Staphylococcal leukocidin pores are formed by the obligatory interaction of two distinct polypeptides, one of class F and one of class S, making them unique in the family of β-barrel pore-forming toxins (β-PFTs). By contrast, other β-PFTs form homooligomeric pores. For example, the staphylococcal α- hemolysin is a homoheptamer. Limited and controversial data exist on the assembly and molecular architecture of the leukocidin pore. In this work, biochemical and biophysical methods were used to characterize the leukocidin pore produced by the LukF (HlgB) and LukS (HlgC) components encoded by Staphylococcus aureus. I demonstrate that LukF and LukS assemble to form an SDS-stable pore on rabbit erythrocyte membranes. In addition, the pore-forming properties of recombinant leukocidin were investigated with planar lipid bilayers. Although leukocidins and staphylococcal α-hemolysin share partial sequence identity and related folds, LukF and LukS produce a pore with a unitary conductance of 2.5 nS (1 M KCl, 5 mM HEPES, pH 7.4), which is over three times greater than that of α-hemolysin measured under the same conditions. The subunit composition and stoichiometry of a leukocidin pore were determined by two independent methods, gel shift electrophoresis and sitespecific chemical modification during single channel recording. Four LukF and four LukS subunits were shown to co-assemble into an octameric transmembrane structure. The existence of an additional subunit in part explains properties of the leukocidin pore, such as its high conductance. Additionally, this is the first time that either technique has been applied successfully to assess the composition of a heteromeric membrane protein. It is also relevant to understanding the mechanism of assembly of β-PFT pores, and suggests new possibilities for engineering these proteins. In additional studies, the HlyII pore encoded by Bacillus cereus was found to form a homoheptameric transmembrane pore with properties conforming in general with those of other members of the class of β-PFTs. HlyII possesses additional properties which make it an attractive candidate for applications in biotechnology, such as an oligomer with a high thermal stability in the presence of SDS and the ability of the pore to remain open at high transmembrane potentials.

Proteine spielen auf der zellulären Ebene eines Organismus eine fundamentale Rolle. Sie sind quasi die „Maschinen“ der Zelle. Ihre Bedeutung wird nicht zuletzt in ihrem Namen deutlich, welcher 1838 erstmals von J. Berzelius verwendet wurde und „das Erste“, „das Wichtigste“ bedeutet. Proteine sind aus Aminosäuren aufgebaute Moleküle. Unter physiologischen Bedingungen besitzen sie eine definierte dreidimensionale Gestalt, welche für ihre biologische Funktion bestimmend ist. Es wird heutzutage davon ausgegangen, dass diese dreidimensionale, stabile Struktur von Proteinen eindeutig durch die Abfolge der einzelnen Aminosäuren, der Sequenz, bestimmt ist. Diese Abfolge ist für jedes Protein in der Desoxyribonukleinsäure (DNS) gespeichert. Es ist allerdings eines der größten ungelösten Probleme der letzten Jahrzehnte, wie die Beziehung zwischen Sequenz und 3D-Struktur tatsächlich aussieht. Die Beantwortung dieser Fragestellung erfordert interdisziplinäre Ansätze aus Biologie, Informatik und Physik. In dieser Arbeit werden mit Hilfe von Methoden der theoretischen (Bio-) Physik einige der damit verbundenen Aspekte untersucht. Das Hauptaugenmerk liegt dabei auf Wechselwirkungen der einzelnen Aminosäuren eines Proteins untereinander, wofür in dieser Arbeit ein entsprechendes Energiemodell entwickelt wurde. Es werden Grundzustände sowie Energielandschaften untersucht und mit experimentellen Daten verglichen. Die Stärke der Wechselwirkung einzelner Aminosäuren erlaubt zusätzlich Aussagen über die Stabilität von Proteinen bezüglich mechanischer Kräfte. Die vorliegende Arbeit unterteilt sich wie folgt: Kapitel 2 dient der Einleitung und stellt Proteine und ihre Funktionen dar. Kapitel 3 stellt die Modellierung der Proteinstrukturen in zwei verschiedenen Modellen vor, welche in dieser Arbeit entwickelt wurden, um 3D-Strukturen von Proteinen zu beschreiben. Anschließend wird in Kapitel 4 ein Algorithmus zum Auffinden des exakten Energieminimums dargestellt. Kapitel 5 beschäftigt sich mit der Frage, wie eine geeignete diskrete Energiefunktion aus experimentellen Daten gewonnen werden kann. In Kapitel 6 werden erste Ergebnisse dieses Modells dargestellt. Der Frage, ob der experimentell bestimmte Zustand dem energetischen Grundzustand eines Proteins entspricht, wird in Kapitel 7 nachgegangen. Die beiden Kapitel 8 und 9 zeigen die Anwendung des Modells an zwei Proteinen, dem Tryptophan cage protein als dem kleinsten, stabilen Protein und Kinesin, einem Motorprotein, für welches 2007 aufschlussreiche Experimente zur mechanischen Stabilität durchgeführt wurden. Kapitel 10 bis 12 widmen sich Membranproteinen. Dabei beschäftigt sich Kapitel 10 mit der Vorhersage von stabilen Bereichen (sog. Entfaltungsbarrieren) unter externer Krafteinwirkung. Zu Beginn wird eine kurze Einleitung zu Membranproteinen gegeben. Im folgenden Kapitel 11 wird die Entfaltung mit Hilfe des Modells und Monte-Carlo-Techniken simuliert. Mit dem an Membranproteine angepassten Wechselwirkungsmodell ist es möglich, den Einfluss von Mutationen auch ohne explizite strukturelle Informationen vorherzusagen. Dieses Thema wird in Kapitel 12 diskutiert. Die Beziehung zwischen Primär- und Tertiärstruktur eines Proteins wird in Kapitel 13 behandelt. Es wird ein Ansatz skizziert, welcher in der Lage ist, Strukturbeziehungen zwischen Proteinen zu detektieren, die mit herkömmlichen Methoden der Bioinformatik nicht gefunden werden können. Die letzten beiden Kapitel schließlich geben eine Zusammenfassung bzw. einen Ausblick auf künftige Entwicklungen und Anwendungen des Modells.

Relatively little is known about the folding and stability of membrane proteins. Conventional thermal or chemical unfolding techniques probe the average behavior of large numbers of molecules and thus cannot resolve co-existing minor and major unfolding pathways and intermediates. Here, I applied single-molecule force measurements based on an atomic force microscope (AFM) to characterize the stability of the membrane protein bacteriorhodopsin (BR). In these mechanical unfolding experiments, an external pulling force played the role of the denaturant and lead to unfolding of the three-dimensional structure of individual proteins. It was found that single BRs unfold step-wise in a well-defined sequence of stable intermediates and in different unfolding pathways. Although single [alpha]-helices were sufficiently stable to unfold in individual steps they also exhibited certain probabilities to unfold in pairs. These observations support the "two-stage" and the "helical-hairpin" model of membrane protein folding. Dynamic force measurements showed that [alpha]-helices and helical hairpins are relatively rigid structures, which are stabilized by narrow energy barriers and have stabilities between 100-10?000 seconds. These forced unfolding experiments were complemented with the development of new force measurement techniques. It is demonstrated that hydrodynamic effects need to be considered to obtain more complete kinetic pictures of single molecules. In addition, two force spectroscopy approaches to measure the complex visco-elastic response of single molecules are presented and applied to BR. These experiments revealed that the unfolding patterns of single proteins are dominated by purely elastic polypeptide extension and determined the dissipative interactions associated with the unfolding of single [alpha]-helices. In addition, it was found that kinks result in a reduced unfolding cooperativity of [alpha]-helices.

Selective ion and solute transport across cell membranes is a vital process occurring in all types of cells. Evolutionarily developed transport proteins work as membrane-embedded molecular machines, which alternately open a gate on each side of the membrane to bind and translocate specific ions. Sodium/proton exchange plays a crucial role in maintaining cytoplasmic pH and membrane potential, while, if not regulated, the process causes severe heart diseases in humans. Here I applied single-molecule force spectroscopy to investigate molecular interactions determining the structural stability of the sodium/proton antiporter NhaA of Escherichia coli, which serves as a model system for this class of proteins. Mechanical pulling of NhaA molecules embedded in the native lipid bilayer caused a step-wise unfolding of the protein and provided insights into its stability. Modified experiments allowed observing refolding of NhaA molecules and estimating folding kinetics for individual structural elements, as well as detecting eventual misfolded conformations of the protein. The activity of NhaA increases 2000fold upon switching pH from 6 to 8. Single-molecule force measurements revealed a reversible change in molecular interactions within the ligand-binding site of the transporter at pH 5.5. The effect was enhanced in the presence of sodium ions. The observation suggests an early activation stage of the protein and provides new insights into the functioning mechanism. When studying interactions of NhaA with the inhibitor 2-aminoperimidine, I exploited single-molecule force measurements to validate the binding mechanism and to describe quantitatively formation of the protein:inhibitor complex. The ability of single-molecule force measurements to probe structurally and functionally important interactions of membrane proteins opens new prospects for using the approach in protein science and applied research.

The fundamental goal of proteomics is to gain an understanding of the expression and function of the proteome on the level of individual proteins, on the level of defined cell types and on the level of the entire organism. In this thesis, the human proteome is explored using membrane protein topology prediction methods to define the human membrane proteome and by global protein expression profiling, which relies on a complex study of the location and expression levels of proteins in tissues and cells. A whole-proteome analysis was performed based on the predicted protein-coding genes of humans using a selection of membrane protein topology prediction methods. The study used a majority decision-based method, which estimated that approximately 26% of the human genes encode for a membrane protein. The prediction results are displayed in a visualization tool to facilitate the selection of antigens to be used for antibody generation. Global protein expression profiles in a large number of cells and tissues in the human body were analyzed for more than 4000 protein targets, based on data from the antibody-based immunohistochemistry and immunofluorescence methods within the framework of the Human Protein Atlas project. The results revealed few cell-type specific proteins and a high fraction of human proteins expressed in most cells, suggesting that cell and tissue specificity is attained by a fine-tuned regulation of protein levels. The expression profiles were also used to analyze the relationship between 45 cell lines by hierarchical clustering and principal component analysis. The global protein expression patterns overall reflected the tumor origin of the cells, and also allowed for identification of proteins of importance for distinguishing different categories of cell lines, as defined by phenotype of progenitor cell. In addition, the protein distribution in 16 subcellular compartments in three of the human cell lines was mapped. A large fraction of proteins were localized in two or more compartments and, in line with previous results, a majority of proteins were detected in all three cell lines. Finally, mass spectrometry-based protein expression levels were compared to RNA-seq-based transcript expression levels in three cell lines. Highly ubiquitous mRNA expression was found and the changes of expression levels between the cell lines showed high correlations between proteins and transcripts. Large general differences in abundance of proteins from various functional classes were observed. A comparison between categories based on expression levels revealed that, in general, genes with varying expression levels between the cell lines or only expressed in one cell line were highly enriched for cell-surface proteins. These studies show a path for a systematic analysis to characterize the proteome in human cells, tissues and organs. / QC 20110317 / The Human Protein Atlas project

Anion exchanger 1 (AE1) is a 95 kDa glycoprotein that facilitates Cl-/HCO3- exchange across the erythrocyte plasma membrane. Seven conserved tryptophan (Trp) residues are in the AE1 membrane domain; at the membrane interface (Trp648, Trp662, and Trp723), in transmembrane segment (TM) 4 (Trp492 and Trp496), and in hydrophilic loops (Trp831, and Trp848). All 7 Trp residues were individually mutated into alanine (Ala) and phenylalanine (Phe) and transiently expressed in human embryonic kidney (HEK)-293 cells. The 7 Trp residues could be grouped into three classes according to the impact of the mutations on the functional expression of AE1: class 1, normal expression, class 2, expression decreased, and class 3, expression decreased by Ala substitution. These results indicate that Trp residues play differential roles in AE1 expression depending on their location in the protein and suggest that Trp mutants with a low expression are misfolded and retained in the ER.

Anion exchanger 1 (AE1) is a 95 kDa glycoprotein that facilitates Cl-/HCO3- exchange across the erythrocyte plasma membrane. Seven conserved tryptophan (Trp) residues are in the AE1 membrane domain; at the membrane interface (Trp648, Trp662, and Trp723), in transmembrane segment (TM) 4 (Trp492 and Trp496), and in hydrophilic loops (Trp831, and Trp848). All 7 Trp residues were individually mutated into alanine (Ala) and phenylalanine (Phe) and transiently expressed in human embryonic kidney (HEK)-293 cells. The 7 Trp residues could be grouped into three classes according to the impact of the mutations on the functional expression of AE1: class 1, normal expression, class 2, expression decreased, and class 3, expression decreased by Ala substitution. These results indicate that Trp residues play differential roles in AE1 expression depending on their location in the protein and suggest that Trp mutants with a low expression are misfolded and retained in the ER.

Most membrane proteins are inserted into the membrane co-translationally utilizing the translocon, which allows a sufficiently long and hydrophobic stretch of amino acids to partition into the membrane. However, X-ray structures of membrane proteins have revealed that some transmembrane helices (TMHs) are surprisingly hydrophilic. These marginally hydrophobic transmembrane helices (mTMH) are not recognized as TMHs by the translocon in the absence of local sequence context. We have studied three native mTMHs, which were previously shown to depend on a subsequent TMH for membrane insertion. Their recognition was not due to specific interactions. Instead, the presence of basic amino acids in their cytoplasmic loop allowed membrane insertion of one of them. In the other two, basic residues are not sufficient unless followed by another, hydrophobic TMH. Post-insertional repositioning are another way to bring hydrophilic residues into the membrane. We show how four long TMHs with hydrophilic residues seen in X-ray structures, are initially inserted as much shorter membrane-embedded segments. Tilting is thus induced after membrane-insertion, probably through tertiary packing interactions within the protein. Aquaporin 1 illustrates how a mTMH can shape membrane protein folding and how repositioning can be important in post-insertional folding. It initially adopts a four-helical intermediate, where mTMH2 and TMH4 are not inserted into the membrane. Consequently, TMH3 is inserted in an inverted orientation. The final conformation with six TMHs is formed by TMH2 and 4 entering the membrane and TMH3 rotating 180°. Based on experimental and computational results, we propose a mechanism for the initial step in the folding of AQP1: A shift of TMH3 out from membrane core allows the preceding regions to enter the membrane, which provides flexibility for TMH3 to re-insert in its correct orientation. / <p>At the time of the doctoral defense, the following paper was unpublished and had a status as follows: Paper 2: Manuscript.</p>

As one of the mechanisms of antibiotic resistance, bacteria use several families of membrane-embedded α-helical transporters to remove cytotoxic molecules from the cell. The small multidrug resistance protein family (SMR) is one such group of drug transporters that because of their relative small size [ca. 110 residues with four transmembrane (TM) helices] must form at the minimum dimers to efflux drugs. We have used the SMR homologue Hsmr from Halobacterium salinarum to investigate the oligomerization properties of the protein family at TM helix 4. We produced point mutations along the length of the TM4 helix in the full length Hsmr protein and assayed their dimerization and functional properties via SDS-PAGE and bacterial cell growth assays. We found that Hsmr forms functionally dependent dimers via an evolutionarily conserved 90GLxLIxxGV98 small residue heptad repeat. Upon investigation of the large hydrophobic residues in this motif by substituting each large residue to Ile, Leu, Met, Phe, and Val, we determined that Hsmr efflux function relies on an optimal level of dimerization. While some substitutions led to either decreased or increased dimer and substrate-binding strength, several Ile94 and Val98 mutants were equal to wild type dimerization levels but were nonfunctional, leading to the hypothesis of a mechanistic role at TM4 in addition to the locus of dimerization. The functionally sensitive TM4 dimer represents a potential target for SMR inhibition using a synthetic TM4 peptide mimetic. Using exponential decay measurements from a real-time cellular efflux assay, we observed the efflux decay constant was decreased by up to ~60% after treatment with the TM4 peptide inhibitor compared to control peptide treatments. Our results suggest that this approach could conceivably be used to design hydrophobic peptides for disruption of key TM-TM interactions of membrane proteins, and represent a valuable route to the discovery of new therapeutics.

The overall aim of this thesis is to investigate strategies to aid in the measurement of G-protein coupled receptor (GPCR) activity for high-throughput screening and sensing applications. GPCRs are cell surface receptors which have seven membrane spanning domains. They are the largest family of membrane proteins in the human genome and are involved in a number of physiological and pathophysiological pathways. They are the most widely targeted protein family for therapeutics being the target for over 30% of the currently available prescription drugs (Jacoby et al. 2006). For this reason commercial interest and investment into compound screening using these receptors as targets is of high importance in lead drug discovery. Additionally, the extensive ligand range of the GPCR superfamily, which includes light, odorants/ volatiles, neurotransmitters and hormones, make them an attractive biological recognition element in biosensor applications. This thesis demonstrates the functional expression of the H1-histamine, M2-muscarinic and α₂ₐ-adrenergic receptors of the G-protein coupled receptor family, along with their associated G-proteins (Gα, Gβ and Gγ). Expression was achieved using the Sf9/baculovirus expression system. The G-proteins were successfully incorporated into an assay system using time-resolved fluorescence resonance energy transfer (TRFRET). TR-FRET was used in order to create a homogeneous assay format capable of monitoring GPCR activation through the movement of the G-protein subunits. Fluorescence changes in the TR-FRET assay indicated a change in distance between the Gα subunit and Gβγ dimer. The separation of the Gα subunit and the Gβγ dimer after activation resulted in a significant decrease in TR-FRET measurement. The homogeneous set-up of the TR-FRET assay could potentially be adaptable to an array based format. This thesis describes the capture of vesicles containing functional GPCRs onto a solid substrate via the specific interaction between complementary oligonucleotides. GPCR presence and function within the immobilized vesicles, was demonstrated using fluorescent ligands. Further to this, alternative lipid hosts (to the vesicles), known as cubosomes, were introduced. When tagged with an oligonucleotide, these cubosome particles were also shown to immobilize site specifically onto a complementary oligonucleotide surface. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1369537 / Thesis (Ph.D.) -- University of Adelaide, School of Molecular and Biomedical Science, 2009