The current study discusses the preparation and long-term performance of polymer composites used for various purposes under different ageing conditions. The first part deals with the preparation and characterization of polymer nanocomposites based on poly(ethylene-co-butyl acrylate) (EBA–13 and EBA–28 with 13 and 28 wt % butyl acrylate, respectively) and 2–12 wt % (0.5–3 vol %) of aluminum oxide nanoparticles (two types with different specific surface areas and different hydroxyl-group concentrations; uncoated and coated with, respectively, octyltriethoxysilane and aminopropyltriethoxysilane). The nanocomposite with EBA–13 showed better overall nanoparticle dispersion while EBA–28 resulted in poor dispersion, probably due to insufficiently high shear forces acting during extrusion mixing which were unable to break down nanoparticle agglomerates. The activity of hindered phenolic antioxidant (0.2 wt%) in all EBA nanocomposites was assessed by determining the oxidation induction time using DSC. The composites containing uncoated aluminium oxide nanoparticles showed a much shorter initial OIT than the pristine polymer with the same initial concentration of antioxidant, indicating adsorption of antioxidant onto the nanoparticle surfaces. Composites containing coated nanoparticles showed a significantly smaller decrease in the initial OIT, suggesting the replacement of hydroxyl groups with organic silane tails, decreasing the concentration of available adsorption sites on the nanoparticle surfaces. The decrease in OIT with increasing ageing time in dry air at 90 °C of the nanocomposites was slower than that of the unfilled pristine polymer, suggesting a slow release of antioxidant from adsorption sites. The EBA nanocomposites exposed to liquid water at 90°C showed faster decrease of OIT than samples exposed to dry or humid air. The migration rate of antioxidant was controlled by the boundary conditions in the case of ageing in humid air and liquid water. The antioxidant diffusivity was lower for the composites containing uncoated ND than for the composites containing ND coated with octyltriethoxysilane or aminopropyltriethoxysilane. The migration and chemical consumption of deltamethrin DM, (synthetic pyrethroid) and synergist piperonyl butoxide from molded polyethylene sheets was also studied. Deltamethrin and piperonyl butoxide are often used for food  storage and insect control purposes. DM showed no signs of crystallization and remained in a liquid state after being cooled to room temperature. Exposure of polyethylene compound sheets to liquid water (at 80 &amp; 95 °C), caused degradation and hydrolysis of the ester bond in the DM, present in the prepared material, and generated species containing hydroxyl groups. Liquid chromatography and infrared spectroscopy showed a significant migration of the active species in liquid water, whereas in air at 80 °C (60 and 80 %RH) the loss of DM and PBO was negligible over 30 days. The long-term performance of medium-density polyethylene stabilized with six different phenolic antioxidants (0.1 wt%) in aqueous chlorinated media at 70 °C was studied. The results were compared with data for previously studied solutions of antioxidants in squalane (a liquid, low molar mass analogue of polyethylene). A linear relationship was established between the time to reach antioxidant depletion in polyethylene tape samples and the time in squalane samples. Infrared spectroscopy and scanning electron microscopy of drawn samples revealed the onset of surface oxidation and surface embrittlement in tape samples exposed beyond the time for antioxidant depletion. / <p>QC 20121109</p> / Cable insulation materials / Loss of deltamethrin and pipronyl butoxide from polyethylene / long-term performance of polyethylene in chlorine dioxide water

Arsenic and antimony are important trace elements in magmatic-hydrothermal systems, geothermal systems and epithermal deposits, but their partitioning behavior between melt and aqueous fluid is not well understood. The partitioning of arsenic and antimony between aqueous fluid and granitic melt has been studied in the system SiO2-Al2O3-Na2O-K2O-H2O at 800 degree C and 200 MPa. The partition coefficients of As and Sb between aqueous fluid and melt, are 1.4 +- 0.5 and 0.8 +- 0.5, respectively. The partitioning of As is not affected by aluminum saturation index (ASI) or SiO2 content of the melt, or by oxygen fugacity under oxidized conditions (log fO2 > the nickel-nickel oxide buffer, NNO). The partitioning of Sb is independent of and SiO2 content of the melt. However, aluminum saturation index (ASI) does affect Sb partitioning and Sb partition coefficient for peralkaline melt (0.1 +- 0.01) is much smaller than that for metaluminous melts (0.8 +- 0.4) and that for peraluminous melts (1.3 +- 0.7). Thermodynamic calculations show that As(III) is dominant in aqueous fluid at 800 degree C and 200 MPa and XPS analysis of run product glass indicate that only As(III) exists in melt, which confirms the finding that does not affect As partitioning between fluid and melt. XPS analysis of run product glass show that Sb(V) is dominant in melt at oxidized conditions (log fO2 > -10). The peralkaline effect only exhibits on Sb partitioning, not on As partitioning at oxidized conditions, which is consistent with the x-ray photoelectron spectroscopy (XPS) measurements that As(III) and Sb(V) are dominant oxidation states in melt under oxidized conditions, because the peralkaline effect is stronger for pentavalent than trivalent cations. Permeable reactive barriers (PRBs) are an alternative technology to treat mine drainage containing sulfate and heavy metals. Two column experiments were conducted to assess the suitability of an organic carbon (OC) based reactive mixture and an Fe0-bearing organic carbon (FeOC) based reactive mixture, under controlled groundwater flow conditions. The organic carbon (OC) column showed an initial sulfate reduction rate of 0.4 μmol g(oc)-1 d-1 and exhausted its capacity to promote sulfate reduction after 30 pore volumes (PVs), or 9 months of flow. The Fe0-bearing organic carbon (FeOC) column sustained a relative constant sulfate reduction rate of 0.9 μmol g(oc)-1 d-1 for at least 65 PVs (17 months). The microbial enumerations and isotopic measurements indicate that the sulfate reduction was mediated by sulfate reducing bacteria (SRB). The cathodic production of H2 by anaerobic corrosion of Fe probably is the cause of the difference in sulfate reduction rates between the two reactive mixtures. Zero-valent iron can be used to provide an electron donor in sulfate reducing PRBs and Fe0-bearing organic carbon reactive mixture has a potential to improve the performance of organic carbon PRBs. The δ34S values can be used to determine the extent of sulfate reduction, but the fractionation is not consistent between reactive materials. The δ13C values indicate that methanogenesis is occurring in the front part of both columns. Arsenic and antimony in groundwater are great threats to human health. The PRB technology potentially is an efficient and cost-effective approach to remediate organic and inorganic contamination in groundwater. Two column experiments were conducted to assess the rates and capacities of organic carbon (OC) PRB and Fe-bearing organic carbon (FeOC) PRB to remove As and Sb under controlled groundwater flow conditions. The average As removal rate for the OC column was 13 nmole day-1 g-1 (dry weight of organic carbon) and its removal capacity was 11 μmole g-1 (dry weight of organic carbon). The remove rate of the FeOC material was 165 nmole day-1 g-1 (dry weight of organic carbon) and its minimum removal capacity was 105 mole g-1 (dry weight of organic carbon). Antimony removal rate of the OC material decreases from 8.2 to 1.4 nmole day-1 g-1 (dry weight of organic carbon) and its removal capacity is 2.4 μmole g-1 (dry weight of organic carbon). The minimum removal rate of FeOC material is 13 nmole day-1 g-1 (dry weight of organic carbon) and its minimum removal capacity is 8.4 μmole g-1 (dry weight of organic carbon). The As(III) : [As(III)+As(V)] ratio increased from 1% in the influent to 50% at 5.5 cm from the influent end, and to 80% at 15.5 cm from the influent end of the OC column. X-ray absorption near edge spectroscopy (XANES) shows As(III)-sulfide species on solid samples. These results suggest that As(V) is reduced to As(III) both in pore water and precipitate as As sulfides or coprecipitate with iron sulfides. The arsenic reduction rate suggests that As(V) reduction is mediated by bacterial activity in the OC column and that both abiotic reduction and bacterial reduction could be important in FeOC.

Emerging contaminants are defined as synthetic or naturally occurring chemicals or microorganisms that are not currently regulated but have the potential to enter the environment and cause adverse ecological and/or human health effects. With recent development in analytical techniques, emerging contaminants have been detected in wastewater, source water, and finished drinking water. These environmental occurrence data have raised public concern about the fate and ecological impacts of such compounds. Concerns regarding emerging contaminants and the many chemicals that are in use or production necessitate a task to assess their potential health effects and removal efficiency during water treatment. Advanced oxidation processes (AOPs) are attractive and promising technologies for emerging contaminant control due to its capability of mineralizing organic compound via reactions with highly active hydroxyl radicals. However, the nonselective reactivity of hydroxyl radicals and the radical chain reactions make AOPs mechanistically complex processes. In addition, the diversity and complexity of the structure of a large number of emerging contaminants make it difficult and expensive to study the degradation pathways of each contaminant and the fate of the intermediates and byproducts. The intermediates and byproducts that are produced may pose potential effects to human and aquatic ecosystems. Consequently, there is a need to develop first-principle based mechanistic models that can enumerate reaction pathway, calculate concentrations of the byproducts, and estimate their human effects for both water treatment and reuse practices. This dissertation develops methods to predict reaction rate constants for elementary reactions that are identified by a previously developed computer-based reaction pathway generator. Many intermediates and byproducts that are experimentally identified for HO* induced reactions with emerging contaminants include common lower molecular weight organic compounds on the basis of several carbons. These lower carbon intermediates and byproducts also react with HO* at relatively smaller reaction rate constants (i.e., k < 109 M-1s-1) and may significantly affect overall performance of AOPs. In addition, the structures of emerging contaminants with various functional groups are too complicated to model. As a consequence, the rate constant predictors are established based on the conventional organic compounds as an initial approch. A group contribution method (GCM) predicts the aqueous phase hydroxyl radical reaction rate constants for compounds with a wide range of functional groups. The GCM is a first comprehensive tool to predict aqueous phase hydroxyl radical reaction rate constants for reactions that include hydrogen-atom abstraction from a C-H bond and/or a O-H bond by hydroxyl radical, hydroxyl radical addition to a C=C unsaturated bond in alkenes and aromatic compounds, and hydroxyl radical interaction with sulfur-, nitrogen-, or phosphorus-atom-containing compounds. The GCM shows predictability; factor of difference of 2 from literature-reported experimental values. The GCM successfully predicts the hydroxyl radical reaction rate constants for a limited number of emerging contaminants. Linear free energy relationships (LFERs) bridge a kinetic property with a thermochemical property. The LFERs is a new proof-of-concept approach for Ab initio reaction rate constants predictors. The kinetic property represents literature-reported and our experimentally obtained hydroxyl radical reaction rate constants for neutral and ionized compounds. The thermochemical property represents quantum mechanically calculated aqueous phase free energy of activation. Various Ab initio quantum mechanical methods and solvation models are explored to calculate the aqueous phase free energy of activation of reactantas and transition states. The quantum mechanically calculcated aqueous phase free energies of activation are within the acceptable range when compared to those that are obtained from the experiments. These approaches may be applied to other reaction mechanisms to establish a library of rate constant predictions for the mechanistic modeling of AOPs. The predicted kinetic information enables one to identify important pathways of AOP mechanisms that are initiated by hydroxyl radical, and can be used to calculate concentration profiles of parent compounds, intermediates and byproducts. The mechanistic model guides the design of experiments that are used to examine the reaction mechanisms of important intermediates and byproducts and the application of AOPs to real fields.

No description available.

<p>Abstract</p><p>The aim of the present study was to increase the understanding of how the cell surface properties affect the performance of unit operations used in primary protein purification. In particular, the purpose was to develop, set up and apply methods for studies of cell surface properties and cell interactions.</p><p>A method for microbial cell surface fingerprinting using surface plasmon resonance (SPR) is suggested. Four different <em>Escherichia coli </em>strains were used as model cells. Cell surface fingerprints were generated by registration of the interaction between the cells and four different surfaces, with different physical and chemical properties, when a cell suspension was flown over the surface. Significant differences in fingerprint pattern between some of the strains were observed. The physical properties of the cell surfaces were determined using microelectrophoresis, contact angle measurements and aqueous two-phase partitioning and were compared with the SPR fingerprints. The generated cell surface fingerprints and the physical property data were evaluated with multivariate data analysis that showed that the cells were separated into individual groups in a similar way using principal component analysis plots (PCA).</p><p>Studies of the behaviour of the model cells on stirred cell filtration and in an interaction test with different expanded bed adsorption (EBA) adsorbents were performed. It could be concluded that especially one of the strains behaved differently. Differences in the properties of the model cells were indicated by microelectrophoresis and aqueous two-phase partitioning which to some extent correlated with observed differences in behaviour during filtration and in an interaction test with EBA adsorbents.</p><p>The impact of high-pressure homogenisation of <em>E. coli </em>cell extract was examined, with a lab scale and a pilot scale technique. The DNA-fragmentation, visualised with agarose gel electrophoresis, and the resulting change in viscosity was analysed. A short homogenisation time resulted in increased viscosity of the process solution that correlated with increased concentration of released non-fragmented DNA. With longer homogenisation time the viscosity decreased with increasing degree of DNA-fragmentation.</p><p>The results show that strain dependant cell surface properties of<em> E. coli</em> may have an impact on several primary steps in downstream processing.</p>

The contribution of Cys17 and surface-exposed histidine residues in rhG-CSF interaction with Cu(II), Ni(II) and Hg(II) ions chelated by Light Resistant Yellow 2KT-polyethylene glycol derivative was evaluated in aqueous two-phase systems composed of polyethylene glycol (PEG) and dextran. It was determined that His43, His52, His156 and His170 residues are involved in protein interaction with chelated Cu(II) ions. Protein interaction with chelated Ni(II) is governed by His52 and His170 residues, though Cys17 is also involved. The contribution of Cys17 side chain is dominant in the interaction between rhG-CSF and chelated Hg(II) ions. The direct interaction between chelated Hg(II) ions and the –SH group of protein was determined for the first time. Based on the study of the interaction between rhG-CSF and chelated metal ions, rhG-CSF was successfully refolded from inclusion bodies in aqueous two-phase systems PEG-dextran containing chelated Ni(II) or Hg(II) ions for the first time. The refolding of rhG-CSF (C17S) in these systems was more effective compared to that of intact rhG-CSF. The dependence of refolding efficiency of rhG-CSF (C17S) in two-phase systems containing chelated metal ions on the number of histidine mutations was evaluated. It was determined that the refolding efficiency of protein in the systems containing chelated Ni(II) is inversely proportional to the number of histidine mutations. The affinity of purified rhG-CSF (C17S) and its histidine mutants for... [to full text]

Nanoporous carbons have become a material of interest in many applications such as electrochemical double layer capacitors (supercapacitors). Supercapacitors are being studied for their potential in storing electrical energy storage from intermittent sources and in use as power sources that can be charged rapidly. However, a lack of understanding of the charge storage mechanism within a supercapacitor makes it difficult to optimize them. Two components of this challenge are the difficulties in experimentally characterizing the sub-nanoporous structure of carbon electrode materials and the electrical performance of the supercapacitors. This work provides a means to accurately characterize the porous structure of sub-nanoporus carbon materials and identifies the current limitations in characterizing the electrical performance of a supercapacitor cell. Future work may focus on the relationship between the sub-nano porous structure of the carbon electrode and the capacitance of supercapacitors, and on the elucidation of charge storage mechanisms.

Nanoporous carbons have become a material of interest in many applications such as electrochemical double layer capacitors (supercapacitors). Supercapacitors are being studied for their potential in storing electrical energy storage from intermittent sources and in use as power sources that can be charged rapidly. However, a lack of understanding of the charge storage mechanism within a supercapacitor makes it difficult to optimize them. Two components of this challenge are the difficulties in experimentally characterizing the sub-nanoporous structure of carbon electrode materials and the electrical performance of the supercapacitors. This work provides a means to accurately characterize the porous structure of sub-nanoporus carbon materials and identifies the current limitations in characterizing the electrical performance of a supercapacitor cell. Future work may focus on the relationship between the sub-nano porous structure of the carbon electrode and the capacitance of supercapacitors, and on the elucidation of charge storage mechanisms.

The objectives of work presented in this thesis are to understand droplet and particle formulation processes in order to make useful polymer-polymer hybrids in aqueous dispersions and use our fundamental understanding of these processes to: 1. Improve monomer conversion as much as possible. 2. Understand impact of these processes on hybrid film properties. Specific case studies of interest under commercially feasible conditions (i.e. solids content of 50wt %) were done based on two systems namely alkyd-acrylic and polyurethane-acrylic. Miniemulsification, miniemulsion polymerisation and characterisation of hybrid latex, chemical incorporation of alkyd and polyurethane to acrylic monomers were studied in detail. We have been able to successfully synthesise and characterise hybrid latex of about 100nm in particle diameter and high solids content (50wt %) to be used in coating and adhesive applications

The thesis is a summary and discussion of eight papers. During the last decades, precipitation has become increasingly acidic due to the extensive use of fossil fuels. In areas of poorly buffered bedrocks, e.g. Scandinavia, northeastern United States, this phenomenon has resulted in elevated amounts of Al(III) being leached into streams and lakes. Recent findings reveal that these elevated Al-concentrations could cause fish death and decreasing forest production. In the present thesis, the importance of taking naturally occurring substances into consideration when discussing Al(III) in natural waters, is emphasized. On the basis of a chemical characterization of relevant ligand classes in a natural water, the complex formation between Al^+, hydroxide ions and the inorganic ligand carbonic acid, the low-molecular weight organic ligand citric acid and the high-molecular weight model substances gallic acid, 1,2-dihydroxynaphtha-lene-4-sulfonate, 1,2-naphthoquinone-4-sulfonate, pyrocatechol and salicylic acid were investigated. The investigations were performed as series of Potentiometrie titrations and data were processed by means of the least-squares computer program LETAGROPVRID using a technique called pqr-analysis, permitting an unbiased search for complex model (and corresponding equilibrium constants) to be made. In most systems studied, the complexation at high ligand excesses can be described by a series of mononuclear complexes AIL-AIL^. Tentatively, the whole series consists of octahedrally coordinated (water and ligand oxygens) AI(III). At lower ligand excesses, the significance and in some cases even predominance of ternary mono- and polynuclear hydroxo complexes is demonstrated. In two of the systems, binary aluminium hydroxo species are evaluated. The potential importance of the substances with respect to Al-com-plexation in natural waters are indicated in a number of model calculations. The solubility of the clay mineral kaolinite is calculated as a function of -lg[H+] and ligand concentration. It is shown that citric acid, gallic acid, 1,2-dihydroxynaphthalene-4-sulfonate, pyrocatechol and salicylic acid contribute quite significant to the total solubilities, even at very low concentrations. As a complement and background to the equilibrium studies, the corrosion rate for one of the naturally occurring Al-bearing minerals, corundum, is reported. In this investigation, performed with a leach-ant solution of ground-water composition, an experimental technique was employed which made it possible to divide the corrosion into chemical and mechanical losses. / <p>Diss. (sammanfattning) Umeå : Umeå universitet, 1983</p> / digitalisering@umu