Coherent and consistent tracking of provenance data and in particular update history information is a crucial building block for any serious information system architecture. Version Control Systems can be a part of such an architecture enabling users to query and manipulate versioning information as well as content revisions. In this paper, we introduce an RDF versioning approach as a foundation for a full featured RDF Version Control System. We argue that such a system needs support for all concepts of the RDF specification including support for RDF datasets and blank nodes. Furthermore, we placed special emphasis on the protection against unperceived history manipulation by hashing the resulting patches. In addition to the conceptual analysis and an RDF vocabulary for representing versioning information, we present a mature implementation which captures versioning information for changes to arbitrary RDF datasets.

The first purpose was to develop and validate a quantitative selection tool, the weighted application blank, tailored to the nursing home industry. The second purpose of this study was to determine whether data scaling and increased statistical rigor can reduce the frequency of type I and type II errors in the weighted application.

In product development there is still potential to decrease lead times with faster and more accurate simulations. The objective of this thesis was to study whether Finite Element (FE) simulations using explicit LS-DYNA to extract reaction forces from sheet metal forming tools during forming, could be used to improve existing FE models in sheet metal forming software AutoForm.To begin with, the solid CAD-model of the stamping dies were meshed with tetrahedral elements in CATIA and imported into LS-DYNA. In combination with sheet mesh and milling surface meshes from AutoForm, an explicit model was realized. Contacts between sheet mesh and milling surface meshes used the so-called sheet forming contact. The resulting reaction forces were extracted and used in a simulation using the AutoForm software. Resulting simulation was compared to a scan of the physical sheet metal after forming.The direct transfer of reaction forces from LS-DYNA to AutoForm did however not result in the same pressure distribution in AutoForm. The AutoForm simulations using results from LS-DYNA were slightly worse than standard AutoForm simulations.Further work is needed to try and perhaps implement an implicit solution after an initial explicit solution. / Inom produktutveckling finns möjligheter att förkorta ledtider genom snabbare och mera korrekta simuleringar. Syftet med detta arbetet var att undersöka huruvida resultat från explicit LS-DYNA kunde användas för att förbättra nuvarande plåtformningssimuleringar i AutoForm.Den solida CAD-modellen av verktyget meshades med tetraediska element i CATIA och importerades till LS-PrePost, tillsammans med fräsytsmeshar och plåtmesh från AutoForm. Kontakter etablerades mellan plåt och fräsytsmeshar med så kallad sheet forming contact. Modellen löstes sedan explicit. Resulterande reaktionskrafter på plåthållare exporterades till AutoForm och implementerades där. Resulterande simulering jämfördes mot en inskannad fysisk plåt efter plåtformning.Direkt implementering av reaktionskrafter på plåthållaren i AutoForm gav resultat som avvek mer mot inskannad plåt än nuvarande simuleringsstrategi. Direkt implementering av reaktionskrafter gav heller inte en tryckfördelning som liknade den som rapporterades av LS-DYNA.Mer arbete krävs för att om möjligt implementera en implicit lösning efter en initial explicit lösning.

The competition in the car market in the world is continuously intensifying. To gain an advantage in the market while making a profit, each car manufacturer needs a strong focus on always improving in the technology development. It is not just technology of the cars that need development, but it is equally important to improve the manufacturing processes itself. In the end, this will result in more appealing products for the customer at a competitive cost. The aim and scope of this master thesis is to get a deeper understanding of the forces in the stamping die during sheet metal forming in manufacturing. By using strain gauges and microcontrollers, the forces during the entire forming process could be measured and analyzed. The relationship between the force on the pressure pins in the die and the length of the pressure pins was also investigated by adding shims on the pressure pins. A modular system using Arduino Uno with 3D-printed parts was developed to measure the forces in the blank holder during sheet metal forming. An Arduino software system and TeraTerm was found the most appropriate for collecting and organizing data from the strain gauge sensors and microcontrollers. Tests were then conducted using different settings of the press, and these showed that the forces in the blank holder were uneven. Adding shims to the pins so that they were all of equal length evened out the forces in the blank holder. Another test showed that adding more shims to only one of the pins increased the force in that pin, and that adding 0.5mm of shims to that pin more than doubled the maximum force. The system developed in this thesis can measure the forces in the blank holder during the sheet forming process at a lower speed of production. This system can also detect different force settings in the press. Lastly, it can also detect a difference in force for different pressure pin lengths. / Konkurrensen på bilmarknaden i världen intensifieras kontinuerligt. För att få en fördel påmarknaden samtidigt som de gör vinst måste varje biltillverkare ha ett starkt fokus på att alltid förbättrateknikutvecklingen. Det är inte bara bilens teknik som behöver utvecklas, utan det är lika viktigt attförbättra tillverkningsprocesserna i sig. I slutändan kommer detta att resultera i mer attraktiva produkterför kunden till ett konkurrenskraftigt pris. Syftet och omfattningen av detta examensarbete är att få en djupare förståelse av krafterna ipressverktyget under plåtformningprocessen. Genom att använda töjningsgivare och mikrokontrollerkunde krafterna under hela formningsprocessen mätas och analyseras. Förhållandet mellan kraften påmothållarpinnarna i verktyget och längden på pinnarna undersöktes också genom att lägga till shims påpinnarna. Ett modulsystem som använde Arduino Uno med 3D-printade delar utvecklades för att mätakrafterna i formen under formningsprocessen. Ett Arduino-mjukvarusystem och TeraTerm bedömdesvara det mest lämpliga för att samla in och organisera data från töjningssensorer och mikrokontroller. Tester genomfördes sedan med olika inställningar i pressen, och dessa visade att krafterna ipressverktyget var ojämna. Genom att lägga till shims på pinnarna så att de alla var lika långa utjämnadeskrafterna i pressverktyget. Ett annat test visade att genom att lägga till fler shims på endast en avmothållarpinnarna ökade kraften i pinnen. Genom att tillägg till 0,5 mm shims på den pinnen mer änfördubblade den maximala kraften. Systemet som utvecklats i denna rapport kan mäta krafterna i pressverktygets mothållarpinnarunder formningsprocessen vid en lägre produktionshastighet. Detta system kan också upptäcka olikakraftinställningar i pressen. Slutligen kan den också upptäcka skillnader i kraft vid olika längder påmothållarpinnarna.

In conducting this research, I wanted to explore whether political incentives have a significant effect on wildfire management in the United States. I attempt to answer this question by proving a theoretical justification for why wildfires may become more expensive to fight and severe to manage because of political institutions. I then attempt to provide some hard evidence to support this theory by using regression analysis. My analysis suggests that political factors do matter for wildfire suppression funding, although I was unable to find strong enough evidence to suggest that these political factors are actually driving more severe wildfires. This research contributes to the literature on public choice theory, a branch of political economy that looks at government from the individual decision makers’ level. Additionally, this research contributes to the literature on what affects wildfire suppression effectiveness and funding. This research may contribute to future analyses of the institutions that make U.S. wildland firefighters more or less capable of effectively managing wildfires to protect human lives, property, and forests.

Pourquoi l'électeur, s'il sait que son vote ne sera pas pris en compte, s'attache-t-il quand même à voter blanc et nul ? Plus globalement, comment le vote blanc et nul a-t-il pu persister et même augmenter, en dépit de son absence de prise en compte dans les suffrages exprimés ? C'est à ce double questionnement qu'est consacrée cette thèse.En prenant appui sur l'analyse de 52 entretiens semi-directifs avec des électeurs ayant déjà votés blancs et nuls ainsi que sur des archives de bulletins annulés issus des scrutins présidentielles et législatifs de 2007 et 2012 (près de 16 000) et des réponses à un questionnaire diffusé en ligne (1632), notre démarche est donc d'allier le comment au pourquoi (et au « pour quoi ? ») et d'étudier le vote en acte davantage que le vote comme choix ou orientation. Le tout, en interrogeant le vote blanc et nul, non pas seulement comme un refus conjoncturel de choisir – lié essentiellement à un défaut conjoncturel de l'offre politique –, mais en mettant en évidence une autre lecture du phénomène. Plus précisément, nous abordons le vote blanc et nul comme un ensemble d'usages et significations socialement différenciés.Ainsi, dans une Partie n°1, nous étudions l'apparition de la catégorie « blanc et nul », la variation historique de ses normes (explicites et implicites) et les luttes dont sa définition a été l'objet. Le tout, pour comprendre comment une certaine définition du vote blanc et nul s'est imposée au point de faire sens commun (notamment la binarité manichéenne « blanc » versus « nul »). Dans une Partie n°2, il s'agit alors d'analyser la façon dont ce sens commun peut être l'objet de réceptions (voire de réappropriations) individuelles ou collectives – légitimes et illégitimes – par les agents sociaux. Et ce, au point de faire du vote blanc et nul une pratique aux usages pluriels, car socialement différenciés. Enfin, loin d'être réduits aux rôles de « récepteurs », des électeurs peuvent apparaître aussi comme des contributeurs dans la construction – toujours mouvante – de la définition de ce vote, au point d'en faire, par exemple, un outil d'action collective. / In France, elections since 1990's revealed a phenomenon considered for a long time as marginal by the electoral sociology : « blank and null » votes. The object of this thesis is to deconstruct some prenotions about this gesture and to propose a new approach. So, the author analyse it not only as an answer to a determined political offer but, especially, as a practice with plural uses and investments. Finally, he shows how these votes are the translation of relationships socially differentiated to politics and even to representative democracy.

Exclusion of limitation of right to completion of a blank bill of exchange Abstract Blank bill of exchange is an intentionally incomplete instrument that is meant to be fulfilled in order to become a complete bill of exchange. The owner of the blank bill of exchange exercises his/her right to fulfill a blank bill of exchange by completing the prearranged requirements. The thesis focuses mainly on the time limitation of the right to fulfill a blank bill of exchange. The fulfillment of a blank bill of exchange is performed by the owner of a blank bill of exchange by exercising his right to fulfill a blank bill of exchange. This thesis focuses on the time limitation of the right to fulfill a blank bill of exchange. By exercising this right, the owner of a blank bill of exchange validates the bill of exchange. The absence of time limitation becomes especially significant when the maturity date of the bill of exchange is missing. In these circumstances, the owner of a blank bill of exchange has no time limitation for executing his right. According to the constant case-law of the Supreme Court of the Czech Republic, the right to fulfill a blank bill of exchange shall not be subject to the Statute of Limitations or any other time limitation. The presented thesis addresses the question as to whether the right to...

No description available.

I malé změny v Gramatický a lexikální aspekt jsou dva příklady kategorií, které se na této mentální reprezentaci podílí. Pomocí těchto kategorií vytváříme mentální koncepty, pomocí opujeme naše prožívání místa a času. Tato studie zkoumá interakci lexikálního a gramatického vidu a jak se tato interakce odráží na charakteru očních pohybů u mluvčích nizozemštiny. Bylo užito 04). Byly měřeny oční pohyby 20 rodilých mluvčí nizozemštiny, během toho, co sledovali bílou obrazovku bez jakýchkoliv explicitních obrazových stimulů a poslouchali věty vytvořené s ohledem na různé kombinace lexikálního a gramatického vidu. Užité paradigma simuluje případy z běžného života, kdy lidé pasivně poslouchají mluvenou řeč bez doprovodné vizuální složky. Tato studie nabízí důkazy, že gramatický a lexikální aspekt ovlivňují celou řadu očních pohybů. Tato práce je hodnotným rozšířením naší znalosti o psycholingvistické realitě vidu v nizozemštině, tomto ohledu věnována dostatečná pozornost. Výsledky tohoto výzkumu vnáší nové světlo do probíhající diskuse o tom, zda i tak abstraktní ává měřitelné stopy v našem senzomotorickém systému, a zda je schopný ho ovlivňovat. Navíc tato studie otevírá dveře dalšímu výzkumu zaměřenému na spojení mezi jazykem a mozkovými drahami, které se podílí na zpracování vjemových stimulů. klíčová slova:...

Special Purpose Acquisition Companies (SPACs) are public shell entities uniquely constructed to acquire one or more privately held businesses. The transaction's structural characteristics put significant pressure on the management team's capabilities to find a suitable company to acquire within the predetermined time frame. This thesis investigates whether management team characteristics, such as operating experience and gender diversity, increases the likelihood of success in identifying the target company and conducting the merger. Although not statistically significant, the results indicate that SPACs led by “C-suite” operators do not have a higher likelihood of successfully consummating a business combination. Furthermore, our data indicates gender diversity to have a positive impact on acquisition likelihood. / Special Purpose Acquisition Companies (SPACs) är publika skalbolag konstruerade enkom i syfte att förvärva ett eller flera privata bolag. Transaktionen lägger stor vikt på ledningens förmåga att identifiera och förvärva en eller flera verksamheter inom en förbestämd tidsram. Studien undersöker huruvida relevanta karaktärsdrag i ledningsgruppen, såsom operationell erfarenhet och skillnader i kön, ökar sannolikheten att identifiera och förvärva dessa bolag. Resultatet av studien påvisar inget samband mellan operationell erfarenhet och ökad sannolikhet för förvärv, men däremot visar sig skillnader i kön inom ledningsgruppen ha en positiv inverkan på sannolikheten för förvärv. Sammantaget är resultaten dock inte statistiskt signifikanta.