There is evidence of a prospective association between wellbeing and health outcomes including disease risk and longevity. The aim of this thesis was firstly to further explore whether wellbeing is a risk factor for specific chronic physical diseases, and secondly, to identify potential mediators and moderators of the association between wellbeing and disease risk or longevity. Chapter 1 provides an overview of research into associations between wellbeing and physical health. In addition, we outline theoretical models of how the experience of high wellbeing might impact physical health. In chapters 2 and 3, we build on research into wellbeing and chronic physical disease risk. In these chapters, we tested whether the association between wellbeing and disease risk was similar across different types of disease, and, whether different theoretical domains of wellbeing varied in their association with disease risk. We found particularly strong associations - that were not explained by demographic or health behaviour differences - between higher wellbeing and lower risk of arthritis, diabetes or chronic lung disease. In chapter 4, we further explore the association between wellbeing and arthritis risk using mediation analysis. Specifically, we tested whether this association was mediated by inflammatory biomarkers. We found that the biomarker C-reactive protein accounted for a small proportion of the association between wellbeing and a reduced risk of arthritis. The focus of the next two chapters was on potential moderators of the association between wellbeing and mortality risk. In chapter 5, we examined whether the association between higher wellbeing and lower mortality risk varied across individualist and collectivist cultures. We found a significant interaction between individualism and wellbeing such that the association between wellbeing and risk of mortality from cardiovascular disease was stronger in more individualistic countries. In chapter 6, we examined how positive affect (a subdomain of wellbeing), interacted with another psychosocial factor, namely subjective stress. Here, we tested Pressman and Cohen's (2005) stress buffering hypothesis that positive affect may be most strongly related with health under stressful conditions. In support of this hypothesis, we found that the association between positive affect and all-cause mortality risk was stronger in people reporting higher stress. In the final chapter, we summarise our findings, discuss the limitations of our approach and make recommendations for future research.

O bi-trem é um veículo cada vez mais comum no trânsito brasileiro. Por ser um veículo de grande porte, é capaz de se envolver em acidentes catastróficos caso o sistema de freio não esteja projetado de maneira adequada. Neste contexto é necessário um estudo que permita prever e otimizar o desempenho do sistema de freios para qualquer condição operacional. Para isso foi desenvolvida uma planilha de cálculos para estudar o desempenho da frenagem de um bi-trem. A planilha calcula a aderência que cada eixo utiliza, a desaceleração máxima desenvolvida pelo veículo, o espaço e o tempo de parada, a força de frenagem (e sua porcentagem) em cada eixo, a temperatura final do tambor, a eficiência do sistema de freios, as forças normais ao pavimento, a distribuição real e ideal das forças de frenagem e verifica se o cavalo mecânico e os semi-reboques se enquadram, respectivamente, nos diagramas 3 e 4 do anexo 10 da ECE-R13. Tais cálculos podem ser feitos com o veículo utilizando ou não ABS e com válvula sensível a carga nos semi-reboques e no \"tandem\" do cavalo mecânico. A planilha de cálculo foi aplicada em um veículo exemplo e os resultados são apresentados nesta dissertação. O sistema de freios desse veículo foi otimizado com a utilização da planilha, mostrando como ela pode ser de grande auxílio ao projetista. / The bi-trem (a vehicle similar to a twin trailler truck) is more and more common in the brazilians highways. Because it\'s a large and heavy vehicle it can cause catastrophics accidents if the brakes are not well developed. In this context it is necessary a study that allows to foresee and to optimize the performance of the brakes system for any operational condition. In this work an electronic spread sheet was developed in order to study the braking performance of a bi-trem. The spread sheet calcs the adhesion in each axle, the maximum deceleration, the braking space and the braking time, the braking force (and its percentage) in each axle, the final temperature of the drum, the brake system\'s efficiency, the normal forces, the actual and ideal brake force distribution, and verifies if the tractor and the semi trailers are fitted in the annex 10 of EGE-R13. The reckoning can be made for a vehicle equipped or not with ABS and with the load sensing valve in the semi trailers and in the tandem axle of the tractor. The spread sheet was applied in a example vehicle and the results are presented in this dissertation. The brakes system of this vehicle was optimized with the use of the spread sheet, showing as it can be of great assists the designer.

As a life-limiting illness mediated by rapid advancements in biomedical technologies, metastatic breast cancer (MBC) now presents in increasingly unexpected ways where women are living longer. These women’s lives may not fit well with established healthcare and societal understandings of an advanced breast cancer, including disease progression and prognosis. This qualitative inquiry aims to think differently about women’s daily lives with an ongoing MBC. While also considering the underexplored context of these women living in smaller communities. I explored communities on Central Vancouver Island, which is on the west coast of British Columbia, Canada. The research question directing my inquiry was: how are women, who are living with MBC as a life-limiting illness over an extended period, produced as both living and dying subjects? Informing this research was a feminist relational materialist approach with a healthcare practitioner orientation, primarily informed by Braidotti. I used multiple data collection methods centred around sequential interviews with 14 women who had been living relatively well with MBC for at least two years. Working with relational materialist and post qualitative principles, analysis disclosed the importance of temporal pulses and bodily transpositions in women’s lives. Temporal pulses speak to how time was laden with tensions such that a distinctive part of living with ongoing MBC was an embodied sense of fluctuating time. There was also the idea as to how, at any given moment, women could bodily know their illness and mortality through varying frequencies of the presence and/or absence of markers of living and dying, often at the same time. Bodily transpositions speak to how life-limiting illness was not so much about women moving from one set of circumstances to another as part of a clean-edged transition. Rather, the women navigated daily life with few set waymarkers. Within this context, ‘hope’ took on new forms and living with their advanced breast cancer became a kind of endurance demarcated by what I refer to as generative living. These findings call into question the ways in which MBC gets talked about in categorical terms as palliative or end of life, and/or as chronic. Findings are an opportunity for healthcare practitioners, policymakers, and interdisciplinary leaders to further understand MBC specific to our contemporary context. Project findings renew discussions of how best to support women’s needs, including the ways MBC is talked about. There is also the opportunity to direct further research into MBC as an example of today’s shifting boundaries of living and dying (which I am framing as living<=>dying). / Graduate

<p>We followed up with about 2,000 smallholder households in Senegal, two years after these households participated in a randomized controlled trial (RCT) aimed at reducing levels of aflatoxins in smallholders’ stored maize. In the initial intervention, treated households were provided with training on proper post-harvest practices, low-cost moisture meters for testing if maize was sufficiently dry to store, plastic tarps for drying maize of the ground, and hermetic (airtight) storage bags to mitigate aflatoxin development in stored maize. Using cross-sectional follow up data on aflatoxins levels and drying and storage practices from 2019 along with baseline demographic data from 2016, we estimate both the longer-term intention-to-treat (ITT) effects and the treatment on the treated (TOT) effects that the four inputs provided on households’ aflatoxins levels in stored maize. The ITT analyses estimate the intervention’s average effect by treatment group, but this may underestimate the true impact for households who complied with recommended post-harvest practices and adopted the recommended technologies. The TOT analyses estimate the local average treatment effects (LATE) of the intervention, that is its impacts on those who were driven by the intervention to follow best practices or use a given technology. Since the decision to follow these practices or adopt a technology was not random, we instrumented the usage decision with the exogenous, random treatment group assignment to get an unbiased estimate. Outside of our main models, we conducted a heterogeneity analysis to test if households with different characteristics benefit differently from the intervention. We interacted each treatment assignment with various household characteristics, including the woman’s level of involvement in the intervention. Additionally, we estimate the cost-effectiveness of providing training and a tarp, according to WHO guidelines for public health interventions. </p>

The primary role of this report is to provide an in-depth analysis of all the instances of the word vidua, its meanings and uses in Latin literature from the last two centuries B.C. This close examination of the word vidua in the literary sources of this period has resulted in a number of important modifications to its definition. The word vidua, which is commonly translated by ancient scholars as widow, is not sustained by the contextual evidence of the majority of the passages that do no state explicitly the reason for the women's deprived status. Instead the word is most commonly used to mean a much broader social group of Roman women, all no longer married women, a category which includes various groups of women such as widows, divorcees, abandoned women and women whose husbands have been away for long periods of time. Furthermore the English word unmarried should not be used to translate the Latin word vidua since, as I demonstrate throughout my paper, there is a clear distinction in the Roman minds between women who are no longer married, vidua, and women who are not yet married, virgines an important distinction that gets lost with the more inclusive and broader social category meant by the word unmarried. / text

Syfte: Syftet med denna uppsats är att undersöka hur företag inom besöksnäringen i Stockholms skärgård samarbetar och om samarbete kan leda till längre säsonger. Samt huruvida de statligt finansierade utvecklingsprojekten i skärgården bidragit till längre säsonger enligt de undersökta företagen. Metod: I denna studie har en kvalitativ metod i form av semi-strukturerade intervjuer används för insamling av empiri. Sex företag på två skärgårdsöar har intervjuats och används som empiriskt huvudmaterial men även en intervju som gjorts med Värmdö kommun har fått ligga till grund för en del av det empiriska materialet. Slutsatser: Det har under studien framkommit att samarbete mellan lokala aktörer är en viktig del i utvecklingen av destinationen. Samarbetet är inte bara en del i utvecklingen utan kan också vara en hjälp till att förlänga säsongerna. Utvecklingsprojekten har enligt företagarna som intervjuats ej gynnat dem. Det framgår att företagarna anser att det är de själva som måste jobba hårt om de ska se någon förändring. / Purpose: The purpose of this paper is to investigate how companies in the tourism industry in the Stockholm archipelago cooperate and whether cooperation can lead to longer seasons. As well as if the state-funded development projects in the archipelago have contributed to longer seasons according to the investigated companies. Methodology: In this study, a qualitative method in the form of semi-structured interviews has been used for the gathering of empirical data. Six companies on two archipelago islands have been interviewed and used as main empirical material, but an interview with Värmdö municipality has also formed the basis for some of the empirical material. Conclusions: During this study, it has been found that cooperation between local actors is an important part of the development of the destination. Not only is the cooperation a part of the destination development, it can also help extend the season. According to the interviewees, the development projects have not benefited them. It is apparent that the entrepreneurs believe that they themselves that must work hard for any change to happen.

In the stories of olden times and in those of our own American Indians, we learned of the picture writing of primitive peoples. It became an early method of recording people's thoughts. This was a very useful method at a time when the race was young. This in turn was the beginning of our alphabet, later the beginning of shaping letters into words, and then word into sentences and paragraphs. As our world has grown older, new idea have come into use and we are no longer content to live as our grandparents lived. We travel by fast express trains, high powered auto- mobiles, airplanes, or zeppelins. The radio gives us the news before our papers containing it are on the street. are not able to talk with people on the other side of the world. Business men find this a very valuable means of doing business when time means money. The motion pictures bring us the story of the book we have not had time to read and the characters from its pages talk to us from the screen. In short, we must have quicker ways of doing things.

<p>Proučavane su koroziona postojanost i tendencija lepljenja različitih<br />materijala u kontaktu sa tečnom Al&ndash;Si&ndash;Cu legurom. Ispitivanjem su<br />obuhvaćeni čelik za rad na toplo, plazma nitrirani čelik i dupleks<br />slojevi sa CrN, TiAlN, TiAlSiN i CrAlN prevlakama, različitog nivoa<br />površinske hrapavosti. Za ispitivanja pomenutih fenomena<br />primenjena je metoda izvlačenja, koja je unapređena kako bi se povećale<br />njena tačnost i verodostojnost simulacije procesa livenja. Korozioni<br />efekti su pojačani tako što su uzorci osim kratkog kontakta sa odlivkom<br />zadržavani i u dužim periodima u kontaktu sa tečnom legurom (5 i 20<br />min). Uprkos opštim stavovima, za ispitivane materijale je<br />ustanovljeno da su sile izvlačenja uzoraka iz Al&ndash;Si&ndash;Cu odlivaka<br />nezavisne od njihovog hemijskog sastava. Uticaj hrapavosti je izražen<br />kod uzoraka sa prevlakama kod kojih pri smanjenju hrapavosti dolazi do<br />povećanja sile izvlačenja. Sve ispitane prevlake su sklone mehaničkom<br />lepljenju Al&ndash;Si&ndash;Cu legure za svoje površine, ali sa aspekta korozije u<br />tečnom metalu značajno prevazilaze performanse čelika i plazma<br />nitriranog sloja. Duži kontakt livene legure sa površinama prevlaka<br />uzrokovao je niže vrednosti sila izvlačenja, što je posledica<br />oksidacije površina prevlaka. Ustanovljeno je da su ispitivane<br />prevlake inertne ka tečnoj leguri aluminijuma. Međutim, dolazi do<br />oksidacije i korozije materijala podloge kroz greške rasta koje su<br />prisutne u prevlakama. Stečena znanja o identifikovanim<br />mehanizmima habanja i propadanja zaštitnih slojeva prevlaka<br />poslužiće daljem razvoju dupleks slojeva namenjenih za zaštitu alata<br />za livenje pod pritiskom.</p> / <p>Corrosion resistance and soldering tendency of different materials in molten<br />Al&ndash;Si&ndash;Cu alloy were studied. Hot-working tool steel, plasma nitrided steel and<br />duplex layers with CrN, TiAlN, TiAlSiN and CrAlN top coatings, which were<br />produced to various degree of surface roughness, were covered by the study.<br />An ejection test was employed for investigation of the concerned phenomena.<br />The ejection test was improved in order to increase its accuracy and the<br />reliability of process simulation. Samples were examined in both short and<br />extended periods of contact (5 and 20 min) with liquid casting. Casting<br />solidification was extended in order to intensify the corrosion effects. Contrary<br />to common findings, it was found that the ejection force of the investigated<br />materials does not depend on their chemical composition. For the coated<br />samples, a pronounced dependence of the ejection force on the surface<br />roughness was found. The ejection force increases with decrease in surface<br />roughness. All investigated coatings are prone to mechanical soldering by Al&ndash;<br />Si&ndash;Cu alloy. Still, their corrosion resistance substantially exceeds the corrosion<br />resistance of steel and plasma nitrided layer. Longer exposure of coated<br />samples to cast alloy induced lower ejection forces, which is a consequence<br />of coatings oxidation. It was found that the investigated coatings are inert to<br />liquid aluminium. However, the underlying material undergoes oxidation and<br />corrosion through coating growth defects. The findings concerning the wear<br />mechanisms of protective layers support further development of duplex layers<br />intended for die casting tools protection.</p>

Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt. Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket. Vidare har treskiktsskivor tagits fram för att testa om det går att få en stabil konstruktion genom att variera tjockleken på spärrskiktet. Även skillnader i acklimatiseringstid och fuktkvotens inverkan för virkets återfjädring har studerats. Resultaten visar på att aspens hårdhet efter komprimering blir i samma nivå som bok och ask, en låg fuktkkvot vid komprimering av materialet ger en låg återfjädring, komprimerat material har en längre acklimatiseringstid till jämviktsfuktkvot och materialet går att låsa tvärs fiberriktningen i en treskiktskonstruktion. / To make wood harder it can be densified. This can be achieved by compression, the compressed material tends to return to the original shape when it is exposed to moisture fluxations and if no form of fixation occurs. The fixation can be done mechanically in a three-layer panel construction which reduce movements in the timber. These panels have been found to be unstable and previous attempts have shown deformations in form of cupping. This study aims to evaluate the conditions for using compressed aspen wood, and to provide a basis for development of a commercial product. Practical tests have been conducted to study hardness, springback and density of the compressed wood. In addition, three-layer panels have been developed to test whether it is possible to have a stable construction by varying the thickness of the buttom layer. Differences in acclimatisation time and the moisture contents effect on the springback has aslo been studied. The results show that the hardness of aspen wood after compression is in equal levels with beech and ashes, a low moisture contet provides a low springback, compressed timber have a longer time for acclimatisation and it is possible to fixate the material in the direction across the grain in a three-layer panel construction.

<p>Hårdgörning av trä syftar till att göra materialet hårdare. Detta går att åstadkomma genom komprimering, det komprimerade materialet tenderar dock att återgå mot sin ursprungsform då materialet utsätts för fukt om ingen låsning sker. Låsningen kan ske mekaniskt i en treskiktskonstruktion som motverkar träets fuktrörelser. Dessa skivor har dock visat sig vara instabila och tidigare försök har uppvisat deformationer i form av kupning. Denna undersökning syftar till att utreda förutsättningarna för att använda komprimerad asp samt att ta fram underlag för framtagning av en kommersiell produkt.</p><p>Praktiska tester har genomförts för att studera hårdhet, återfjädring och densitet hos det komprimerade virket. Vidare har treskiktsskivor tagits fram för att testa om det går att få en stabil konstruktion genom att variera tjockleken på spärrskiktet. Även skillnader i acklimatiseringstid och fuktkvotens inverkan för virkets återfjädring har studerats.</p><p>Resultaten visar på att aspens hårdhet efter komprimering blir i samma nivå som bok och ask, en låg fuktkkvot vid komprimering av materialet ger en låg återfjädring, komprimerat material har en längre acklimatiseringstid till jämviktsfuktkvot och materialet går att låsa tvärs fiberriktningen i en treskiktskonstruktion.</p> / <p>To make wood harder it can be densified. This can be achieved by compression, the compressed material tends to return to the original shape when it is exposed to moisture fluxations and if no form of fixation occurs. The fixation can be done mechanically in a three-layer panel construction which reduce movements in the timber. These panels have been found to be unstable and previous attempts have shown deformations in form of cupping. This study aims to evaluate the conditions for using compressed aspen wood, and to provide a basis for development of a commercial product.</p><p>Practical tests have been conducted to study hardness, springback and density of the compressed wood. In addition, three-layer panels have been developed to test whether it is possible to have a stable construction by varying the thickness of the buttom layer. Differences in acclimatisation time and the moisture contents effect on the springback has aslo been studied.</p><p>The results show that the hardness of aspen wood after compression is in equal levels with beech and ashes, a low moisture contet provides a low springback, compressed timber have a longer time for acclimatisation and it is possible to fixate the material in the direction across the grain in a three-layer panel construction.</p>