automatically, disconnect the distributed generators within a required time-interval. In this context, this work will analyze the performance of anti-islanding protection relays in face of different load types. With this study, one intend to get support for adjusting these relays efficiently. The relays studied in this work are the under/over frequency and the rate of change of frequency relays, and the distributed generator is a synchronous machine equipped with an automatic voltage regulator. The analyzes showed that the moment a islanding occurs the most important factors influencing the performance of relays anti-islanding protection are the conditions of load and generation, detection time set, type and relay setting adopted and load model.

Os campos magnéticos estáticos interferem com o sistema nervoso central lesado, modificando a atividade de diferentes estruturas e recuperando o comportamento afetado pela lesão. Esse trabalho tem por objetivo investigar os efeitos dos polos magnéticos em ratos Wistar saudáveis e as repercussões comportamentais no Labirinto em Cruz Elevado (LCE) induzidas por pentilenotetrazol (PTZ) e por Alprazolam (ALP) sob o efeito da estimulação magnética. EXPERIMENTO I - Foram utilizados 107 ratos albinos Wistar, machos, pesando entre 270 - 300g. Após quatro dias da implantação de um magneto (3200 Gauss) no crânio dos animais, esses foram submetidos à avaliação comportamental no LCE. Grupos injetados receberam, via intraperitoneal, 30 mg/kg de PTZ ou salina. Os dados obtidos foram analisados por ANOVA, as significâncias foram evidenciadas pelo pós-teste de Holm Sidak com valor de P significativo<0,05. Observamos diminuição no número de entradas nos braços abertos nos grupos PN, PTZ e SMPTZ em relação ao grupo C, e um aumento nas entradas do grupo PSPTZ sobre os grupos PTZ e SMPTZ (F6, 158= 1,91). Análise etológica revelou um aumento da apresentação do comportamento espreitar nos grupos PTZ, SMPTZ, PNPTZ, PSPTZ (F6, 79= 3,51), diminuição na apresentação dos comportamentos mergulho de cabeça (F6, 79= 2,40) e levantamentos (F6, 79= 17,64) nos grupos PN, PS, PTZ, SMPTZ, PNPTZ e PSPTZ em relação ao C. EXPERIMENTO II - Participaram 79 animais mantidos nas mesmas condições experimentais que no experimento I, injetados com Alprazolam (1mg/kg - intraperitoneal) ou salina. Observamos um aumento no número de entradas nos braços abertos nos grupos ALP e SMALP em relação ao grupo C (F6, 144= 3,53). A porcentagem de entradas nos braços abertos foi maior nos grupos ALP e SMALP em relação ao C (F6, 72= 2,41), e a porcentagem de tempo nos braços abertos foi maior no PNALP, comparado com o C (F6, 72= 3,95). A análise etológica revelou um aumento na frequência dos comportamentos mergulho de cabeça (F6, 72= 10,79) e exploração da extremidade final (F6, 72= 6,00) nos grupos ALP, SMALP e PNALP em relação ao C. Para o comportamento de levantamentos (F6, 72= 4,71) também observamos um aumento da frequência desse comportamento para os grupos ALP, SMALP e PSALP em relação ao C. No experimento I, o polo Sul conseguiu antagonizar o efeito do PTZ, na variável espaço-temporal entradas nos braços abertos, além disso, a estimulação magnética polo Norte, mimetizou o efeito do PTZ. No experimento II, ambos os polos magnéticos antagonizaram o efeito ALP na variável espaço-temporal entradas nos braços abertos. As variáveis etológicas também revelaram um antagonismo da resposta ALP, pelo polo Norte e pelo polo Sul. Dessa maneira, esse trabalho mostra através da análise comportamental no LCE que os campos magnéticos podem interferir de maneira distinta com as modificações no comportamento de ratos injetados com PTZ ou ALP / Static magnetic fields interfere with the injured central nervous system, modifying the activity of different structures and recovering the behavior affected by the lesion. The objective of this study was to investigate the effects of magnetic poles on healthy Wistar rats and the behavioral repercussions of the Penzolenotetrazole (PTZ) and Alprazolam (ALP) induction on the Elevated Plus-Maze (EPM) under the effect of magnetic stimulation. EXPERIMENT I - 107 male Wistar rats weighing between 270 and 300 g were used. After four days of implantation of a magneto (3200 Gauss) in the cranium of the animals, they were submitted to behavioral evaluation in the EPM. Injected groups received intraperitoneally 30 mg / kg of PTZ or saline. The data were analyzed by ANOVA, the significance was evidenced by the Holm Sidak post-hoc with a significant P value <0.05. We observed a decrease in the number of entrance open arms in the PN, PTZ and SMPTZ groups compared to group C, and an increase in the PSPTZ group on PTZ and SMPTZ groups (F6, 158 = 1.91). Ethological analysis showed an increase in the peeking out behavior in the PTZ, SMPTZ, PNPTZ, PSPTZ groups (F6, 79 = 3.51) and a decrease in the performance of the head dipping behavior (F6, 79= 2.40), and of rearing in PS, PTZ, SMPTZ, PNPTZ and PSPTZ in relation to C (F6, 79= 17.64). EXPERIMENT II - Participated 79 animals maintained in the same experimental conditions as in experiment I, injected with Alprazolam (1mg / kg - intraperitoneal) or saline. We observed an increase in the number of entrance into open arms in the ALP and SMALP groups compared to group C (F6, 144 = 3.53). And the percentage of open arms entries was higher in the ALP and SMALP groups than C (F6, 72 = 2.41), and the percentage of open arms time spented was higher in PNALP, compared to C (F6, 72 = 3.95). The ethological analysis revealed an increase in the frequency of head dipping behaviors (F6, 72 = 10.79) and end-arm activity (F6, 72 = 6.00) in the groups ALP, SMALP and PNALP in relation to C. Already for the rearing (F6, 72 = 4.71), we also observed an increase in the frequency of this behavior for the ALP, SMALP and PSALP groups in relation to C. In the experiment I, the South pole was able to antagonize the PTZ effect, as reported for the space-time variable in the open arms, besides the North pole magnetic stimulation, mimics the PTZ effect. In the experiment II, both magnetic poles antagonize the ALP effect in the space-time variable in the open arms. The ethological variables also revealed an antagonism of the ALP response, by the North and South poles. Thus, this work shows through the behavioral analysis in the EPM that the magnetic fields can interfere in a different way with the modifications in the behavior of injected rats with PTZ or ALP

Os Sistemas Digitais de Múltiplas Tensões exploram o conceito de dimensionamento da tensão de alimentação através da aplicação de diferentes fontes para regiões específicas do chip. Cada uma destas regiões pertence a um domínio de energia e pode ter duas ou mais configurações de voltagens. Independentemente dos distintos níveis de energia em diferentes domínios de tensão, os blocos devem processar sinais com níveis lógicos coerentes. Nestes sistemas, os Conversores de Nível (LS do inglês Level Shifters) são componentes essenciais que atuam como interfaces de escalonamento da tensão entre domínios de energia, garantindo a correta transmissão dos sinais. Com a apropriada interface de escalonamento de tensão e sua correta implementação, pode-se evitar o consumo excessivo de potência dinâmica e estática. Portanto, a concepção e implementação de conversores de nível deve ser um processo consciente que garanta o menor sobrecusto no tamanho, consumo de energia, e tempo de atraso. Neste trabalho estudam-se as principais características das interfaces de escalonamento de tensão e se introduce um conversor de tensão com eficiência energética e área reduzida, adequado para a conversão de baixo a alto nível. Apresentam-se os conversores de nível com o melhor desempenho encontrados na literatura, os quais são categorizados em dois principais grupos: Dois trilhos (Dual-rail) e Único trilho (Single-rail), de acordo ao número de linhas de alimentação necessárias. O circuito proposto foi comparado com a topologia tradicional de cada grupo, o Differential Cascode Voltage Switch (DCVS) e o conversor de Puri respectivamente. Simulações na tecnologia CMOS 130nm da IBMTM mostram que a topologia proposta requer até 93,79% menos energia em determinadas condições. Esta apresentou 88,03% menor atraso e uma redução de 39,6% no Produto Potência-Atraso (PDP), quando comparada com a topologia DCVS. Em contraste com o conversor Puri, obteve-se uma redução de 32,08% no consumo de energia, 13,26% diminuição no atraso e 15,37% inferior PDP. Além disso, o conversor de nível proposto foi o único capaz de trabalhar a 35% da tensão nominal de alimentação. / Multiple Voltage Digital Systems exploit the concept of voltage scaling by applying different supplies to particular regions of the chip. Each of those regions belongs to a power domain and may have two or more supply voltage configurations. Regardless of distinct energy levels on different power domains, the blocks shall process signals with coherent logic levels. In these systems, the Level Shifters (LS) are essential components that act as voltage scaling interfaces between power domains, guaranteeing the correct signal transmission. With the appropriate voltage scaling interface and its proper implementation, we can avoid excessive static and dynamic power consumption. Therefore, the design and implementation of level shifters should be a conscientious process and must guarantee the lowest overhead in size, energy consumption, and delay time. In this work, we study the main characteristics of voltage scaling interfaces and introduce an energy-efficient level shifter with reduced area, and suitable for low-to-high level conversion. We present the level shifters with the best performance that we found in the literature and categorize them into two main groups: Dual-rail and Single-rail, according to the number of power rails required. The proposed circuit was compared to the traditional topology of each group, Differential Cascode Voltage Switch (DCVS) and Puri’s level shifter respectively. Simulations on an IBMTM 130nm CMOS technology show that the proposed topology requires up to 93.79% less energy under certain conditions. It presented 88.03% smaller delay and 39.6% less Power-Delay Product (PDP) when compared to the DCVS topology. In contrast with the Puri’s level shifter, we obtained a reduction of 32.08% in power consumption, 13.26% smaller delay and 15.37% lower PDP. Besides, our level shifter was the only one capable of working at 35% of the nominal supply voltage.

O ensaio de simples reconhecimento de solos (SPT) é a ferramenta de investigação de solos mais utilizada no mundo. Devido ao grande número de parâmetros que influenciam os seus resultados, a medida de sua eficiência passa a ser indispensável à transposição de experiências entre as práticas desenvolvidas em diferentes locais. Infelizmente, a medida da eficiência através da instrumentação do impacto do martelo é economicamente inviável para a maioria das empresas de sondagem no Brasil. Este trabalho apresenta uma metodologia para a determinação da eficiência do SPT baseada no princípio de Hamilton e na realização de prova de carga estática sobre o amostrador, que pode ser uma alternativa para sanar esta situação. / The standard penetration test (SPT) is the most used soil investigation tool in the world. Due to the great number of variables that influences its results, the measurement of the efficiency becomes imperative to the transposition of experiences between developed practices in different places. Unfortunately, the measurement of the efficiency through the instrumentation of the hammer impact is economically inpracticable to most of the soil investigation firms in Brazil. This work presents a methodology to determinate the SPT efficiency based on the Hamilton\'s principle and on the execution of static load test over the sampler, what seems to be a good alternative to end this situation.

A conexão de geradores distribuídos nas redes de subtransmissão e de distribuição de energia elétrica se mostra cada vez mais crescente devido aos inúmeros benefícios técnicos e econômicos alcançados com essa tecnologia. No entanto, há importantes implicações técnicas que precisam ser analisadas antes que um gerador distribuído seja conectado em paralelo ao sistema elétrico. Um aspecto a ser analisado, e que é comum entre as concessionárias de energia elétrica é a adequação da proteção anti-ilhamento, a qual tem a função de detectar essa condição e, automaticamente, desconectar os geradores distribuídos, dentro de um tempo pré-determinado, e assim mantê-los até que o fornecimento de energia seja restabelecido. Neste contexto, este trabalho analisará o desempenho dos relés de proteção anti-ilhamento em face de diferentes tipos de cargas que acabam afetando o tempo de detecção do ilhamento. Com isso, pretende-se obter subsídios para que os ajustes desses relés sejam calculados de forma eficiente. Os relés estudados são o relé de sub/sobrefrequência e o relé de taxa de variação da frequência, e o gerador distribuído é do tipo síncrono equipado com controle de tensão. As análises mostraram que no instante em que ocorre um ilhamento os fatores que mais influenciam no desempenho dos relés de proteção anti-ilhamento são as condições de carga e geração, tempo de detecção estabelecido, tipo do relé adotado, ajuste do mesmo e modelo de carga utilizado. / The connection of distributed generators to power subtransmission and distribution networks has been increasing recently due to the technical and economic benefits that such technology can provide. However, there are important technical issues that need to be carefully analyzed before a distributed generator is connected to electrical systems. One issue to be analyzed, which is common sense among utility companies, is the anti-islanding protection, whose main goal is to detect unintentional islanding and, automatically, disconnect the distributed generators within a required time-interval. In this context, this work will analyze the performance of anti-islanding protection relays in face of different load types. With this study, one intend to get support for adjusting these relays efficiently. The relays studied in this work are the under/over frequency and the rate of change of frequency relays, and the distributed generator is a synchronous machine equipped with an automatic voltage regulator. The analyzes showed that the moment a islanding occurs the most important factors influencing the performance of relays anti-islanding protection are the conditions of load and generation, detection time set, type and relay setting adopted and load model.

Submitted by Jorge Silva (jorgelmsilva@ufrrj.br) on 2018-11-12T17:56:54Z No. of bitstreams: 1 2013 - N?bya Dalvi Calabrez.pdf: 2204521 bytes, checksum: 71b05e242a3884d827606854f30c0359 (MD5) / Made available in DSpace on 2018-11-12T17:56:54Z (GMT). No. of bitstreams: 1 2013 - N?bya Dalvi Calabrez.pdf: 2204521 bytes, checksum: 71b05e242a3884d827606854f30c0359 (MD5) Previous issue date: 2013-08-23 / CAPES / Petrobras / Filtration and invasion of drilling fluids are phenomena that occur during the process of drilling oil wells. It is necessary to know the filter cake behavior, which is formed in order to prevent unwanted invasion of filtrate, which can cause irreversible damage for the reservoir rock, making impossible the well to produce oil. The goals of this work were: to study filtration and invasion of drilling fluids, under static and dynamic conditions, characterize the mudcake, obtain comparative results between different fluids (water base mud and emulsion) and model static filtration. For this, experiments were conducted in a high temperature/high pressure cell filtration, using filter paper as filter medium. The cake formed from the filtration of these fluids was characterized according to parameters such as porosity, permeability, compressibility, thickness, shear strength and friction factor. In a comparison between different fluids, it was observed that the water-based mud provided a mudcake more permeable and more porous than emulsion mudcake. Thus, water-based mud allowed more filtrate passed through the filter medium. The factors relevant to the estimation of the friction factor were determined. It was concluded that the compressibility index of the filter cake was a factor which had great influence on the estimation of this parameter. The model allowed the prediction of static filtration, slowness and mudcake thickness curves as a function of time. / A filtra??o e a invas?o de fluidos de perfura??o s?o fen?menos que ocorrem durante o processo de perfura??o de po?os de petr?leo. ? necess?rio conhecer como se comporta a torta de filtra??o formada a fim de evitar invas?es indesejadas do filtrado, o que pode causar danos muitas vezes irrevers?veis a rocha reservat?rio, tornando o po?o invi?vel para a produ??o do ?leo. Os objetivos desse trabalho foram: estudar os fen?menos de filtra??o e invas?o de fluidos de perfura??o base ?gua e emuls?o, sob condi??es est?ticas e din?micas, caracterizar a torta formada, obter resultados comparativos entre diferentes fluidos (base ?gua e emuls?o) e modelar a filtra??o est?tica. Para isso, foram conduzidos experimentos em uma c?lula de filtra??o high temperature/high presssure, utilizando papel de filtro como meio filtrante. A torta formada, a partir da filtra??o desses fluidos, foi caracterizada de acordo com par?metros como: porosidade, permeabilidade, compressibilidade, espessura, resist?ncia ao cisalhamento e fator de fric??o. Na compara??o entre os resultados experimentais para diferentes fluidos, observou-se que o fluido a base ?gua, por formar uma torta mais perme?vel e mais porosa, permitiu que mais filtrado passasse pelo meio filtrante, quando comparado ao fluido base ?leo (emuls?o). Foram estudados os fatores relevantes na estima??o do fator de fric??o da torta de filtra??o e concluiu-se que a compressibilidade da torta foi um fator que teve grande influ?ncia na estima??o desse par?metro. A modelagem da filtra??o est?tica possibilitou a previs?o do comportamento das curvas de filtra??o, de slowness e da espessura da torta em fun??o do tempo.

Deep foundations such as driven piles are often used to bypass liquefiable layers of soil and bear on more competent strata. When liquefaction occurs, the skin friction around the deep foundation goes to zero in the liquefiable layer. As the pore pressures dissipate, the soil settles. As the soil settles, negative skin friction develops owing to the downward movement of the soil surrounding the pile. To investigate the magnitude of the skin friction along the shaft three driven piles, an H-pile, a closed end pipe pile, and a concrete square pile, were instrumented and used to measure soil induced load at a site near Turrell, Arkansas following blast-induced liquefaction. Measurements were made of the load in the pile, the settlement of the ground and the settlement of piles in each case. Estimates of side friction and end-bearing resistance were obtained from Pile Driving Analyzer (PDA) measurements during driving and embedded O-cell type testing. The H-pile was driven to a depth of 94 feet, the pipe pile 74 feet, and the concrete square pile 72 feet below the ground surface to investigate the influence of pile depth in response to liquefaction. All three piles penetrated the liquefied layer and tipped out in denser sand. The soil surrounding the piles settled 2.5 inches for the H-pile, 2.8 inches for the pipe pile and 3.3 inches for the concrete square pile. The piles themselves settled 0.28 inches for the H-pile, 0.32 inches for the pipe pile, and 0.28 inches for the concrete square pile. During reconsolidation, the skin friction of the liquefied layer was 43% for the H-pile, 41% for the pipe pile, and 49% for the concrete square pile. Due to the magnitude of load felt in the piles from these tests the assumption of 50% skin friction developing in the liquefied zone is reasonable. Reduced side friction in the liquefied zone led to full mobilization of skin friction in the non-liquefied soil, and partial mobilization of end bearing capacity. The neutral plane, defined as the depth where the settlement of the soil equals the settlement of the pile, was outside of the liquefied zone in each scenario. The neutral plane method that uses mobilized end bearing measured during blasting to calculate settlement of the pile post liquefaction proved to be accurate for these three piles.

The purpose of this investigation was to determine the existence of bilateral strength and force-production asymmetry and evaluate possible differences based on sex, as well as strength level. Asymmetry was assessed during weight-distribution (WtD) testing, unloaded and lightly loaded static- (SJ) and countermovement-jump (CMJ) testing, and isometric midthigh-pull (IMTP) strength testing. Subjects included 63 athletes (31 male, 32 female) for WtD, SJ, and CMJ tests, while 129 athletes (64 male, 65 female) participated in IMTP testing. Independent-samples t tests were used to determine possible differences in asymmetry magnitude between males and females, as well as between strong and weak athletes. Cohen d effect-size (ES) estimates were also used to estimate difference magnitudes. Statistically different asymmetry levels with moderate to strong ESs were seen between males and females in WtD, 0-kg SJ (peak force [PF]), 20-kg SJ (peak power [PP]), 0-kg CMJ (PF, PP, net impulse), and 20-kg CMJ (PF), but no statistical differences were observed in IMTP variables. Dividing the sample into strong and weak groups produced statistically significant differences with strong ES estimates in IMTP PF and rate of force development, and many ESs in jump symmetry variables increased. The results of this investigation indicate that females may be more prone to producing forces asymmetrically than males during WtD and jumping tasks. Similarly, weaker athletes displayed more asymmetry than stronger athletes. This may indicate that absolute strength may play a larger role in influencing asymmetry magnitude than sex.

A microgrid is a subnetwork of power system that consists of a group of distributed energy sources and loads. It is designed to integrate distributed generation, loads, energy storage devices, converters, and monitoring and protection devices. Generally, a successful microgrid could run both in island mode (off-grid) and in grid-connected mode (on-grid), being able to convert between two modes at any time. With continuous development of the power system, distributed renewable generation unit accounts for an increasing proportion, since microgrid could effectively connect these generation units to the main grid, thereby improving the energy efficiency and the energy structure. Microgrid is increasingly playing an important role in the power system. This thesis focuses on reducing the cost of microgrids through economic operation, including both static and dynamic economic operations. Three cases are tested based on these two methods. Also, each case will include four situations including one without ESS and three situations with 2MWh ESS, 3MWh ESS, 4MWh ESS, respectively.

The purpose of this thesis is to use automation to create appropriate models in PSS/E with the data from Hardware-in-Loop real-time simulations. With the increase in technology of power electronics, the use of High Voltage Direct Current Technology and Flexible Alternating Current Transmission System devices in the electrical power system have increased tremendously. Static Var Compensators are widely used and it is important to have accurate and reliable models for studies relating to power systems planning and interaction. An automation method is proposed to find the parameters of an SVC model in PSS/E with the data from the Hardware-in- loop real-time simulation of the SVC physical controller using Hypersim. The effect of the SVC on the system under steady state and fault conditions are analyzed with HIL simulation of an SVC physical controller in Hypersim and its corresponding model in PSS/E in the IEEE 14 bus system. The parameters of the SVC model in PSS/E can be effectively varied to bring its response closer to that of the response from HIL simulations in Hypersim. An error function is used as a measure to understand the extent of difference between the model and the physical controller.