- About
-
The Global ETD Search service is a free service for researchers
to find electronic theses and dissertations. This service is
provided by the
Networked Digital Library of Theses and Dissertations.
Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
Search results
Showing 1 to 5 of 5 (0.04 seconds)| 1 |
Experimental studies of steam and steam-propane injection using a novel smart horizontal producer to enhance oil production in the San Ardo fieldRivero Diaz, Jose Antonio 17 September 2007 (has links)
A 16ÃÂ16ÃÂ5.6 in. scaled, three-dimensional, physical model of a quarter of a 9-spot
pattern was constructed to study the application of two processes designed to improve the
efficiency of steam injection. The first process to be tested is the use of propane as a
steam additive with the purpose of increasing recovery and accelerating oil production.
The second process involves the use of a novel production configuration that makes use
of a vertical injector and a smart horizontal producer in an attempt to mitigate the effects
of steam override.
The experimental model was scaled using the conditions in the San Ardo field in
California and crude oil from the same field was used for the tests. Superheated steam at
190 â 200úC was injected at 48 cm3/min (cold water equivalent) while maintaining the
flowing pressures in the production wells at 50 psig. Liquid samples from each producer
in the model were collected and treated to break emulsion and analyzed to determine
water and oil volumes.
Two different production configurations were tested: (1) a vertical well system with a
vertical injector and three vertical producers and (2) a vertical injector-smart horizontal
well system that consisted of a vertical injector and a smart horizontal producer divided
into three sections. Runs were conducted using pure steam injection and steam-propane
injection in the two well configurations.
Experimental results indicated the following. First, for the vertical configuration, the
addition of propane accelerated oil production by 53% and increased ultimate recovery by an additional 7% of the original oil in place when compared to pure steam injection.
Second, the implementation of the smart horizontal system increased ultimate oil
recovery when compared to the recovery obtained by employing the conventional vertical
well system (49% versus 42% of the OOIP).
|
| 2 |
Mathematical and Statistical Investigation of Steamflooding in Naturally Fractured Carbonate Heavy Oil ReservoirsShafiei, Ali 25 March 2013 (has links)
A significant amount of Viscous Oil (e.g., heavy oil, extra heavy oil, and bitumen) is trapped in Naturally Fractured Carbonate Reservoirs also known as NFCRs. The word VO endowment in NFCRs is estimated at ~ 2 Trillion barrels mostly reported in Canada, the USA, Russia, and the Middle East. To date, contributions to the world daily oil production from this immense energy resource remains negligible mainly due to the lack of appropriate production technologies. Implementation of a VO production technology such as steam injection is expensive (high capital investment), time-consuming, and people-intensive. Hence, before selecting a production technology for detailed economic analysis, use of cursory or broad screening tools or guides is a convenient means of gaining a quick overview of the technical feasibility of the various possible production technologies applied to a particular reservoir. Technical screening tools are only available for the purpose of evaluation of the reservoir performance parameters in oil sands for various thermal VO exploitation technologies such as Steam Assisted Gravity Drainage (SAGD), Cyclic Steam Stimulation (CSS), Horizontal well Cyclic steam Stimulation (HCS), and so on. Nevertheless, such tools are not applicable for VO NFCRs assessment without considerable modifications due to the different nature of these two reservoir types (e.g., presence and effects of fracture network on reservoir behavior, wettability, lithology, fabric, pore structure, and so on) and also different mechanisms of energy and mass transport. Considering the lack of robust and rapid technical reservoir screening tools for the purpose of quick assessment and performance prediction for VO NFCRs under thermal stimulation (e.g., steamflooding), developing such fast and precise tools seems inevitable and desirable.
In this dissertation, an attempt was made to develop new screening tools for the purpose of reservoir performance prediction in VO NFCRs using all the field and laboratory available data on a particular thermal technology (vertical well steamflooding). Considering the complex and heterogeneous nature of the NFCRs, there is great uncertainty associated with the geological nature of the NFCRs such as fracture and porosity distribution in the reservoir which will affect any modeling tasks aiming at modeling of processes involved in thermal VO production from these types of technically difficult and economically unattractive reservoirs. Therefore, several modeling and analyses technqiues were used in order to understand the main parameters controlling the steamflooding process in NFCRs and also cope with the uncertainties associated with the nature of geologic, reservoir and fluid properties data. Thermal geomechanics effects are well-known in VO production from oil sands using thermal technologies such as SAGD and cyclic steam processes. Hence, possible impacts of thermal processes on VO NFCRs performance was studied despite the lack of adequate field data.
This dissertation makes the following contributions to the literature and the oil industry: Two new statistical correlations were developed, introduced, and examined which can be utilized for the purpose of estimation of Cumulative Steam to Oil Ratio (CSOR) and Recovery Factor (RF) as measures of process performance and technical viability during vertical well steamflooding in VO Naturally Fractured Carbonate Reservoirs (NFCRs). The proposed correlations include vital parameters such as in situ fluid and reservoir properties. The data used are taken from experimental studies and also field trials of vertical well steamflooding pilots in viscous oil NFCRs reported in the literature. The error percentage for the proposed correlations is < 10% for the worst case and contains fewer empirical constants compared with existing correlations for oil sands. The interactions between the parameters were also considered. The initial oil saturation and oil viscosity are the most important predictive factors. The proposed correlations successfully predicted steam/oil ratios and recovery factors in two heavy oil NFCRs. These correlations are reported for the first time in the literature for this type of VO reservoirs.
A 3-D mathematical model was developed, presented, and examined in this research work, investigating various parameters and mechanisms affecting VO recovery from NFCRs using vertical well steamflooding. The governing equations are written for the matrix and fractured medium, separately. Uncertainties associated with the shape factor for the communication between the matrix and fracture is eliminated through setting a continuity boundary condition at the interface. Using this boundary condition, the solution method employed differs from the most of the modeling simulations reported in the literature. A Newton-Raphson approach was also used for solving mass and energy balance equations. RF and CSOR were obtained as a function of steam injection rate and temperature and characteristics of the fractured media such as matrix size and permeability. The numerical solution clearly shows that fractures play an important role in better conduction of heat into the matrix part. It was also concluded that the matrix block size and total permeability are the most important parameters affecting the dependent variables involved in steamflooding.
A hybrid Artificial Neural Network model optimized by co-implementation of a Particle Swarm Optimization method (ANN-PSO) was developed, presented, and tested in this research work for the purpose of estimation of the CSOR and RF during vertical well steamflooding in VO NFCRs. The developed PSO-ANN model, conventional ANN models, and statistical correlations were examined using field data. Comparison of the predictions and field data implies superiority of the proposed PSO-ANN model with an absolute average error percentage < 6.5% , a determination coefficient (R2) > 0.98, and Mean Squared Error (MSE) < 0.06, a substantial improvement in comparison with conventional ANN model and empirical correlations for prediction of RF and CSOR. This indicates excellent potential for application of hybrid PSO-ANN models to screen VO NFCRs for steamflooding. This is the first time that the ANN technique has been applied for the purpose of performance prediction of steamflooding in VO NFCRs and also reported in the literature. The predictive PSO-ANN model and statistical correlations have strong potentials to be merged with heavy oil recovery modeling softwares available for thermal methods. This combination is expected to speed up their performance, reduce their uncertainty, and enhance their prediction and modeling capabilities.
An integrated geological-geophysical-geomechanical approach was designed, presented, and applied in the case of a NFCR for the purpose of fracture and in situ stresses characterization in NFCRs. The proposed methodology can be applied for fracture and in situ stresses characterization which is beneficial to various aspects of asset development such as well placement, drilling, production, thermal reservoir modeling incorporating geomechanics effects, technology assessment and so on. A conceptual study was also conducted on geomechanics effects in VO NFCRs during steamflooding which is not yet well understood and still requires further field, laboratory, and theoretical studies. This can be considered as a small step forward in this area identifying positive potential of such knowledge to the design of large scale thermal operations in VO NFCRs.
|
| 3 |
Mathematical and Statistical Investigation of Steamflooding in Naturally Fractured Carbonate Heavy Oil ReservoirsShafiei, Ali 25 March 2013 (has links)
A significant amount of Viscous Oil (e.g., heavy oil, extra heavy oil, and bitumen) is trapped in Naturally Fractured Carbonate Reservoirs also known as NFCRs. The word VO endowment in NFCRs is estimated at ~ 2 Trillion barrels mostly reported in Canada, the USA, Russia, and the Middle East. To date, contributions to the world daily oil production from this immense energy resource remains negligible mainly due to the lack of appropriate production technologies. Implementation of a VO production technology such as steam injection is expensive (high capital investment), time-consuming, and people-intensive. Hence, before selecting a production technology for detailed economic analysis, use of cursory or broad screening tools or guides is a convenient means of gaining a quick overview of the technical feasibility of the various possible production technologies applied to a particular reservoir. Technical screening tools are only available for the purpose of evaluation of the reservoir performance parameters in oil sands for various thermal VO exploitation technologies such as Steam Assisted Gravity Drainage (SAGD), Cyclic Steam Stimulation (CSS), Horizontal well Cyclic steam Stimulation (HCS), and so on. Nevertheless, such tools are not applicable for VO NFCRs assessment without considerable modifications due to the different nature of these two reservoir types (e.g., presence and effects of fracture network on reservoir behavior, wettability, lithology, fabric, pore structure, and so on) and also different mechanisms of energy and mass transport. Considering the lack of robust and rapid technical reservoir screening tools for the purpose of quick assessment and performance prediction for VO NFCRs under thermal stimulation (e.g., steamflooding), developing such fast and precise tools seems inevitable and desirable.
In this dissertation, an attempt was made to develop new screening tools for the purpose of reservoir performance prediction in VO NFCRs using all the field and laboratory available data on a particular thermal technology (vertical well steamflooding). Considering the complex and heterogeneous nature of the NFCRs, there is great uncertainty associated with the geological nature of the NFCRs such as fracture and porosity distribution in the reservoir which will affect any modeling tasks aiming at modeling of processes involved in thermal VO production from these types of technically difficult and economically unattractive reservoirs. Therefore, several modeling and analyses technqiues were used in order to understand the main parameters controlling the steamflooding process in NFCRs and also cope with the uncertainties associated with the nature of geologic, reservoir and fluid properties data. Thermal geomechanics effects are well-known in VO production from oil sands using thermal technologies such as SAGD and cyclic steam processes. Hence, possible impacts of thermal processes on VO NFCRs performance was studied despite the lack of adequate field data.
This dissertation makes the following contributions to the literature and the oil industry: Two new statistical correlations were developed, introduced, and examined which can be utilized for the purpose of estimation of Cumulative Steam to Oil Ratio (CSOR) and Recovery Factor (RF) as measures of process performance and technical viability during vertical well steamflooding in VO Naturally Fractured Carbonate Reservoirs (NFCRs). The proposed correlations include vital parameters such as in situ fluid and reservoir properties. The data used are taken from experimental studies and also field trials of vertical well steamflooding pilots in viscous oil NFCRs reported in the literature. The error percentage for the proposed correlations is < 10% for the worst case and contains fewer empirical constants compared with existing correlations for oil sands. The interactions between the parameters were also considered. The initial oil saturation and oil viscosity are the most important predictive factors. The proposed correlations successfully predicted steam/oil ratios and recovery factors in two heavy oil NFCRs. These correlations are reported for the first time in the literature for this type of VO reservoirs.
A 3-D mathematical model was developed, presented, and examined in this research work, investigating various parameters and mechanisms affecting VO recovery from NFCRs using vertical well steamflooding. The governing equations are written for the matrix and fractured medium, separately. Uncertainties associated with the shape factor for the communication between the matrix and fracture is eliminated through setting a continuity boundary condition at the interface. Using this boundary condition, the solution method employed differs from the most of the modeling simulations reported in the literature. A Newton-Raphson approach was also used for solving mass and energy balance equations. RF and CSOR were obtained as a function of steam injection rate and temperature and characteristics of the fractured media such as matrix size and permeability. The numerical solution clearly shows that fractures play an important role in better conduction of heat into the matrix part. It was also concluded that the matrix block size and total permeability are the most important parameters affecting the dependent variables involved in steamflooding.
A hybrid Artificial Neural Network model optimized by co-implementation of a Particle Swarm Optimization method (ANN-PSO) was developed, presented, and tested in this research work for the purpose of estimation of the CSOR and RF during vertical well steamflooding in VO NFCRs. The developed PSO-ANN model, conventional ANN models, and statistical correlations were examined using field data. Comparison of the predictions and field data implies superiority of the proposed PSO-ANN model with an absolute average error percentage < 6.5% , a determination coefficient (R2) > 0.98, and Mean Squared Error (MSE) < 0.06, a substantial improvement in comparison with conventional ANN model and empirical correlations for prediction of RF and CSOR. This indicates excellent potential for application of hybrid PSO-ANN models to screen VO NFCRs for steamflooding. This is the first time that the ANN technique has been applied for the purpose of performance prediction of steamflooding in VO NFCRs and also reported in the literature. The predictive PSO-ANN model and statistical correlations have strong potentials to be merged with heavy oil recovery modeling softwares available for thermal methods. This combination is expected to speed up their performance, reduce their uncertainty, and enhance their prediction and modeling capabilities.
An integrated geological-geophysical-geomechanical approach was designed, presented, and applied in the case of a NFCR for the purpose of fracture and in situ stresses characterization in NFCRs. The proposed methodology can be applied for fracture and in situ stresses characterization which is beneficial to various aspects of asset development such as well placement, drilling, production, thermal reservoir modeling incorporating geomechanics effects, technology assessment and so on. A conceptual study was also conducted on geomechanics effects in VO NFCRs during steamflooding which is not yet well understood and still requires further field, laboratory, and theoretical studies. This can be considered as a small step forward in this area identifying positive potential of such knowledge to the design of large scale thermal operations in VO NFCRs.
|
| 4 |
Kurz- und langfristige Angebotskurven für Rohöl und die Konsequenzen für den MarktSchlothmann, Daniel 20 April 2016 (has links) (PDF)
In dieser Arbeit wurden Angebotskurven für 22 bedeutende Ölförderländer ermittelt und anschließend zu globalen Angebotskurven aggregiert. Gemäß den ermittelten Angebotskurven sind nahezu alle gegenwärtig in der Förderphase befindlichen Ölprojekte in den Untersuchungsländern auch beim aktuellen Ölpreis von 35 bis 40 US-$ je Barrel unter Berücksichtigung der kurzfristigen Grenzkosten rentabel. Sollte der Ölpreis jedoch in den kommenden Jahren auf diesem Niveau verharren, wird es bis zum Jahr 2024 zu einem Angebotsengpass auf dem globalen Ölmarkt kommen, da zur Deckung der zukünftigen Nachfrage die Erschließung kostenintensiver, unkonventioneller Lagerstätten und von Lagerstätten in tiefen und sehr tiefen Gewässern notwendig ist. Damit es bis zum Jahr 2024 nicht zu einem solchen Angebotsengpass kommt, ist gemäß des ermittelten langfristigen Marktgleichgewichts ein Ölpreis von mindestens 80 (2014er) US-$ je Barrel notwendig.
|
| 5 |
Kurz- und langfristige Angebotskurven für Rohöl und die Konsequenzen für den MarktSchlothmann, Daniel 08 March 2016 (has links)
In dieser Arbeit wurden Angebotskurven für 22 bedeutende Ölförderländer ermittelt und anschließend zu globalen Angebotskurven aggregiert. Gemäß den ermittelten Angebotskurven sind nahezu alle gegenwärtig in der Förderphase befindlichen Ölprojekte in den Untersuchungsländern auch beim aktuellen Ölpreis von 35 bis 40 US-$ je Barrel unter Berücksichtigung der kurzfristigen Grenzkosten rentabel. Sollte der Ölpreis jedoch in den kommenden Jahren auf diesem Niveau verharren, wird es bis zum Jahr 2024 zu einem Angebotsengpass auf dem globalen Ölmarkt kommen, da zur Deckung der zukünftigen Nachfrage die Erschließung kostenintensiver, unkonventioneller Lagerstätten und von Lagerstätten in tiefen und sehr tiefen Gewässern notwendig ist. Damit es bis zum Jahr 2024 nicht zu einem solchen Angebotsengpass kommt, ist gemäß des ermittelten langfristigen Marktgleichgewichts ein Ölpreis von mindestens 80 (2014er) US-$ je Barrel notwendig.:1. Einleitung
2. Rohöl - Eine naturwissenschaftliche Einführung
3. Charakteristika von Rohölprojekten
4. Historie der Ölindustrie
5. Ökonomik von Rohölprojekten
6. Fallstudien zu den bedeutendsten Förderländern
7. Ermittlung regionaler und globaler Angebotskurven
8. Zusammenfassung
|
Page generated in 0.0507 seconds