Over the past few decades, supramolecular self-assembly has become an alternative synthetic tool for constructing targeted discrete molecular architectures. Among various interactions, metal-ligand coordination has attracted great attention owing to high bond enthalpy (15−50 Kcal/mol) and predictable directionality. The basic principle of metal-ligand directed self-assembly relies on the proper designing of information encoded rigid complementary building units (a transition metal based acceptor and a multidentate organic donor) that self-recognize themselves in a chemically reasonable way (depends on their bite angle and symmetry) during self-assembly process. As far as acceptor units are concerned, Pd(II) and Pt(II) metal-based cis-blocked 90° acceptors have so far been used greatly for the construction of a library of 2D/3D discrete supramolecular architectures due to their rigid square planar geometry and kinetic lability. However, in some cases the efforts to design finite supramolecular architectures using a cis-blocked 90° acceptor in combination with a bulky donor ligand were unsuccessful, which may be due to the steric demands of donor ligand. Moreover, the resulted assemblies from such cis-blocked 90° building unit are mostly non-fluorescent in nature and limit the possibility of using them as chemosensors for various practical applications. Unlike that of rigid square-planar Pt(II) and Pd(II)-metal based building blocks, the use of other transition metal-based building units for the construction of discrete nanoscopic molecular architectures are known to lesser extent, mainly because of their versatile coordination geometries. However, some of the half-sandwiched piano-stool complexes of late transition metals like Ru, Os, Ir and Rh are known to maintain the stable octahedral geometry under various reaction conditions. Moreover, the self-assembly using redox active transition metal-based building units may lead to redox active assemblies. On the other hand, symmetrical rigid donors have been widely used as the favorite choices for the purpose of constructing desired product mainly due to their predictable directionality. Flexible linkers are not predictable in their directionality during self-assembly process and thus results mostly in undesired polymeric products. Furthermore, metal-ligand directed self-assembly provides opportunity to introduce multifunctionality in a single step within/onto the final supramolecular architectures. Among various functional groups, the incorporation of unsaturated ethynyl functionality is expected to enrich the final assemblies to be π-electron-rich and the attachment of ethynyl functionality with heavy transition metal ions are known to be luminescent in nature due to the facile metal to ligand charge transfer (MLCT). Hence, the final supramolecular complexes can be used as potential fluorescence sensors for electron-deficient nitroaromatics, which are the chemical signature of most of the commercially available explosives. The main thrust of the present investigation is focused on the judicious design and syntheses of multifaceted 2D/3D supramolecular architectures of finite shapes, sizes and functionality using Pt(II)/Ru(II) based “shape-selective” organometallic building blocks and investigation of their application as chemosensors. CHAPTER 1 of the thesis presents a general review on the core concepts of self-assembly and supramolecular chemistry. In particular, it underlines the importance of metal-ligand directional bonding approach for designing a vast plethora of discrete 2D/3D supramolecular architectures with tremendous variation in topology. CHAPTER 2 describes the design and syntheses of a series of 2D metallamacrocycles using carbazole-functionalized shape-selective 90° building units. A new Pt2II organometallic 90° acceptor 3,6-bis[trans-Pt(PEt3)2(NO3)(ethynyl)]carbazole (M1) containing ethynyl functionality is synthesized via Sonagashira coupling reaction and characterized. The combination of M1 with three different flexible ditopic donors (L1−L3) afforded [2 + 2] self-assembled molecular squares (1−3), respectively [where L1 = 1,3-bis(4-pyridyl)isophthalamide; L2 = 1,3-bis(3-pyridyl)isophthalamide; L3 = 1,2-bis(4-pyridyl)ethane] (Scheme 1). Scheme 1: Schematic presentation of the formation of a series of [2 + 2] self-assembled molecular squares. An equimolar (1:1) combination of same acceptor M1 with rigid linear ditopic donors (L4-L5) yielded [4 + 4] self-assembled octanuclear molecular squares 4 and 5, respectively [L4 = 4,4’-bipyridine; L5 = trans-1,2-bis(4-pyridyl)ethylene]. Conversely, a similar reaction of M1 with an amide-based unsymmetrical linear flexible ditopic donor L6 resulted in the formation a [2 + 2] self-sorted molecular rhomboid (6a) as a single product [L6 = N-(4-pyridyl)isonicotinamide]. Despite the possibility of several linkage isomeric macrocycles (rhomboids, triangles and squares) due to different connectivity of the ambidentate linker, the formation of a single and symmetrical molecular rhomboid 6a as an exclusive product is an interesting observation. This chapter also presents the synthesis and characterization of a complementary 90° dipyridyl donor 3,6-bis(4-pyridylethynyl)carbazole (L7). Stoichiometric combination of L7 with several PdII/PtII-based 90° acceptors (M2−M4) yielded [2 + 2] self-assembled molecular “bowl” shaped macrocycles (7−9) respectively, in good yields [M2 = cis-(dppf)Pd(CF3SO3)2; M3 = cis-(dppf)Pt(CF3SO3)2; M4 = cis-(tmen)Pd(NO3)2]. All these newly synthesized macrocycles were characterized by various spectroscopic techniques and molecular structures of some of them were confirmed by single crystal X-ray diffraction analysis. In addition to their syntheses and characterization, fluorescence chemosensing ability for various analytes was investigated. Macrocycle 1 is a system composed of amide-based receptor units and carbazole-based fluorophore moieties. The fluorescence study of 1 elicited a dramatic enhancement in the fluorescence intensity upon gradual addition of P2O74- anion in DMF/H2O solvent mixture, whereas similar titration under identical condition with other anions like F-, ClO4-, and H2PO4- did not show such change. Hence, molecular square 1 can be used as selective fluorescence sensor for pyrophosphate (P2O74-) anion. Due to their extended π-conjugation, macrocycles 3-4 were used as fluorescence sensors for electron-deficient nitroaromatics, which are the chemical signatures of many commercially available explosives. The fluorescence study showed a marked quenching of initial fluorescence intensity of the macrocycles(3-4) upon gradual addition of picric acid (PA) and they exhibited large fluorescence quenching responses with high selectivity for nitroaromatics among various other electron deficient aromatic compounds tested. As macrocycle 7 has large concave aromatic surface, it was utilized as a suitable host for large convex guest such as fullerene C60. The fluorescence quenching titration study suggested that macrocycle 7 forms a stable ~1:1 host-guest complex with C60 and the calculated association constant (KSV) is 1.0 × 105 M-1. CHAPTER 3 presents two-component coordination-driven self-assembly of a series of [2 + 2] molecular rectangles and a [2 + 4] self-assembled molecular tetragonal prism. An equimolar combination of pre-designed linear PtII2-acceptors M5−M6 separately with three different “clip” donors (L2, L8−L9) led to the formation of [2 + 2] self-assembled tetranuclear cationic molecular rectangles (10−15), respectively [M5 = 1,4-bis[trans-Pt(PEt3)2(NO3)(ethynyl)] benzene; M6 = 4,4’-bis[trans-Pt(PEt3)2(CF3SO3)(ethynyl)]biphenyl; L8 = 1,3-bis(3-pyridyl)ethynylbenzene; L9 = 1,8-bis(4-pyridyl)ethynylanthracene]. Rectangles 10-15 showed strong fluorescence in solution owing to their extended π-conjugation. Amide-functionalized rectangle 10 was used as a macrocyclic receptor for dicarboxylic acids. Solution state fluorescence study showed that rectangle 10 selectively binds (KSV = 1.4 × 104 M-1) with maleic acid by subsequent enhancement in emission intensity and addition of other analogous aliphatic dicarboxylic acids such as fumaric, succinic, adipic, mesaconic and itaconic acids causes no change in the emission spectra; thereby demonstrated its potential use as macrocyclic receptor in sensor applications. Since rectangle 15 is enriched with π-conjugation, it was examined as a fluorescence sensor for electron-deficient nitroaromatics such as picric acid, which is often considered as a secondary chemical explosive. The fluorescence study of 15 showed a significant quenching of initial emission intensity upon titrating with picric acid (PA) and it exhibited the largest fluorescence quenching response with high selectivity for picric acid. Scheme 2: Schematic representation of formation of [2 + 4] self-assembled of molecular tetragonal prism. This chapter also describes two-component coordination [2 + 4] self-assembly of a pyrene-based PtII8 tetragonal prism (16) as shown in Scheme 2, using a newly designed tetratopic organometallic acceptor (M7; 1,3,6,8-tetrakis[trans-Pt(PEt3)2(NO3)(ethynyl)]pyrene) in combination with an amide-based “clip” donor (L2) and propensity of this prism (16) as a selective fluorescence sensor for nitroaromatic explosives has been examined both in solution as well as in thin-film. CHAPTER 4 reports the synthesis and structural characterization of a series of Ru(II)-based bi-and tetra-nuclear metallamacrocycles and hexanuclear trigonal prismatic cages. In principle, the self-assembly of a “clip” acceptor with an asymmetrical ditopic donor is expected to give two different linkage isomeric (head-to-tail and head-to-head) molecular rectangles because of different bond connectivity of the donor. However, the equimolar combination of half-sandwiched p-cymene binuclear Ru(II)-based “clip” acceptors (M8−M9) and an amide-based ambidentate donor (L6) resulted in the self-sorting of single linkage (head-to-tail) isomeric rectangles 17−18 as only products, respectively [M8 = [Ru2(μ-η4-C2O4)(MeOH)2(η 6-p-cymene)2](CF3SO3)2; M9 = [Ru2(μ- η4-C6H2O4)(MeOH)2(η 6-p-cymene)2](CF3SO3)2]. Molecular structures of these head-to-tail linkage isomeric rectangles were unambiguously proved by single crystal X-ray diffraction analysis. Likewise, the self-assembly of oxalato-bridged Ru(II) acceptor M8 with a rigid dipyridyl “clip” donor L8 yielded a tetranuclear cationic pincer complex 19, while a similar reaction of M8 with an anthracene-functionalized “clip” donor L9 having shorter distance (between their reactive sites) compared to L8 led to the formation of [1 + 1] self-assembled macrocycle 20. This chapter also represents the design and synthesis of two hexanuclear trigonal prismatic cages (21−22) from the self-assembly of a π-electron rich tripyridyl donor (L10; 1,3,5-tris(4-pyridylethynyl)benzene) in combination with binuclear acceptors M8 and M9, respectively (Scheme 3). Formation of these prismatic cages was initially characterized using various spectroscopic techniques and the molecular structure of oxalato-bridged prism 21 was confirmed by single crystal X-ray diffraction analysis. In addition to the structural characterization, the pincer complex 19 and trigonal prismatic cages 21−22 were used as fluorescence sensors for nitroaromatic explosives owing to their large internal porosity and their π-electron rich nature. Scheme 3: Schematic representation of the formation of [3 + 2] self-assembled trigonal prismatic cage. CHAPTER 5 covers the syntheses of a few discrete metallamacrocycles using flexible imidazole/carboxylate based donors instead of much widely employed polypyridyl donors. The metal-ligand directed self-assembly of oxalato-bridged acceptor M8 and an imidazole-based tetratopic donor (L11; 1,2,4,5-tetrakis(imidazol-1-yl)benzene) in methanol afforded [2 + 1] self-assembled tetranuclear macrocycle 23. Conversely, the similar combination of L11 with 2,5-dihydroxy-1,4-benzoquinonato-bridged binuclear complex (M9) in 1:2 molar ratio in methanol resulted in an octanuclear cage 24. Both the complexes (23−24) were isolated as their triflate salts in high yields and were characterized by various spectroscopic methods including single crystal X-ray diffraction analysis. Scheme 4: Schematic representation of formation of an octanuclear incomplete Ru(II) open prism via ruthenium-oxygen coordination driven self-assembly. This chapter also explains the self-sorting of an unusual octanuclear incomplete prism [Ru8(η6-p-cymene)8(tma)2(μ-η4-C2O4)2(OMe)4](CF3SO3)2 (25) via ruthenium-oxygen coordination driven self-assembly of building block M8 and sodium benzene-1,3,5-tricarboxylate (L12) (Scheme 4). Electronic absorption study indicated that prism 25 exhibited a remarkable shape-selective binding affinity for 1,3,5-trihydroxybenzene (phluoroglucinol) via multiple hydrogen bonding interactions and such shape-selective binding was confirmed by single crystal X-ray diffraction analysis. (For figures pl see the abstract file)

Nature has always remained a constant source of inspiration for chemists for synthesizing natural products, mimicking enzymatic reactions or to construct molecular architectures resembling biological assemblies. With the rapid growth of ‘Supramolecular Chemistry’ along with the advancement of the synthetic methodologies, molecular systems with brand new complexities have been synthesized, alongside the efficacy of weak, reversible non-covalent interactions have also been extensively explored. A number of such forces including hydrogen bonding, solvophobic effect, dynamic covalent interactions and metal-ligand coordination have been exploited to assemble the molecular building blocks and stitch them together to construct discrete ‘self-assembled’ architectures integrated with desired functionalities. Metal-ligand coordination driven self-assembly certainly evolved as one of the most successful approaches for the construction of discrete supramolecular architectures during last two and half decades. The high directionality and reversible nature of certain metal-ligand bonds allow the pre-designing of sophisticated architectures which can be successfully obtained by ‘error corrections’ via a thermodynamically controlled self-assembly process. Numerous aesthetically elegant two dimensional (2D) and three dimensional (3D) metallosupramolecular architectures have been constructed which have been studied for various potential applications including guest encapsulation, catalysis, sensing, optoelectronics, drug delivery, protection of reactive species etc. Construction of such molecular architectures uses symmetric and rigid building blocks which strictly preserves their geometrical coding and thus finally determines the fate of the self-assembly. Pyridyl-based donors have been extensively used due to their well-behaved coordination with transition metal ions. Interestingly, imidazole based donors remained almost unexplored for such purpose mainly due to the rotational flexibility of imidazole moieties owing to the lack of -electron delocalization with the aromatic backbone, which makes pre-designing an architecture extremely difficult. However, this unpredictability can lead to the formation of unprecedented molecular architectures. Furthermore, the conventional rigid ‘acceptors’ used in the ‘directional bonding approach’ always results in the formation of rigid assemblies, which cannot be utilized for the construction of smart molecular machine based applications. In this context, incorporation of restricted rigidity in the building blocks can be a convenient approach to construct versatile and flexible supramolecular architectures. Although flexible donors are quite common in coordination-driven self-assembly, the use of flexible metal acceptor is scarcely Highly symmetric spherical assemblies of square planer Pd(II) and Pt(II) ions are one of the most extensively studied metallosupramolecular architectures owing to their topological similarity with the spherical virus capsids. Unfortunately, none of the reported molecular spheres are soluble in water which restricts their applications in aqueous media. On the other hand, most of the metallosupramolecular architectures cannot be used for redox based applications as the oxidation state of the associated metal ions must be kept unaltered. Although, assemblies constructed mainly by the ferrocene containing acceptors are shown to be exhibiting redox property, the donor inherited redox active metallosupramolecular systems are extremely rare. Discrete 3D metallosupramolecular cages have been extensively studied as synthetic hosts where the hydrophobic pockets have been utilized as safe shelter for reactive species, for catalyzing chemical transformations, tuning electronic and optical properties of guest molecules, as delivery vehicle for drug molecules etc. However, a major drawback of many such 3D cages is associated with their closed-shell topology, where the large cavities are accessible though relatively much smaller apertures which prevent larger guest molecules to enter inside. So, an interesting finding in this field would be to construct molecular hosts with larger apertures. Picric acid (PA) is a strong organic acid and like many other polynitroaromatic compounds, it is a powerful explosive. In addition, it has large scale industrial application for the synthesis of dyes and pharmaceuticals. However, PA has potential health hazards and it is a water pollutant owing to its high aqueous solubility. Thus, the development of selective receptors which can efficiently interact with PA and detect it at very lower concentration is an appealing field of research. Chapter 1 briefly discusses the history of supramolecular chemistry and the concept of ‘self-assembly’ along with the several synthetic methodologies for the construction of discrete supramolecular architectures. It also includes a brief discussion on the various design approaches to construct 2D and 3D molecular architectures by metal-ligand coordination which is followed by an account on some of the important applications of such metallosupramolecular architectures. At the end, a small introduction on the fluorescence-based detection techniques for PA has also been included. Chapter 2A accounts for the exploration of two linearly substituted benzene bisimidazole donors L1 and L2 for coordination-driven self-assembly. L1 and L2 possesses different ‘natural’ donor angles as the imidazole moieties in L2 are twisted heavily with respect to the phenyl plane due to the steric hindrance exerted by the methyl groups. Interestingly, while the self-assembly of L1 with [cis-(tmeda)Pd(NO3)2] (tmeda = N,N,Nꞌ,Nꞌ-tetramethylethane-1,2-diamine) exclusively formed a [3+3] molecular triangle, the self-assembly of L2 yielded a [4+4] molecular square as the major product with the same acceptor. In addition, similar treatment with the analogous Pt(II) acceptor resulted mixtures of [3+3] and [4+4] assemblies in both cases; however, the [3+3] assembly was the major product in case of L2. These contradictory product distributions in case of L2 with analogous Pd(II) and Pt(II) acceptors could be corroborated by the delicate balance between the entropic and enthalpic contributions. Scheme 1. Self-assembly of L1/L2 with [cis-(tmeda)Pd(NO3)2] and [cis-(tmeda)Pt(NO3)2], respectively. Furthermore, the reactions of L1 and L2 with a 0º bisplatinum acceptor, viz. AntPt yielded the expected [2+2] macrocycles (8 and 9), respectively. However, the interesting observations Scheme 2. Self-assemblies of L1 and L2 with the 0º bisplatinum acceptor AntPt. obtained from the variable temperature NMR studies suggested the existence of a mixture of inter-convertible conformational isomeric structures of 9. Chapter 2B describes the synthesis of a novel semi-rigid bisplatinum acceptor bisPt-NO3 based on benzil backbone for the construction of flexible metallamacrocycles. The benzil group was selected due to its unique rotational flexibility along the benzyl C-C bond which can generate a wide range of bite angles to make it compatible with the variety of donors of diverse shapes and sizes. The acceptor was successfully self-assembled with four different bisimidazole donors (L1-L4) to yield corresponding [2+2] metallamacrocycles (M1-M4) which were characterized by multinuclear NMR and ESI-MS spectrometry; and their structures were elucidated by semi-empirical geometry optimizations. Scheme 3. Self-assembly of [2+2] metallamacrocycles M1-M4 by a semi-rigid bisplatinum acceptor bisPt-NO3. Chapter 3 discusses the synthesis of the very first example of a water soluble molecular sphere MC-1 by the self-assembly of square planar Pd(II) ions with a flexible cationic tritopic donor La(NO3)3 containing 4,4-bispyridyl arms. The structural flexibility of La(NO3)3 makes it capable of binding with metal ions in its syn- or anti-conformations which was also experimentally observed in the structures of the three newly synthesized coordination polymers, viz. Ag-CP, Zn-CP and Cd-CP constructed by using La(NO3)3 as (co)ligand. Finally, the 4:3 self-assembly of [La(NO3)3] and Pd(NO3)2 in aqueous media produced the desired M6L8 type Scheme 4. Self-assembly of the water soluble molecular dice MC-1 from the tricationic tritopic donor La(NO3)3. molecular sphere- MC-1, which contain 36+ overall charges. The compound could be easily solubilized in water after isolation as solid by simple stirring at room temperature. Single crystal X-ray diffraction analysis (SCXRD) revealed the ‘dice’-shaped architecture of MC-1 where the eight faces are occupied by the coordinated Pd2+ ions and the bispyridyl arms and the vertices are occupied by mesityl moieties. MC-1 is stable in aqueous media, however disintegrates in DMSO, as observed by variable temperature NMR experiments. In addition, MC-1 also produced ligand inherited redox signals in cyclic voltammetry experiments. Chapter 4 describes the synthesis of a novel non-symmetric tetraimidazole donor L based on carbazole backbone. The complexity of the donor is associated with the allowed free rotation of the imidazole moieties along with the non-symmetric nature of the carbazole backbone which make L a very unusual donor for coordination-driven self-assembly. The crystal structure of L showed that the presence of the N-Me group caused a greater twisting of the nearby imidazole moieties with respect to the other set of imidazole moieties. The self-assembly of L with [cis-(en)Pd(NO3)2] (en = ethane-1,2-diamine) yielded a mixture of M4L8 and M6L12 type self-assembled products, as evidenced from the ESI-MS spectrometry. However, the DOSY NMR spectra of the product showed a single diffusion coefficient for all the peaks, indicating that both type of assemblies have similar size and hence suggested the formation of a tetrafacial barrel and a cubic architecture. A similar self-assembly of L with [cis-(tmeda)Pd(NO3)2] also produced a water soluble product. ESI-MS spectra in this case only confirmed the formation of a M4L8 assembly- MB-1. SCXRD analysis of the coronene encapsulated complex of MB-1 gave more insights on the sophisticated non-symmetric tetrafacial barrel architecture of MB-1 with large Scheme 5. Construction of the water soluble molecular barrel MB-1 by the self-assembly of a non-symmetric tetraimidazole donor L. rectangular apertures. The centrosymmetric molecule can encapsulate two aromatic guest molecules inside its hydrophobic cavity and was found to be efficiently encapsulating polyaromatic hydrocarbons (PAHs) in aqueous media. In addition, MB-1 has been successfully exploited to carry water insoluble perylene molecule inside HeLa cells for fluorescence imaging purpose without showing significant toxicity. L also formed a water insoluble tetrafacial barrel (MB-2) by self-assembly with [cis-(dppf)Pd(OTf)] (dppf=diphenylphosphino ferrocene) which interestingly has a symmetrical architecture, as evidenced from the SCXRD analysis. The formation of the symmetrical barrel is driven by the steric hindrance between the bulky phenyl groups of the nearby dppf moieties. Chapter 5 reports the study of interactions between picric acid (PA) with a few newly synthesized fluorescent imidazolium salts (S1-S3). The fluorescence titration study of the positively charged receptors with PA showed rapid decrease of the corresponding fluorescence intensities upon gradual addition of PA. The Stern-Volmer plots suggested the involvement of both static and dynamic quenching mechanisms which was further supported by fluorescence lifetime measurements, NMR and UV-Vis spectroscopic analyses. The values of the Stern-Volmer constants (Ksv) reflected strong receptor-PA binding. The quenching efficiency calculations in the presence of several other analytes proved that the receptors are highly selective for PA in both aqueous and non-aqueous media. The mode of interactions in solid state was investigated by the crystal structure analysis of the [S1PA] complex. 1H NMR spectra of the same complex indicated strong interaction between the imidazolium moieties of the receptor Scheme 6. The fluorescent imidazolium salts based receptors S1-S3 and the florescence titration plot for S1 with PA. Inset: the solutions of S1 and (S1+PA) in DMSO under UV light. with PA in solution; however, no significant interaction of PA with the anthracene moieties was observed in solution as we well as in the solid state. Also the quenching efficiencies and the Ksv values were correlated with the positive charge(s) present on the receptors with the help of two newly synthesized mono-positive receptors S4 and S5.

No description available.

Ce travail réalisé dans le cadre de l’initiative africaine de l’IUCr porte sur l’étude structurale par diffraction des rayons X de quelques architectures élaborées par association, via des interactions faibles, des anions {[M(C2O4)3]3-,M = Cr, Fe} et des cations complexes à base de la 2-picolylamine (amp) métaux de transition (Co2+, Cu2+ et Mn2+). L’architecture à base de l’ion Co2+ est bidimensionnelle et présente des feuillets ondulés constitués de chaines bimétalliques de chiralité différente où les deux ions complexes ([Cr(C2O4)3]3- et [Co(amp)3]3+ ) sont connectés par des liaisons hydrogène. Ces feuillets hébergent des molécules d’eau qui forment des clusters dodécamèriques aux caractéristiques nouvelles. Le composé déshydraté se réhydrate rapidement dans l’air ambiant et les deux états possèdent des couleurs différentes. Plusieurs cycles de déshydratation-réhydratation n’altèrent pas la qualité cristalline du composé. L’architecture à base des ions Cu2+ possède également des feuillets mais présente une ondulation plus forte que celle de l’architecture au cobalt. Ces couches sont constituées de chaines formées de cations dimériques [Cu2(amp)4Cl]3+ et d’anions {[M(C2O4)3]3-,M = Cr, Fe}. Les deux composés sont iso-structuraux et leur architecture présente des canaux monodimensionnels qui contiennent des molécules d’eau qui forment des clusters hexamèriques. Le composé subit des transitions de phase entre la basse température (100K) et la température de déshydratation (341K) avec une perte de la symétrie. Le composé se réhydrate plus difficilement que celui à base de l’ion cobalt(III). L’ion Mn2+ ne donne pas l’architecture escomptée mais un polymère de coordination nouveau / This work, realized under the IUCr initiative, framework involves the structural study via X-ray diffraction, of some heteromolecular architectures formed by the association through non-covalent bonds, between the tris (oxalato) chromate (III) and tris (oxalato) ferrate (III) anions {[M(C2O4)3]3-, M = Cr, Fe} and the cationic complex of the 2-picolylamine (amp) and transition metal (Co2 +, Cu2 + and Mn2 +). Co2 + ion builds two-dimensional corrugated layers made of bimetallic chiral chains where the two different complex ions ([Cr(C2O4)3]3- and [Co(amp)3]3 +) are connected by hydrogen bonds. These layers, connected by weak hydrogen interactions, host between them, water molecules which build dodecameric clusters having new characteristics. The dehydrated compound has different structure and color and is able to quickly reabsorb water molecules from surrounding to regenerate the initial compound despite that it has no pores. Several cycles of this process do not seriously affect the crystalline quality of this compound. The compound obtained with the Cu2 + ion also has a two-dimensional framework. Their layers are formed between the dimeric cation [Cu2 (amp) 4Cl]3 + and the anion {[M(C2O4)3]3-,M = Cr, Fe}. Both compounds are iso-structural; their frameworks are formed via π - - - π interactions and build 1D channels which contain water molecules forming hexameric clusters. The compound undergoes a phase transition between 100 K and the dehydration temperature (341K). During this dehydration, a loss of symmetry of the compound is recorded and rehydration process is more difficult than for cobalt(III)-framework. The use of Mn2+ ions does not give the expected architecture but a new coordination polymer

Ce travail présente la synthèse, la caractérisation et l’utilisation (transfert électronique photo-induit) de foldamères de taille nanométriques constitués d’unité quinolines. Grâce a une stratégie de synthèse de doublement de segment une grande variété d’oligomères (jusqu’à 96 unités) ont pu être préparé à partir du synthon 8 aminoquinoline-2-carboxylate.Leurs propriétés dynamiques de ces objets ont été étudiées en solution et en phase gazeuse. La spectrométrie de masse de mobilité ionique a permis de déterminer leur conformation en phase gazeuse. Les expériences de RMN DOSY et d’anisotropie de Fluorescence ont permis de déterminer leurs propriétés de diffusion (transrationnelle et rotationnelle). Ces résultats ont révélés qui ces foldamères sont rigides et que leur architecture hélicoïdale est conservée.Le transport électronique photo-induit à travers ces foldamères de taille nanométrique ont été étudié et le mécanisme de transfert ainsi que son efficacité ont été déterminé pour une série de composés de tailles variables. / Herein, synthesis, characterization and application (photoinduced electron transport) of nanosized quinoline-based foldamers have been explored. With double segment strategy, a variety of helical nanosized foldamers (up to 96 quinoline units) were successfully prepared based on 8-aminoquinoline-2-carboxylic acid monomer.The dynamic properties in gas phase and solution were investigated. Ion mobility mass spectrometry afforded access to the conformation state of foldamers ingas phase; DOSY and fluorescence anisotropy assessed the diffusion (translational and rotational, respectively) of foldamers in solution. All of these techniques revealed that quinoline-based foldamers are rigid and that helical conformation is conserved. Photoinduced electron transport through nanosized foldamer was also studied and the mechanism and the transport ratios were revealed.

Au niveau moléculaire, les fonctions des motifs hélicoïdaux sont souvent associées à la stabilité de cesarchitectures. Par exemple, lorsqu’une hélice α est isolée de la structure tertiaire des protéines, celle-cidevient alors flexible et perd son activité. Afin de contrôler la rigidité de ces architectures, différentesapproches ont été proposées dont la construction d’édifices moléculaires repliés de façon contrôlée : lesfoldamères. Notre équipe s’intéresse aux foldamères d’oligoamide aromatique hélicoïdaux et à l’heureactuelle plusieurs études ont déjà été menées afin de comprendre les facteurs influant la stabilité de telleshélices: la longueur de l’oligomère, le solvant et l’effet de l’introduction d’un espaceur aliphatique dans laséquence. Lors de ce travail nous nous sommes tout d’abord intéressés à la capacité de repliement de cinqmonomères aromatiques couramment utilisés pour la préparation de foldamères. Leur contribution dans lastabilité hélicoïdale du système a été évaluée par RMN, diffraction des rayons-X et HPLC chirale dynamique.Inspirés par le rôle des ponts disulfure dans les protéines, nous avons décidé d’explorer l’effet d’une telleliaison sur la stabilité des hélices d’oligoamide aromatique. Deux composés contenant une liaison disulfureintramoléculaire ou deux liaisons intermoléculaires ont été synthétisés et leur stabilité étudiée par RMN, HPLCChiral et Dichroïsme circulaire.Enfin, la synthèse d’hélices moléculaires de grandes dimensions (assimilables à celles de polymèresmonodisperses) a été réalisée par une approche convergente de triplement de longueur de segment via laformation de liaisons anhydrides entre blocs oligomériques. / At the molecular level, the functions of helical patterns are often directly associated with the stability of thesearchitectures, (in α-helices). For example, upon removal of such an entity from the protein’s tertiary structure,the peptidic helix becomes flexible and thus inactive. In order to control the rigidity of these architectures,several strategies have been used and the construction of completely artificial well folded molecules known asfoldamers is one them. Our group mainly focuses on helical aromatic oligoamide foldamers and to dateseveral studies have been carried out to investigate factors affecting the helical stability; the influence ofoligomer length, solvent effects and the effect of aliphatic linkers within a helical aromatic sequence.In the present study we investigate the helical propensity of five commonly used aromatic monomers infoldamer synthesis and by using NMR spectroscopy, X-ray crystallography and dynamic chiral HPLC weevaluate their contribution in helical stability. Additionally, inspired by the role of disulfide bonds in proteins wedecided to explore their effect on helical stability. For this reason intra- and inter-molecularly disulfide bondedcompounds were designed and synthesized. Their stability was studied using NMR spectroscopy, chiral HPLCand CD experiments.Finally, the synthesis of mono-disperse helical strings of polymeric dimensions through a convergent, segmenttripling strategy has been developed. This protection/deprotection free synthesis was carried out byconnecting oligomeric blocks via a labile anhydride functionality.

The development of synthetic molecular receptors that can selectively bind anions, translocate them through a lipidic bilayer membrane and release them on the other side is a very topical and emerging field of supramolecular chemistry, warranted by the biological importance of transmembrane anion transport.The first part of this thesis is devoted to the study of the transmembrane transport of chloride and of the organic ion pair propylammonium chloride with calix[6]arene receptors functionalized with three (thio)urea arms on their small rim. The transport of chloride across the lipid bilayer of liposomes was monitored by fluorescence spectroscopy using the lucigenin assay. We report the first example of calix[6]arenes able to act as mobile carrier for the transport of chloride via a Cl-/NO3- antiport. We furthermore show that our calixarene systems are able to perform the cotransport of propylammonium chloride, with the chloride bound at the level of the (thio)urea groups and the ammonium included in the calixarene cavity. To provide direct proof of cotransport, we developed a 1H NMR methodology involving a thulium- complex shift reagent with which we were able to distinguish the signals of the ammonium transported inside the liposomes from those of the external ammonium. We also highlight the role of the complexing calixarene cavity for the cotransport by comparing the calixarenes to known transporters deprived of a cavity. The transmembrane transport organic ion pairs could find applications in the transport of biologically relevant ammonium compounds such as catecholamines and amino acids. Our results are reported in the publication “Repositioning Chloride Transmembrane Transporters: Transport of Organic Ion Pairs” Grauwels, G. Valkenier, H. Davis, A. P. Jabin, I. Bartik, K. Angew. Chemie - Int. Ed. 2019, 58, 6921–6925.The second part of this thesis is devoted to the study of binding of chloride to receptors embedded in a lipid membrane, the first step of the transmembrane transport process. Both 1H and 31P NMR spectroscopy proved to be inadequate to study the binding using liposomes or micelles as model membranes. With liposomes, the NMR signals are too broad to be exploited and in the case of micelles, the competition between the lipid headgroups and chloride made it impossible to obtain a NMR signature which unambiguously characterizes chloride binding. The 35Cl NMR signal is on the other hand strongly affected by the presence of anion receptors, both in organic solvents and when incorporated lipid bilayers. We developed a methodology to evaluate the binding of chloride, based on the monitoring of the chloride linewidth during titration experiments. A linear relationship between the linewidth and the concentration of receptors is observed and the slopes can be exploited to compare the binding strengths of different structurally related receptors. We show that 35/37Cl NMR is a versatile tool which can help in the understanding and development of new transporters by providing new insights of the physicochemical understanding of the transport process. / Doctorat en Sciences de l'ingénieur et technologie / info:eu-repo/semantics/nonPublished

<p>Noble metal nanostructures display collective oscillation of the surface conduction electrons upon light irradiation as a form of localized surface plasmon resonance (LSPR) properties. Size, shape and the refractive index of surrounding environment are the key features that controls the LSPR properties. Surface passivating ligands have the ability to modify the charge density of nanostructures to allow resonant wavelength to match that of the incident light, a phenomenon called “plasmoelectric effect,”. According to the drude model Red and blue shifts of LSPR peak of nanostructures are observed in the event of reducing and increasing charge density, respectively. However, herein we report unusual LSPR properties of gold triangular nanoprisms (Au TNPs) upon functionalization with para-substituted thiophenols (X-Ph-SH, X = -NH₂, -OCH₃, -CH₃, -H, -Cl, -CF₃, and -NO₂). Accordingly, we hypothesized that an appropriate energy level alignment between the Au Fermi energy and the HOMO or LUMO of ligands allows delocalization of surface plasmon excitation at the hybrid inorganic-organic interface, and thus provides a thermodynamically driven plasmoelectric effect. We further validated our hypothesis by calculating the HOMO and LUMO levels and also work function changes of Au TNPs upon functionalization with para substituted thiol. We further utilized our unique finding to design ultrasensitive plasmonic substrate for biosensing of cancer microRNA in bladder cancer and owe to unpresidential sensitivity of the developed Au TNPs based LSPR sensor, for the first time we have been utilized to analysis the tumor suppressor microRNA for more accurate diagnosis of BC. Additionally, we have been advancing our sensing platform to mitigate the false positive and negative responses of the sensing platform using surface enhanced fluorescence technique. This noninvasive, highly sensitive, highly specific, also does not have false positives technique provide strong key to detect cancer at very early stage, hence increase the cancer survival rate. Moreover, the electromagnetic field enhancement of Surface-Enhanced Raman Scattering (SERS) and other related surface-enhanced spectroscopic processes resulted from the LSPR property. This dissertation describes the design and development of entirely new SERS nanosensors using flexible SERS substrate based on unique LSPR property of Au TNPs and developed sensors shows excellent SERS activity (enhancement factor = ~6.0 x 106) and limit of detection (as low as 56 parts-per-quadrillions) with high selectivity by chemometric analyses among three commonly used explosives (TNT, RDX, and PETN). Further we achieved the programable self-assembly of Au TNPs using molecular tailoring to form a 3D supper lattice array based on the substrate effect. Here we achieved the highest reported sensitivity for potent drug analysis, including opioids and synthetic cannabinoids from human plasma obtained from the emergency room. This exquisite sensitivity is mainly due to the two reasons, including molecular resonance of the adsorbate molecules and the plasmonic coupling among the nanoparticles. Altogether we are highly optimistic that our research will not only increase the patient survival rate through early detection of cancer but also help to battle the “war against drugs” that together is expected to enhance the quality of human life. </p> <p> </p>

Cyclodextrins (CD) are cyclic oligosaccharides composed of six to more than sixty glucose units. Large-ring cyclodextrins (LR-CD) are novel CD comprised of more than eight glucose units with cavity structures and sizes different from that of commercially available CD₆ – CD₈. LR-CD may offer unique molecular recognition properties and can be produced biocatalytically from starch using cyclodextrin glucanotransferase (CGTase, E.C. 2.4.1.19) in a short reaction time. LR-CD were isolated from glucose, CD₆ – CD₈ and other compounds by complexation of CD₆ – CD₈ as well as precipitation techniques. The yield of LR-CD (degree of polymerization from 9 to 21) was optimized using central composite design. Addition of polar organic solvents to the synthesis resulted in higher yields of LR-CD. LR-CD composed of 9 to 21 glucose units were successfully separated using reversed-phase of ODS-AQ chromatography and normal-phase of polyamine II chromatography. Maintaining optimized reaction conditions aided in a high yield of CD₉; it could be separated with reasonable yield using a single step of polyamine II chromatography. A co-grinding method helped to obtain higher solubilization levels of glibenclamide, vitamin A acetate and vitamin D₃ in CD₁₃, CD₁₀ and CD₁₁, respectively when compared to other CD. Vitamin K₁ was solubilized in distilled water with CD₆ – CD₁₃ using a co-precipitation method. When compared with other CD, CD₉ was seen to be the best solubilizer. The analysis of complexes using ESI MS showed spironolactone and glibenclamide complexed with CD₉ and CD₁₃, respectively.

The present work describes new aspects of organic and supramolecular chemistry. The scientific contribution consists of two parts, which focus on the development of receptors for the sulfate anion and quantitative assessment of stacking interactions between an anthracene dye and nucleobases in an aqueous solution. In Chapter 1, basic concepts concerning supramolecular chemistry and recognition of cations and anions are discussed, as well as modern methods for the determination of binding constants. Particular attention is paid to fluorescence sensing of ions and underlying mechanisms of binding-induced fluorescence responses. Chapter 2 is dedicated to the design and synthesis of new fluorescent sulfate receptors functioning in aqueous solution. After a short review of the most effective sulfate receptors/probes created so far, a new design of PET probes for sulfate sensing is presented. The syntheses and anion binding properties of new compounds are described. The experimental data obtained for the receptors are discussed in detail to reveal the origin of high selectivity towards sulfate. Chapter 3 explores the importance of nucleobase–arene stacking interactions in recognition of nucleotides by synthetic receptors. Various experimental and theoretical approaches are presented to assess dispersion interactions between aromatic rings and nucleobases in the receptor–nucleotide complexes.