Polarization entangled photon pairs on demand are considered to be an important building block of quantum communication technology. It has been demonstrated that semiconductor quantum dots (QDs), which exhibit a certain spatial symmetry, can be used as a triggered, on-chip source of polarization entangled photon pairs. Due to limitations of the growth, the as-grown QDs usually do not exhibit the required symmetry, making the availability of post-growth tuning techniques essential. In this work first the QD-morphology of hundreds of QDs is correlated with the optical emission of neutral excitons confined in GaAs/AlGaAs QDs. It is presented how elastic anisotropic stress can be used to partially restore the symmetry of self-assembled GaAs/AlGaAs and InGaAs/GaAs QDs, making them as candidate sources of entangled photon pairs. As a consequence of the tuning of the QD-anisotropy we observe a rotation of the polarization of the emitted light. The joint modification of polarization orientation and QD anisotropy can be described by an anticrossing of the so-called bright excitonic states. Furthermore, it is demonstrated that anisotropic stress can be used to tune the purity of the hole states of the QDs by modifying the degree of heavy and light hole mixing. This ability might be interesting for applications using the hole spin as a so-called quantum bit.

Ce travail de thèse a pour objectif la caractérisation des propriétés physico-chimiques descéramiques de composition (1-x) BaTi0.8Zr0.2O3-x Ba0.7Ca0.3TiO3 préparées par frittage conventionnelet frittage flash (SPS). Les études structurales réalisées au voisinage du point triple (x≈ 0.32) à l’aidede la diffraction des RX de haute résolution (synchrotron) sur poudre ont introduit des modificationsmajeures sur le diagramme de phase température-composition déjà proposé. La réponseélectromécanique géante mesurée est alors corrélée à la dégénérescence du profil de l’énergie libreinduite par les instabilités structurales. De plus, la flexibilité de la polarisation sous contraintesthermique et électrique est couplée à un assouplissement de la maille cristalline. Ces deuxcaractéristiques contribuent ensemble à une réponse électromécanique colossale via une forteactivité des murs de domaine. La dégradation des propriétés diélectriques, ferroélectriques etpiézoélectriques pour les céramiques BCTZ (x=0.32 et 0.5) élaborées par frittage flash estessentiellement attribuée aux fluctuations importantes de composition et à la stabilisation de laconfiguration des murs de domaines avec la diminution de la taille des grains. / The aim of this work is to make a full characterization of the structural, microstructural, dielectric,ferroelectric and piezoelectric properties of the perovskite-structured oxides (1-x) BaTi0.8Zr0.2O3-xBa0.7Ca0.3TiO3 prepared by a conventional solid-state reaction method (conventional sintering) andSPS fabrication technique. Using high-resolution synchrotron x-ray powder diffraction, the structuralinvestigations carried out close to the triple point (x≈ 0.32) have introduced significant corrections tothe previously published composition-temperature phase diagram. The colossal electromechanicalresponse was then correlated to a strongly degenerate free energy landscape caused by structuralinstabilities. Furthermore, the coupling between the high polarization flexibility under electric andthermal stresses and the ‘lattice softening’ gives rise to a giant electromechanical response due tohigh domain wall activities. The decrease of the dielectric, ferroelectric and piezoelectric propertiesof BCTZ ceramics (x=0.32 and 0.5) processed by SPS was essentially attributed to the largecompositional fluctuations and stable domain wall configurations as the grain size decreased.

Ferroelectric ceramics are very promising materials for a variety of piezoelectric applications such as high permittivity dielectrics, piezoelectric sensors, piezoelectric/electrostrictive transducers, actuators, electro-optic devices, etc. Among the commercially viable ferroelectric ceramics, the lead-zircon ate-titivate Pb(Zr1-xTix)O3 (PZT) based ceramics have dominated the market due to their superior piezoelectric and dielectric property along with other advantages like high electromechanical coupling, ease of processing and low cost. However, the toxicity of lead based materials, and its volatility at processing temperatures is a serious health and environmental concern. Several legislations against lead-based products have been passed all over the world in order to encourage identification of alternative lead-free materials for these applications. As a consequence, there has been a remarkable surge in efforts by researchers on identifying lead-free alternatives for piezoelectric applications. A larger emphasis has been placed on perovskite based ceramics since in addition to possessing excellent properties, their relatively simple structure facilitates understanding structure-property relationships which are important for developing novel high performance materials. Na1/2Bi1/2TiO3 (NBT) and its solid solutions are one of the leading classes of perovskite ceramics, which show promising ferroelectric, piezoelectric and dielectric property thereby having the potential to replace PZT based ferroelectrics. The parent compound NBT is ferroelectric with large ferroelectric polarization (~40 C/cm2), promising piezoelectric properties with 0.08% maximum strain and longitudinal piezoelectric coefficient (d33) ~ 80 pC/N. Though NBT was discovered nearly six decades ago, a clear understanding of its structure remained elusive for a long time since different characterization techniques yielded contradicting reports on its structure and nature of phase transformation. However, rapid advances in characterization techniques in recent years have led to uncovering of new results, thereby shedding light on the true structure of NBT. X-ray and neutron diffraction studies in the past have shown that NBT exhibits rhombohedral (R3c) structure at room temperature, which undergoes a gradual transformation into tetragonal (P4bm) structure at ~230oC. However, recent characterization of both single crystal and powder of NBT using high resolution x-ray diffraction showed that the room temperature structure is not purely rhombohedral and the structure can be better modeled with a monoclinic (Cc) structure. In contrast to x-ray and neutron diffraction, electron diffraction studies have shown evidence for the presence of planar disorders, corresponding to in-phase octahedral tilts in the sample which cannot be accounted for by either R3c or Cc structure. In addition, EXAFS, x-ray and neutron total scattering studies, diffuse scattering studies, etc. have shown that the structural parameters obtained from bulk diffraction techniques are significantly different from the local structure of the material. Similar ambiguities have been observed even in NBT based solid solutions like BaTiO3, K1/2Bi1/2TiO3, etc. which show enhanced properties at the morphotropic phase boundary (MPB). A major breakthrough in understanding the structural complexity involved in NBT based solid solutions was achieved when it was found that the structure of the MPB compositions were sensitive to electric field. This led to solving the mystery behind the appearance of cubic-like phase at some of the MPB compositions where the application of electric-field resulted in the transformation of the structure into a co-existence of rhombohedral and tetragonal phases. Observation of an electric-field-induced structural transition at the MPB compositions was expected, because the MPB signifies instability in the system and even a minor external force can significantly influence the system. However, we have found that the structure of even pure NBT is significantly influenced by electric field and the framework of this thesis is based on this particularly important result. The intrinsic tendency of the electric field to affect the structure of NBT is a major factor which needs to be considered when studying similar phase transitions in the MPB compositions of NBT-substituted systems also. This was not taken into account by other research groups, and they assumed that the instability associated with the MPB was the only major factor involved in the electric-field induced transitions. A simple but highly effective strategy of grinding the electrically poled pellet into fine powder and then collecting x-ray diffraction patterns, facilitated elimination of preferred orientation in the sample. Thus, structural analysis by Rietveld refinement was possible even on the poled sample, which has not been carried out by any other groups on any ferroelectric ceramics so far. The initial part of the thesis deals with addressing the structural complexity of pure NBT, wherein the effect of electric field on the bulk structure as well as the local structure was studied in great detail. Later on, similar concepts are used to investigate BaTiO3 and K1/2Bi1/2TiO3 substituted NBT also. The first chapter of the thesis provides a brief introduction to the field of ferroelectrics, perovskite structure and their phase transition. An exposure to concepts like relaxor ferroelectrics, morphotrophic phase boundary, octahedral tilting, etc. has been provided. Then, a detailed overview of the existing literature related to the structure of NBT and its phase transition studies with temperature has been discussed. The details of the experimental procedures, characterization techniques used, and some theory behind these techniques have been provided in chapter 2. The third chapter deals with the room temperature structural characterization of pure NBT using techniques like x-ray diffraction, neutron diffraction, electron diffraction and EXAFS analysis. The results of these structural characterizations are also complemented with first-principles calculation study of the ground state structure of NBT, dielectric and ferroelectric characterization, and ageing studies. While x-ray and neutron diffraction clearly established electric-field induced structural transition from a monoclinic (Cc) to rhombohedral (R3c) structural transition, first principles calculation showed that the monoclinic phase is not stable and hence cannot be the ground state structure of NBT. Also, the possibility of the monoclinic features appearing in the x-ray diffraction solely due to micro structural effects by nano-sized domains was discussed. Comparison of electron diffraction of poled and unpoled samples of NBT showed that the in-phase tilted regions were greatly suppressed in the poled samples. Even HRTEM images showed that the unpoled samples had a very high concentration of strain heterogeneity in them, which was absent in the poled samples. This gave a direct evidence of correlation between observation of monoclinic phase and the presence of in-phase tilted regions in the unpoled samples. It was proposed that the strain caused by these in-phase tilted disorders caused distortion in the original rhombohedral lattice thereby making the structure appear monoclinic. Application of electric field causes the in-phase octahedral tilt disorders to vanish, thereby even the monoclinic features observed in the XRD also disappear. The fourth chapter discusses the consequences of poling on the high temperature phase transition behavior of NBT. We have used temperature dependent x-ray and neutron diffraction, Raman spectroscopy and EXAFS analysis whose results were correlated with the anomalies observed in temperature dependent dielectric and polarization studies. We found that the poled sample shows a sharp anomaly at the depolarization temperature (Td) in all the characterization techniques used, in contrast to a diffuse or negligible effect seen in the unpoled sample. The depolarization temperature was found to be associated with introduction of structural disorder in the sample in the form of in-phase octahedral tilts. This also gave rise to a normal to relaxor ferroelectric transition at Td, and this relaxor behavior persisted even after cooling the sample to room temperature. An intermediate cubiclike phase was observed from x-ray diffraction at around 300C wherein the rhombohedral phase vanishes and the tetragonal phase begins to appear. Even single crystal study of NBT in the past showed sudden disappearance of the domains at 300C, even though they were visible at both above and below this temperature. This effect was called isotropization, and was postulated to arise due to extremely small domains which made the system isotropic. However, our neutron diffraction pattern showed that in-phase tilted superlattice reflections persisted at this temperature which meant that the structure was not truly cubic at this temperature. Further, a neutron diffraction study at higher temperatures showed that the in-phase tilted superlattice reflections persisted even above the cubic phase transition temperature, in corroboration with similar reports from high temperature electron diffraction. Chapter five deals with the BaTiO3 substituted NBT system, which has gained tremendous interest in the last decade as a viable piezoelectric ceramic for commercial applications. Though a large number of groups have already carried out exhaustive studies on this system, most of the work concentrated mainly on the MPB compositions which showed enhanced piezoelectric properties. In this chapter, we highlight some important findings in the pre-MPB and post-MPB compositions. Using room-temperature and high temperature x-ray diffraction, we show that there exists a subtle compositional phase boundary at x = 0.03, which disappears upon poling the sample. While the monoclinic phase in pure NBT becomes cubiclike at this composition, the depolarization temperature (Td) also slightly increases up to this composition and then decreases upon further Ba substitution. Similar studies were also carried out with compositions containing slightly excess bismuth in them (0.1 mol %), whose purpose was to negate the effects of Bi-vaporization during sintering. It was found that while the compositional phase boundary remained essentially unchanged, there was a decrease in Td for all the compositions. It was also realized that the addition of excess bismuth improved the overall piezoelectric property of the system. Studies on higher compositions of Ba in the post-MPB regions further revealed two additional compositional phase boundaries. A criticality in the coercive field and spontaneous tetragonal strain was observed at x = 0.2, which was found to be associated with crossover from a long-period modulated tetragonal phase (for x < 0.2) to a no modulated tetragonal phase (for x > 0.2). Near the BT rich end (x ~ 0.7), the system exhibits a crossover from normal to a diffuse/relaxor ferroelectric transition with increasing Na1/2Bi1/2 substitution. The onset of relaxor state by Na1/2Bi1/2 substitution on the Ba-site, was shown to increase the spontaneous tetragonal strain in the system. This was because of the enhancement in the covalent character of the A-O bond by virtue of the Bi+3 6s2 lone pair effect, and it also led to a sudden increase in the tetragonal-to-cubic transition temperature. This was in contrast to other chemical modifications of BT reported in the past (like Zr, Sn, Sr, etc.) where the relaxor state is accompanied by a weakening of the ferroelectric distortion and a decrease in the critical temperature. Finally, chapter six covers the effect of electric field induced phase transition in K1/2Bi1/2TiO3 substituted NBT. Visual observation showed that while the compositions (x < 0.2) behaved similar to pure NBT, wherein the structure became purely rhombohedral upon poling, the effect of electric field was negligible in the post-MPB compositions (x > 0.2). In addition, the peaks in the annealed samples were considerably overlapping which made identifying the structural transitions at the MPB compositions difficult using Rietveld analysis. However, comparison of the FWHM of the {200}pc peaks of compositions x < 0.2 showed that the FWHM began to increase suddenly for x > 0.15 indicating emergence of the tetragonal phase. Also, all the compositions showed an increase in the {200}pc peak FWHM by 0.03 after poling. The depolarization temperature showed only slight variation in the pre-MPB compositions, but showed a minimum at the MPB compositions. Temperature dependent dielectric studies further showed that for the post-MPB compositions, the system remains relaxor even after poling.

Dans cette thèse, nous présentons des études théoriques de matériaux pérovskites sous con-trainte mécanique uniaxiale en combinant les calculs de premier principe DFT ainsi quela théorie phénoménologique de type Landau. Les pérovskites ABO3 forment une classetrès importante de matériaux fonctionnels, qui peuvent présenter un large éventail de pro-priétés (e.g., supraconductivité, magnétisme, ferroélectricité, multiferroïcité, transitionsmétal-isolant. . . ) grâce aux petites distorsions d’ une même structure prototype cubique.Bien que ces composés aient été largement étudiés expérimentalement et théoriquement, ilreste encore des questions importantes et non résolues concernant les effets de contraintesuniaxiales. Au cours de ces dernières années, l’ ingénierie de contrainte a été décrite commeune approche originale pour ajuster les propriétés ferroélectriques pérovskites ABO3. Alorsque les effets de tension épitaxié-biaxiale et pression la hydrostatique, sont plutôt bien com-pris dans cette classe de matériaux, très peu est connu en ce qui concerne l’ effet des con-traintes mécaniques uniaxiales. Notre étude est motivée par ce manque de compréhensionactuelle de l’ effet de tension et compression uniaxiale, qui a été jusqu’à présent presquetotalement négligé. Deux composés prototypes sont étudiés dans le détail: PbTiO3 etSrTiO3. Après une introduction générale sur les composés ABO3 et les calculs techniques(ab initio et modèle phénoménologique de Landau), nous avons étudié l’ effet de contraintesmécaniques sur ces matériaux dans notre thèse.PbTiO3 est un composé ferroélectrique prototypique et également l’ un des composantsmère de la solution solide Pb(Zr,Ti)O3 (PZT), qui est le piézoélectrique le plus largementutilisé dans des applications. Pour PbTiO3, nous avons montré que indépendammentde la contrainte mécanique uniaxiale appliquée, le système conserve un état fondamentalpurement ferroélectrique avec la polarisation alignée, soit le long de la direction de lacontrainte (en phase FEz) ou bien le long d’ un des axes pseudo-cubique, qui lui estperpendiculaire (phase de FEx). Cela contraste avec les cas de contraintes mécaniquesisotropes ou bi-axial, pour qui de nouvelles phases combinant des modes ferroélectriqueset antiferrodistortives ont déjà été décrites. Sous contrainte uniaxiale, PbTiO3 passe d’unétat fondamental FEx sous compression à un état fondamental FEz en tension au-delà d’une tension critique !czz! +1%. Sous contrainte uniaxiale, PbTiO3 présente soit un étatfondamental FEx sous compression ("zz < 0) ou un état fondamental de FEz sous tension("zz > 0). Cependant, ici, un brusque saut des paramètres structuraux est prévu sousdes contraintes de compression et de traction à des valeurs critiques "zz! +2 GPa et −8GPa. Ce comportement semble similaire à celui pré-prédit sous pression isotrope négativeet pourrait se révéler utile en pratique pour améliorer la réponse piézoélectrique dans lesnano-composants.Le deuxième composé intéressant est SrTiO3. Il a été largement étudié au cours desdernières décennies, en raison de ses propriétés exceptionnelles à basse température. Dansce travail, nous avons élargi nos précédentes études de PbTiO3, en explorant théorique-ment les effets de pression sur la perovskite SrTiO3, combinant les premiers principes decalculs et un modèle phénoménologique de type Landau. Nous avons discuté de l’évolutiondes fréquences des phonons de SrTiO3 des trois cas de contraintes isotrope, uniaxial ettensions biaxiaux en utilisant les calculs de premier principe. Nous confirmons des travauxexpérimentaux précédents sur SrTiO3 que ça soit en contrainte épitaxiée ou sous pressionhydrostatique. Enfin, nous avons calculé de diagramme de phase de SrTiO3 sous contrainteuniaxiale, obtenue à partir de la théorie de Landau que nous avons comparé aux calculsde premier principe. / In the present thesis we present theoretical studies of perovskite compounds under uniax-ial mechanical constraints combining first-principles DFT calculations approach and phe-nomenological Landau theory. ABO3 perovskites form a very important class of functionalmaterials that can exhibit a broad range of properties (e.g., superconductivity, magnetism,ferroelectricity, multiferroism, metal-insulator transitions. . . ) within small distortions ofthe same simple prototype cubic structure. Though these compounds have been exten-sively studied both experimentally and computationally, there are still unresolved issuesregarding the effect of pressure. In recent years, strain engineering has reported to bean original approach to tune the ferroelectric properties of perovskite ABO3 compounds.While the effect of epitaxial biaxial strain and hydrostatic strain is rather well understoodin this class of materials, very little is yet known regarding the effect of uniaxial mechanicalconstraints. Our study is motivated by the little existing understanding of the effect ofuniaxial strain and stress, that has been up to now almost totally neglected. Two proto-type compounds are studied in detail: PbTiO3 and SrTiO3. After a general introductionon ABO3 compounds and calculations techniques (ab initio and phenomenological Landaumodel), we studied the effect of mechanical constraints in these compounds in our thesis.PbTiO3 is a prototypical ferroelectric compound and also one of the parent components ofthe Pb(Zr,Ti)O3 solid solution (PZT), which is the most widely used piezoelectrics. ForPbTiO3, we have shown that irrespectively of the uniaxial mechanical constraint applied,the system keeps a purely ferroelectric ground-state, with the polarization aligned eitheralong the constraint direction (FEz phase) or along one of the pseudocubic axis perpen-dicular to it (FEx phase). This contrasts with the case of isotropic or biaxial mechanicalconstraints for which novel phases combining ferroelectric and antiferrodistortive motionshave been previously reported. Under uniaxial strain, PbTiO3 switches from a FEx groundstate under compressive strain to FEz ground-state under tensile strain, beyond a critical strain !czz! +1%. Under uniaxial stress, PbTiO3 exhibits either a FEx ground state undercompression ("zz < 0) or a FEz ground state under tension ("zz > 0). Here, however, anabrupt jump of the structural parameters is also predicted under both compressive andtensile stresses at critical values "zz! +2 GPa and −8 GPa. This behavior appears similarto that predicted under negative isotropic pressure and might reveal practically useful toenhance the piezoelectric response in nanodevices.The second compound of interest is SrTiO3. It has been widely studied in the past decadesdue to its unusual properties at low temperature. In this work, we have extended ourprevious investigations on PbTiO3 by exploring theoretically the pressure effects on per-ovskite SrTiO3 combining the first-principles calculations and a phenomenological Landaumodel. We have discussed the evolution of phonon frequencies of SrTiO3 with the threeisotropic, uniaxial and biaxial strains using first-principles calculations. We also reproducethe previous work done in SrTiO3 with epitaxial strain and hydrostatic strain. Finally,we have calculated the phase diagram of SrTiO3 under uniaxial strain, as obtained fromLandau theory and discussed how it compares with the first-principles calculations.

O titanato e zirconato de chumbo \'PB\'(\'ZR\'1-y\'TI\'y)\'O IND.3\' é um material ferroelétrico de estrutura perovskita que tem sido aplicado como transdutores, amplificadores, sensores piezoelétricos, piroelétricos e memórias ferroelétricas. É bem estabelecido que a incorporação de íons de \'LA POT.3+\' ou \'BA POT.2+\' nos sítios ocupados pelo \'PB\' no sistema \'PB\'(\'ZR\'1-y\'TI\'y)\'O\' (PZT), formando os sistemas \'PB\'1-x\'LA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PLZT) e \'PB\'1-x\'BA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PBZT), provoca mudanças significativas nas suas propriedades. No entanto, poucos trabalhos tem sido dedicados a esses sistemas contendo altas concentrações de \'TI\', principalmente no que se refere à estrutura desses materiais. Assim, este trabalho teve por objetivo analisar as propriedades estruturais e suas correlações com as propriedades dielétricas dos sistemas \'PB\'1-x\'LA\'x\'ZR\'0,40\'TI\'0,60\'O IND.3\' (PLZT100x) e \'PB\'1-x\'BA\'x\'ZR\'0,40\'TI\'0,60\'O IND.3\' (PBZT100x) em função da composição e da temperatura. Foram preparadas amostras cerâmicas por meio de sinterização convencional com x variando entre 0,05 e 0,21 para o sistema PLZT e entre 0,10 e 0,50 para o sistema PBZT. Em relação à estrutura a longa distância, medidas de difração de raios X mostraram uma diminuição no grau de tetragonalidade com o aumento da concentração dos cátions substituintes, que foi atribuída à formação de vacâncias no sítio A (caso do \'LA\') e diferença entre o raio iônico (caso do \'BA\'). Estas alterações estruturais em função da composição foram também responsáveis pelo aumento do grau de difusidade das curvas de permissividade dielétrica e pela observação de um estado ferroelétrico relaxor nas amostras contendo altas concentrações de \'LA\' e \'BA\'. Em relação à estrutural local, os resultados obtidos através da técnica de espectroscopia de absorção de raios X (XAS) nas bordas \'K\' do \'TI\' e LIII do \'PB\' mostraram que a incorporação de átomos de \'LA\' ou \'BA\' à estrutura do PZT leva a uma redução no deslocamento do átomo de \'TI\' em relação ao centro do octaedro \'TI\'O IND.6\' e mudanças na ordem local do átomo de \'PB\'. No que tange as composições contendo 21% at. de \'LA\' e 50% at. de \'BA\', diferentemente dos resultados de DRX que mostraram uma simetria cúbica, a técnica de XAS mostrou uma simetria local tetragonal. Em bom acordo com os resultados obtidos pela técnica de espectroscopia Raman, espectros EXAFS medidos em altas temperaturas mostraram também que a estrutura local não é compatível com uma estrutura de simetria cúbica. Espectros XANES medidos na borda \'K\' do oxigênio revelaram uma redução no grau de hibridização entre os estados 2p do \'O\' com 6sp do \'PB\' à medida que a concentração de \'LA\' ou \'BA\' aumenta, que estaria relacionada com o surgimento de comportamento relaxor. Amostras cerâmicas densas nanoestruturadas de composição PZT, PLZT11 e PBZT10 foram preparadas pelo método de spark plasma sintering (SPS) a fim de analisar a influência do tamanho de grão. Foi verificado que as amostras sinterizadas por SPS apresentam tamanho de grão em torno de 60 nm. A caracterização dielétrica destas amostras mostra que a redução do tamanho de grão causa uma redução no valor de máximo da permissividade dielétrica e características difusas da permissividade em função da temperatura devido ao aumento das regiões de contorno de grão. / Lead titanate zirconate (\'PB\'(\'ZR\'1-x\'TI\'x)\'O IND.3\') are ferroelectric materials with perovskite structure which has been used as transducers, capacitors, piezoelectric and pyroelectric sensors and ferroelectric memories. The substitution of \'PB POT.+2\' ions by \'LA POT.+3\' or \'BA POT.+2\' ions in the \'PB\'(\'ZR\'1-x\'TI\'x)\'O IND.3\' (PZT) system, which leads to the formation of the \'PB\'1-x\'LA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PLZT) and the \'PB\'1-x\'BA\'x\'ZR\'1-y\'TI\'y\'O IND.3\' (PBZT) systems, induces several changes in the electric and structural properties of these materials. However, PLZT or PBZT systems based on \'TI\'-rich compositions have not been thoroughly investigated and the literature contains few reports concerning their structure. Thus, the main objectives of this doctoral thesis were the synthesis and structural characterization of \'PB\'1-x\'R\'x\'ZR\'0.40\'TI\'0.60\'O IND.3\' ferroelectric ceramic samples, with R = \'BA\' and \'LA\' and x between 0.00 to 0.50 (PLZT100x and PBZT100x). The characterization with X-ray diffraction technique of these samples showed a decrease of the tetragonality degree with increase of the doping cation concentration, which was related to the appearance of defects caused by the incorporation of \'LA\' or \'BA\' cations. These structural modifications were also responsible by the increase of the diffuseness at the dielectric permittivity and a relaxor behavior as a function of the \'LA\' or \'BA\' concentration. Concerning the local structure, XANES spectra in the absorption edge of various elements in PLZT and PBZT samples were performed. In the cases of \'TI\' \'K\'-edge absorption, the doping of \'LA\' and \'BA\' atoms in the PZT structure leads to a reduction of the displacement of \'TI\' atom in the center of the \'TI\'O IND.6\' octahedron. However, even when the crystal structure is cubic, a local octahedron distortion remains. EXAFS measurements in \'PB\' LIII-edge and \'ZR\' \'K\'-edge were performed and also indicate that local structure around lead or zirconium atoms is also affected by the introduction of \'LA\' and \'BA\' atoms in the PZT structure. In addition, XANES spectra measured at \'O\' \'K\'-edge revealed a reduction in the hybridization degree between \'O\' 2p and \'PB\' 6sp states with the addition of \'LA\' or \'BA\' atoms to the structure of PZT. It has been shown that hybridization between these states is essential to ferroelectricity and this reduction would be related to the relaxor behavior. PLZT and PBZT systems were also studied depending on the size of particle size in a nanometer scale. Thus samples PZT, PLZT11 and PBZT10 compositions were prepared using the synthesis method of precursor polymers and the process of sintering by spark plasma. A pronounced decrease in the values of maximum permittivity was observed and the dielectric curve as a function of the temperature exhibits a diffuse behavior. This size-induced diffuse phase transition and the reduction of the permittivity magnitude could be related to the differences between the core grain and the grain boundaries.

The present work aimed to laser sintering and physical characterization of barium titanate ceramics doped with lanthanum, Ba1-xLaxTiO3 (0.1 ≤ x ≤ 0.4) mol%, and co-doped with manganese, in order to study the PTC effect (Positive Temperature Coefficient of Resistance). In electrical and electronic equipments, materials that exhibit PTC effect are generally used in circuit protection, or as temperature sensors (thermistors), whose main advantages of thermistors are no contacts subject to corrosion, high resistance to mechanical shock, the long operating life, low cost and more stable than thermocouples. Additionally, the laser sintering process uses a CO2 laser as the main heating source. This process has been touted as a promising technology for the ceramic processing, which are subjected to extremely high heating and cooling rates (~ 2000 ° C / min). During the processes of synthesis and characterization Differential Thermal Analysis (DTA), Thermogravimetry (TG), Dilatometry, Differential Scanning Calorimetry, X-ray Diffraction, Scanning Electron Microscopy, Impedance Spectroscopy and Conductive Microscopy Atomic Force (CAFM) technique were used. Lanthanum doped barium titanate powders were produced via solid state reaction method and calcined at 1200 ° C for 4 hours. The laser sintering process was efficient to obtain ceramics with relative density of up to 95%. The sintered ceramics presented homogeny microstructure surface under the condition of Pmax = 5.5 W/mm2 for 60 seconds. The 02BT La sample showed the lowest room temperature resistivity (104 .cm). This value is roughly three orders of magnitude lower than that observed for conventionally sintered ceramic in electric furnace and with the same dopant concentration. Finally, it is clear that the sintering conditions strongly modify the PTC behavior of the like-BaTiO3 ceramics, thus allowing the fabrication of ceramic components for the thermistors manufacture with different characteristics. / O presente trabalho teve como objetivos a sinterização a laser e a caracterização físicas de cerâmicas de titanato de bário dopadas com lantânio, Ba1-xLaxTiO3 (0,1 ≤ X ≤ 0,4) mol%, e co-dopadas com manganês, visando estudar o efeito PTC (Coeficiente positivo de resistência com a elevação da temperatura). Em equipamentos eletro-eletrônicos os materiais que exibem o efeito PTC geralmente são utilizados na proteção de circuitos ou como sensores de temperatura (termistores), cujas principais vantagens dos termistores são a inexistência de contatos sujeitos à corrosão, a alta resistência a choques mecânicos, a longa vida de operação, baixo custo, e são mais estáveis que os termopares. Adicionalmente, o processo de sinterização a laser utiliza como principal fonte de calor um laser de CO2. Este processo tem sido apontado como uma técnica promissora no processamento de corpos cerâmicos, os quais são submetidos a taxas de aquecimento e resfriamento extremamente elevadas (~2000 °C/min), podendo provocar assim alterações em suas propriedades físicas. Durante os processos de síntese e caracterização fez-se uso das técnicas de Diferencial de Análise Térmica (DTA), Termogravimétria (TG), Dilatometria, Calorimétria Exploratória Diferencial, Difração de raios X, Microscopia Eletrônica de Varredura e Espectroscopia de Impedância e de Microscopia de Força Atômica em modo condutivo (CAFM). Pós de titanato de bário dopados com lantânio foram sintetizados pelo método da reação de estado sólido e calcinados a 1200 oC por 4 horas. O processo e sinterização a laser se mostrou eficiente para obtenção de cerâmicas com densidade relativa de até 95%. Foi obtida uma homogeneidade na microestrutura em toda a superfície da cerâmica, sob a condição de Pmax = 5,5 W/mm2 por 60s. A amostra 02BT:La apresentou menor valor de resistividade à temperatura ambiente, da ordem de 104 .cm. Este valor é aproximadamente três ordens de grandeza menor que o observado para a cerâmica sinterizada convencionalmente em forno elétrico e na mesma concentração de dopante. Finalmente, é possível afirmar que as condições de sinterização modificam fortemente o comportamento PTC em cerâmicas a base de BaTiO3, possibilitando dessa forma a confecção de cerâmicas para fabricação de componentes termistores com diferentes características.

After the prediction of magnetoelectric effect in Cr2O3, in early 1960's, D. Asrov became the first to experimentally verify this phenomenon. After the pioneering work on magnetoelectric materials in 1960's and 1970's, the discovery of large magnetoelectric effect in orthorhombic rare-earth manganite TbMnO3 has revived great interest in magnetoelectric materials, especially during the last decade. Magnetoelectric multiferroics have great potential in applications such as novel memory storage devices and sensors. As a result of extensive theoretical and experimental investigations conducted on rare-earth magnetoelectric manganites, TbMnO3 has become a prototype magnetoelectric multiferroic material. Orthorhombic rare-earth manganites RMnO3 (R = Gd, Tb and Dy) exhibit improper ferroelectricity where the origin of ferroelectricity is purely magnetic in nature. RMnO3 exhibit diverse and complex magnetic interactions and phases. Doped manganites of the type R1-xAxMnO3 (A = Ca, Sr and Ba) present a rich magnetic and electronic phase diagram. The doping concentration, average ion-size and size mismatch (i.e. disor-der) at A-site, all contribute to determine the ground state. A variety of magnetic phases, competing with each other, are responsible for many functional properties like magnetoelectric effect, colossal magnetoresistance (CMR), magnetostriction and magnetocaloric effect (MCE). In this context, studies of magnetoelectric materials are of great relevance from technical as well as fundamental aspects. Notably, complexity of electronic (and magnetic) phases and experimental difficulties in acquiring reliable measurement-data easily are the most concerning issues in establishing a clear understanding of magnetoelectric materials. In the magnetic phase diagram of RMnO3, GdMnO3 lies on the border between A-type antiferromagnetic and cycloidal antiferromagnetic ground states. Cycloidal spin arrangement is responsible for the induction of ferroelectricity in these materials. There are disparate opinions about the ground state of GdMnO3 (whether the ground state is ferroelectric or not). Understanding of the influence of rare-earth magnetic sublattice on magnetism in GdMnO3 (at low temperature) lacks clarity till date. Neutron scattering studies on GdMnO3 due to high absorption cross-section of Gd ion, yield little success in determining the nature of complex magnetic phases in this material. Interestingly, an earlier report on strontium-substituted gadolinium manganite Gd0.5Sr0.5MnO3 demonstrated the spontaneous electric polarization and related magnetoelectric effect. It was hypothesized that the observed ferroelectricity could be improper and electronic in nature. Strontium doping facilitates quenched disorder that leads to interesting magnetic phases and phase transitions. In order to understand the physical properties of gadolinium manganites and to unravel the relationship between them, it is essential to investigate high quality single crystals of these materials. This thesis deals with growth and investigation of several important physical phenomena of gadolinium manganites such as magnetic, electric, magnetoelectric and magnetocaloric properties. The thesis is organized in seven chapters. A brief summary of each chapter follows: Chapter:1 This chapter provides general introduction to magnetoelectric effect and multiferroicity. The term multiferroicity refers to simultaneous existence of magnetic and electric ordering in a single phase material. Magnetoelectric multiferroics have shown great potential for several applications. They exhibit cross coupling between the electronic and magnetic order parameters, hence basics of various magnetic interactions (and magnetism) are brie y discussed in the rst section of the chapter. It is followed by a brief discussion about the principle of magnetoelectric effect. Magnetoelctric coupling is broadly classified into two types namely, direct coupling and indirect coupling. In the former, the emphasis is given on linear magnetoelectric effect. The concept of multiferroicity is introduced in the next section followed by a brief overview and application potential of multiferroics. Further, classi cation scheme of multiferroic materials is discussed. The concept of improper ferroelectricity and description of subcategories namely, magnetic ferroelectric, geometric ferroelectric and electronic ferroelectric are documented. Magnetic ferroelectric category is considered the most relevant; featuring the type of ferroelectric material as GdMnO3 referred in this thesis. The microscopic theory for mechanism of ferroelectricity in spiral antiferromagnets is presented. While brie ng the thermodynamic background of the magnetocaloric effect, indirect estimation of two important characteristics namely, isothermal magnetic entropy change (∆SM ) and adiabatic change in temperature (∆Tad) under the application of magnetic field are dealt with. In the last part of the chapter, motivation and scope of the thesis is discussed. Chapter:2 This chapter outlines various experimental methodologies adopted in this work. It describes the basic principles of various experimental techniques and related experimental apparatuses used. The chapter starts with the synthesis tech-niques used in the preparation of different compounds studied. The principle of oat-zone method, employed for single-crystal growth, is described. Orientation of single crystals was determined using a home-built back- reflection Laue set up. The basics of Laue reflection and indexing procedure for recorded Laue photographs are described. Various physical properties (electric, magnetic, thermal, magnetoelectric and magnetocaloric properties) were studied using commercial as well as home-built experimental apparatuses. Design and working principle of all the experimental tools are outlined in this chapter. Fabrication details, interfacing of measurement instruments and calibration (standardization) of equipment used in this work are described in appropriate sections. Chapter:3 Chapter-3 describes the investigation of various physical properties of high quality single crystals of magnetoelectric multiferroics, GdMnO3. Synthesis of GdMnO3 is carried out using solid state synthesis route. Single phase nature of the material is confirmed by X-ray powder diffraction technique. Single crystals of GdMnO3 are grown in argon ambience using oat-zone method. As grown crystals are oriented with the help of back-reflection Laue method. GdMnO3 exhibits incommensurate collinear antiferromagnetic phase below 42 K and transforms to canted A-type antiferromagnetic phase below 23 K. Magnetic and specific heat studies have revealed very sharp features near the magnetic transitions which also confirm the high quality of the single crystal. dc magnetization studies illustrate the anisotropic behavior in canted A-type antiferromagnetic phase and clarifies the influence of rare-earth magnetic sub-lattice on overall magnetism (at low temperature). Application of magnetic field (above 10 kOe) along `b' axis helps formation of the cycloidal antiferromagnetic phase. Here, spontaneous electric polarization is induced along `a' axis. The temperature variation plot of dielectric constant, ϵa (under ap- plied magnetic field along `b' axis) shows sharp anomalies in the vicinity of magnetic ordering transitions suggesting magnetodielectric effects. Magnetic field tuning of electric polarization establish the magnetoelectric nature of GdMnO3. Magnetocaloric properties of single crystals of GdMnO3 are investigated using magnetic and magnetothermal measurements. The magnitude of the giant magnetocaloric effect observed is compared with that of other rare-earth manganite multiferroics. Magnetocaloric studies shed light on magnetic ordering of rare-earth ion Gd3+. The phenomenon of inverse magnetocaloric effect observed at low temperature and under low fields is possibly linked to the ordering of Gd3+ spins. Complex interactions between the 3d and 4f magnetic sublattices are believed to influence magnetocaloric properties. Chapter:4 The details of synthesis and single crystal growth of Gd0.5Sr0.5MnO3 using oat-zone method are presented in Chapter 4. Single phase nature of the material is veri ed by carrying out powder x-ray diffraction analysis and confirmation of single crystallinity and orientation through back-reflection Laue method. Electric transport studies reveal semiconductor-like nature of Gd0.5Sr0.5MnO3 until the lowest temperature achieved. This is due to charge localization process which occurs concurrently with decrease in temperature. Gd0.5Sr0.5MnO3 exhibits charge-ordered insulator (COI) phase below 90 K (ac-cording to an earlier report). It is found that under application of magnetic field above a critical value, charge ordering melts and the phase transforms to ferromagnetic metallic (FMM) phase. This transformation is first-order in nature with associated CMR (109%). The first-order phase transition (FOPT) occurs between competing COI and FMM phases and manifests as hysteresis across the FOPT. Strontium doping at A-site induces a large size mismatch at A-site resulting in high quenched disorder in Gd0.5Sr0.5MnO3. The disorder plays a significant role in CMR as well as glass-like dynamics within the low-temperature magnetic phase. ac susceptibility studies and dynamic scaling analysis reveal very slow dynamics inside the low-temperature magnetic phase (below 32 K). According to an earlier report, spontaneous electric polarization and magnetoelectric effect were pronounced near FOPT (at 4.5 K and 100 kOe) between COI and FMM phases. It is prudent to investigate FOPT across COI and FMM phases in Gd0.5Sr0.5MnO3 to understand complex magnetic phases present. Thermodynamic limits of the FOPT (in magnetic field - temperature (H-T) plane), such as supercooling and superheating, are experimentally determined from magnetization and magnetotransport measurements. Interestingly, thermomagnetic anomalies such as open hysteresis loops are observed while traversing the FOPT isothermally or isomagnetically in the H-T plane. These anomalies point towards incomplete phase transformation while crossing the FOPT. Phenomenological model of kinetic arrest is invoked to understand these anomalies. The model put for-ward the idea that while cooling across the FOPT, extraction of specific heat is easier than that of latent heat. In other words, phase transformation across FOPT is thermodynamically allowed but kinetics becomes very slow and phase transformation does not occur at the conventional experimental time scale. Magnetization relaxation measurements (at 89 kOe) with field-cooled magnetization protocol reveal that the relaxation time constant rst decreases with temperature and later, increases non-monotonically below 30 K. This qualita-tive behavior indicates glass-like arrest of the FOPT. Further, thermal cycling studies of zero field-cooled (ZFC) and eld-cooled (FC) magnetization indicate that a low temperature phase prepared with ZFC and FC protocols (at 89 kOe) is not at equilibrium. This confirms the kinetic arrest of FOPT and formation of magnetic phase similar to glass. Chapter:5 Chapter-5 deals with the investigation of the effect of an electric field on charge ordered phase in Gd0.5Sr0.5MnO3 single crystals. As discussed in the previous chapter, application of magnetic field above a critical value collapses the charge ordered phase which transforms to FMM phase. In this view, it is interesting to investigate effect of electric field on the charge ordering. There are various reports on doped manganites such as Pr1-xCaxMnO3 (x = 0:3 to 0:4) that claim melting of charge ordering under application of electric field (or current) above a critical value. In this thesis work, current - voltage (I - V) characteristics of Gd0.5Sr0.5MnO3 are studied at various constant temperatures. Preliminary measurements show that the I-V characteristics are highly non-linear and are accompanied by the onset of negative differential resistance (NDR) above a critical current value. However, we suspect a major contribution of Joule heating in realization of the NDR. Continual I - V loop measurements for five loops revealed thermal drag and that the onset of NDR shifts systematically towards high current values until it disappeared in the current window. Two strategies were employed to investigate the role of Joule heating in realization of NDR: 1) monitoring the sample surface temperature during electric transport measurement and 2) reducing of the Joule heating in a controlled manner by using pulsed current I - V measuremenets. By tuning the duty cycle of the current pulses (or in other words, by controlling the Joule heating in the sample), it was feasible to shift the onset of NDR to any desired value of the current. At low magnitude of the duty cycle in the current range upto 40 mA, the NDR phenomenon did not occur. These experiments concluded that the NDR in Gd0.5Sr0.5MnO3 is a consequence of the Joule heating. Chapter:6 `Chapter-6 deals with the thermal and magnetocaloric properties of Gd0.5Sr0.5MnO3 oriented single crystals. Magnetocaloric properties of Gd0.5Sr0.5MnO3 have been studied using magnetic and magnetothermal measurements. Tempera-ture variation of ∆SM is estimated for magnetic field change of 0 - 70 kOe. The eld 70 kOe is well below the critical magnetic eld required for FOPT between COI and FMM phases. Magnetzation - field (M-H) loop shows minimal hysteresis for measurements up to 70 kOe. The minimal hysteresis behavior al-lows one to make fairly accurate estimation of magnetocaloric properties. ∆Tad was separately estimated from specific heat measurements at different magnetic fields. Specific heat studies show the presence of Schottky-like anomaly at low temperature. Chapter:7 Finally, Chapter-7 summarizes various experimental results, analyses and conclusions. A broad outlook of the work in general with future scope of research in this area are outlined in this chapter.

Les solutions solides (1-x)Na0,5Bi0,5TiO3 (NBT) – xCaTiO3 (CT) ont été étudiées par diffraction des rayons X, spectroscopie Raman, microscopie électronique à balayage, spectroscopie d’impédance et DSC. Ce sont des matériaux présentant la structure cristalline pérovskite. L’étude révèle la complexité mais aussi la richesse des phénomènes physiques dans cette famille de composés : les séquences des transitions de phases, l’influence du dopant Ca2+ sur les propriétés physico-chimiques du matériau, la relation étroite entre propriétés diélectriques et caractéristiques structurales. Des solutions solides (1-x)NBT – xCT, avec 0 ≤ x ≤ 1,00, ont été synthétisées par voie solide classique puis frittées selon une procédure spécifique dans un milieu confiné pour éviter toute perte de sodium et de bismuth. Les caractéristiques cristallines des solides obtenus imposent clairement de distinguer trois domaines suivant les valeurs de x. En effet, pour les valeurs croissantes de x et à la température ambiante, on observe un premier domaine (Région I, pour x ≤ 0,07) dans lequel le solide obtenu est une solution solide de structure cristalline, de groupe d’espace R3c, identique à celle de NBT pur. Pour les valeurs les plus élevées de x (Région II, pour x ≥ 0,15), le solide obtenu est une solution solide de structure cristalline, de groupe d’espace Pnma, identique à celle de CT pur. Enfin, entre ces deux domaines (Région III, 0,09 ≤ x ≤ 0,13), les solides obtenus sont biphasés, R3c + Pnma, en se limitant aux appellations des groupes d’espacé des phases formées. Dans la région I, lors du chauffage, la séquence des transitions de phases R3c → P4bm → Pm3m est mise en évidence; les températures des transitions se déplacent vers les plus basses températures quand la concentration en Ca2+ augmente. Les solides sont ferroélectriques à l’ambiante puis développent un caractère relaxeur, par coexistence de deux phases, avec l’augmentation de la température. Dans la région II, les solides révèlent un comportement relaxeur dès l’ambiante. Une transition de phase diffuse au sein de la phase orthorhombique Pnma est toutefois mise en évidence ; le solide passe d’un état relaxeur à un état paraélectrique tout en conservant, a priori, la même structure cristalline. Le phénomène de relaxation dans ces composés est expliqué par la formation de micros ou nanorégions polaires. La région III, quant à elle, est caractérisée par l’apparition d’une hystérésis thermique mise en évidence pour la première fois ; elle est expliquée par la relation entre la microstructure cristalline et les propriétés diélectriques. Enfin, l’ensemble de nos résultats a été regroupé dans un diagramme de phase original en composition et en température. / The solid solutions (1-x)Na0,5Bi0,5TiO3 (NBT) – xCaTiO3 (CT) were studied by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, impedance spectroscopy and DSC. These materials have a perovskite crystalline structure. This study reveals not only the complexity but also the richness of physical phenomena in these compounds: phases transitions sequences, the Ca2+ effect on the physical-chemistry properties and the relation between dielectric properties and crystalline structure. Thereby, (1-x)NBT – xCT solid solutions (0 ≤ x ≤ 1.00) were synthesized by chemical solid route, then they were sintered by a particular procedure in order to avoid sodium and bismuth volatilization. The solid crystalline characteristics obtained prove clearly the necessity to distinguish three fields as a function of x values. First of all, for increasing x at room temperature, there is a first region so called region I (x ≤ 0.07), wherein the crystalline structure of solid solutions obtained has a space group R3c identical to that of pure NBT. For the highest values of x, (Region II, x ≥ 0.15), the solid obtained has a space group Pnma, identical to that of pure CT. Finally, between these two regions, (0.09 ≤ x ≤ 0.13), the solid solutions obtained are biphasic, R3c + Pnma, limited to appellations of the space groups formed phases. In region I, upon heating, phase transition sequence R3c → R3c + Pnma → Pnma was determined; the corresponding transition temperatures move to low values with increasing Ca2+ concentration. These solids are ferroelectric at room temperature and then develop a relaxor character, by coexistence of two phases, with increasing temperature. In region II, these solids reveal a relaxor behavior at room temperature. However, a diffuse phase transition within the orthorhombic phase Pnma has been identified; the solid changes from relaxor to paraelectric while maintaining the same crystal structure. This phenomenon was explained by the formation of micro or nano-polar regions. Region III, demonstrated for the first time, is characterized by thermal hysteresis, and explained by the relation between crystalline microstructure and dielectric properties. Finally, all our results were assembled in an original phase diagram as a function of concentration of Ca2+ dopant and temperature.

Les matériaux composites prennent une place de plus en plus importante dans la conception et la fabrication des moyens de transport et notamment dans le domaine naval où ils sont particulièrement privilégiés. En effet, ces matériaux sont utilisés pour leur légèreté, insensibilité à la corrosion et leurs caractéristiques mécaniques. Dans le domaine militaire, où l'optimisation des moyens de communication et de protection électromagnétique est primordiale, le développement de matériaux composites dotés de propriétés de reconfigurabilité sous commande(s) externe(s), présente un atout opérationnel majeur pour les parois structurales exploitant ces matériaux. Afin d'explorer cette voie, DCNS et l'Institut d’Électronique et de Télécommunications de Rennes (IETR, UMR-6164) se sont associés. Les travaux de thèse engagés ont pour objectif d'étudier et de développer des matériaux composites présentant des fonctions de reconfigurabilité applicables aux systèmes navals tels que les radômes, les antennes et exploitables pour répondre aux problématiques de furtivité (SER). Une première étude a permis d'explorer les matériaux à base de carbone, présentant une potentielle agilité de leurs caractéristiques diélectriques sous actuateur électrique. Ces matériaux présentent également un fort pouvoir absorbant électromagnétique, tributaire des propriétés diélectriques, elles-mêmes potentiellement reconfigurables. La seconde étude engagée a étudié l'impact des matériaux ferroélectriques, c'est-à-dire des matériaux reconfigurables sous champ électrique, lorsqu'ils sont intégrés comme charge dans une résine d'imprégnation. Ce nouveau matériau composite présente alors une reconfigurabilité de ses caractéristiques diélectriques, rendant commandable en fréquence sa structure hôte. Une troisième étude, exploitant aussi le matériau ferroélectrique a permis l'obtention d'une reconfigurabilité des caractéristiques de réflectivité de panneaux composites grâce au développement de surfaces sélectives en fréquence reconfigurables. De nouvelles propriétés ont ainsi été mises en évidence en hyperfréquences. Enfin, les matériaux d'âmes et spécifiquement les nids d'abeilles diélectriques ont fait l'étude d'une fonctionnalisation pour des applications DC et hyperfréquences. / Composite materials are used for their lightness, high resistance to corrosion and high mechanical properties over large application areas, such as naval, ground and aerial. Collaboration between DCNS group and the Institute of Electronics and Telecommunications of Rennes (IETR, UMR-6164) has been initiated to develop smart composite materials with tunable properties at microwaves. Three different routes have been investigated during the thesis work. The first one is based on carbon composite material, its electromagnetic absorbing ability and its potential dielectric tunability. For this, we develop composite materials loaded with various carbon particles (carbon nanotube, graphene, black carbon). Next, to elaborate smart composite materials, a ferroelectric material has been used as filler. The dielectric characteristics of such materials can be tuned under external biasing for example. Thus we develop an active composite material under various external actuators for naval application, and especially for new reconfigurable frequency selective surface (RFSS). Finally dielectric honeycomb materials have been specifically elaborated and studied to develop smart properties for DC and microwave applications. During this work, three different prototypes improving composite materials in naval area have been performed: reconfigurable radome, RCS reduction, and antenna isolation.

The temperature and/or entropy of electrically polarisable materials can be altered by changing electric field E. Research into this electrocaloric (EC) effect has focussed on increasing the size of the EC effects, with the long-term aim of building a cooler with an EC material at its heart. Materials and experimental methods are briefly reviewed. A ‘resetting’ indirect route to isothermal entropy change ∆S for hysteretic first-order transitions is described. An indirect route to adiabatic temperature change ∆T, without the need for field-resolved heat capacity data, is also described. Three temperature controllers were built: a cryogenic probe for 77-420 K with ∼5 mK resolution, a high-temperature stage with vacuum enclosure for 295-700 K with ∼15 mK resolution, and a low-temperature stage for 120-400 K with electrical access via micropositioners. Automation enables dense datasets to be compiled. Single crystals of inorganic salts (NH4)2SO4 , KNO3 and NaNO2 were obtained. Applying 380 kV cm−1 across (NH4)2SO4 , it was found that |∆S| ∼ 20 J K−1 kg−1 and |∆T | ∼ 4 K, using the indirect method near the Curie temperature TC = 223 K. Without the ‘resetting’ indirect method, |∆S| ∼ 45 J K−1 kg−1 would have been spuriously found. Preliminary indirect measurements on KNO3 and NaNO2 give |∆S| ∼ 75 J K−1 kg−1 for ∆E ∼ 31 kV cm−1 near TC = 400 K and |∆S| ∼ 14 J K−1 kg−1 for ∆E ∼ 15 kV cm−1 near TC = 435 K, respectively. A cation-ordered PbSc0.5Ta0.5O3 ceramic showing a nominally first-order transition at 295 K was obtained. The Clausius-Clapeyron phase diagram is revealed via indirect measurements where |∆S| ∼ 3.25 J K−1 kg−1 and |∆T | ∼ 2 K, and direct measurements where |∆T | ∼ 2 K. Clamped samples show broadening of the field-induced transition. Epitaxial, ∼64 nm-thick SrTiO3 films were grown by pulsed laser deposition on NdGaO3 (001) substrates with a La0.67Sr0.33MnO3 bottom electrode. The indirect method gives |∆S| ∼ 8 J K−1 kg−1 and |∆T | ∼ 3.5 K near 180 K with |∆E| = 780 kV cm−1. Finite element modelling (FEM) was used to optimise the geometry of multilayered capacitors (MLCs) for EC cooling. Intrinsic cooling powers of 25.9 kW kg−1 are predicted for an optimised MLC based on PVDF-TrFE with Ag electrodes.