Graphene is a candidate for next generation spintronics devices exploiting its long spin transport length and high carrier mobility. Besides, when put in interaction with a ferromagnet, it may become an active building block, as suggested by recent surface science studies revealing few tenth of a Bohr magneton magnetic moments held by carbon atoms in graphene on iron, and a Rashba spin-orbit splitting reaching about 10 meV in graphene on a high atomic number element such as gold. The extent to which graphene may influence the properties, e.g. magnetic ones, of the materials contacted to it was barely addressed thus far. High quality hybrid systems composed of graphene in contact with magnetic thin layers or nanoclusters are playgrounds for exploring both aspects, the manipulation of the properties of graphene by interaction with other species, and vice versa. In graphene contacted to ultra-thin ferromagnetic layers for instance, strong graphene/ferromagnet interface effects could be employed in the view of manipulating the magnetization in the ferromagnet. The recently discovered close-to-perfect self-organization of nanoclusters on graphene, provides a way to probe magnetic interaction between clusters, possibly mediated by graphene. Three high quality hybrid systems relying on graphene prepared by chemical vapor deposition on the (111) surface of iridium have been developed under ultra-high vacuum (UHV): cobalt ultra-thin and flat films deposited on top of graphene, and intercalated at moderate temperature between graphene and its substrate, and self-organized cobalt- and iron-rich nanoclusters on the 2.5 nm-periodicity moiré between graphene and Ir(111). Prior to these systems, 10 nm-thick Ir(111) single-crystal thin films on sapphire were developed: they were latter employed as a substrate replacing bulk Ir(111) single-crystals usually employed. This new substrate opens the route to multi-technique characterizations, especially ex situ ones which were little employed thus far for studying graphene/metal systems prepared under UHV. Using a combination of in situ surface science techniques (scanning tunneling microscopy, x-ray magnetic circular dichroism, spin-polarized low-energy electron microscopy, auger electron spectroscopy, reflection high-energy electron diffraction) and ex situ probes (x-ray diffraction, transmission electron microscopy, Raman spectroscopy, MOKE magnetometry) the structural, vibrational, electronic, and magnetic properties of the three new graphene hybrid systems were characterized and confronted to first-principle calculations. Several striking features were unveiled. The interface between graphene and cobalt involves strong C-Co interactions which are responsible for a large interface magnetic anisotropy, capable of driving the magnetization out-of-the plane of the surface of an ultra-thin film in spite of the strong shape anisotropy in such films. The effect is maximized in the system obtained by intercalation between graphene and iridium, which comes naturally air-protected. Nanoclusters, on the contrary, seem to weakly interact with graphene. Small ones, comprising ca. 30 atoms each, remain super paramagnetic at 10 K, have no magnetic anisotropy, and it turns out difficult, even with 5 T fields to saturate their magnetization. Besides, the magnetic domains size seem to exceed the size of a single cluster, possibly pointing to magnetic interactions between clusters.

Le graphène épitaxié sur des substrats métalliques est un modèle prometteur pour le développement de nouveaux systèmes hybrides, dans lesquelles les effets d'interface peuvent être exploités pour concevoir de nouvelles propriétés. L'insertion d'espèces entre le graphène et son substrat, une opération connues sous le nom d'-"intercalation", est une approche très puissante à cet égard. Avec l'aide des outils de la physique des surfaces, nous avons étudié trois systèmes graphène/métal, dont deux sont des systèmes hybrides intercalés, et l'autre est un candidat pour un tel système : (i) le graphène/Ir(111) intercalé avec un oxyde ultra-mince, (ii) graphène/Ir(111) intercalé avec des couches sub-atomiques du cobalt et (iii) de graphène sur Re(0001). Nous avons montré que certains défauts, en particulier les ridules (délamination du graphène de son substrat) et d'autres régions courbées du graphène, jouent un rôle crucial, non anticipé, dans le processus d'intercalation. Nous avons également observé que l'intercalation se déroule d'une manière nettement différente sous ultravide et à pression atmosphérique. Dans le premier système, des espèces contenant de l'oxygène entrent à l'extrémité ouverte des ridules et diffusent au long de ces ridules pour former des nano-rubans d'oxyde. Ces rubans modifient le dopage électronique du graphène, ce qui se traduit également par des changements substantiels dans la réponse optique inélastique (Raman) du graphène. Dans le second système, l'efficacité de l'intercalation est apparue dépendante de l'interaction graphène-métal, laquelle varie entre les domaines de graphène orientés différemment sur_(111). Dans ce système, les sites d'entrée pour les espèces intercalées, des régions courbées dans le graphène, ont pu être identifiés grâce à l'observation in_operando (en cours de croissance) du processus. Enfin, la croissance de graphène dans un troisième système (graphène/Re(0001)), a été étudiée afin de permettre le développement de futurs systèmes graphène/Re hybrides supraconducteurs. Dans ce système, nous avons proposé deux voies de croissance, l'une étant basé sur un processus de croissance en surface d'un monocristal massif de Re(0001), l'autre reposant sur la ségrégation en surface, activée thermiquement, du carbone dissout à haute température dans des films minces de Re sur saphir.

Dans ce travail de thèse, la microspectrométrie Raman a été mise à profit pour décrire les changements structuraux induits par la réaction électrochimique d'insertion/désinsertion des ions lithium dans des composés de structure lamellaire LiCoO2 et cubique LiMn2O4 et LiNi0.4Mn1.6O4, utilisés comme électrodes positives dans les batteries Li-ion. L'étude du composé d'électrode LiCoO2 pendant le processus de charge permet de mettre en évidence une région biphasée où la phase initiale coexiste avec une nouvelle phase hexagonale caractérisée par une expansion du paramètre inter-feuillets de l'ordre de 3% et un affaiblissement de la liaison Co-O dans le plan des feuillets. Dans le cas de LiMn2O4, une nouvelle attribution du spectre Raman a pu être proposée. Pendant la charge à 4V, un mécanisme à trois phases (phase initiale LiMn2O4, phase intermédiaire, phase pauvre en lithium) est décrit par spectroscopie Raman alors que la diffraction des RX ne permet pas d'observer la phase intermédiaire dans nos conditions de mesure. L'étude de l'insertion électrochimique du lithium dans LiMn2O4 (région 3V), a permis de montrer pour la première fois par spectroscopie Raman la formation progressive d'une phase tétragonale de composition Li2Mn2O4 qui coexiste avec la phase cubique initiale et qui est pure en fin de décharge. La réversibilité de cette transition structurale a également été démontrée. Dans le cas du composé substitué au nickel, LiNi0.4Mn1.6O4, une attribution complète du spectre Raman est proposée pour la première fois. L'étude par diffraction des RX du matériau en fonction de l'état de charge et de décharge met en évidence une conservation de la structure cubique avec des variations modérées de paramètres de maille. Le spectre Raman présente quant à lui des variations très significatives qui rendent compte de la présence dans des proportions différentes des espèces redox impliquées dans le fonctionnement électrochimique (Mn4+, Mn3+, Ni2+, Ni3+, Ni4+). Une analyse spectrale par décompositions de bandes permet d'identifier et de quantifier les proportions relatives des différents couples redox du nickel. Une réversibilité complète de la signature Raman est observée en décharge. Une application concrète et originale de la spectroscopie Raman a consisté à étudier le mécanisme d'autodécharge qui est observé pour le matériau LiNi0.4Mn1.6O4 complètement chargé. L'évolution des spectres Raman permet de mettre en évidence une réduction rapide et quantitative des ions Ni4+ pendant les premières heures de séjour dans l'électrolyte, puis un processus plus lent de réduction des ions Ni3+. Enfin, pour la première fois également, l'insertion du lithium dans le composé LiNi0.4Mn1.6O4 a été explorée par microspectrométrie Raman et a permis notamment d'identifier l'empreinte Raman de la phase la plus réduite de symétrie tétragonale Li2Ni0.4Mn1.6O4. L'originalité de ce travail a été d'apporter un grand nombre de données Raman expérimentales sur des matériaux d'électrode performants fonctionnant à 4V. De nouvelles attributions ont pu être proposées pour les composés initiaux, et des données vibrationnelles inédites ont été fournies sur les composés formés en charge et en décharge. Dans certains cas, ces données ont permis, sur la base d'une analyse détaillée des spectres Raman par décompositions de bandes, de proposer un raisonnement quantitatif sur l'existence de phases ou d'espèces redox en mélange. Il conviendrait bien sûr de corroborer ces nouvelles données et attributions par des calculs théoriques ab initio capables de simuler les fréquences et les intensités des modes vibrationnels dans les structures hôtes et lithiées

Submitted by Maike Costa (maiksebas@gmail.com) on 2017-06-21T13:34:41Z No. of bitstreams: 1 arquivototal.pdf: 8365560 bytes, checksum: 9864dee1c44924e2f7a2db5c50f4a7aa (MD5) / Made available in DSpace on 2017-06-21T13:34:41Z (GMT). No. of bitstreams: 1 arquivototal.pdf: 8365560 bytes, checksum: 9864dee1c44924e2f7a2db5c50f4a7aa (MD5) Previous issue date: 2016-08-03 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES / The bentonite term designates gross clays containing at least 50% of smectite and particularly montmorillonite. The smectite have features like lamellar structures, ion exchange capacity, variability of the chemical composition and the electrical charge of the lamellae, which determine the properties in interactions with organic and inorganic substances. Changes in physical and chemical properties of these materials after intercalation of organic compounds has drawn attention due to wide applicability by these hybrids. polar organic molecules such as amines, may replace the water molecules that occupy the interlayer space, resulting in organofílicos materials. Within this perspective, we obtained hybrid bentonite intercalation / amines using bentonite exchanged with sodium and calcium cations. In this case we have used two cyclic diamines of pharmacological importance, an aliphatic, piperazine (PPZ) and an aromatic, pyrazine (PRZ) for hybrid formation by several synthesis routes. Then the drug amiloride hydrochloride, which has in its structure the pyrazine ring is loaded in calcium bentonite sample for subsequent emissions testing. The characterization techniques such as, XRD, IR, TEM, inter alia, the efficiency in all cases. Thus, the results indicate a possible application of such hybrids for obtaining the metal complexes and the use of these systems for controlled emission tests in view of the PPZ have pharmacological properties while PRZ is a base molecule for various drugs, such as amiloride, for example. / O termo bentonita designa as argilas brutas contendo pelo menos 50% de esmectitas e particularmente montmorillonita. As esmectitas possuem características como: estrutura lamelar, capacidade de troca iônica, variabilidade da composição química e da carga elétrica das lamelas, que determinam as propriedades nas interações com substâncias orgânicas e inorgânicas. As alterações nas propriedades físicas e químicas desses materiais após a intercalação de compostos orgânicos tem chamado atenção devido à vasta aplicabilidade apresentada por esses híbridos. Moléculas orgânicas polares, como aminas, podem substituir as moléculas de água, que ocupam o espaço interlamelar, resultando em materiais organofílicos. Dentro dessa perspectiva, foram obtidos híbridos de intercalação bentonitas/aminas utilizando bentonitas trocadas com cátions de sódio e cálcio. Neste caso foram utilizadas duas diaminas cíclicas de importância farmacológica, uma alifática, piperazina (PPZ) e uma aromática, pirazina (PRZ) para a formação de híbridos por diversas rotas de síntese. Em seguida o fármaco cloridrato de amilorida, que tem em sua estrutura o anel pirazínico, foi carregado na amostra cálcica da bentonita para consequentes ensaios de emissão. As técnicas de caracterização como, DRX, IV, MET, entre outros, comprovaram a eficiência em todos os casos. Sendo assim, os resultados indicam uma possível aplicação desses híbridos para obtenção de complexos metálicos, bem como o uso destes sistemas para ensaios de emissão controlada tendo em vista que a PPZ tem propriedades farmacológicas, enquanto a PRZ é uma molécula base para diversos fármacos, como a amilorida, por exemplo.

O presente trabalho trata da preparação e caracterização de três tipos de materiais, todos envolvendo hidróxidos duplos lamelares (HDLs) contendo íons cobalto e alumínio na composição das lamelas. Primeiramente, avaliou-se a influência de parâmetros de síntese na obtenção de HDLs intercalados com os ânions inorgânicos carbonato, cloreto e nitrato. Segundo dados de espectroscopia eletrônica UV-VIS, ressonância paramagnética eletrônica (EPR) e espectroscopia de fotoelétrons excitados por raios X (XPS), ocorre a oxidação parcial do Co2+ em Co3+ na lamela de HDL e, no caso do material contendo íon carbonato, observa-se a presença de radical carbonato, demonstrando a reatividade redox das matrizes com íons cobalto. A segunda parte do trabalho consistiu na intercalação do ânion derivado do ácido 2- aminotereftálico (ATA) em HDL. A presença do cátion cobalto nas lamelas e do grupo amino na espécie orgânica promoveu alterações significativas nas propriedades eletrônicas e térmicas do material (abreviado Co2Al-ATA). Assim como na primeira parte desta tese, as transformações ocorridas com o íon ATA devem incluir a formação inicial de um radical orgânico (de modo similar à polimerização da anilina), para o qual o agente oxidante é o íon Co3+ lamelar. Os dados de espectroscopia vibracional (no infravermelho e Raman) e de XPS mostram a presença de segmentos reduzidos (benzenóide) e oxidados (quinóides) na espécie intercalada. A solubilização do HDL em meio ácido permitiu isolar um material orgânico de cor preta que possui segmentos semiquinóides (radical orgânico) em sua estrutura, além dos reduzidos. A última etapa da presente tese consistiu em pirolisar o material Co2Al-ATA mencionado acima. Verificou-se que a alteração no procedimento de pirólise, como a temperatura, o desenho do forno, a forma do cadinho (cilíndrico ou barca), o tempo de resfriamento do sistema ou a atmosfera dinâmica ou estática, por exemplo, afetam as propriedades do produto final de decomposição. Nos compósitos obtidos, as fases inorgânicas provenientes da decomposição do HDL foram uma mistura de óxidos mistos de cobalto e alumínio (Co(CoxAl1-x)2O4), óxido de cobalto (CoO) e cobalto metálico. A fase de carbono apresentou perfil espectral de carbono grafítico nanocristalino e foi obtida em valores de temperatura de pirólise superiores a 800°C. Os compósitos contendo nanopartículas de cobalto metálico são ferromagnéticos. A reatividade redox dos HDLs de cobalto e as propriedades de seus produtos de decomposição apresentam potencial para aplicação em dispositivos eletroquímicos. / The present work reports the preparation and characterization of three types of materials, all involving layered double hydroxides (LDHs) containing cobalt and aluminum ions in the layer composition. First, the influence of synthetic parameters on the production of LDHs intercalated with the inorganic anions carbonate, chloride and nitrate was evaluated. According to UV-VIS electronic spectroscopy, electron paramagnetic resonance (EPR) and x-ray photoelectron spectroscopic (XPS) data, the partial oxidation of Co2+ to Co3+ occurs in the LDH layer and, in the case of the material containing carbonate ion, the presence of carbonate radical species demonstrates the redox reactivity of the matrices with cobalt ions. The second part of the work comprised the intercalation of the anion derived from 2- aminoterephthalic acid (ATA) in to LDH. The presence of the cobalt cation in the layer and the amino group in the organic species promoted significant changes in the electronic and thermal properties of the material (abbreviated Co2Al-ATA). As in the first part of this thesis, transformations occurring with the ATA ion should include the initial formation of an organic radical (similar to aniline polymerization), for which the oxidizing agent is the Co3+ ion in the layer. The vibrational (infrared and Raman) spectroscopy and XPS data show the presence of reduced (benzenoid) and oxidized (quinoids) segments in the intercalated species. The solubilization of HDL in acid medium allowed the isolation of a black organic material that has semiquinoid (organic radical) segments in its structure besides the reduced one. The last stage of the present thesis consisted of pyrolysis of the Co2Al-ATA material mentioned above. It was observed that the change in pyrolysis procedure, such as temperature, furnace design, crucible shape (bark or cylinder), system cooling time or dynamic or static atmosphere, for example, affects the properties of the final product of decomposition. In the obtained composites, the inorganic phases from the HDL decomposition were a mixture of mixed oxides of cobalt and aluminum (Co(CoxAl1-x)2O4), cobalt oxide (CoO) and metallic cobalt. The carbon phase showed nanocrystalline graphite carbon spectral profile and was obtained at pyrolysis temperature values above 800 °C. The composites containing metallic cobalt nanoparticles are ferromagnetic. The redox reactivity of HDLs containing cobalt and the properties of their decomposition products present potential for application in electrochemical devices

Orientadores: Abner de Siervo, Richard Landers / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin / Made available in DSpace on 2018-08-25T18:41:09Z (GMT). No. of bitstreams: 1 DeLima_LuisHenrique_D.pdf: 24142455 bytes, checksum: b13ea70fe8434614a9b9ec40d25b3770 (MD5) Previous issue date: 2014 / Resumo: Monocamadas sp2 de grafeno e nitreto de boro hexagonal (h-BN) têm atraído muita atenção devido ao descobrimento de importantes propriedades, por exemplo, alta resistência mecânica, boa condutividade térmica e excelente estabilidade química e térmica. Porém, enquanto o grafeno é um semicondutor de gap nulo com alta mobilidade dos portadores de carga; o h-BN é um isolante com um largo band gap. Além disso, quando estas monocamadas sp2 são obtidas na superfície de uma variedade de substratos, elas podem exibir superestruturas corrugadas com parâmetro de rede no plano da ordem de nanômetros. Estas superestruturas são importantes para o autoordenamento de moléculas, átomos ou aglomerados de átomos e também para a intercalação de partículas e átomos em posições específicas na interface entre a monocamada sp2 e o substrato. Nesta tese, realizou-se um estudo, básico e aplicado, de monocamadas sp2 de grafeno e h-BN obtidas sobre a superfície do SiC(0001) e do Rh(111), respectivamente. Do ponto de vista básico, foi aplicada a técnica de Difração de Fotoelétrons (XPD) para um estudo da estrutura atômica do grafeno obtido por aquecimento na superfície do SiC(0001) e para a camada de interface entre o grafeno e o SiC, denominada buffer layer (BL). Os resultados de XPD mostraram particularidades distintas na estrutura atômica dessas monocamadas, o que explicaria a diferen_ca na estrutura eletrônica entre a BL e o grafeno. Do ponto de vista aplicado, foi mostrada a viabilidade do nanotemplate de grafeno/BL/SiC(0001) para a obtenção de aglomerados de Co e subsequente estudo das suas propriedades magnéticas por Dicroísmo Circular Magnético de Raios X (XMCD). Os aglomerados de Co foram obtidos sobre a camada de grafeno e os resultados evidenciam uma possível interação cluster-cluster de longo alcance, com influência nas propriedades magnéticas das partículas. Foi investigada também a intercalação dos átomos de Co entre o grafeno e a BL, formando uma rede quase periódica de clusters 2D. O grafeno forma uma barreira de proteção contra oxidação, preservando o caráter metálico das partículas. A monocamada de h-BN sobre a superfície do Rh(111) foi utilizada para a implantação de átomos de Rb. Para a implantação, foi construída uma evaporadora de íons de Rb que permite acelera-los numa faixa de energia possível para penetrar a monocamada de h-BN. Imagens de STM mostraram que os átomos de Rb termalizam entre a monocamada de h-BN e a superfície do Rh(111) em posições especificas da superestrutura, formando o que se denominou de nanotent. A formação dos nanotents e dos defeitos de vacância gerados pelo choque dos íons é uma forma de funcionalização do h-BN, sendo estas estruturas possíveis pontos de ancoragem de moléculas, átomos ou clusters de átomos / Abstract: Graphene and hexagonal boron nitride (h-BN) sp2 monolayers have attracted much attention due the discoveries of their important properties, such as high mechanical strength, good thermal conductivity and excellent chemical and thermal stability. However, while graphene is a zero band gap semiconductor with high carrier mobility; h-BN is a wide band gap insulator. Furthermore, when these sp2 monolayers are obtained on the surface of a variety of substrates, they can exhibit corrugated superstructures with a few nanometers in-plane lattice constants. Such superstructures are important for the self-assembly of molecules, atoms or clusters of atoms and also for the intercalation of these structures at specific positions between the sp2 monolayer and the substrate. In this thesis, we performed a study, fundamental and applied, of sp2 monolayers of graphene and h-BN obtained on the surface of SiC(0001) and Rh(111), respectively. From a fundamental point of view, the Photoelectron Di_raction (XPD) technique was applied for the study of the atomic structure of graphene obtained by heating the surface of the SiC(0001) and for the interface layer between the SiC and graphene, named buffer layer (BL). The XPD results showed distinct peculiarities in the atomic structure of these monolayers, which would explain the difference in electronic structure between BL and graphene. From the applied point of view, it has shown the feasibility of graphene/BL/SiC(0001) nanotemplate to obtain Co clusters and subsequent study of their magnetic properties by X-ray Magnetic Circular Dichroism (XMCD). The Co clusters were obtained on the graphene layer and the results suggest a possible clustercluster long-range interaction, that has influence on the magnetic properties of the particles. It was also investigated the intercalation of Co atoms between graphene, forming a quasi-periodic lattice of 2D-clusters. Moreover, graphene acts as a barrier to oxidation, preserving the metallic character of the clusters. The h-BN monolayer on the surface of Rh(111) was used for the implantation of Rb atoms. For the implantation, it was constructed an evaporator that allows the acceleration of Rb ions to an energy that enables the penetration through the h-BN monolayer. STM images show that the Rb atoms thermalize between the h-BN monolayer and the surface of the Rh(111) at specific positions of the superstructure, forming what is called a \\nanotent\". The formation of the nanotents and the vacancy defects generated by the collision of the ions is a form to functionalize the h-BN, with these structures being possible points for the anchoring of molecules, atoms or clusters of atoms / Doutorado / Física / Doutor em Ciências

No description available.

Heavy metals are non-degradable and their persistence constitutes ecotoxicological ramifications. Their presence in wastewater is inhibitory to microbial digestion processes and can lead to biomagnification in the environment. Clay minerals have been widely studied as inexpensive sorbent materials of aqueous-phase contaminants. Particularly in the case of kaolinite, a non-swelling clay with a low cation-exchange capacity, chemically enhanced derivatives exposing its OH-rich interlayer space to interactions with its external environment are of exceptional interest. The objective of this study was to prepare a novel functionalised kaolinite with the aim of significantly improving its heavy-metal sorption capacity. Due to the robustness of sulfur-metal linkages, the compound 3,6-dithia-1,8-octanediol (HO(CH2)2S(CH2)2S(CH2)2OH) was grafted onto both urea- and DMSO precursors of two kaolinitic clays: the Source clay KGa-1b and a Portuguese clay sample collected from the Clays of Taveiro formation. All samples were characterised by X-ray diffraction and 13C nuclear magnetic resonance spectroscopy (NMR). Initial materials and final samples were also characterised by thermal gravimetric analysis and infrared spectroscopy. The results describe nanohybrid materials that are resistant to hydrolysis and exhibit different grafting fashions. Application as a heavy metal sorbent was tested in ZnCl2 solutions as well as in zinc-spiked raw wastewater. Zinc concentrations were analysed concomitant with other metal species by inductively coupled plasma – mass spectrometry, demonstrating variable sorption capacities of the different clay samples tested and a consistently greater zinc removal in the wastewater system compared to simple zinc solutions. Measured concentrations of concomitantly analysed metals reveals a potentially alarming release of certain heavy metal species from some clay samples as a result of zinc sorption.

No description available.

Masters Thesis summarizes the theoretical findings about lithium-ion akumulators. It gives a overview of the basic types of galvanic cells, then deals in detail with the lithium-on cell. It's composition, electrochemical principle of working, thermal dependence, construction and area of application. The thesis describes the basic methods of measuring lithium-on cells, such as cyclic charging and discharging, cyclic voltammetry. The practical part compares selected types of materials for negative elektrodes in different temperatures.